Either there's no "Open or save as"-Popup, when downloading files (although it's set in preferences) or nothing happens when I click "save as". Please help me. I'm using Iceweasel 7.0.
In my preferences I have enabled:
- Show the downloads window when downloading a file
- Always ask me where to save files
No, I just wonder, if only mods (or something) can close a topic, but ok, I see I can now click "solved it" next to your post. Seems like someone has to post something.^^
Similar Messages
-
i downloaded photoshop after using it as a trial and it appears on my orders under items with serial number but I cannot open application. Nothing happens when I try to start program. I click on photoshop elements and nothing happens
You say you downloaded it, but did you install it? Are you using windows or a mac? And is this PSE 13?
-
I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!
Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen. -
Can't open .jar file, nothing happens when I click, MAC OS 10.6.8
Hello,
I can't open .jar file, nothing happens when I click on the .jar file.
I have MAC OS 10.6.8
The thing it, I have desktop application that I'm building on Netbeans and when I compile and deploy it... it runs from Netbeans folder where I have all the files but copying the .jar on the desktop. It says "The Java JAR file "blablabla.jar" could not be launched check the Console for possible error messages"
Any idea or solution will be appreciated.
Thanks in advance
CharlesThese are Java files. http://www.java.com/en/ is where you can get the latest Java for your operating system. If your Java files need an older version of Java, there are instructions on the web to downgrade Mac Java, but it is difficult, and poses security issues.
-
Photostream to my Windows 7 computer has stopped working. When I open icloud control panel, photostream has become unchecked even though it has been previously checked. I check it again but when I click options, nothing happens. I click apply and close, but next time I open the control panel, Photostream has become unchecked again. What can I do?
Lisaglenoak:
When I first downloaded iCloud to my PC a little while back, Photo Stream initially worked. I was able to check/uncheck both boxes available to me, as well as click the Options tab to the right of Photo Stream. I could make changes, click "Apply", and everything was fine and dandy.
Within a day, I opened the iCloud Control Panel, and despite how many times I would uncheck Bookmarks, it didn't matter. I would click "Apply", and it would automatically ask me to sign in again. When I did this, Bookmarks would be checked again. Additionally, Photo Stream was grayed out; I was unable to check the box (which was unchecked), and I was unable to go to Options.
Somehow, I managed to get my iCloud Control Panel "unstuck", and currently, it is working fine. There are 2 steps that I did to accomplish this. The 1st step listed below may be the crucial element for those whose reinstallation of the program has not succeeded, in and of itself. It is a change that I haven't come across as a possible part of a solution to this problem; I just happened to stumble upon this whilst searching my PC for possible fixes to the problem.
Step 1: Find your iCloud File Folder. (On my PC, I clicked the Start button in the lower left corner, then clicked All Programs, and finally scrolled down to where all the folders for various "things" are.) Click the Folder and a sub-list will appear, with items such as Calendar, Mail, etc. Right-Click the iCloud Program icon, and at the bottom of the list that appears, click on Properties. At the top, there are 5 tabs. Click the Compatibility tab, and you should see, at the top, the following words: "If you have problems with this program and it worked correctly on an earlier version of Windows, select the compatibility mode that matches that earlier version." Following these words is a dropbox underneath "Compatibility Mode", and for some reason - I have no idea why this is - the box was initially checked to run the program in compatibility mode for "Windows XP (Service Pack 2)". (And from what I understand, Windows XP is not a compatible Windows Edition for iCloud, so I have no idea why this box was checked.) If the box underneath "Compatibility Mode" is checked, than it is running iCloud in compatibility mode for any number of earlier Windows' Editions. Uncheck this box, click the "Apply" button, and then click "OK".
Step 2: Find your PC's Control Panel. (On my PC, I clicked the Start button in the lower left corner, and then clicked Control Panel in the list to the right.) In the Control Panel, click Programs. Under Programs and Features, Click "Uninstall a program" (and bear with me here, because you are actually not going to uninstall iCloud). Now, scroll down the list and find "iCloud". Double-click the "iCloud" icon, and a panel with 2 options should appear: "Repair" and "Remove". Check the "Repair" box, which will reinstall the same iCloud Control Panel, replacing missing or damaged files. ("Remove" will just .. well ... remove iCloud from the computer - or, if you prefer, uninstall the program.) Click Next, and the repairing process will begin and end. And that is it - you're done. Task Completed.
Well, in the end, this worked for me. Photo Stream was no longer grayed out. I could permanently uncheck Bookmarks (finally). The Options tab for Photo Stream would open. Anytime that I clicked the "Apply" button after checking/unchecking boxes, it wouldn't ask me to sign in again (only to come back to a Control Panel that looked just like it did before I made any changes to it.). And, I created a Shared Photo Stream on my phone using photos from my Camera Roll (to test the program), and the Shared Photo Stream appeared on my PC's Photo Stream in no time. Hopefully, this will work for you too (regardless of the Windows Edition you are currently using). ~ Brian -
Can't open numbers on my iPhone 5S and iPad mini (1st Gen.) after updating to the new version 2.0.1. Please help!
Okay , you should only delete EMPTY DUPLICATED folders, not preview folders or any others. I would put them all back. Then just delete any DUPLICATED EMPTY folders, do not disturb any other folders. On iOS switch off DOCUMENTS AND DATA under ICLOUD in SETTINGS. Do this on all iOS devices not just the one. Once deleted DUPLICATE FOLDERS on the mac in MOBILE FOLDERS then exit the LIBRARY. Open PAGES on your MAC and view folders on icloud. Check everything is all there as expected. If okay then DELETE and re-install PAGES app on iOS - THEN switch on DATA and DOCUMENTS in ICLOUD. Now open PAGES. If you have Time Machine on you can recover any 'lost' doc files and restore them from your mac from pages application. Try the process again and do not disturb any folders other than ones I mentioned as this is the system files LIBRARY. It is not a place to be over zealous in moving, altering and deleting folders and files. Take care please.
-
all my programs are opening in adobe even the system restore and the regisrty -
how do I reset all programs to their originall default programs.
Please help.
PS I have also tried starting in save mode and still have the same problem.Hi,
As
BurrWalnut mentioned, first please run a virus scan to eliminate virus infection (if AV program is not opened in adobe)
The files association could be corrupted in your situation, apart from the solution posted in the first reply, I also suggest you check Control Panel\All Control Panel Items\Default Programs\Set your Default Programs or Associate a file type or protocol
with a progra,, manually check the association and check if it can do some help.
Add: another way to open restore point is launching it in recovery console, please refer to this guide
http://windows.microsoft.com/en-hk/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7
Yolanda Zhu
TechNet Community Support -
I have an IMac desk top. Safari icon is down at the bottom, but nothing happens when I click it. How do I open safari? Was working fine earlier.
You are in the iPad forum.
Open your Applications folder - find Safari in the applications, and double click on the icon in there. You may have a corrupt alias in the dock at the bottom. -
I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens. Can't slide the power off either. It tells you the time, unlock button, power off button but nothing happens. Voice just tells you the unlock button, time, poweroff button.
Please help also itunes says I need to enter on iPod the passcode to reset to factory. I can't get it open to enter passcode, slider doesn't work. It is one day old and this happen xmas afternoon. PLEASE Help someoneTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I really need this functionality.
Can you send any emails at all indicating that the mail app is working? Did you try any basic stuff yet?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Close those affected apps and restart the iPad. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Having troubles running iTunes! I downloaded iTunes just fine, but when I try to open it, it tells me iTunes is in a locked disk or I dont have permissions to write to this folder. Please help! I purchased an iPod for my son and wanted to put music on it.
Hello there KRerssig,
I was looking through our resources and found an article with information regarding that error message. The article is called iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes found here: http://support.apple.com/kb/HT1866.
Here is the text but the article contains images for a visual reference:
Verify the location of your Windows XP My Music folder. The default location for this folder is
C:\Documents and Settings\username\My Documents\My Music
If you do not have this folder at the default location and have not moved it to another location, consider creating one inside your My Documents folder.
Download and install Tweak UI from the Microsoft PowerToys website athttp://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
Note: This utility is for Windows XP only. Please review the system requirements before installing.
Once you have installed Tweak UI, open it from the Start menu.
In the column on the left, click on the plus symbol next to My Computer and select Special Folders.
In the right pane under Special Folders, choose My Music from the Folder pop-up menu.
Click the Change Location button. You may see a warning message appear with precautions for changing this setting; after reviewing the message, click Yes.
In the resulting window, browse for the My Music folder as described in step 1, and click OK.
Reinstall or open iTunes.
If these steps do not resolve the issue, the settings for the current user may be corrupted, which could cause iTunes not to install or open. You may have to install and open iTunes in a different Windows user account.
All the best,
Sterling -
My play lists and songs on iTunes and on my iPhone won't play. They are light grey instead of black and nothing happens when I click on the songs. All of the songs were either from CD's or from iTunes that I purchased. I have home sharing turned on. This is a new issue. It used to work fine. I tried restarting my iPhone and syncing with iTunes. Neither worked. Please help!
Try delete those songs using iTunes by de-selecting and sync. After that mark those songs and sync again.
-
Hi there, Can you please HELP ME? I created a signature for my email account, but I can not choose it because the option is daded under "none"and nothing happens when you click on it! Thank you, Johan
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
How can I delete apps from the app store? There seems to be every app I have ever downloaded and deleted since I got my phone in 2007. When I go to app store and select update apps there's a menu at the top that says purchased and when I select it it shows every app I've ever had! I would like to delete the history please.
Many thanksYou cannot.
The entire point of this is that you can redownload any and all of your past purchases. -
I have upgraded my iPhone 4s to iOS7. Now my podcasts I have added to ITunes and synced with iPhone do not open. When I touch the screen like in the old iOS6, nothing happens. What is the solution?
Hello irish3kr,
You may need to download and install the Podcasts app.
About the Podcasts app for iOS
http://support.apple.com/kb/HT5295
Cheers,
Allen
Maybe you are looking for
-
Urgent: regarding the increasing the performance of report
Hi, I had a report which is displaying the correct data but i execute on PRD Server,it gets Request Time Out.So i want to increase the performance of it.Plzz help me out in doing this. REPORT ZWIP_STOCK NO STANDARD PAGE HEADING LINE-SIZE 150. TABLES
-
ABAP Mapping dumps while using trace
Hi everybody, I am using the trace object as exposed in http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm trace->trace( level = '1' message = l_trace ). But I get a dump 'NULL' Objectreference. W
-
Question in BDC session method.
Hi guys, I am trying to upload BOM using BDC session method. While doing this, i have learnt the steps by heart. But i do not understrand the logic behind the steps. For example, why do we include this statement Data: IT-BDC like BDCDATA occurs 0 wit
-
Can I register apple ID without credit card?
how?
-
Startup config missing in MDS9020 switch
I get failure message when copying running config to startup config. In bootflash:// I see only running-config and startup-config is missing. is it possible to create startup-config? how do I fix this issue?