Effects/Audio and Video Filters in FCP

Hi, i use FCP 7.0 and all of a sudden, the effects files went missing, i mean the tab is present and it shows all the folders, of video transitions/filters and of audio and all the master templates, but now all of the drop down menu files are gone.??

Check Effect Availabilty and see whether Recommend or All is checked.
Russ

Similar Messages

  • My synchronized clips (audio and video) have lost their compound clip icon after I bought the full version of FCP X, why is that?

    I have noticed a few changes to my FCP workflow after installing FCPX from the trial version I had before. I've noticed that when I sync audio and video files together via Clip > Synchronize Clips.. the icon at the top left corner of the thumnail is no longer there as it was in the trial version. I also have to right click and select 'open in timeline' to work on the files. I much preferred clicking on the thumnail's icon in the event library and it opening up in the timeline. Also Stabilization is missing from my video effects! How odd.

    I no longer have the trial version this is the point. Bought the 'release' version about 6 weeks ago. Still doesn't explain why the stabilization option randomly appears for some clips and not for others. Also would like to know if I can get the compound icon back on the thumbnails for synchonized clips.

  • Does 2 firewire audio and video interface can work together  on FCP ?

    hello,
    My audio interface is a TC Electronic Konnekt 24D
    my video interface is a Canopus ADVC 110
    my hard drives are plugged in firewire too
    and I use Final Cut Pro 5.0.4
    So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
    When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
    I want to use the voice over tool with the konnekt 24D, so what should I do ?
    Does 2 firewire audio and video interface can work together ?
    If so, maybe I only have a driver problem from TC Electronic.
    But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
    thanks
    eMac G4 1,25 Ghz Mac OS X (10.3.9)
    eMac G4 1,25 Ghz 1 Go RAM DDR   Mac OS X (10.3.9)  

    The 1082 does show up as a possible input when I open
    the VO tool.
    Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
    I use my Aja box for export & external monitoring.
    All my audio sources run back into the Tascam and I
    use the analog mixer in the 1082 to monitor different
    sources.
    When I view external video, the audio follows it to
    keep sync.
    that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
    I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
    I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

  • Strange export result in FCP 7- audio and video output not in sync anymore

    I have a problem exporting edited videomaterial. After export audio and video they are not in sync anymore. There's a difference of 8 sec when exporting audio and video separatly. Movie is total 61 min long.
    Video and sequence settings are HDV1080i50, 25fps, 48khz, 16 bit, mono.
    What could that be ?

    Well now that I look at all the clips in FCP more closely I see some clips from the same tape are in sync and others are out of sync.  And one section of tape which I captured twice was in sync on one clip and out of sync on the other.  So it can't be the tapes.
    Maybe the sync problem is caused by not coordinating the tape playing and FCP capturing properly every time! So I will try re-capturing the problem sections of tape.

  • FCP 7.0.2 - audio and video out of sync after QT export! HELP!

    I loaded a self-contained movie of my project and exported it through Compressor. However, half way through the video, the audio and video went out of sync.
    This has never happened before — only since I upgraded to 10.6.3 and FCP 7.0.2/Compressor 3.5.2
    HELP!

    (P.S. I did change the Settings of the FCP from 720p60 to 720p30 about half way through the project, but that shouldn't affect the export.)
    About the time you changed FCP Easy Setup from 720p60 to 720p30 DURING Export?
    As you stated on this post:
    http://discussions.apple.com/thread.jspa?threadID=2384569&tstart=0
    I wouldn't think that's the best time to make a major change.

  • Updated FCP 5.1 to 5.1.2 - Audio and video now out of sync

    I just noticed in my software update that FCP needed to be updated. So I updated the program.
    Now when I open exisiting projects the audio and video are out of sync even though they appear perfectly in sync in the timeline. Has anyone else had this problem? The problem also persists when cutting clips in the timeline. I will use the razor tool to make the cut and I cut the clip on a ceratain frame in the timeline and then in the viewer the clip was really cuts a second or two later. Does anyone know what is going on?
    Very furstrating to say the least. Any help is much appreciated.
    Thanks,
    Clay

    I am still wondering why you're recommending that I use an external drive for this project.
    Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
    I always used external drives, but we had many problems with delays and processing problems.
    At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

  • After Effects CS6 renders audio and video separately. Please help!

    Trying to render a finished video so that I can upload it to Youtube, but having extreme rendering difficulties. The only way my audio and video are combined in one file is when I export the project as a lossless AVI. Best quality for sure, but the size is MUCH too massive. Any other format I try always separates the audio and video. I have no idea why. Any help or suggestions are greatly appreciated. Thanks!

    Sure thing, here you go. If there is anything anyone else needs to see please let me know.

  • How to get audio and video in one file

    hi...I am "premiere beginner user" and I have a simple question , I think..:)...Every time when I am trying to export media out from my premiere (using media encoder) I get video file and some audio files, but what I need is only ONE file, that contains both (audio and video)..for example , I have edited film in hd quality and I want it to export, I choose h.264 format(make some settings,pal,audio quality...) and when it´s "all done", only "result" I get is one video file and two audio files and they are not together :).....so please help mme anyone..ok and as you can see I am not from english speaking country, so sorry for my english...thanks for help....

    There is no indication that something is out-of-sync or the ability to move/slip into sync like in FCE/FCP.
    To the best of my knowledge, using match frame and overwriting the video with video+audio (or attaching it as a connected clip if you don't want to overwrite the video, which might have effects applied) is the best way to do this.
    You can use the blade tool first in the timeline to get just the section you want to get back into sync. Make cuts so that you have a single clip that needs the audio resynced, select it, and use shift-F to select the original synced clip in the Event Browser. Make sure your play head is at the beginning of this video clip in the timeline. Press option-2, then 'q', and now you have the audio back in your timeline, synced with the video.  Delete the old, no-longer-synced audio and you should be set.

  • Audio and video don't open together in viewer when double clicked

    Hello everyone!
    I'm having an annoying problem... it isn't something terribly important, but has decreased my work flow speed. Recently, I've had some trouble opening clips from the timeline in the viewer with the double click.
    If I double click the video portion of the clip, even if both the video and two audio tracks are highlighted (and are still linked) only the video portion of the clip will appear (along with "filters" and "motion" tabs) in the viewer, and similarly when double clicking the audio tracks, though both video and audio are highlighted, only the audio tracks and "Filters" tab show up in the viewer. Additionally, once the item is double clicked at the left with the jigsaw pieces that can be used to set video and audio destinations, if I've clicked on an audio portion so only audio shows up in the viewer, only the jigsaw pieces for the two audio tracks (a1, a2) are visible, video track (v1) is no longer present, and vice versa.
    I'd appreciate any advice that you all have! It's really driving me batty, in addition to not knowing what I did to make it that way, I can't figure out how to change it back!
    Heather

    Thanks for the advice.
    The clips already appeared to be linked, and the selection "link" was checked, however when I unlinked and then relinked I found that the audio and video would open up at the same time in the viewer... problem apparently solved! However, the clips I had been working with I had to nudge audio and video a few frames apart (out of sync) to get the audio and video to line up. (gives the little red box with a +or- number in it on the clip).
    When I unlinked and then relinked, the clip lost those red boxes and went back to being synced (as far as FCP is concerned) with the audio and video unaligned.
    So, the problem appears to be coming from when I move the audio and video of a clip out of sync... why is this? Is this something I'm just going to have to deal with?
    Thanks
    H

  • Audio and Video Performance Tweaking

    Hey guys I'm back with more questions.  I'm trying to improve the overall quality of my video conference experience.   My target market is the elderly and their families, so not necessarly people who are used to computers and tweaking things so we want to make it as good as we can right out of the box.
    Video
    1.)  All of my decoded video has clearly visible blocks.  I've attached a sample screen shot to show what I mean.  Is there a deblocking filter option I'm missing somewhere?
    2.)  The encoder in flash player 10.x is still H.263 based right?  I'm not missing a secret option to use the H.264 encoder am I?
    Audio
    1.)  I've set my audio codec to speex in my audio publisher, and it looks like it defaults to a quality setting of 10 (<rtc:AudioPublisher id="audioPub" codec="{SoundCodec.SPEEX}"/>).  Am I missing any tweaks to improve the audio quality?
    Audio questions where I assume the answer is no but I ask anyway
    2.)  Does the LCCS code or flash player prioritize audio packets over video packets or are they just sent when they're available.  I'd like to sacrafice video for audio if it's possible.
    3.)  Is there a way to better syncronize the video and audio streams.  Right now there's a lot of lag between what is said and how the lips move (this is even with peer to peer on the same private network).   I get the idea that there isn't but I thought I'd ask.
    4.)  Is there anything I can monitor to give me an idea of the current connection performance?   In otherwords can I monitor something and then make my own decicions to reduce the video quality or audio quality based on avaiable bandwidth between the two connected peers?
    5.)  You secretely have echo cancellation built in but were waiting till now to tell me right?  Just kidding.
    Thanks as usual
    -Eric

    Hironmay,
           Thank you for getting back to me, I know I asked a lot in one post there.   It would be nice to have a way for audio packets to be prioritized over video since they need to get there but  you can live with dropped video frames.   I'd love to see a way to sync the audio and video up as well.  I was just reading about some research where they showed if you can watch someones mouth move while you hear them talk it's equivelant to a 20dB volume increase (referrning to how well the person can understand you.)   I have elderly users so something like that is very important to me.
    I agree with you that when I changed the captureAndHeightFactor that the blocks got smaller, but did not go away.  I was hoping there was a way to smooth out the edges of the blocks so the boundries don't look so harsh.   I had been looking at flash.media.video in the flex 3.4 language reference and it talks about deblocking.  I copied the relevent text from the documentaiton at the end of this message.  I was wondering if there was something there I could use.   I'll play around with it some more.
    Believe me I've been very vocal about the need for echo cancellation on the Flash Forums
    Thanks for the help,
    Eric
    relevent text from flash.media.video
    deblocking
    property
    deblocking:intIndicates the type of filter applied to decoded video as part of post-processing.      The default value is 0, which lets the video compressor apply a deblocking filter as needed.
    Compression of video can result in undesired artifacts. You can use the       deblocking property to set filters that reduce blocking and,      for video compressed using the On2 codec, ringing.
    Blocking refers to visible imperfections between the boundaries      of the blocks that compose each video frame. Ringing refers to distorted      edges around elements within a video image.
    Two deblocking filters are available: one in the Sorenson codec and one in the On2 VP6 codec.      In addition, a deringing filter is available when you use the On2 VP6 codec.       To set a filter, use one of the following values:
    0—Lets the video compressor apply the deblocking filter as needed.
    1—Does not use a deblocking filter.
    2—Uses the Sorenson deblocking filter.
    3—For On2 video only, uses the On2 deblocking filter but no deringing filter.
    4—For On2 video only, uses the On2 deblocking and deringing filter.
    5—For On2 video only, uses the On2 deblocking and a higher-performance      On2 deringing filter.
    If a value greater than 2 is selected for video when you are using      the Sorenson codec, the Sorenson decoder defaults to 2.
    Using a deblocking filter has an effect on overall playback performance, and it is usually      not necessary for high-bandwidth video. If a user's system is not powerful enough,       the user may experience difficulties playing back video with a deblocking filter enabled.

  • Photo Booth Audio and Video not in sync!

    I am a YouTube musician. When I go to record I find it easiest to use the video feature in Photo Booth. However, ever since I upgraded to Mountain Lion my audio and video in my videos has been off of one another. They start off together but by the end of the video the audio is ahead of the video. When I went to try and see where it messes up I found that the video jumps frames creating almost a transition effect. I don't know how to fix this and would really like your help!

    Check out the "More Like This" threads over in the right column------------>
    Also check out KB Article http://support.apple.com/kb/HT2090 How to Troubleshoot iSight and EZJim's Website for possible solution to your problem.

  • Why can't Adobe Premiere Pro CC 2014 Time remap Audio and Video together?

    In case you didn't notice, my question is WHY.  I don't know why Premiere Pro can't do this.  From what I understand at the moment, the only way to time-remap audio in any way shape or form using Adobe software is through Adobe After Effects, which my computer has absolutely no chance of running ever.  I know how to do regular stretching of audio in both Audition and Premiere Pro, but apparently I can't time-remap audio using either of these programs.
    So why can't Adobe Premiere Pro time remap audio along with the video?  What's the reason that it can't?  It's a massive disappointment and would be very impressive to see accomplished in the future.  If it's possible to time remap audio and video together in After Effects, that's great and all, except for the fact that I can't use that program.  Why can't it be done in Premiere Pro and will it ever be possible in Premiere Pro?
    Also, will time remapping audio become possible in Audition someday?

    That sounds like a great idea.  File a Feature Request:
    Adobe - Feature Request/Bug Report Form

  • Audio and Video tracks don't go up/down together EVEN when linked selection is checked!

    I'm sure this is something really simple but I just can't figure it out. And it must be a button or a option that I've checked because it didn't use to do that a few days ago.
    Basically, I have a clip on the timeline which has a video and an audio track. I want to move the video clip up to the next video track but I want the audio to move down to the next audio track too. Right now it's not doing that. Only the video file moves up to the next track and the audio clip remains in the same track. How do I fix that so that however many tracks I move the video up by the audio goes down by that same number of tracks?

    Hi Shooternz,
    shooternz wrote:
    Not sure how other NLES manage it but I think it would be a pain if audio  automatically followed video in this respect.  eg Blocked layers b'cos something is already there.
    FCP &, and earlier behaved that way. I prefer the way Premiere Pro does it. You often do not need to move the audio to a different track when you move video to another track. I want to control the placement of audio and video separately now.
    Thanks,
    Kevin

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

  • Audio and Video out of Sync after Pro Res export

    I´m getting an audio/video sync issue when I´m exporting to Pro Res.
    I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
    The sequence is less than 20 minutes long. It plays correctly on the timeline.
    When I export the sequence for DVD and view it on a set top it plays absolutely fine.
    When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
    The audio and video clips are of the exact same duration.
    Possible issues...
    Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
    Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
    Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
    Any help would be greatly appreciated.

    First, yes resample the narration to 48k 16 bit.  You will probably be able to reconnect to the resampled files.  Usually works for me.   That's a simple fix and will probably solve the problem.  If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
    Wait, just reread your original post.  Export from fcp using file:  export:  quicktime movie NOT quicktime conversion with current settings.  If that works without synch issues, use compressor to convert to prores.

Maybe you are looking for