Email crashing and taking too long to send an attachment of 500 KB
Well I have a brand new MBP $C i7 2.5 GHz 8GB RAM with clean installed in its 1st week. The email is crashing when I try to send the attachment bigger than 1 MB. It slows down everything when I try to send a normal email and the time it takes to send a simple email is 3 to 5 minutes .
What I have done so far:
Clean install
Change the app to 32-bit run it, quit it, change back to 64-bit and run it. Repeaed many times
Nothing is working out now.
From logs I can see that the mail app is using too much memory and processor while running. Help please
Are you using Transport.send to send each batch? Or are you using a single
Transport object that you connect before the first message and close after
the last message? If you're doing the former, try the latter, it will likely be much
faster.
Also, sendmail may be configured to throttle the rate at which you can send
messages; you might want to check with a sendmail expert on that.
Similar Messages
-
My company has several TVs with AppleTVs (3rd generation units) connected in our conference rooms so we can "Screen Mirror" our Mac laptops via AirPlay during meetings. Many employees have complained that AirPlay Screen Mirroring drops frequently during meetings for no apparent reason.
In attempts to determine the cause of the issue, I removed the AppleTV units from Wi-Fi and hard-wired them all to the LAN (100Mbps/Full duplex, no switchport errors seen on the Cisco switch). I upgraded the AppleTVs to the latest firmware. I had our AppleTV users ensure they were running MacOS Mavericks with the latest software updates installed. I had the Mac laptops hard-wired into the LAN during meetings in the conference rooms. None of these changes resolved the AirPlay issue.
I reviewed the MacOS "/var/log/system.log" file from the laptops of several users that reported issues. I found a pattern that seemed to indicate that the "coreaudiod" process reported "Feedback taking too long to send" several times before the AppleTV connection was terminated. Also, from a network trace (using "tcpdump") taken during an unexpected AirPlay Screen Mirroring disconnection, I could see that the Mac laptop sent a TCP FIN packet to the AppleTV unit (this would indicate that the MacOS laptop initiated the closing of the AirPlay connection).
I have included the relevant log file entries below. Please note that the LAN internal to our company is "solid" and there have been no connectivity issues detected or reported during the times the AirPlay sessions were disconnected.
I believe I have found a workaround to this issue. By going into "System Preferences", "Sound" and then changing the "Output" device BACK to the "Internal Speakers" (rather than the AirPlay destination), the AirPlay Screen Monitoring connection seems to remain stable.
My questions are:
- is anyone else experiencing this type of problem? any other solutions recommended?
- is there a way to change the AirPlay defaults so that Screen Mirroring only sends the video (not audio)?
- does anyone know what the log file entries indicate (like, what does "Feedback taking too long to send...." mean)?
- any fix planned for this issue?
From: "/var/log/system.log":
Jan 16 10:50:16 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:16.454404 AM [AirPlay] ### Feedback taking too long to send (1 seconds, 1 total)
Jan 16 10:50:18 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:18.524517 AM [AirPlay] ### Feedback taking too long to send (4 seconds, 2 total)
Jan 16 10:50:20 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:20.533639 AM [AirPlay] ### Feedback taking too long to send (6 seconds, 3 total)
Jan 16 10:50:22 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:22.548168 AM [AirPlay] ### Feedback taking too long to send (8 seconds, 4 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554522 AM [AirPlay] ### Feedback taking too long to send (10 seconds, 5 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554809 AM [AirPlay] ### Report network status (3, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:26 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:26.545531 AM [AirPlay] ### Feedback taking too long to send (12 seconds, 6 total)
Jan 16 10:50:28 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:28.559050 AM [AirPlay] ### Feedback taking too long to send (14 seconds, 7 total)
Jan 16 10:50:30 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:30.628868 AM [AirPlay] ### Feedback taking too long to send (16 seconds, 8 total)
Jan 16 10:50:32 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:32.655638 AM [AirPlay] ### Feedback taking too long to send (18 seconds, 9 total)
Jan 16 10:50:34 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:34.641952 AM [AirPlay] ### Feedback taking too long to send (20 seconds, 10 total)
Jan 16 10:50:36 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:36.659854 AM [AirPlay] ### Feedback taking too long to send (22 seconds, 11 total)
Jan 16 10:50:38 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:38.653594 AM [AirPlay] ### Feedback taking too long to send (24 seconds, 12 total)
Jan 16 10:50:40 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:40.659279 AM [AirPlay] ### Feedback taking too long to send (26 seconds, 13 total)
Jan 16 10:50:42 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:42.745549 AM [AirPlay] ### Feedback taking too long to send (28 seconds, 14 total)
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.532853 AM [AirPlay] ### Endpoint "AppleTV" feedback error: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533151 AM [AirPlay] ### Feedback failed: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533273 AM [AirPlay] ### Error with endpoint "AppleTV": -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533427 AM [BonjourBrowser] Reconfirming PTR for AppleTV._airplay._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533588 AM [BonjourBrowser] Reconfirming PTR for 9C207BBD8EA1@AppleTV._raop._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533839 AM [AirPlay] ### AirPlay report: Network dead for 10+ seconds after 159 seconds, screen, nm "AppleTV", tp WiFi, md AppleTV3,1, sv 190.9, rt 0, fu 0, rssi -54
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534104 AM [AirPlay] ### Report network status (5, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534315 AM [AirPlay] Deactivating virtual display stream for quiesce
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543682 AM [AirPlayScreenClient] Stopping session
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543815 AM [AirPlay] Quiescing endpoint 'AppleTV'
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543907 AM [AirPlayScreenClient] Stopping session internal
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.544218 AM [AirPlayScreenClient] Stopped session internal
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.544266 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.544297 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.553084 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.554904 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.557604 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.560307 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: Display 0x04280880: GL mask 0x21; bounds (0, 0)[1920 x 1080], 62 modes available
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000001f, accelerator 0x00004ccb, unit 0, caps QEX|MIPMAP, vram 2048 MB
I am happy to provide more information if needed.
Thank you.
-TimI'm currently still experiencing this as well. I've confirmed it occurs on 10.9.1, 10.9.2, and 10.9.3 on MacBook Pro Retina's, Mid-2012 and 2013 MacBooks. It happens on multiple ATV's not just one, all are updated to 6.1.1 and a simple reboot seems to fix it temporarily but it does come back. All the ATV's are connecting to the network via Wireless not Ethernet. These are 3rd Gen ATV's but I checked the serial number and these do not match the bad batch of Apple TV's from 2013 that were offered up for Replacement for Apple due to the bad firmware update. None of the computers have the Firewall turned on. Here's the two logs that we always find after the issue occurs (logs are recent, happened this morning):
5/30/14 8:57:36.017 AM coreaudiod[183]: 2014-05-30 08:57:36.016946 AM [AirPlay] ### Feedback taking too long to send (30 seconds, 17 total)
5/30/14 8:57:36.332 AM coreaudiod[183]: 2014-05-30 08:57:36.331492 AM [AirPlay] ### Feedback failed: -6723/0xFFFFE5BD kCanceledErr
The user will get disconnected from Airplay anywhere between 30 seconds to 3 minutes after logging on and can reconnect but then once again get disconnected after the same time period. One interesting thing to note is that when the Feedback Taking Too Long to send error starts occuring and the countdown to disconnect start ticking down to 30, its solely referring to Audio not being sent over the network and Video is working just fine. If I try to play sound I get another log and the sound doesn't play through the speakers. After a reboot, sound works fine and the Feedback Error's do not show up. I've also tried switching to Internal Speakers (since it defaultly switches to Airplay Speakers) after connecting to Airplay and seeing the Feedback timer start in the Console Logs but even after that the log continues to saw its taking too long to send and disconnects in 30 seconds.
This issue has been ongoing for months, I've got a ticket logged as far back as January with this occuring but its infrequent enough that we've just restarted and moved on. I'd say its an issue that occurs to about 5%-10% of meetings but that's an entire meeting that doesn't have the ability to Airplay until someone comes down and reboots it.
I don't often post in this forum but its still an active issue with no resolution, proof that its occuring on other people's systems, and no firmware updates having been released to correct it. It'd be nice to know of any workarounds other than having to buy some lamp timers for each conference room just to get a functional ATV or putting up a sign that says hey if you get disconnected every 3 minutes, reboot the ATV. The whole reason we're using Apple products is for ease of use otherwise I'd put together a much cheaper solution myself. Any help or recommended troubleshooting steps would be fantastic at this point. -
I can't view my website at www.artisancandies.com, even though it's working and everyone else seems to see it. No, I don't have a firewall, and it's not because of my internet provider - I have AT&T at work, and Comcast at home. My husband can see the site on his laptop. I tried dumping my cache in both Firefox and Safari, but it didn't work. I looked at it through proxify.com, and can see it that way, so I know it works. This is so frustrating, because I used to only see it when I typed in artisancandies.com - it would never work for me if I typed in www.artisancandies.com. Now it doesn't work at all. This is the message I get in Firefox:
"The connection has timed out. The server at www.artisancandies.com is taking too long to respond."
Please help!!!
Kristen ScottLinc, here's what I've got from what you asked me to do. I hope you don't mind, but it was simple enough to leave everything in, so you could see the progression:
Kristen-Scotts-Computer:~ kristenscott$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Kristen-Scotts-Computer:~ kristenscott$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.adobe.versioncueCS3
Kristen-Scotts-Computer:~ kristenscott$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.google.keystone.root.agent
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
Kristen-Scotts-Computer:~ kristenscott$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
Adobe AIR.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Disabled Plug-Ins
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
Google Earth Web Plug-in.plugin
JavaPlugin2_NPAPI.plugin
JavaPluginCocoa.bundle
Musicnotes.plugin
NP-PPC-Dir-Shockwave
Quartz Composer.webplugin
QuickTime Plugin.plugin
Scorch.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.google.keystone.agent.plist
/Library/LaunchDaemons:
com.adobe.versioncueCS3.plist
com.apple.third_party_32b_kext_logger.plist
com.google.keystone.daemon.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
VersionCue.prefPane
VersionCueCS3.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
/Library/StartupItems:
AdobeVersionCue
HP Trap Monitor
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Internet Plug-Ins:
Move_Media_Player.plugin
fbplugin_1_0_1.plugin
Library/LaunchAgents:
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
Library/PreferencePanes:
A Better Finder Preferences.prefPane
Kristen-Scotts-Computer:~ kristenscott$ -
Regarding iPhoto '11 9.5 (902.7 build running on an older Intel based MacBook Pro with iPhoto libraries on a USB2 External HD). I am dealing with iPhoto taking too long to download photos. Specifically, I rechecked and repaired HD permissions. I am running the most current software my five year old Intel MacBook Pro can run. What happens is that when I connect an external SD card, or my iPhone, the new version of iPhoto takes up to two full minutes to fully acknowledge the device. Then locate new photos and be ready to download them to my external HD. I am kind of concerned about this. This has never happened before.
I take 20,000 photos a year. I really don't want to lose any. Or is there something I am doing wrong? Or need to be aware of? Any experienced suggestions would be appreciated. Thanks. Have a great day.
PS.... The cameras I use are Canon SX-30, Nikon D3100, and my iPhone 4S. Thanks again for your assistance.Hello Old Toad.... Those sound like great ideas.
I thought I checked and repaired disk permissions on my main boot HD. That boot disk is Mac OS Extended (Journaled) Capacity 749.3 GB. Available 562.53 GB. BUT.... now that I think of it.... the Seagate external HD with USB2 interface is: Mac OS Extended (Journaled), Capacity 639.79 GB, Available 36.2 GB with my latest iPhoto Library 517.37 GB that was already scanned & updated to be read by the latest iPhoto version.
I'll try your suggestions tonight as far as double checking 'permissions' and setting up a tiny test library.
Or maybe it's time to fill up another External HD?
I appreciate your and anyone else's suggestions to try.
Have a great day. ~~ David in Rochester NY -
My email crashed and my ICloud icon disappeared by my system and reverted to mobile me which of course is no longer available. Any ideas on what to do?
You'll actually need to order a snow leopard DVD first. Then you can download mountain lion via the app store. Confirm you meet the requirements: http://www.apple.com/osx/specs
If you dont, you might be able to get lion instead. That's an order over the phone, to get a redemption code.
And make sure you're actually contacting apple: http://support.apple.com/kb/HE57
You'll also want to confirm your 3rd party apps are compatible before an OS upgrade. Of course, you'll also want to backup your data.
Message was edited by: Imp68 -
I was backing up my iphone by changing the location of library because i don't have enough space.My phone was taking too long to copying file so i can celled it.the data is stored in desired location . And now i can't delete that back up.
Also tell me about the performance of iphone 4 with ios 7.1.1...........
T0X1Crabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage. -
i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it.... -
my apple id has been disabled and when i am trying to reset my apple id passwrd it is sending me mail to my registered email id and i no longer have access to that email id, totally confused what to do since my iphone 4s is stuck upon activation of icloud
http://support.apple.com/en-us/HT201356
-
We have purchased a movie via Apple TV (2) and its taking too long to load, so we want to watch movie on Itunes on the computer but can't find rented movies on the MAC iTunes
Movies rented on Apple TV aren't transferable to another device. If its taking awhile to load then its an issue with your network.
What is your speed via speedtest.net
1080p requires 8mbps
720p needs 6mbps
You can change to SD in settings
Interference can cause issues, verify via istumbler or netstumbler
Should be using ISPs DNS (settings - network - DNS should be automatic) -
My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
ive been trying to download for hours now and its taking too long, i have places to go but i dont want to leave the wifi area if it will harm my iphone and the ios7 software isn't finished downloading...
I think you can stop the download without any harm coming to your phone. But if it is actually installing and not just downloading, I would let it finish.
-
I just rented an HD movie, but it's taking too long to download and I would now prefer to download the regular version. Is there a way to change the quality without paying agin?
Welcome to the Apple community.
Unfortunately you cannot re-download rentals, allow it to finish and enjoy it and consider the situation for further rentals.
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps. -
'Erase All Content and Settings' i selected it and it's taking too long it's not even loading! Is it really tooks a several hours ? is there any problem how can i fix it. Please tell me
Likewise bro... atleast mine has the Apple logo... and the circular thing... I saw this online and i'll be trying it ASAP... http://support.apple.com/kb/HT1808
-
Database open (recovery) taking too long
Hi,
Ive been using your awesome BerkeleyDB Java Edition for a couple of years, and have been very happy with it.
I am currently facing an issue with trying to open the database after a disk-full issue (which resulted in the database being unable to write, and hence not closed properly).
While recovery seems to be operating, it has been taking an inordinate amount of time - 16 hours so far. My database has data of around 200GB, which inflated to over 450GB during deletion of entries, hence gobbling up all free space on disk.
My questions are:
* Should i continue to wait for recovery?
* Is there any chance that recovery is looping?
* Is there an easier way (DBDump?) to extract data from the database without having to perform recovery?
Some other information that may help:
* The recovery has decreased the size of the last significant file, and created 3 new files since it started running.
* I have been monitoring the open files (using lsof), and they change every now and then to other files, though a good amount of its time is spent near the end of the database.
Thus, i feel like recovery is running normally, just taking too long. Please let me know your opinion.
A few other things i should mention regarding my issue:
* The database was, till yesterday, running on bdb java 3.3.75. After running several hours of recovery, i upgraded to 4.1.10 (since i read about a possible recovery looping bug in one of the versions)
* Once 4.1.10 started recovery, it spat out errors regarding the last 2 files. Only on deleting those 2 files (the last being 0 bytes, the 2nd-last being about 5k) did the recovery start. Note that the older 3.3.75's recovery never complained about those files. I can post the errors here if relevant.
* Some of the jdb files (about 500 files out of the 47,000 files that make up the database) are 100 MB files, since i had experimented with larger sized files for a few days, then reverted the setting.
Would any of these above affect a successful recovery?
My setup is:
OS:Linux CentOS 5.2, 64-bit, kernel 2.6.18-92.el5
JVM: Sun Java 1.6.0_20, 64-bit
Memory: 16 GB RAM, of which 8 GB is allocated to the java process (-Xmx8000M -Xms8000M)
BDB cache set to use 6GB RAM (envconfig.setCacheSize(6000000000))
Only the BDB basic API is being used (Environment, database, cursors). We do not use DPL, or HA features.
Awaiting your kind response,
Sushant AHi Sushant,
* Should i continue to wait for recovery?* Is there any chance that recovery is looping?>
I'm not aware of a bug that would cause recovery to loop, however, you may want to take thread dumps to see if it is progressing. It isn't easy to tell, however, since each phase of recovery is in fact a loop. What you can tell easily from the thread dumps is whether recovery is blocked (completely stopped) for some reason. I don't know of a bug that would cause this, but it's something I would check for.
Assuming it is not blocked, I suggest that you leave recovery running, and additionally (in parallel) try to obtain some information about your log. While recovery is running you can run the DbPrintLog utility, which does not itself run recovery. I suggest running the following command, which will tell us in general what your log looks like and in particular how far apart the checkpoints are:
java -jar je-x.y.z.jar DbPrintLog -h <envHome> -S > <output>Please post the output.
If checkpoints are not running in your application for some reason, or they are running very infrequently, this can cause VERY long recoveries. Unfortunately, you may have such a problem in your app and not be aware of it, until you crash and have to recover. To guard against this sort of thing in the future, you should keep an eye on the checkpoint frequency. EnvironmentStats.getNCheckpoints and getEndOfLog can together be used to tell how much log is written between checkpoints. We will also be able to see this from the DbPrintLog -S output.
* Is there an easier way (DBDump?) to extract data from the database without having to perform recovery?DbDump normally runs recovery. DbDump with the -r or -R option does not run recovery, but has other drawbacks. With -r, a large amount of memory may be necessary to dump an accurate representation of your data set. If this fails because you run out of memory, -R can be used, but this will dump multiple versions of each record and it will be up to you to interpret the output.
If regular recovery does not succeed, then DbDump -r is the next thing to try.
Would any of these above affect a successful recovery?No, I don't believe so.
--mark -
Hi
Windows XP clients are taking too long to login after connecting to the domain.
i have the following setup
Site A - WIndows 2008 R2 in WINdows 2003 Native Mode, 2 DC's , both GC, Subnet mapped to Site A
Site B - WIndows 2008 R2 in WINdows 2003 Native Mode, 1 DC, GC, No subnet Map except the local subnet
Site C - no servers, users are authneticating from "Site A"
but when i am login from the XP machine, it is trying to login to the Site B DC which is not mapped to Site C, is there any specific way to address this issue,
it is ok with windows 7
DEPAHi,
In addition to the above troubleshooting suggestions, please also refer to the following links for more troubleshooting information:
Troubleshooting the intermittent slow logon or slow startup
http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
Troubleshooting Slow Logons
http://support.citrix.com/article/CTX101705
Regards,
Arthur Li
TechNet
Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Arthur Li
TechNet Community Support
Maybe you are looking for
-
How many upgrades do I need to upgrade from 10.4.11 to get to Lion?
I have been going through all the other posts and my head is spinning. Some of the answers seem contradictory and confusing esp since I am not all that versed in computer stuff. Anyway, I have a: MacBook Pro 3.1 Version 10.4.11 2.4 GHz Intel Core2D
-
Hi I desperately need help to fix this error. I installed Adobe LCES4 with ssl enabled and i can access the adminui and workspace on the browser but he problem is when i try connecting to launchpad using https on the server even doing the simple thi
-
Need a good App to help with School
I am looking for a good App that I can use to take notes on for college. I will be taking Organic Chemistry and Biochemistry. I want to be able to type in text because I can type must faster than I can write in manuscript, but I also want to be able
-
Link to folder in a room - missing header area and navigation panel
Hello Community, I have a problem, again. While creating favorites to specific folders I got a problem while using and "publishing" them. While using the "send to..." feature the recipient gets an eMail with the link to this folder. When clicking thi
-
System requirement tp install Utilities Best practices(utilities-V1.500)
Hello All, We want to install SAP Best Practices for Utilities (UTILITIES - V1.500) in our landscape. I checked the system requirements proposed by SAP and observed that most of the s/w releases they are reffering to are ECC5 (500) and our system is