EJBs still bound even after undeploying application

Hi,
I am using WebLogic 10.0 MP2 notice that if I undeploy an ear containing Stateless Session EJBs there are still entries for these EJBs in the JNDI server tree. The entries look like <name of Bean>#<full package name of Bean>.
I am undeploying using the WebLogic Console (Deployments->Delete) and see in the log that the deployment goes from STATE_PREPARED to STATE_NEW.
I can fix the issue by deleting the EJBCompilerCache directory but would like to know why they don't get removed as part of the undeploy.
Thanks for any help
Mandy

Hi,
Not I'm not using the autodeploy directory, I am uploading from my local machine to the uploads/ directory.
I don't seem to get any problems when I redeploy the application in a single server but on a cluster I get this issue..
<01-Dec-2010 23:04:35 o'clock GMT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '129124****2336' for task '19'. Error is: 'weblogic.application.ModuleException: Exception activating module: EJBModule(sampleejbs-ejb-0.0.1-SNAPSHOT.jar)
Unable to deploy EJB: JmsAPIConnPoolSonicJmsStatelessSessionBean from sampleejbs-ejb-0.0.1-SNAPSHOT.jar:
[EJB:011008]Unable to bind EJB Home Interface to the JNDI name: sampleejbs-ear-0sampleejbs-ejb-0_0_1-SNAPSHOT_jarJmsAPIConnPoolSonicJmsStatelessSessionBean_HOME.
javax.naming.NameAlreadyBoundException: sampleejbs-ear-0sampleejbs-ejb-0_0_1-SNAPSHOT_jarJmsAPIConnPoolSonicJmsStatelessSessionBean_HOME is already bound; remaining name ''and this:
<01-Dec-2010 23:04:35 o'clock GMT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an object under the name WLPooledWLJmsStatelessSessionBean#com.xx.xxx.test.samples.JmsMessageSender in the JNDI tree. The object from -769998****8669S:xxx05bb01-wl01:[7021,7021,-1,-1,-1,-1,-1]:jcrxxbus1:xxx05bb01-bus1 is non-clusterable, and you have tried to bind more than once from two or more servers. Such objects can only be deployed from one server.>Any ideas much appreciated!
Many thanks
Mandy

Similar Messages

My ipod touch still freezing even after restoring it

plz i need help....my ipod touch still freezing even after restoring it...plz send me email to [email protected]

If you did not restore to factory defaults/new iPod do that. If yuo are still having problem then an appointment at the Genius Bar of an Apple store is in order. You likely have a hardware problem.
You are not addressing Apple here. We are just users like yourself.

Unresponsive system but mouse still moves; even after restart

I was transferring a few files over my LAN wirelessly via file sharing to another macbook (B) when that macbook was closed and caused a disconnect. My macbook (A) has experienced issues since this disconnect. Even after restarts and resetting the pram, my system is unresponsive. The mouse will move but I cannot open applications, folders, files, or even the menu. It is as if my mouse is moving over top a picture of the desktop. I did manage to click and highlight my HD icon once but as soon as I did, the color wheel showed up and never stopped. My hard drive has over 10GB of space free. I was able to do a target disk boot and test the drive and its ok according to disk utility. Any ideas about what I could do would be greatly appreciated...preferably without wiping the hard drive.

The first issue occurred while I was transferring large files from one computer to another via afp file sharing over my wireless network. In the middle of this transfer, someone closed the receiving macbook. The macbook sending the files didn't respond well after this. It would intermittently freeze without a linked resource draining process. I believe the first occurrence was when I tried to right click a file that had been interrupted during transfer. I forced a restart, used the killall Finder command in terminal thinking that it might still be trying to transfer the file to a ghost in some way...even though that didn't make sense. I was able to verify and repair the external drive the file was on. After doing this and resetting the PRAM, it was back to normal for a little while. After a bit of normal activity (nothing strenuous), it began to freeze again. I tried the same steps and also booted in target disk mode so I could use the other macbook to run diagnostics. The drive got repaired. I attempted to restart the affected macbook but I couldn't do anymore than one thing and the never-ending colorwheel would appear. That one thing could be a single click on a file or an attempt of opening an application. After that I turned to this discussion forum after already impatiently attempting to safe mode boot and repair disk permissions. I tried this again with patience after your suggestion. It worked for a few hours and I was able to surf the web once more and go about the usual. I pulled up dashboard and pressed command+ to bring up the list of widgets and it froze on me again. I attempted previous steps again after restarting but there has been no difference in response. Throughout the entirety of this experience, there have been no error messages. Also, there's no difference in behavior if I disconnect everything but the power cable.
Sorry for the lengthy post but hopefully it will be helpful.
Message was edited by: AG_Jazz

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

Preview is STILL frozen even after force quitting, rebooting and reopening. Help?!? I need to see my files!

Not sure what I did, but Preview continues to stay frozen even after force quitting, rebooting and reopening. It seems like it is trying to open all 720 pdf documents I have on my internal memory. That's my best guess... I really don't know what happened. I've tried clicking the 'close windows when closing application' option under general settings and every other thing I've seen listed on help sites... nothing is working. PLEASE HELP?!?

Back up all data. Quit Preview if it's running.
Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Log out and log back in. Launch the application and test.

Still sleeping even after setting Energy Saver to Never

I'm trying to use my 2.53 GHz (Late 2009) MM as a server but even after setting the 'Computer sleep' preference to 'Never' in the Energy Saver System Preferences panel, the MM still goes to sleep. This isn't a big issue for me since I can and have used Wake On Lan apps/scripts, but it's a major pain in the you-know-what for other people who need to access this server over the internet.
Could there be some persistent overriding preference somewhere that is allowing this MM to go to sleep when in fact it should not be because of my setting? I've searched but can find anything.
TIA for any help with this.

Interesting... I had an EyeTV that I did install on an older G5 PowerMac that I stopped using before I migrated to this MM back in March. I'll check to see if the EyeTV app was also migrated over and uninstall it if necessary.
I would have thought that the EyeTV software would default to a "Never Sleep" state considering it's purpose. I'll check this possibility out when I get home after the long weekend.

Serial port is still open even after closing it explicitly

Hello,
I need to close a VI that is using a COM port and use the same port through some other program. But for some reason even after I stop the VI where I explicitly close the com port, I can not still use the hypterterminal to connect to the port. It says port is being used by some other program. What can be the reason? Any thought ?
Thanks,
Ananda

Is the VISA close the last action you perform on the VISA reference?
If not, then your port will probably be opened again, so make sure it's the last one.
Also, I seem to remember reading something about some bug where VISA close wouldn't properly close the port. I would suggest you try searching for it and also make sure you have an updated version of VISA.
Try to take over the world!

Audio/video sync STILL off, even after detaching/extracting audio

So I know it's a well-known problem that the audio and video clips get out of sync upon exporting a movie out of the iMovie application. I also have seen that the solution for this problem is to detach or extract all and any audio clips. I've done this, and I'm still having the problem after exporting my movie (it plays fine in the application).
I detached/extracted my audio clips when I started making my movie, and have been altering them and working with them separately from the video for some time before exporting the movie. Is it possible this has made a difference? I have re-detached the audio multiple times hoping it will solve the sync problem, but with no success
Has anyone else had this problem? I would be so grateful for some help--it's making me crazy!
Thanks in advance.
Kyoko

I'm having the same problem. Imported clips from FlipcamHD. Everything plays fine in iMovie. I have titles, video clips that I've added music, and regular video clips with its own audio. It's a nine-minute video. I detached the audio from the clips that have audio and still the sync after export is not working.

Adobe Creative 6 is still pixelated even after I updated it on my Macbook with Retina display. HELP!

I just purchased the Macbook Retina display and installed my Adobe Creative 6. I mainly use Photoshop, Illustrator, InDesign and Acrobat Pro. When I use these programs, it still appears pixelated even after I updated the software. I've attached screenshots.

Photoshop CS6 and Illustrator CS6 have had updates that add support for Retina Display (generically called HiDPI support). InDesign needs to be updated to a Cocoa interface on the Mac and 64 bit support on Mac and Windows which can't happen until the next version of InDesign. Acrobat 11 was released too early for HiDPI support to happen.
Your screen capture of of InDesign.

Why is my Macbook still slow even after upgrading

Hi everyone, I'm not sure if this has been answered before but here goes.
So I have a Macbook 2.4GHz (13.3-inch Intel Core 2 Duo "Penryn") - Early 2008. Have been using it for the past 6 years without any issues. However during the past 1 year I've noticed that it has started to run slower and slower. Even simple task such as opening Safari might take longer than usual. I do not have much application installed as I only used that computer for surfing the net and making Words & spreadsheet documents. I have about 200GB of free hard disk space out of the 250GB standard HDD along with 2 GB of ram. After doing some research around the forum, I decided it might be a good idea to upgrade the HDD to a faster 7200rpm 750GB HDD drive as well as replacing the ram with new 2x2GB modules. I also did a fresh install of OS X Mountain Lion 10.6.8 (I did not install any other applications). But to no avail, it seems that the computer is still laggy and isn't as snappy as couple of years back. And by laggy I mean that opening pre-installed applications on the Mac such as iPhoto and Safari might still take 4-6 "icon bounces" to open.
So my question is,
1) What might still be causing the lag?
2) Are there any other components on a Macbook that might cause it to slow down?
3) Does components like the CPU degrade over time?
Any help would be highly appreciated.

Your computer isn't getting slower, it's other things demanding faster. If you are installing all the possible updates to software those will be designed for newer computers. Once you start browsing you're browsing a web designed by people who because they spend all their time designing pages they themselves have powerful machines with fast connections because it is their job. It's like if all city streets were designed by racecar drivers. A 2008 computer is already considered vintage by Apple and close to no longer being supported in any manner. Vintage and obsolete products - http://support.apple.com/kb/HT1752 I have an even older computer than you and it is annoying but that's the way things are.
Frankly 4-6 icon bounces doesn't sound long to me. Don't forget that for applications such as iTunes how long it takes to open will also depend upon the size of the library.
I don't think CPUs wear down. Conceivably some slow-down could be the result of excessive bad sectors on a hard drive but you say you replaced that (and I would expect it to have shown more serious symptoms were that happening).
You can use Activity monitor to check your RAM usage. Newer applications and newer OS versions will require much more RAM than posted "minimum" If a computer doesn't have enough RAM it starts using the hard drive which is slower than chips.

After removing malware Firefox is still broken even after uninstall/reinstall, yet other browsers have no problems with links opening multiple unwanted windows.

I removed malware from my new Windows 7 pro 64 bit PC. I have reinstalled Firefox multiple times to try and resolve the problem, even deleting the Mozilla folder from programs on the C drive. Whenever I click on a link on a webpage in Firefox, multiple unwanted tabs and windows open up making Firefox virtually unusable. Resetting Firefox doesn't help. I installed Chrome and do not get these popups. The malware must have caused some damage related to Firefox that will not allow Firefox to function normally even with a fresh install. I would prefer to use Firefox.
I don't recall the name of the malware.

The cause is most likely the preferences file in your profile folder. That file contains your personal settings, so it doesn't get deleted when you reinstall/update Firefox. The reset feature also retains your preferences file.
Instead of doing a mass delete of all your settings, you can try identify the culprits and reset them individually.
# In the [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Click on the '''Status''' column, to sort your preferences by status, and group all the ''user set'' preferences together. They should appear in bold.
# If you see any preference that look suspicious, just '''right-click''' on it, and select '''Reset'''.
If you're still not sure which ones to reset, you can post most of them here easily. Go to '''Help > Troubleshooting Information''' then click '''Copy text to Clipboard'''. Open a reply to this post, and go to '''Edit > Paste''' to paste the info from your Troubleshooting Information page.

AE still crashing even after 12.1 update

Hi all, my first post here,
I foolishly upgraded to Mavericks without backing-up. I know, don't say it.
Anyway, since then AE crashes on opening with this alert:
After Effects Alert
Last log message was: <4486488848> <DynamicLink> <5> /Applications/Adobe After Effects CC/Adobe After Effects CC.app/Contents/dynamiclinkmanager.app
I tried the Mavericks patch when it came out - no luck and now I have the same problem after installing 12.1.
Any idea what's going on?
Mac Pro 4.1 8 core w/ 40gb ram and gtx285 card
Thanks,
Grant

UPDATE: I went to Matrox and installed their newest drivers and now all is good.
Great work Adobe, Matrox and Apple for staying on the same page with this. I'm sure it wasn't easy.

Is still paying even after subscription is cancele...

My CC is still charged for premium subscription even I got a letter from Skype confirming is has been canceled.

Hej Jens and welcome to the Skype Community,
Please check your Skype web account page at www.skype.com/go/myaccount - You still have an active Unlimited subscription that is recurring and for which you are paying monthly. You can cancel the subscription from your account page should you not be using this product. Check the "Usage" listing to see if you are placing calls to destinations covered by this subscription.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Production Order is Still saved even after CK 465 message changed to Error

Hi,
While creating production order in CO01,we are getting one Warning message CK465.I have made that warning message CK 465 as Error Message in configuration.
After that i have created on Production Order in CO01.When i see the Log in CO01,it is showing as Error Message.But the production order is getting saved.
As per the client requirement,when we get that CK 465 -Costing Error,The production order should not be saved,but in my case it is gettings saved,Now what should i do?
The Error Message is:
No price could be determined for material/batch 0118E9152/ plant AX01 @35\QLong text exists@Costing
Kindly advice me how to prevent this production order saved when it is error mode.
Thanks
Supriya

Just a question: Do your Clients have a process to correct the error in production order costing without seeing the Order BOM and Routing? I can think of many examples here that you wouldn't be able to fix without seeing the order. Our acounting dept uses COOIS to review orders with status CSER.

Why the word on search field on my app store still appear even after I deleted it?

it still there eventhough i have deleted my last search.

nope.. it won't go away..
https://discussions.apple.com/message/23469001#23469001 same problem here

EJBs still bound even after undeploying application

Similar Messages

Maybe you are looking for