EM console -configuration

Pinela wrote:
Hello Guys,
I have this scenario:
- Oracle 11.2.0.3
- RHEL 4.6 64 bits
- Active Data Guard
- Broker configured
- DBconsole configured on primary server
Now, I have server PRIM with the primary database, and server STB with the standby server. For now, the dbconsole is configured in the PRIM server.
When I do a switchover (to the standby on STB), EM is not configured, so I use RepManager.sh to clean the sysman user, and I use emca to recreate the dbconsole. After this, everything works.
Once I switch back, the EM is no longer configured on PRIM, so I repeat the previous steps (repManager and emca).
Everything is ok after this. I can access the EM on the primary normaly, and this gets information from the broker to provide basic information on the STB (like db status, apply, and so forth).
my question is this:
- do I have to do all these steps in case of a switchover? is there an easier way?
- would grid control solve this situation?
thanks guys,
br,
jpinela.Its a Good question. While configuring EM it gathers all the information such as hostname, instance name, port number , listener and so many..
Of course configuration is not same on primary and standby, then EM configuration file properties mismatch with services after the switchover specifically if you are monitoring redo transport , apply and status so on....
AFAIK, you must reconfigure again whenever there is frequent changes. BTW, reconfiguring EM which takes minutes of time.

Similar Messages

Db console configure !!!!

Hi
Edited by: LazyDBA10g on Mar 9, 2009 2:54 AM

Why are You posting duplicate threads?
db console configure !!!!
Here is the same question from You and 2 answers already provided. Some issues or more errors appeared during configuration?

Problem with Design Console configuration - please help

Dear All,
I am trying to configure design console. It is installed on Windows XP and should point to remote server. I am getting the following error on OIM Server and Port screen:
INST-07057: Error in validating the Hostname field value. Entered host is not up and running
Make sure that the host is up and running
But host is up and running. I can ping it successfully and oim admin interface is working. I suspect this is permission issue.
If you can help me to resolve this I would appreciate it very much.
Kind regards
Maria

It seems xlclient.cmd got modified. Check if your xlclient.cmd looks like this:
@echo off
setlocal
call classpath
REM SET DEBUG_OPTS=-classic -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5001 -DXL.RedirectSysOutErrToFile=TRUE -DXL.SysOutErrLogFile=.\logs\Client.System.Out.Err.log
REM Make sure to remove java.naming.provider.url and read it from the configuration
REM once the JNDI Profiles are implemented.
REM make sure you are using j2sdk1.4.2_05
"<your java home>" %DEBUG_OPTS% ^
     -DXL.ExtendedErrorOptions=TRUE -DXL.HomeDir=C:\Oracle\Middleware\Oracle_IDM1\designconsole ^
     -Djava.security.policy=config\xl.policy ^
     -Dlog4j.configuration=config\log.properties ^
     -Djava.security.manager -Djava.security.auth.login.config=config\authwl.conf ^
     com.thortech.xl.client.base.tcAppWindow -server server
endlocal

Remote Access Management Console - configuration issue with Network Location Server

2012 Std R2
The remote Access management console operation status shows all green except for network location server .
Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
Resolution listed as:
1. Configure the network location server on a server that is highly available to clients on the internal network.
2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
The remote access server is located on this server. IIS is running. What URL: show I be looking at?
Any other thoughts so I can get remote access working.
l also am getting a remote access error for IPV6, could this be a cause:
RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
John Lenz

Hi John,
please follow the steps to reinstall TCP/IP stack.
1.Restart your PC into Safe Mode with Networking.
2.
Edit your registry. Delete the following keys:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
3.
Open the nettcpip.inf file in your %winroot%/inf folder
(%winroot% is usually c:/windows).
Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
4.
Now you would notice that you can uninstall TCP/IP!
Do that, then restart the PC.
Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
5.
This along with a TCP/IP reset using the netsh command:
netsh int ip reset resetlog.txt
wish you have a nice thanksgiving too
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Console & Configuration for the WISM

we are in the process of upgrading the wireless network in the office to use the Unified solution. We have converted the WLSE to the WCS and now in the process of configuring the WISM cards. 1st off we are having an issue with the console connection to the wism card. we are using the rollover cable connected to a termserver and are unable to get in. 2nd trying to configure the wism card is becoming a hassle. we set up the service port so far and the managment vlan and we still see service port down. Looking for some help in configuration. Please advise.

actually it turned out to be a faulty wism card but i do have a question regarding configuration. i am have 2 wism cards installed in 2 different chassis since the service vlan is local can it be configured the same on both chassis?

Console configuration LWAPP AP 1240

Hello
How can I manually alter the IP settings of LWAPP Aironet 1240AG on the console?
Regards
Pascal

Hi Pascal,
Maybe this info will help;
Manually Configuring Controller Information Using the Access Point CLI
In a new installation, when your access point is unable to reach a DHCP server, you can manually configure needed controller information using the access point CLI.
Note The CLI commands in this section can be used only on an access point that is not associated to a controller.
The static information configured with the CLI commands are used by the access point to connect with a controller. After connecting with the controller, the controller reconfigures the access point with new controller settings, but the static IP addresses for the access point and the default gateway are not changed.
Configuring Controller Information
To manually configure controller information on a new (out-of -the-box) access point using the access point CLI interface, you can use these EXEC mode CLI commands:
AP# lwapp ap ip address
AP# lwapp ip default-gateway IP-address
AP# lwapp controller ip address IP-address
AP# lwapp ap hostname name
Where name is the access point name on the controller.
Note The default (out-of-box) Enable password is Cisco.
Clearing Manually Entered Controller Information
When you move your access point to a different location in your network, you must clear the manually entered controller information to allow your access point to associate with a different controller.
Note This command requires the controller configured Enable password to enter the CLI EXEC mode.
To clear or remove the manually entered controller information, you can use these EXEC mode CLI commands:
clear lwapp ap ip address
clear lwapp ip default-gateway
clear lwapp controller ip address
clear lwapp ap hostname
Manually Resetting the Access Point to Defaults
You can manually reset your access point to default settings using this EXEC mode CLI command:
Note This command requires the controller configured Enable password to enter the CLI EXEC mode.
clear lwapp private-config
From this good LWAPP 1240 doc;
http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b730.html#wp1082991
Hope this helps!
Rob
Please remember to rate helpful posts.....

Reg:: OEM Grid console configuration/implementation

Folks,
This is regarding implementation of OEM grid control on R12 EBS and 11g R2 database .
pls advice that how to proceed . what is AMP and how it is related to OEM and what is the necessary for R12 EBS
Thanks

Hi;
Please see our previous same topic which is answered by Hussein Sawwan posts
Follows below thread please
Configure OEM in EBS R12
Re: OEM & EBS
Regard
Helios

EM (DB console) configuration after switchover

Hello Guys,
I have this scenario:
- Oracle 11.2.0.3
- RHEL 4.6 64 bits
- Active Data Guard
- Broker configured
- DBconsole configured on primary server
Now, I have server PRIM with the primary database, and server STB with the standby server. For now, the dbconsole is configured in the PRIM server.
When I do a switchover (to the standby on STB), EM is not configured, so I use RepManager.sh to clean the sysman user, and I use emca to recreate the dbconsole. After this, everything works.
Once I switch back, the EM is no longer configured on PRIM, so I repeat the previous steps (repManager and emca).
Everything is ok after this. I can access the EM on the primary normaly, and this gets information from the broker to provide basic information on the STB (like db status, apply, and so forth).
my question is this:
- do I have to do all these steps in case of a switchover? is there an easier way?
- would grid control solve this situation?
thanks guys,
br,
jpinela.

Pinela wrote:
Hello Guys,
I have this scenario:
- Oracle 11.2.0.3
- RHEL 4.6 64 bits
- Active Data Guard
- Broker configured
- DBconsole configured on primary server
Now, I have server PRIM with the primary database, and server STB with the standby server. For now, the dbconsole is configured in the PRIM server.
When I do a switchover (to the standby on STB), EM is not configured, so I use RepManager.sh to clean the sysman user, and I use emca to recreate the dbconsole. After this, everything works.
Once I switch back, the EM is no longer configured on PRIM, so I repeat the previous steps (repManager and emca).
Everything is ok after this. I can access the EM on the primary normaly, and this gets information from the broker to provide basic information on the STB (like db status, apply, and so forth).
my question is this:
- do I have to do all these steps in case of a switchover? is there an easier way?
- would grid control solve this situation?
thanks guys,
br,
jpinela.Its a Good question. While configuring EM it gathers all the information such as hostname, instance name, port number , listener and so many..
Of course configuration is not same on primary and standby, then EM configuration file properties mismatch with services after the switchover specifically if you are monitoring redo transport , apply and status so on....
AFAIK, you must reconfigure again whenever there is frequent changes. BTW, reconfiguring EM which takes minutes of time.

EMCA config dbconsole creates DB Console configuration using localhost.

Configured a repository and dbcontrol using emca (emca -config dbcontrol db -repos create).
However, it uses the Local hostname as localhost, instead of using the actual hostname of the server.
Server box OS: Linux.
Portion of /etc/hosts (topmost portion)
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain loghost
10.184.133.162 localhost.in.oracle.com localhost
10.184.133.162 ofss220210.in.oracle.com ofss220210
How to change this URL to reflect the actual name of the host in the URL instead of using the localhost?

Found answer on my own: You can export variable ORACLE_HOSTNAME to the server name or the name which is accessible from any machine.

Configuring Web Logic for ODI console problem

Hi guys ,
I following the instruction from here
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/setup_jee_agent/setup_jee_agent.htm
After installing the Weblogic 12.1.1.0 , I came to the configure wizard which run from
C:\oracle\product\11.1.1\Oracle_ODI_1\common\bin\config.cmd
then the wizard screen appears
but the component of my installation only has
Basic Weblogic Server Domain - 12.1.1.0
Basic Weblogic SIP Server Domain - 12.1.1.0
WebLogic Advanced Web Services for JAX-RPC Extension - 12.1.1.0
WebLogic Advanced Web Services for JAX-WS Extension - 12.1.1.0
In the document has much more option
such as
oracle enterprise manager plugin for ODI
oracle enterprise manager
oracle data integrator - SDK Web Services
Oraclce Data Integrator - Console
Am I missing something at the installation .
because i already checked all the component for Web Logic and ODI
Thanks in advance.

Hi
Hopw below URL will helps you on ODI console configuration using Weblogic 11g
URL: http://odiexperts.com/tag/odi-11g-console
Regards,
Phanikanth

Clarifications on OIM Design Console 11.1.1.5 Installation

I have the OIM Server 11.1.1.5 installed and configured on OL (Oracle Linux) 5.7 64bit. The Next step is to install and confiure the OIM Design Console.
I have read the 11.1.1.5 doc. The OIM Console runs on Windows only. But I have noticed that some posts claimed the 11g console can run on the both of Windows and Linux.
OIM Design Console
Is that true? If yes, please point the doc for the installation and configuration on the Linux.
If not, what are the minimum requirements to run OIM Console 11.1.1.5 on the Windows?
I looked over the 11.1.1.5 doc http://docs.oracle.com/cd/E21764_01/install.1111/e12002/oidonly.htm#CDDIDCIC
I have:
WLS not a mandatory;
SOA not a mandatoty;
IAM 11.1.1.5 a mandatory;
The 11.1.1.5 doc states that OIM manager has to be configured prior to configuring of OIM Console. I read this as the RCU schemas relevant. Do I have to install a new RCU schema DB in the local Windows just for the OIM Console configuration? Or I can use the SAME RCU Schema DB for the OIM Server on the OL.
Thanks a lot for the help.

If you have already installed OIM 11.1.1.5 on linux machine just do below to configure design console
1. goto IDM_HOME/bin/ run config.sh
2. In the configuration wizard, select ‘Design Console’ checkbox ONLY.
3. next screen, enter the OIM server host and port name
4 generate wlfullclient.jar and Copy the ‘$WL_HOME/server/lib/wlfullclient.jar’ to ‘IDM_HOME/designconsole/ext’ (find below instruction given for generation of wlfullclient.jar)
5. now goto IDM_HOME/designconsole-> run xlclient.sh and you will have design console in unix
If you want your design console in windows do below
1.copy entire folder "designconsole" from linux to Windows machine
2. Now, in your local windows machine, edit the file ‘$DC_HOME/designconsole/xlclient.cmd’ ($DC_HOME is the folder where you copied the ‘designconsole’ folder) to change the following values:
* "@loc\java\bin\java" - '@loc' points to your JDK installation
* "-DXL.HomeDir=@loc" - '@loc' will be $DC_HOME/designconsole
* "config\@auth_config" - '@auth_config' will be authwl.conf
creation of wlfullclient.jar
- Change directories to the server/lib directory.
cd WL_HOME/server/lib
- Use the following command to create wlfullclient.jar in the server/lib directory:
java -jar wljarbuilder.jar
--nayan

Sound Blaster Extreme Music do not detect changes on the console

I'm using the sound blaster X-Fi XtremeMusic with Logitech Z-5500 and the Flexi Jack, connected on Digital mode (Using Coaxial and Optical). The OS? Is Windows Vista Ultimate 32 Bits.
The problem at this moment is that I can not make any change on the console configuration, I mean, if I change the speaker connection or change any parameter of the configuration has no reaction,I even change the EAX effects, the CMSS-3D ad nothing happen, all that I can control with the console launcher is the volume.
I reinstall the drivers and download from the website the latest drivers I found and same problem.
?Any help?
THANKS?

Choose Soundblaster in the dropdown box and you will see XFi listed , you will find the latest drivers there....Seems rather strange to me since this is a XFi card, but hey I did not design the Website......
Message Edited by warriorking on 03-05-200706:40 PM

OAS 10.1.2 / chgiphost / EM-Console doesn't start after change of hostname

Hello!
I changed on my OAS 10.1.2 ip-address and hostname with script /$ORACLE_HOME/chgip/chgiphost.sh -mid.
But I can't start em-console and get the following error in em-application.log:
Portal Configuration Interface failed to initialise:
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: newHostname.domain:cn=oldHostname.domain...
It seem's that chgiphost.sh script doesn't change em-console configuration.
Any ideas?
regards
Harald.

Solution:
I secured Enterprise Mangager (HTTPS, emctl secure...).
First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
regards
Harald.

SCCM 2012 Console not accessible - SMSAdminUI.log - Error Code : ProviderLoadFailure

Hello Team,
        The site server which was working fine is now not accessible, unable to connect the console "Configuration manager cannot connect to the site"
* It is a standalone Primary with provide installed on the same server
* Recently Upgraded to R2 CU4. Base OS is Win 2K8 R2 Ent, SQL server is 2012
* I am able to logon to the SQL server and access the SCCM database and execute a SQL query
* I did try to connect to the WMI on the SCCM server using : wbemtest and connect to the SMS_ProviderLocation ()
* Tried restarting the server , still not luck
Any assistance will be of great help.
Following is the snippet of the error in the SMSAdminUI.log.
=============================================================
Error Code:
ProviderLoadFailure
\r\nSystem.Management.ManagementException\r\nProvider load failure \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'XXX'";
ProviderName = "WinMgmt";
\r\n
==========================================================================
Following is the error that I see in the Event log of the server
Transport error; failed to connect, message: 'The SMS Provider reported an error.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe SMS Provider reported an error.\r\n at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath) at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nConfigMgr
Error Object: instance of __ExtendedStatus { Operation = "ExecQuery";
==========================================================================

When updating to CU4, did you have the required permissions to update the database? I have seen similar errors when this has not been the case.
Have a look in
C:\Windows\Temp\CM12-R2CU4-KB3026739-X64-ENU.log
and see if you have any errors like this:
The EXECUTE permission was denied on the object ‘fnIsPrimary’,database
‘CM_P01’, schema ”dbo"
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Admin Console consolidation

I have a client that has 4 physical machines. Using Windows BEA 9.2 MP3...They installed an application in domain X (managed server ms1) Each box is
exactly the same. (except different machine IPs). Each machine has a Node Manager and Admin Console configured on port 5555/7001 respectively.
This requires a separate console session to manage each app.(4 authentications, etc...)
Q: Is it possible (without re-install) to elevate 1 of the admin consoles to have all the other node managers connect to it and then turn down the local admin consoles
running on each server. In essence re-configure the plumbing. (giving me a single pane of glass to manage each app)
The app is not cluster aware and the customer has chosen to use external load balancers to distribute the load to the (4) servers. (i.e ip addresses)
So this request is just to make an admins life easier. I am being told that an un-install and re-install is required.
Cross my fingers.
TIA
DJ

So you are saying that I need to
1.) create 3 NEW servers entries in one of the physical servers domains.(they are the same named name (i.e domain X) )the paths I will check, but i suspect they are the same.
Physical server ABC: domain X = ABC.X
server MS1 (existing)
add MS2, MS3, MS4
2.) pack each servers domains managed servers (MS1) from Physical server
Physical server 123: domain X = 123.X
pack MS1
Physical server 456: domain X = 456.X
pack MS1
Physical server 789: domain X = 789.X
pack MS1
3.) unpack servers???. (will the fact that the domain ABC.X already has a MS1 instance be a problem)?
how do you associate the unpacked MS1 entries from old physical servers to their NEW MS(X) placeholder entries on ABC.X?
Key ( Physical Server.Domain(ManagedServer) )
Aren't the existing managed servers :
123.X(MS1) and
456.X(MS1) and
789.X(MS1)
Already enrolled in the node managers on each of the physical servers(123, 456 and 789)???
Any help would be appreciated..
TIA
-DJ

EM console -configuration

Similar Messages

Maybe you are looking for