Element link problem in datamodel

Hi,
We created 2 datasets in Datamodel, When we tried to put element level links for both the datasets , its showing error when we generate sample xml.
The error is displayed as shown below:
XML Parsing Error: no element found
Location: http://localhost:9704/xmlpserver/servlet/xdo
Line Number 4, Column 1:
Also in bipublisher.log file, i'm getting this error:
*[2012-03-02T10:54:01.438+05:30] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 38] [userId: <anonymous>] [ecid: 4b1d6eaff3f572e1:6d93021e:135c76b9078:-8000-0000000000015be5,0] [APP: bipublisher#11.1.1] java.sql.SQLException: java.io.IOException: prepare query failed[nQSError: 43113] Message returned from OBIS.[[*
*[nQSError: 27002] Near <=>: Syntax error [nQSError: 26012] .*
the column which 'm trying to link is having same datatype as VARCHAR only.
What should be done for this error? can anyone help in this issue?
Thanks & Regards,
Surya

Thanks for the response Thomas!
The functionality seems to work just fine. I use the LINK PROBLEM and it pops up the problem search box, I search for and select a Problem, I then select it and click ok, and I get no error saying the relationship was not created.
The problem is, when I open the problem after that, there is never any relationship showing in related items there, as it says there should be.
Also, to point out, I am talking about newly created Incidents. I tried even using APPLY prior to doing the LINK PROBLEM but it still did not work. I suspect it may be a workflow problem, where the workflow to create the incident has not completed, there
for the relationship is not completed.... and I get no error.
In my work environment, we have analysts during outages taking a call every 30 seconds, and I need a more efficient way for this system to work. As of now, they spend 1-2 minutes doing the ticket, and that is too long.
I have decided to try a newb way, where I created an Incident (GENERIC OUTAGE) that folks can use, and every 15-30 minutes during an outage, I can open the problem and search for open incidents with that title, and attach all that I find from the problem
side. This is assuming that once attached they will not show up in the search to attach the next time lol. Also this assumes that if attached from the problem, they will auto resolve when the problem is resolved.
I am rusty on my programming, and am currently trying to get refreshed. I am sure that would come in handy for this :)
Oh and lastly, one additional tidbit that will make this clearer, with regard to work flow, we re also running our Service Manager in our help desk, virtualized, as they have not upgraded to Win 7 yet :(. So that compiles my time to add ticket issue :(.

Similar Messages

Element link problem!

Hello Gurus, I need a bit of advice.
In my organization, we have a single element link for basic salary. Now we have a requirement to cost the Basic Salary element as per 2 different assignment category. I tried the following steps
1. Date tracked to 01Sep 2010
2.Tried to create a new element link for Basic salary, but not able to bcoz the elemnt is already linked to all employees thru the existing element link.
MSG : Element link is not mutually exclusive.
3. I tried to delete the existing element link for Basic Salary, but I am not able to. MSG "APP PAY07134 You cannot delete links which have entries within the deletion period."
The recommended action is delete the element entry after the session date.
3. I try to delete the Basic Salary from element entries, but not able to do that, as the delete button does not get enabled for Basic salary.(It is enabled for the other elements).
Pls advise how to proceed.
Thanks
George

There are a lot steps involved with this one.
1. End date salaries for all employees/ contingent workers with basic salary
2. End date old element link
3. Create new element link
4. Upload salary again for all employees.

OTL Error - Hrs - Element link does not exist for the duration of the entry

Hi,
We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
I have re-run the security list generation (we are using static list).
The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
We are using 11.5.10.2
Thankss

Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

Element Link API - Default Location

Hello All,
I have been using PAY_ELEMENT_LINK_API for 2 years to create element links and it was working fine.
Now, when I create element links using this API, the location_id is set to default location of the link organization. I don't quite remember of facing such a problem before.
Did any1 face such a problem? If so, what was the workaround? (Other than manual entry!)
Regards,
Balu

Hi Shobhit,
You can use PAY_ELEMENT_LINK_API.UPDATE_ELEMENT_LINK API for your requirement.
You can refer below link as a reference:
http://tools.appsphor.com/wp-content/uploads/2013/04/PAY_ELEMENT_LINK_API_UPDATE_ELEMENT_LINK.html
Thanks,
Sanjay

Opening Elements 12 problem

I am running Windows 7. When I tried to access Photoshop Elements12 it looked as though it was starting to open, the icon was going round but then nothing. The same happened with Premiere Elements 12where it opened as far as the opening page but again when Organiser was selected the loading 'bar' rotated and then nothing else happened. I tried Adobe support who tried a variety of solutions including loading Application Manager and logging in under a new user name but that failed also. However I did manage to get a couple of error reports as follows:
Premiere Elements Organiser 12
Problem Event Name:                        APPCRASH
Application Name:                             PhotoshopElementsOrganizer.exe
Application Version:                           12.0.0.0
Application Timestamp:                    52251254
Fault Module Name:                          PhotoshopElementsOrganizer.exe
Fault Module Version:                        12.0.0.0
Fault Module Timestamp:                 52251254
Exception Code:                                  c0000005
Exception Offset:                                000956fd
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             2057
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Photoshop Elements 12
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Photoshop Elements 12.0.exe
Application Version:                           12.0.0.0
Application Timestamp:                    52250ae1
Fault Module Name:                          Photoshop Elements 12.0.exe
Fault Module Version:                        12.0.0.0
Fault Module Timestamp:                 52250ae1
Exception Code:                                  c0000005
Exception Offset:                                00053a5b
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             2057
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
If anyone can help I'd be very grateful as it is driving me up the wall!!

Hi kalle-veikka,
If an organizer is not launching then try the steps mentioned in the given link :- https://forums.adobe.com/thread/1475087
If the issue is with editor then share the log file, locate the log path from given link :- http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0CDcQF jAC&url=http%3A%2F%2Fhelpx.ado…
Sarika

Element Link Errror

Problem Description: when create new element link for different eligibility criteria then show for the following error "APP-PAY-06398: the element link is not mutually exclusive"
FYI..., kindly check
First Link: (We have created, no any problem)
Element Name: Difference_Of_Pay
Eligibility criteria-->Salary basis=ABC--> Payroll=Monthly
Second Link: (when create then show following error)
Element Name: Difference_Of_Pay
Eligibility Criteria-->Group= Permanent-->Salary Basis=ABC-->Payroll=Monthly

You cannot create the second element link, because the first one itself qualifies all the employees within that range.
Delete the first one and you will be able to create the second link.
Or create 2 links -
Eligibility Criteria-->Group= Permanent -->Salary Basis=ABC -->Payroll=Monthly
Eligibility Criteria-->Group= Temporary -->Salary Basis=ABC -->Payroll=Monthly
If you create a link -
Eligibility criteria-->Salary basis=ABC--> Payroll=Monthly
then employees in all the Groups will be eligible.
Cheers,
VB

Elements 11 problem

computer notice comes up saying "Display driver has stopped responding but has been recovered............then the editor viewing frame freezes but sound keeps going.............then entire program stops.............once whole software deleted! PAID to have it retrieved!   Now it reloads but i lose the new work. Frustrating..........................has worked ok for 2 years,although i would like to push the contrast/bright/light effects further..............
if anyone knows reasonably priced better edit software i would be interested! any thoughts?
thanks.

thanks v much ............saw computer guy today and he sent me in the device manager direction but without all the detail u mention............I may forward your email to him..............
also there was a note from Dell to do a system check up which I did but then it said overall result-not supported/system tests not successfully completed...........says to shut down and try again but now I can't see where to activate test!(icon is gone)
also found an Adobe/elements 11 update device and that is currently being processed............
seems like we may be heading in a good direction...............
will have a closer read of your email.............
again.thanks...............
WEBSITE         www.kimmilesfilms.com      AND    www.innersense.com.au/mif/miles.html
AND THE BLOG      http//www.kimmilesfilms.blogspot.com/
Date: Mon, 3 Mar 2014 08:02:52 -0800
From: [email protected]
To: [email protected]
Subject: Re: elements 11 problem elements 11 problem
    Re: elements 11 problem
    created by A.T. Romano in Premiere Elements - View the full discussion
fixmyproblem
Thanks for the reply and the information that your Premiere Elements 11 is running on Windows 8 (presumed 64 bit) computer.
Because you come with a display issue, the first line of troubleshooting is targeted at the video card/graphics card that the computer uses.
This information can be found in the computer under the Device Manager/Display Adapters. And then you tell us what is listed under Display Adapters...you may find one or two names listed. Please report what you find.
In Windows 8, one way to Display Adapters listing
a. From the Metro App Screen, type Control Panel in the Search that appears to the right of the screen, and then click on Control Panel in list below.
b. In Control Panel, click on the header "Hardware and Sound"
c. Under Device and Printers, click on the Device Manager choice
d. In the Device Manager, open the Display Adapters category to find your video card/graphics card information.
There may be a keyboard shortcut to Control Panel (I know it is there in 8.1 64 bit)...Windows Key + X and selecting Control Panel from pop up at right of the screen. You can be in the Desktop App or in the Metro Screen when you do the Windows Key + X.
Once we know that, we will ask you to go to the web site of the manufacturer of the card and determine if you have the latest version of the card's driver installed.
If all this is going to be too much for you to handle, then it might be a good idea to consult with the people who installed your Premiere Elements 11 for you.
We will try to walk you through whatever we can.
Please let us know how you wish to proceed.
Thank you.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6174213#6174213
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: elements 11 problem
To unsubscribe from this thread, please visit the message page at Re: elements 11 problem. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Open project in premiere elements trial problem.

Unload the trial of photoshop and premiere elementens, the photoshop works correctly, but the premiere .. only the organizer works, when I try to open project or new project the program is closed automatic .....(window xp).gracias! (the proyect save correctly, buy not open after)

Thank you very much Bill, these is the information of the card, I believe that probably this one expired, your diras ... thank you again!
NVIDEA GeForce 8600 GP
Fabricante:.........................NVIDEA
Tipo de dispositivo:............Adaptadores de pantalla
Ubicacion:.........................Ranura PCI 16 (Bus PCI 1, dispositivo 0, función 0)
Version:...........................1.0.0.35
Proovedor del controlador:NVIDEA
Fecha del controlador:27-08-2007
Version del controlador:6.14.11.6230
Firmante digital:Microsoft Windows Hardware Compatibility Publ
Date: Thu, 9 Aug 2012 14:06:33 -0600
From: [email protected]
To: [email protected]
Subject: Open project in premiere elements trial problem.
    Re: Open project in premiere elements trial problem.
    created by Bill Hunt in Premiere Elements - View the full discussion
Can you tell us all about your computer, and especially your computer's graphics card/chip? What is its make/model? What is the version and date of the installed video driver? When PSE runs, but PrE does not, it is usually an issue with the video driver being obsolete. Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4610620#4610620
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4610620#4610620. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Getting error when trying to end date the element links

When i am trying to end date the element link and i am getting a error message as ORA-01403: no data found if i click on the details button the following message is displayed:
ORA-01403: no data found
FRM-40735: ON-DELETE trigger raised unhandled exception ORA-01403.
If i click on Ok button it bringgs another popup message that reads as follows:
An Unexpected Error- 1403 has occured.An alert has been sent to the system administrator.
ORA-01403: no data found
I am really not getting why my link is not end dating.
Could anyone advice me on how i can end date my element links.
NB:the date track i am using is 01-DEC-2009 and no prayroll or quick pay has been processed as of this date

Pl see if enabling an Forms Runtime Diagnostics (FRD) trace can help identify the cause
MOS Doc 373548.1 - How To Collect And Use Forms Trace (FRD) in Oracle Applications Release 12
MOS Doc 167635.1 - How To Perform Forms Runtime Diagnostics (FRD) Tracing in Applications 11i
HTH
Srini

WebI report on SAP Mobile BI for iOS that contains a chart with element linking issue

Hi gurus. I have the following issue:
I have element linking based filters on my chart # 1 to filter values on chart # 2. It worked fine on Ipad. And it worked fine on BI Launch Pad.
But after some time I check my webi report and it stopped working on IPAD.
Filters are not shown on the graph.
However it still works fine on BI LaunchPad
Have you faced this issue before?
Using: BI mobile 5.1.12
Before, example:
After some time, I opened sap mobile and it is not showing up the filter anymore
Now: We upgraded to SAP Bi Mobile 6.0.8.12 but issue persists.
Could you do the test?
Steps to reproduce:
Create a simple Webi report with a table.
Copy that table and paste it to the report.
Turn the original table into a column chart
Add element linking from the chart to table. (When user filters on the chart it should change the table as well)
Test that the element link works in BI LaunchPad.
Save the report to the Mobile category and test on iPad.
Open report on iPad
Tap chart bars. Yellow filters, that are supposed to show up, are not displayed.

Hi Erika,
Is this report element linking defined as 'All Objects' or 'Single Object' in Webi.
I ask this that report element linking on 'All Objects' is not supported yet. This support is expected to come in later releases.
However, if this is single object then it should be working. Can you verify this on latest app store build and confirm. If still it does not work for you, then please raise a support ticket for the same.
Regards,
Ashutosh

"Link Problem" in Incident Form does not seem to work right? How do I do it correctly?

1. The Link Problem tool in the task pane on our Incidents, do not seem to actually link the Incident to the Problem.
2. I can link the two by going to the Problem and adding it on the related items tab, but this is very time consuming in a call center environment, especially during an outage where we are relying a lot more on Problem and root cause analysis.
3. I have tried creating the incident and applying, then doing the Link Problem tool and selecting the problem, then applying again and selecting OK to close the incident. Again it doesn't work for me.
What am I doing wrong, number one?
Can we do this without manually opening the problem for every incident and attaching from there?
3. Can I build an incident template that will automate the Attachment to the problem at creation? (Tried this today to and it wouldn't work, but then again, the Link Problem might again be the culprit) This would be great for real time saving during
an outage. Once outage is found, I could create the template with all the necessary items filled out, and would like to have it automatically attach to the specific problem I choose at template creation, and that way analysts can simply apply template, and
click OK when they get a call related to the outage.

Thanks for the response Thomas!
The functionality seems to work just fine. I use the LINK PROBLEM and it pops up the problem search box, I search for and select a Problem, I then select it and click ok, and I get no error saying the relationship was not created.
The problem is, when I open the problem after that, there is never any relationship showing in related items there, as it says there should be.
Also, to point out, I am talking about newly created Incidents. I tried even using APPLY prior to doing the LINK PROBLEM but it still did not work. I suspect it may be a workflow problem, where the workflow to create the incident has not completed, there
for the relationship is not completed.... and I get no error.
In my work environment, we have analysts during outages taking a call every 30 seconds, and I need a more efficient way for this system to work. As of now, they spend 1-2 minutes doing the ticket, and that is too long.
I have decided to try a newb way, where I created an Incident (GENERIC OUTAGE) that folks can use, and every 15-30 minutes during an outage, I can open the problem and search for open incidents with that title, and attach all that I find from the problem
side. This is assuming that once attached they will not show up in the search to attach the next time lol. Also this assumes that if attached from the problem, they will auto resolve when the problem is resolved.
I am rusty on my programming, and am currently trying to get refreshed. I am sure that would come in handy for this :)
Oh and lastly, one additional tidbit that will make this clearer, with regard to work flow, we re also running our Service Manager in our help desk, virtualized, as they have not upgraded to Win 7 yet :(. So that compiles my time to add ticket issue :(.

InDesign to Adobe Acrobat to Adobe Reader Link problem

Hi - I'm responsible for a long conversation about link problems in creating file links in InDesign that did not work in Acrobat. At the end of that long discussion, I thought I solved the problem, but didn't. Since then, I've been MUCH more observant.
The problem appears to take place in Adobe Reader.
My home computer on Win7 is different than my work Computer (XP), but I have the same software on both.
At work, I discovered that when I clicked on a PDF, it worked fine, that its links opened a new PDF window, but when I clicked on links on the second document, the links failed and Microsoft returned an error message telling me that I was screwed. Because I was screwed, I couldn't see what was in the path of that error.
It turns out that for some unknown reason (which you might clarify for me), my Adobe Readers are attempting to open my documents in Internet Explorer and that just won't work.
What I observed at home is that I made 5 test documents in ID, and ported them to Acrobat. As it turns out, my default for opening PDFs is Adobe Reader, which I saw on the chrome of the first document I opened. When I clicked a link, and I got the error message, I noticed my browser was up.
When I set my default for opening in Acrobat, everything worked like a charm! How about that!
Now then, what that says to me is that Adobe Reader is to be used exclusively with a browser, so if the people who are going to read your internal PDF files with Reader without those files being on a web server of some type, you are totally screwed. The only way you can use Reader is if you click on the file and bring it up directly. Don't rely on linking to other documents.
I mean, that is what it seems to me.
Now, I am creating a big project for an environment without a webserver and obviously my sense of panic is palpable. That said, I believe that all my users can read my files using Acrobat (to be tested tomorrow), which I hope means I can breathe a bit easier.
Do any of you have any thoughts on this subject? If you are really curious, I can make a packet of test files available.

Karen_Little wrote:
The files and the PDFs are all in the same directory.
The tests are on local drives. All indesign files and their related PDFs were in the same directory.
The same for Word and its related PDFs. Note that the PDFs created by Word then read by Adobe Reader worked correctly. They all opened in Adobe Reader.
If the default program for opening PDFs is Acrobat, everything works correctly, with the added benefit of everything opening in a different window, which is what I want (yet to be tested at work). If the default program is Adobe Reader, the second generation of links do NOT work because Reader opens in Internet Explorer.
When I open a Word-created PDF with Acrobat, view the link, and click to the Actions menu, the action is "Open a file"
When I open an InDesign PDF with Acrobat and do the same, the action says "Open a web link"
Big BIG BIG bug.
Are you seeing the link commands by editing them in Acrobat? If not, try, so you can see the exact command and file or URL instruction. It still may be a bug, but you'll have better evidence when you report it here:
Adobe - Feature Request/Bug Report Form
And, you might want to try correcting a link command in Acrobat, to see if can work for both Acrobat and Reader.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Re: Fwd: Link Problems With Borland C++ 4.52

I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092

James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------

Oracle 9.2.0.1.0 installation link problems.....HELP !!!!!!

Hi All
During installation of Oracle 9.2.0.1.0 on Linux, I received the following error:
Error:
Error in invoking target install of makefile
/opt/oracle/product/9.2.0.1.0/network/lib/ins_oemagent.mk
I did some research and found that it is executing the "relink" script. So I tried to debug it it. Here is the output:
[oracle@redash oracle]$ cd /opt/oracle/product/9.2.0.1.0/bin/
[oracle@redash bin]$ relink oemagent
chmod 755 /opt/oracle/product/9.2.0.1.0/bin
if [ linux = aix ]; then \
gcc -L/opt/oracle/product/9.2.0.1.0/lib/ -L/opt/oracle/product/9.2.0.1.0/rdbms/lib -L/opt/oracle/product/9.2.0.1.0/network/lib -L/opt/oracle/product/9.2.0.1.0/lib/ -L/opt/oracle/product/9.2.0.1.0/rdbms/lib -L/opt/oracle/product/9.2.0.1.0/network/lib -o dbsnmp /opt/oracle/product/9.2.0.1.0/network/lib/s0nmi.o -lvppdc /opt/oracle/product/9.2.0.1.0/network/lib/libvps.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmi.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmd.a /opt/oracle/product/9.2.0.1.0/network/lib/libnms.a /opt/oracle/product/9.2.0.1.0/network/lib/libnmt.a /opt/oracle/product/9.2.0.1.0/network/lib/libnml.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmi.a /opt/oracle/product/9.2.0.1.0/net[i]Long postings are being truncated to ~1 kB at this time.

Before installing Oracle 9.2 on linux (i'm using redhat 7.2), there are some steps you have to issue.
Those link problems are related to the wrong version of binutils, you need binutils-2.10.0.18-1.i386.rpm
You need also JDK,to set some kernel parameters and so on..
However follow the steps of this link http://www.puschitz.com/OracleOnLinux.shtml
For me it worked.
Hope this helps
Tarek

Pro*C linker problems

System is Linux Mandrake 6.0 with Oracle 8i, with the 8i patch
applied.
What a nightmare that install was! Lots of permission problems,
unreadable directories, programs with no execute permission on
them and so on.
I now have a database up and running, and am trying to get Pro*C
working. The code was written on RedHat 5.2 with Oracle 8.0.5,
and worked fine there, so I know it is not a fundamental code
problem!
I have patched the pcscfg.cfg file as detailed in the patch FAQ
(with modifications for the slightly different paths under
Mandrake Linux).
When I compile the Pro*c file, I get many "undefined reference
to 'dbcon'" and "undefined reference to 'ctx'" errors from the
linker. This occurs whether I use a pre-defined list of specific
libraries in my own Makefile, or if I use the standard
demo_proc.mk makefile. I have used nm(1) on every place I can
think of, to try to find the required library/object, but to no
avail.
I appreciate that Oracle have so far only certified Oracle for
Linux against Redhat 6.0, but surely Mandrake can't be THAT
different ;-)
Does anybody have any ideas, known problems etc? I REALLY HOPE
that I don't have to switch to Redhat as the only solution - no
problem with Redhat, it would just require a tedious and
complicated system rebuild, which I don't have the time to do :-(
TIA
Mike Holden
null

Robert B gin (self) (guest) wrote:
: Robert B gin (guest) wrote:
: : Since I've last posted, I've installed RedHat 5.2 and
ditched
: : Slackware!
: : (btw, what a breeze - Hat's off to RH! very nice install!).
: : I've then installed oracle, have managed to setup
tnsnames.ora
: : so I can connect via sqlplus to my remote database (on
: VAX/VMS).
: : But now I have Pro*C linker problems with:
: : make -f demo_proc.mk build OBJS=test.o exe=test
: : (blah,blah,blah)
: : /usr/lib/crt1.o(.text+0x36): undefined reference to `main'
: : make: *** [build] Error 1
: : Does anybody out there have a similar problem?
: : Rob
: Duh! forget it... (EXE has to be caps... RTFM)
: (cryptic error message though?)
: works great!!!
Could you please tell me where I can get demo_proc.mk file
for Linux (RedHat)?
Thanks
null

Element link problem in datamodel

Similar Messages

Maybe you are looking for