EFS Registered Patent Attorneys using Mac OS 10.8.2

WORK AROUND from the U.S. Patent Office for enabling EFS Registered Filers using EFS Registered Patent Attorneys using Mac OS 10.8.2 to electronically file and access their files in Private Pair:
1.       Have the customer search for the System Preferences on their Mac search tool.
2.       Then have the customer access the Security Privacy option displayed in the System Preferences.
3.       Have the customer select the padlock Icon which will then have them enter their system password.
4.       Once the password has been entered the padlock will display is an unlocked padlock, and once this shows have the customer select the Advance button in the bottom right.
5.       The last check box in the Advance window will be a check box to prevent the auto update of the Java ban list for Macs, so have the customer uncheck this box.
6.       Have the customer hit ok and then have them follow the steps below that Mike sent out for the OS 10.6 fix
(copy of the steps)
1.       Open the Terminal application.
2.       Paste the following command:
sudo /usr/libexec/PlistBuddy -c "Delete :JavaWebComponentVersionMinimum" /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta. plist
3.       You will be prompted to enter your system password. The account being used must have administrator rights on the machine.
4.       If successful, there will not be a confirmation message. Instead, a new prompt will be displayed.
5.       Quit Safari and any other web browsers.
6.       Open Safari and go to the Java test page:
http://www.java.com/en/download/testjava.jsp
7.       If an “Inactive Plug-in” message is displayed, click on it, then click “Enable plug-in”.
8.       Attempt to log into EFS Web or Private PAIR.
If the first opening entry page does not open after completing entry of your password and clicking to go forward, click to go to the Portal Home Page and then click on as either a Register Filer or Private Pair. Good luck.

Tried this with Mac OS Yosemite Ver 10.10 but did not work with Safari nor with Firefox.
Before doing this though, I could not even open the website. Now it does display the web page and executes the java applet.

Similar Messages

How do I register a new used Mac?

I just bought a used MacBook Pro for my sister. How do I re-register and set this Mac up for her?

Use a compatible Mac OS X install DVD(or Lion's recovery partition if that was preloaded) to erase the drive and install a new OS.
(67052)

I can't download track names in iTunes for Mac and get a "User not registered for online use" error

I have a Macbook Pro 13, OS X 10.9.5, and iTunes 12. When I rip a CD it says it can’t find the track names online. When I tell it manually to fetch them it says "User not registered for online use."
On my other Macbook it works fine...

You need to delete two preferences files in your user library. The full instructions can be compiled from various posts in this topic: user not registered for online use I use an older Mac with easy access to the user library before Apple did a mother-knows-best move and hid it in recent OS versions.

I bought a MBPro which came with Lion installed,i also wanted to have a copy of installation disc so i used mac app store.Normally if an app is already bought there is a warning or a sign that informs the buyer.I've charged for this download is it normal?

Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks

Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free.

How to print uspto patent images using Safari and Quicktime

3/18/06
Do you want to know how to print US patent images using Safari? Read on.
When you access the "images" link of a specific patent on the www.uspto.gov/ website using Safari, the page you are viewing is only one small upper left tile of a huge patent image that is not sized to the screen. You can scroll and try to read the page but it's almost impossible. Try to print it out and you only print what's on the screen. Bummer.
The fix:
Place the cursor on the opened image (it may appear blank), hold down the CONTROL key on you keyboard and click on the image. Two instructions come up. Click on the "Save Image to the Desktop" instruction and a DImg.tiff file will be created on your desktop. Click on the .tiff file and it should open in the Preview program, then simply print out the image. Voila!!!!
Click the yellow arrow in the left margin to access page 2 of the patent and repeat the previous instructions to create another .tiff file on your destop. Do every page and you'll have the patent available to print out one page at a time.
You can then rename the files and create a folder for that specific patent so you can access it later without signing onto uspto site.
It's odd that the ever compatible Apple does not provide seamless compatibility to view and print patent images on the US Patent and Trademark Office's website. Where would they be without protecting their own intellectal property? Let's hope the next version of Quicktime includes the appropriate ITU T.6 or CCITT Group 4 (G4) compression language.
Even the "throw it out the Windows" operating system is up to speed on this issue for America's hard working inventors.
Keep on inventing.
Tommy K
imac 400 DV Mac OS X (10.3.9) Cube 450
imac 400 DV Mac OS X (10.3.9) Cube 450

Another similar thread on this issue...
http://discussions.apple.com/thread.jspa?messageID=1602391

How to register youtube videos on mac hard drive?

how to register youtube videos on mac hard drive?
iMac 21.5 po, mid 2010 .Processor Intel i3

You cannot. Doing so would violate YouTube's Terms of Use.
Best of luck.

Used Mac Mini and reinstalling OS X

I bought a used Mac mini (late 2009) with mountain lion installed. The previous owner didn't do a factory reset, so I attempted to by using OS X Utilities and reformatting the hard drive. I then attempted to reinstall OS X, but since I'm not the original registered owner, I can't get past the login dialog during the license verification stage. What should I do at this point?
Any suggestions would be greatly appreciated. Thanks!

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

If buy used Mac how get regular Apple security upgrades,etc? Desperate.

Need to buy an older used Mac. Worried that they wouldn't be able to get regular updates to security, etc., from Apple when I go online.
My present broke old iBook I bot from a store and registered with Apple and so of course was getting regular automatic updates (or upgrades, what do we call em?)
Ain't be gots no money now, so gots no choice but to buy used, from a local, probably off Craigslist.
I've been advised to, of course, insist on the original installation CDs or DVDs (?) that came with it when new bought.
But even so, would i be able to register it for the updates?
And if the original CDs lost and not available, what then? Out of luck? Would that be way too risky and a stupid buy?
And many used macs are described as 'Leopard INSTALLED'. Where would that leave us? What does that mean? I'm guessing it means the OS was just put in from somebody elses CDs and a buyer would be orphaned and unsupported and unable to get extremely necessary regular improvements from Apple.
It is good luck that is wished to those who help me with this.

thelnukus wrote:
Q: OK, thanks, I understand that all OS, whether Tiger or Leopards, whatever, can still be updated. But say I buy said, used, how then can I just go to Apple.com and get registered for regular Updates?
You don't even need to register to get the updates but it would be a good idea.
thelnukus wrote:
You advised: "If the owner does not have the original disks you can get them from Apple by providing the serial number of the Mac."
Q: How much might that cost? If i only have $500 and so have to buy a used mac, would it cost big bucks more to buy these disks? And are these disks essential for safe operation and regular Software Updates for security, etc?
Yes, you should get the disks. Since they are replacement disks they will be very inexpensive.
thelnukus wrote:
You wrote: "To be consistent with the license agreement the seller should also give you that software and license."
Q: Yes, they 'Should', of course. But how important is that 'Should'? What if they doesn't? Whatever the reason (they kept it, they lost it, they never had it, or its been re-sold a few times). If buyer doesn't get the disks for software and license, can they still get regular Updates from Apple online?
Yes.
thelnukus wrote:
Further Q: Some sellers say they can give buyer "BACK-UP Installation Disks". Would such a description be a warning that this is just a suspect unauthorized Copy of the disks, and thus might be a problem or not honored buy Apple? It suggests to me that seller may have a)never had a legit copy themselves, and or b) they are keeping the original and maybe even using it still themselves on another computer, and if I try to register it with Apple so can get updates, Apple might say that it is in use to another, so I'm out of luck.
Yes, if they have backed up the disks and intend to keep a copy, it would be a violation of the software agreement. Their violation, not yours.
-mj

Greeting, I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the in

Greeting,
I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the information on it so could you tell me what kind of encryption will be used or is there any way to recover the information?
Thanks!

I think FileVault is used to encryp internal hard drive but I wanna encrypt an external hard drive with Mac OS Extended Journaled Encrypted which is completely different!

You must register your tables using JDDI before you request them

Hey Guys....
I'm trying to query a custom table created on a SQL Server 2005 database, the same RDBMS for the SAP Web AS. I'm using a different database from the sytem's standard.
I created a Datasource for it. I can get the connection, but when I execute a query I get the following message.
Please note that I used everything SAP recommends for JDBC connector. I have done this previously for an oracle database but this time this approach (MS SQL) is not working...
I don't understand what it means for registering the tables using JDDI.
Could you please show me some light?
java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: SQL statement(s) cannot be executed over DataSource "ZPORTAL". If you are using an Open SQL DataSource, you must register your tables using JDDI before you request them. Reason: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][SQLServer]Invalid object name 'BC_DDDBTABLERT'. [id = Unknown]
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.executeFromAppThread(DataSourceManagerImpl.java:1201)
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.executeInitStatements(DataSourceManagerImpl.java:532)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
     at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
     at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
     at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
     at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
     at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
     at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
     at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
     at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
     at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
     at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
     at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
     at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][SQLServer]Invalid object name 'BC_DDDBTABLERT'.
     at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:98)
     at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:126)
     at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:89)
     at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTabs(CheckColAndTabVisitor.java:247)
     at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:170)
     at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:184)
     at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:42)
     at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:126)
     at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:109)
     at com.sap.sql.jdbc.common.CommonStatementImpl.execute(CommonStatementImpl.java:217)
     at com.sap.engine.services.dbpool.wrappers.StatementWrapper.execute(StatementWrapper.java:167)
     at com.sap.engine.services.dbpool.deploy.DBInitializer.run(DBInitializer.java:69)
     ... 4 more

I changed the SQL Engine parameter to "Vendor SQL" under Additional tab of my datasource configuration

Can I use Mac Dictate to convert voice memos to text?

Can I use Mac Dictate to convert voice memos to text?

If by "Mac Dictate", you mean the built in speech-to-text feature, no, you can't use that to convert a voice memo, at least not easily. Speech-to-text is designed to work on live speech, not recordings. But, there's no harm in trying.

I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding." Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

Do you have a back up?
If you're just trying to recover the photos you can do that much more simply:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
Your photos are inside - these are the originals as imported from your camera.

Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

I just got an HP Deskjet 3050 J610 from my parents, who have never used it. The ink cartridges were still in their wrappers. Trying to set it up tonight, and everything was going well until I tried connecting it to the wireless network.
My router does not have WPS, so I'm having to do this via USB. The software is able to detect my router's SSID, encryption type, and password. However, when trying to connect the printer to the router, it fails. The Wireless Network Test Report claims that it might be because of MAC address filtering. I double checked my router settings, and I am NOT using MAC filtering at all. I have not yet tried rebooting everything (Printer, laptop, router), but I am doubtful that will resolve the issue. For security reasons, I would prefer not to say what security I'm using, but I will say that it IS supported by the printer.
I'm using Windows 7 on an Asus laptop, and my ISP is Verizon Fios.

Hi Manjunath, I spent the last hour on that site. Everything I found was about how to add the printer's MAC address to the router's filter settings. But I repeat, I am NOT using MAC filtering on my router, but the printer thinks I am.
Or rather... THOUGHT I was.
Rebooting the printer and the router helped. Of course, I did both at the same time, so I'm not sure which one was required, or both, but the long and the short of it is, it works now.

I downloaded an upgrade but when I try to put it in the applications, it says the file is locked. when I unlock it, it still doesn't let me drag it, and reverts back to being locked when I close the window. I am using Mac Lion.

I opened Firefox this morning and it told me I needed to download a newer version. I downloaded the new version. I got the image prompting me to drag Firefox to the applications folder. When I do that, it asks if I want to replace the old Firefox, I click 'yes' and enter my password. It tells me the file is locked. I open 'get info', unlock the file and enter my password. It claims I have read and write access privileges. I then try again to drag Firefox to the applications folder - it says the same thing about the file being locked. I check again under 'get info', and Firefox has reverted to being locked again. I unlock it again and without closing that window, i.e. when it is still showing unlocked, I try again to drag it. Same message.
Now I can't use Firefox at all because it has corrupted the old version I was using and I am unable to download the new one.
I am using Mac OS 10.7.2, Lion, on a MacBook Pro.

What exactly is the error you get?
How are you attempting this copy?
There's almost certainly a way to accomplish what you want to do (probably best from the terminal possibly copying the entire user dir and fixing up permissions, etc.) but I'm not sure you will end up with the results you want. There are plists in the preferences dir that you probably don't want to copy over (e.g., many of the com.apple.* prefererences). And many apps also create more than just plists. There may be stuff in Application Support, LaunchAgents, Internet Plug-Ins, etc.). And this would be stuff you do want to copy. Bottom line is it is not a trivial exercise which is probably why the system is slapping your hands for even attempting it

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

EFS Registered Patent Attorneys using Mac OS 10.8.2

Similar Messages

Maybe you are looking for