Email and Printing would be nice

The two things (so far) that I find myself wishing Bridge would do is to let me print a file directly and to send something by email with a keyboard shortcut or a right-click menu. Two things that I do often.

It would be great that Bridge prints thumbnails in different arrangements and with or without selected info.
I have used before Acedesee and Extensis Portfolio and I wold like Bridge to be better than this two aplications, that wold be cool... including the ability to see previews for non adobe file types, like CDR, or Word.... an address line to write or paste the folder where I want to see.. sort like the opperating system too please.... well...

Similar Messages

Dunning email and print at same time.

Hi all,
My client need to send Dunning document as email to the customer, at the same time they want to generate
printout also for the same. I have successfully send an email to customer email address.
But i am unable to generate print out for the same.
They need to generate email and print out out for the dunning..
My question is: can we generate both email and print out at the same time for the single run of F150 for one customer.
If it is possible please let me know how can we do it.
Thanks,
Raghav

it's not possible.
rohit

Dunning email and print both at a time

Hi all,
My client need to send Dunning document as email to the customer, at the same time they want to generate
printout also for the same. I have successfully send an email to customer email address.
But i am unable to generate print out for the same.
They need to generate email and print out out for the dunning..
My question is: can we generate both email and print out at the same time for the single run of F150 for one customer.
If it is possible please let me know how can we do it.
Thanks,

No,
I have by pass the dunning doc to generate the email instead of printing using BTE concept.
but my client need to print and email both at time at the time transaction F150 triggering.
Hope there is no way to change dunning standard print program to create in SAP. since it wont take any customer program to print
dunning documnets..
So, is there any way to get the print and email for the same dunning document.
Thanks,

F110 - program RFFOAVIS_FPAYM email and print at the same time

Hello all,
we are using program RFFOAVIS_FPAYM program for print and email paymnet advice. but the current scenario at a time only one process is woking email or print payment advice. but the user want to get the print and email adivce at the same time, but current only one thing is working.
kidly advice how to get email and print payment advice at the same time.
Thanks in Advance.
Abhilash

I Have the same problem
Any help is welcome

A friend used my computer, and sync is set up with HER email, and I would like to delete that and put in my email address.

I don't recall setting up sync acct. But am not computer savvy (can get by). Was checking out Sync and discovered that an acct is set up, but not with my email. My friend has used my computer, and I don't know if she meant to do it, but now acct. is under her email, and I would like to change this, but am afraid of deleting all data, and making a mess of something already messed up.

I hope you aren't saving passwords in Firefox, because your "friend" may have sync'd all your passwords to another PC.

I send out emails with proper grammar. People would reply returning my email and I would notice the grammar has changed and doesn't make sense. What's causing this problem?

I send out emails with proper grammar. People would reply returning my email and I would notice the grammar has changed and doesn't make sense. What's causing this problem?

Have you actually compared what you sent (in your Sent Mail Folder) with what is in the reply?
Note that Auto Correction can often change what you think that you are typing.
Are you sure that the return message has your original message intact and not edited by the recipient?
Bottom line: if the recipient does a simple reply to your message with the original message attached the system is not going to edit your message.

My apple I'd has been discarded for security reasons. The site asks me to give my email and they would send me the further instruction. But no Emil has arrived so far. Since January. And I did requested help multiple times. :( any ideas where can I solve

My apple I'd has been discarded for security reasons. The site asks me to give my email and they would send me the further instruction. But no Emil has arrived so far. Since January. And I did requested help multiple times. :( any ideas where can I solve

Who discarded the Apple ID? Apple? or You?
Did you answer the Security Questions? Is the backup email accurate? Have you tried contacting them?

Unable to schedule a report to email and print

I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
        IInfoObjects results = null;
        ISchedulingInfo schedulingInfo = null;
        try {
           results = iStore.query(query);
        } catch( SDKException sdke ){
           logger.error(sdke);
        if( !results.isEmpty() ){
            // get the actual report object from collection and set scheduling information
            IInfoObject report = (IInfoObject)results.get(0);
            schedulingInfo = report.getSchedulingInfo();
            schedulingInfo.setType(CeScheduleType.ONCE);
            schedulingInfo.setRightNow(true);
            schedulingInfo.setRetriesAllowed(3);
            try {
                Set<String> keys = destinations.keySet();
                Iterator i = keys.iterator();
                while( i.hasNext() ){
                    String dest = (String) i.next();
                    if(dest.equals(CrystalDestinations.EMAIL)){
                        // get the destination object and set it to SMTP plugin
                        List emailAddress = destinations.get(CrystalDestinations.EMAIL);
                        IDestination destinationObject = schedulingInfo.getDestination();
                        destinationObject.setName("CrystalEnterprise.SMTP");
                        IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
                        ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
                        smtpOptions.setDomainName( emailDomain );
                        smtpOptions.setServerName( smtpHost );
                        smtpOptions.setSMTPUserName( smtpUser );
                        smtpOptions.setSMTPPassword( smtpPass );
                        smtpOptions.setSubject( "Email for report " + report.getTitle() );
                        smtpOptions.setMessage( "This is the message body" );
                        smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
                        smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
                        for(int j = 0; j < emailAddress.size(); j++ ){
                            smtpOptions.getToAddresses().add( emailAddress.get(j) );
                        destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
                        List printers = destinations.get( CrystalDestinations.PRINT );
                        IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
                        printerOptions.setCopies(1);
                        printerOptions.setEnabled(false);
                        printerOptions.setPrinterName( (String)printers.get(0) );
                        printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
                List reportPrompts = ((IReport)report).getReportParameters();
                for(int j = 0; j < reportPrompts.size(); j++){
                    IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
                    if(prompt.getParameterName().equals(mdrParamName)){
                      IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                      v.setValue(reportParameters.get(mdrParamName));
                    } else if(prompt.getParameterName().equals(addressParamName)){
                        IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                        v.setValue(reportParameters.get(addressParamName));
                IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
                format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
                iStore.schedule( results );

Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan

Email and Printing Campaigns

Hi All,
We have specific requirement, where my cleint wants to create a campaign, like email or mailer campaign in CRM, But as per System Landscape of our project Email and Letter composition is sent through system called Streamserve, where stream serve will compose the letters and emails based on the template created in CRM with the Target Group attached.
Now how i can send the campaign details to streamserve, we have an issue because letter and email templates will eb created in CRM and streamserve can only recieve XML files.
I am lost how i can achieve thsi solution.
Regards
Arun Kumar

Hi Guys!
Sorry for a late reply but anyhow...
Which version of StreamServe are you using? And which version of CRM?
Some background/general points:
When it comes to integrating StreamServe with SAP you have a number of basic options/interfaces supported by StreamServe:
- IDocs
- XML (generic)
- RDI ([Raw Data from SAPScript|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fd07c590-0201-0010-9a82-c767532203a6]:
- XSF ([XML Output for SmartForms|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d763c290-0201-0010-95ae-985957613e90])
- XFP ([XML Output for PDF-based forms|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd00f9-7671-2910-99bb-e5a004a8e1c9])
- XFA support (formatted PDF-based print forms)
- SAPGOF ([OTF from SapScripts and SmartForms and ABAP List|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f036ff36-b6d4-2b10-978c-e78131dce2db])
Additionally you could set up StreamServe as an External Output Management system in SAP Spool Administration (SPAD) (since we have support for the [XOM|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c8feb390-0201-0010-27ae-fbf9a2684cec] interface) which would let you track status of spool requests sent from SAP to StreamServe .
The availablility of all that depends on which version of StreamServe you are using, license etc...
Now to your specific problem....
What I've seen some StreamServe & SAP customers do when using StreamServe with CRM is that they:
1) Do the layout of the document/form in StreamServe
2) Set up CRM to output generic campaign data as XML or CSV to StreamServe (or using Idocs).
In this scenario you could, e.g. if end-users/business users are designing the documents from within CRM Web UI, use either StreamServe Composer och CompositionCenter (which are web based applications) to let end-users have an easy way of updating some sections of the marketing/campaign documents. To add new campaign messaging, images etc. You could also add a direct link to those applications from withing the CRM Web UI by doing some customizing - to let the users have an integrated view.
1') Alternatively if you are using the Marketing/Mail Forms which is a kind of SmartForm (transaction CRMD_EMAIL) then you can set up them for print output using OTF/SAPGOF which would let StreamServe handle that data pre-formatted.
Post back again if unclear.
Rgds,
Christian

There was away (before Mavericks) I could single click on an email and it would highlite but not open. I could either delete or second click and the email would then open. Can anyone tell me how to configure the prevue pane to that end with Mavericks?

There was a way (before Mavericks) I could single click on an email in the "prevue pane" and it would highlite but not open. I could then either delete it or click again and it would open. With Mavericks that doesn't seem to be available making it impossible to delete an email in the prevue pane before I open it. Its frustrating to have to go through all the monkey motions when I know I want to delete it from the get-go. Does anyone know who to configure for that operation? I'm using an iMac.

Wow, have you ever seen 1 Billion in hard cash? If not, I assure you it exists as well.
Try not to pick apart what others write because you "have not seen it."
I run TWO programs for protection of my MAC now and have been for sometime b/c developers of them become complacid thinking MAC is impermeable.
My MAC locked me out of it and two externals and when I finally did get back into them Norton Anti-Virus found a "worm." When I asked the program to find the origin, it was traced back to an email, as you said, that I opened unintentionally. I still have two external HDs for backup and a cloud backup now.
When ClamX ran after Norton was finished, ClamX found what it called as "spyware," and it's origin was in my email also. I tried to delete the emails after the programs (both) identified the infected files, however once deleted and the computer is restarted, they were still there because I ran the scans again.
Now since we are no longer talking about how to turn on and off the view pane in apple mail; riddle me this, why can't the developers of these antivirus and antispyware/malware programs get together and develop ONE PRODUCT that catches 90-95% of the viruses/worms/spyware/malware ect that get onto MAC's? Is it because they are too busy thinking they don't exist?
I still run both programs and feel protected between the two. If Norton said it was a "worm" then I believe it was a worm and if ClamX called it "spyware" then I believe it is spyware.
I had to wipe my MAC and do a fresh install to get it working again, then I had to open one of those externals (which was very, very difficult) multiple times until finally it displayed the message "you can view, but not change the data." I exported as much as I could to my cloud and I had to format both of those too.
I still run both programs as I feel protected between the two. If Norton tells me it is a "worm" then I believe it is a "worm;" if ClamX tells me it is "spyware" then I believe it is "spyware." If it happens again, which my hope is that it won't, I will be more than happy to send the infected files to you!!
Try not to "forum rage." Support forums to post experiences and find answers, not nit-pick or claim not existance b/c you have not experienced it for yourself.

Remittance advice through email and printing

Hi Experts,
Our requirement is that email needs to be triggered for all remittance advices and simultaneously printing needs to carried out for those vendors with no email address or invalid email address. We have activated BTE 2040 to trigger the email and it triggered the email(for vendors wth email addr only) and sent it to the spool( for vendors with and without email addr) . Now our requirement is to select only few vendors from the spool for printing. How do we go about it please guide .
Thanks and regards,
Ashwin G

Hi,
For this first you have to maintain the respective email ids for the vendors/payees in your vendor master
Secondly, create a zmail program wherein once the ACH payments are executed, the z program should trigger an email to the respective payees. You have to co ordinate with your abaper and provide him the FS and requirements so that he can develop the required program. Assign a Tcode to the program which should have selection parameters Run date and identification ) to trigger email to respective payee in ACH payment list.
Hope this clarifies.
regards,
radhika

Using Applescript to open a link in an email and printing out the result

This may have been answered before but I can't find it. Does anyone have a script that can read an email to find a link contained within it, open said link and then print it?

Tried that. Unfortunately it did not work.

Email and print says not enough storage

MMy email does not display and I canot print. An box appears and says dele songs apps videos etc for more storage. I just backed everything up in I cloploud and purchased for 99 cents a month more storage but the problem still exists. Help p,ease thank you

If you have done basic troubleshooting
Reset
Restore etc ,
or cannot because of the buttons issue take it to an Apple retail store Genius bar for them to check it
You have 12 months warranty from date of original purchase for manufacturing faults
Have look here first
http://support.apple.com/kb/TS3281

Until today I could click on links in my Outlook email and it would pull up with Firefox. No More. could it be related to new Java download I did this a.m.?

I have MS Office 2007 on my computer and Firefox set as my default browser. This a.m. I ran a Java update. That may/may not be relevant. Now, in my email when I click on a link... nothing apparent happens. I changed to IE as default browser and it opens a file but IE is so messed up I could not even read a whole article before it crashed on me. Please help me get my email to work with Firefox again.

My first thought was a mouse problem so I connected my original wireless mouse and turned off my magic mouse (fresh batteries as well) and it had the same problem.
Since this was a recent issue I checked some apps I added a few days ago and they may have been the problem. Each of them had an option of "keep tab visible as a background app" which I just disabled and for now it seems my mouse is back to normal.
I will definitely try resetting both PRAM and SMC if the issue returns.
Thank you for responding and offering help, really appreciate it!
~Suzy

Digital Signature prevents submit via email and print

A form works perfectly well until I insert a digital signature into a digital signature box. So if the digital signature box is empty the buttons still work but sign the wrecked thing and nothing works anymore. I have created new signatures but nothing seems to work. Can you shed any light on this?

The problem is that the "Lock Fields After Signing" property is enabled (see attached screen shot). Buttons are considered fields, therefore when the signature is applied, the buttons are locked and can no longer be clicked. To fix this you can disable the property, or better yet create a field collection and select the specific fields that you want to lock if a signature is applied.
Regards
Steve

Email and Printing would be nice

Similar Messages

Maybe you are looking for