EKPO table not getting updated with PR numbers

Hi All,
PR and PO is created in APO and then transferred to R/3 system. For all these POs, we can see the PR number in the PO display(ME23n) but when we see in the EKPO table the PR number is missing.
Any pointers as to why this is happenning? whether any SAP notes needs to be implemented?how we can make that PR is updated in EKPO table also?
Any feed abck will be highly appreciated.

Hi,
The problem with having the EKPO hold the requisition number is that you then only have the ability to store ONE PR number.
By storing them on the delivery schedule lines you have the ability to have as many as you like and so you should be looking for these on the delivery schedule lines on the PO item and not on the item itself.
Steve B

Similar Messages

KINAK field in Table KONV not getting updated with value W

Hi,
I have a PO where I am deleting a line item.
After I delet line item the field KINAK in table KONV gets updated with value W.
But I am getting instance where in some cases the field KINAK is not getting updated.
The result is deleted line item is getting populated in PO output also.
Regards
Nandiini

KINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
A     Condition exclusion item
K     Inactive due to calculation basis/shipping material type
L     Condition exclusion header or inactive at header level
M     Inactive due to manual entry
T     Inactive at header level
W     The document item is statistical
X     Inactive via formulae of incorrect
X     Inactive via formulae of incorrect
Y     Inactive because of subsequent price

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.

Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal

KONV not getting updated with new condition type value

Hi,
I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
Thanks
Shweta

Hi Vasu,
It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
Thanks,
Shweta

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

Open PO did not get updated with new price.

A mass price change was updated in SAP for one of the supplier . All open orders did not get updated with this new prices.
Can anyone tell me the reason why ?
-Amol

hi
i think u have to do it manually
logically if u see u can use diffrent prices in diff po
if ur price is inr 100 in 1st po and u done gr ur rice will get updated in mm suppose it is 105
next time u create the po of 110 rs and done gr
suppose ur price updated is 108 rs inmm
so it is not happening that 108 is get updated in ur 1st po
right so i think u have to update pos manually
if i am wrong plz let me know
regards
kunal

Excise table J_1IEXCDTL not getting updated with Excise Base value.

Hi All,
The the field EXBAS of table J_1IEXCDTL is not getting updated for ETT (Transaction Type) DLFC.
For other transaction types, the same is getting populated.
Is there a setting for controlling the same?
If yes, can you please guide me.
Best Regards
Debaditya Ghosh

First you should ensure that it is flowing in your billing document. If so, automatically, it will also flow in your excise invoice and the field EXBAS will be updated accordingly.
From your comments, it seems, the amount is not flowing in your billing document and excise invoice. If so, ensure that you have assigned the correct tax code in FV11 for your ED condition type.
thanks
G. Lakshmipathi

Error in Proxy- Table not getting updated

Hi,
This is an Interface between Oracle and SAP SRM. The Middleware used is
SAP XI.XI is fetching the data based on the SQL condition in the JDBC Adapter. The SAP XI JDBC Adapter picks up the
data with a poll interval of 600 seconds and do the required mapping
transformation in SAP XI and it gives XML to SAP SRM. The
receiver XI Adapter used is XI Adapter since there is a Inbound Proxy
program in the SRM system which when receives the XML from SAP X,
updates table . The data which is getting updated is of Bid
Invitation in SRM. I am able to see xml messages in SXMB_MONI in SRM system. But data is not getting updated in the tables.Any idea why this happening.
Thanks

have you created the sales order through BDC .... or manually ....check first ...
if it is through BDC ...then error in the Program ...
if it is throught Manual check with function People in SD they would have defined in the Customisation upto 130 lines of Line item ...
orelse the patch should be applied ...
if you ask anydoubt in this message ....please mention your sap version which you are working ...
Girish

GLPCA table not getting updated correctly for VBUND

Hi All,
I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
In vendor master this field has different value versus it is showing in GLPCA-VBUND.
Does any one knows about ?
Thanks for your help on it.
Regards,
Manoj

Hi Sridhar,
Thanks for your response on it.
This note is not applicable for our system as we are working on 4.0B with support pack 52.
Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
Please advise your thought.
Thanks,
Manoj

Table not getting updated

Hi
I'm having a problem with updating an item which is not a database item.
I have about 8 fields , Items 1-7 belong to table A and item 8 belongs to table B
I have block level triggers like post-insert, pre-update and pre-delete to take care of the insert, update and delete which are all working fine.
Except when I update Item 8 ONLY , table B does not get updated and I get the message frm-40401 - No Changes To Save
I'm not able to figure out what else is needed. Pls help.
Thanx

There may be a better answer, but try setting the Lock Record property to Yes on the non-base-table item.
If that doesn't work, in the item's when-validate-item trigger, set one of the first seven items values to itself:
:Blk.Itm1 := :Blk.Itm1;
This will cause the record status to be CHANGED, so the record update will take place.

UJE* tables not getting updated

Hello security experts,
We are currently on BI 7.4 version and have BPC 10 (CPM 801 SP 005) implemented, we are facing issues with the creation of New Teams and Member access profiles in the system.
Ideally when a new team/ Task or Member access profile gets created the respective UJE* tables must also get updated.
We created 3 new Teams and Member access profiles in the BPC front end, while checking the backend tables we found that not all UJE* tables are getting updated as expected.
Tables that got updated are :
UJE_MEMACCESS
UJE_TEAM_AGR
UJE_TEAM_MULTAGR
Tables that didnot get updated:
UJE_TEAM
UJE_PROFILE
UJE_PROFILE_ASIN
UJE_PROFILET
UJE_TEAMT
UJE_USER_TEAM ( we assigned users to the team via front end as well)
Ideally these tables must get updated for every new Team; Member access profile created. Am I missing some configuration which should update these tables?
Thanks & Regards
Veena

Hi Veena,
I am also facing the same issue.
Please let me know if you could resolve the issue.
Thanks,
Manohar

Custom field in BP_PDBGP table not getting updated

Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
Neha

Hi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha

BWFI_AEDAT table not getting updated - FI_GL_4 Delta

Hi Friends,
We have just started loading Delta loads using FI_GL_4.
The Changed records are getting updated correctly for all the documents into BWFI_AEDAT and loaded into BW except in cases of an Intercompany doc.
Is there a particular reason that changes to Intercompany Doc will not get updated in the table or is there a way to find out how this table gets populated so that I can debug this issue.
Any help is highly appreciated..
Ashish.

Hi,
How many days after INIT are you going for delta??
If there is entry in BWFI_AEDAT there is no reason why delta should not come.
check for newly created documents in BKPF using CPUDT to see if new documents have been created in this period too.
Regards,
Saurabh

FAGLFLEXT Table not getting updated

Hello All,
I have activated 0L leading ledger and the document splitting is up and active, however while posting a document, the FAGLFLEXT Table is not getting updated.
Can anybody please help.
Regards,
Vikram

Hello Vikram,
Did you assigned any scenarios to ledger.There are six scenarios like profit center update,prep for consolidation and all....so if you assign these scenarios then the FAGLFLEXT will be updated...
pls let us know if you already assigned and then we need to look in to it...
Thanks,
Sai.

AUSP table not getting updated

Classification data of materials is not getting updated in the AUSP table. only few fileds are getting updated. Can you please guide me on this

AUSP table will update whenever you change characteristics option..
Suppose you are using classification for vendor..
Then whenever you will change characteristics value for vendor, the table will update..
Same as material master..
There are no field for material description in table AUSP.
Regards
Dev

EKPO table not getting updated with PR numbers

Similar Messages

Maybe you are looking for