Elements 10 not showing a scanned image until the twain driver is closed.
When I open up Elements 10 and scan into the Elements 10 Organizer from the Epson Scan Twain driver (V3.04a) the image will not transfer in unless I close Epson Scan. At that time the transfer is completed and I can see the scanned photo in the Organizer screen. I have this problem on both Windows 7 32 bit and 64 bit computers. I have reloaded the Epson Scan Setup twice (loads Epson twain driver). If I don't close the Epson twain screen the image won't display in Organizer at all. Any thoughts as to why this problem requires closing Epson Scan to view the image?
I think you're running into a problem with the way Adobe has implemented scanning in the Organizer. In your specific case, PSE is obviously not handling the return codes from the scanner correctly. If Organizer was able to use WIA (as the Editor does) you'd have another option for scanning.
See this discussion/argument that I'm having with an Adobe representative:
http://feedback.photoshop.com/photoshop_family/topics/pse_organizer_need_option_to_use_wia _and_disable_twain
The Adobe rep is insisting that Organizer doesn't use TWAIN, but I'm not buying it.
Ken
Similar Messages
-
Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.
Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…
-
Brother DCP8080DN scanner does not show up in Image Capture's list of devic
Hi, I've been printing successfully to a Brother DCP-8080DN for a while now. I have the latest CUPS driver and recently installed the latest Twain driver from Brother. I can scan from the Brother Control Center utility but the printer scanner does not show up in Image Capture nor does it appear in the Print&Fax Print Queue (it's supposed to show up on the right side). Any idea how to get 10.6.6 to recognize the scanner? Rebooting didn't help.
I found the legacy twain_32.8ba however when I try to find the "into" location, and I typed it very carefully..there is no path to this location.
I can't understand why Adobe would do this to me. Do they expect me to go out and buy another scanner? I've written to Microtek. All previous versions of Elements I've had import from this scanner and I've installed the latest scanner software. It's horrible that I have to throw away the money I spent on this so-called upgrade and go back to a previous version. Who thinks up this stuff?
I hope other potential purchasers of 9 understand what they're getting into. I would also like to get rid of the bothersome "ID interface" at the beginning..I would like to get to Photoshop edit is quickly as possible but Adobe is putting me through some sort of merchandising of their "free" web space. I don't want it. I'm spending way to much time on this. - Larry -
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
barba87623950 a écrit:
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
Photos from cameras or scans have only one layer (the 'background' layer).
You can start with that 'background' layer and duplicate it or add other layers in the editing process. For instance you can make a selection of a subject and put it on another layer; a common use is to desaturate the 'background' and to keep the color in the selected subject in your newly created layer. -
How to show a background image in the Forms 6i MDI window?
Hello,
We are using Oracle Forms 6i Release 2 Patch 18 on Windows XP in client/server environment (not web server).
Is there any way to show a background image in the MDI root window without using DLL injection to subclass the MDI root window procedure.
KurtPlease try this
Public Function Decompress(ByVal arr As Byte()) As Byte()
Dim s As Byte()
Dim notCompressed As Boolean
notCompressed = False
Dim MS As System.IO.MemoryStream
MS = New System.IO.MemoryStream()
MS.Write(arr, 0, arr.Length)
MS.Position = 0
Dim stream As System.IO.Compression.GZipStream
stream = New System.IO.Compression.GZipStream(MS, System.IO.Compression.CompressionMode.Decompress)
Dim temp As System.IO.MemoryStream
temp = New System.IO.MemoryStream()
Dim buffer As Byte() = New Byte(4096) {}
While (True)
Try
Dim read As Integer
read = stream.Read(buffer, 0, buffer.Length)
If (read <= 0) Then
Exit While
Else
temp.Write(buffer, 0, buffer.Length)
End If
Catch ex As Exception
notCompressed = True
Exit While
End Try
End While
If (notCompressed = True) Then
stream.Close()
Return temp.ToArray()
Else
Return temp.ToArray()
End If
End Function
Thanks & Regards Manoj -
Download videos from Iphone to Mac - Iphone not showing up in image capture
Hello I am trying to download the videos I took with my iphone onto my computer, but the iphone is not showing up in image capture or iphoto. Does anyone know how to get the videos off without degrading the video quality.
ThanksPhotos captured by your iPhone shouldn't be a problem.
Photos saved from a received email, from a website, or from a received MMS has caused this problem for some, and I'm not sure why. I haven't experienced the same yet. This may include screenshots.
Email the screenshots only to yourself followed by deleting the screenshots from your iPhone's Camera Roll, and the same for any photos saved from a received email, from a website, or from a received
MMS.
Test if this resolves the problem for importing the photos and video that were captured by your iPhone. -
PE12 just installed, but Organizer share preference for emailing photos does not show any email preferences except the default Adobe. Have Visa with Windows Mail. Previous PE worked OK. How to resolve?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
New tip trick for capturing scanned images to the PB from your wireless network printer
I've read a couple of threads here and on crackberry about not being able to print directly to a printer on the local network (although there is a way to print via the cloud from gmail apparently). Anyway it occurred to me that I can browse to my printer's IP address and in addition to allowing me to configure it, it also lets me scan documents to jpg, pdf, and tiff formats and then renders the scanned image through the browser. I tried this from the Playbook browser and it worked perfectly. i was able to view and save the scanned document directly to my Playbook file system. Even more conveniently I could just take a screenshot of the browser window. Now if only the printer would let me print the scan or better yet browse to and upload a local file for print my printing problems would be solved. I am using an older HP 2500 psc. Does anyone know of a newer model wireless/network printer that allows printing via the browser interface?
Just to clarify. When your playbook and the wireless printer are on the same network, you can browse to the IP address of the wireless printer from your playbook just as you could from your PC or laptop. The browser will display the printer's web features which in my case includes the ability to scan the document that is laying on the scanner bed of the printer. When I click the scan button, the image of the scanned document renders on my playbook and I am able to save the rendered TIFF, JPG, PDF to the playbook locally or I can even just take a screenshot (press the playbook's volume up and down buttons simultaneously) and then the image of the document from the browser window automatically saves to the camera folder under pictures.
What I would like is to find a wireless printer that from the web page that is displayed when I browse to the printers local IP address be able to browse to a file on my playbook and upload it to the printer (kind of like uploading or attaching a document to a gmail email message or uploading a local picture to Facebook etc...) and then instruct the printer to print the document. Obviously this would only work when I was on the same local wireless network as the printer but it would essentially solve the "how to print directly to a wireless printer from the playbook?" question. -
Some Devices are not showing up at all in the Discovery reports
Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help. -
Ios 7 calendar does not show events 2 years in the future
Why does ios 7 calendar does not show events 2 years in the future?
I've entered the events more than twice and it all shows up in the OSX calendar but not on my iphone.Just tested it works even 3 years ahead.
Tap Calendars (bottom, middle) is All iCloud selected (tick mark)? -
Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?
what format your iomega HD is it NTFS , if NTFS try download http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html
-
I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of July 2013, which I did not. She said that in the system my husband took an upgrade July 29th 2013. He didn't even have a Verizon phone, he had a work phone with T-mobile. I have asked what device he supposedly upgraded to since no phones have been activated and we all still have our same phones and numbers. Remember at the time, said husband had a work phone with T-mobile. I still have the very same phone as do all of the rest of my family members. No one has upgraded. I spoke with "customer service" for more than a half an hour today, Char promised me that her supervisor (Emily) would call me back by 7:30 tonight to clear up this problem. Well guess what? No call back so where should I go from here? Any advice or help would be greatly appreciated. Thank you for your help.
someone swapped upgrades. Phone could have been sold For quick cash.
-
I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.
I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps -
how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help
This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card. -
MY LAYER STYLES AND PHOTO EFFECTS ARE NOT SHOWING UP WHE I CLICK THE BOX, NO DROP SHADOW, ETC
MY LAYER STYLES AND PHOTO EFFECTS ARE NOT SHOWING UP WHE I CLICK THE BOX, NO DROP SHADOW, ETC,
I ALSO GET AN ERROR WHEN I OPEN THE EDITOR ONTITLECREATEWITHPARONS COULD NOT BE LOCATED IN THE DYNAMIC LINK ONCORE2DLLSeems like the database has been accidently deleted. Browse here on how to get it back http://forums.adobe.com/thread/759100
Maybe you are looking for
-
Contacts on client machine suffer from disk I/O errors
Contacts are running slow if not at all on my client machines. I check the logs and it is having trouble with accessing the files and or writing the files. all other programs seem to work fine. Mail hangs but I think it is because of the contacts
-
I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit differen
-
Is there a way to select multiple audio tracks and make all of them stereo pair at the same time?
I selected multiple tracks, pressed "option L" but was not able to make multiple clips stereo pair at the same time.
-
Want to create a multiple Purchase Order using one file source
I'm want to create a multiple purchase order using one source file. I want to read the file source create LINES in a purchase order and when the Vendor code changes I want to Add the purchase order and then create a new purchase order and Add LINES a
-
imported ical from outlook and the date across the top of the weekly view all show the date i imported..