Email fails after 3 sends

We are having a strange problem.Error message 016-781Sending to the same user from the xerox machine it will successfully send emails 3 times but on the 4th one it fails with the 016-781 error. Then it will email another 3 times then fail again and so on. Our mail server is exchange. Anyone come accross this issue. Than ks in advance.

Have an exception added in the Exchange server for the account and IP of the printer to whitelist it from being checked by the spam filter. Look at it from the perspective of the Server. Someone is sending an email to the same person in quick succession where the subject line, message body, attachment type, file name, footer etc etc are identical, the only thing different from the servers perspective is the size of the attachment. This is not an issue for a user who sends an email occasionally , but it very much is when sending 3 or more in quick succession (under 5 minutes typically)  

Similar Messages

  • X6 32gb Email fail after v12 update. May happen on...

    Hi
    Has anyone experienced problems with Email app post update to v12?
    I have the visible email notification bar across the home screen but it now is empty! Press it and nothing happens.
    I have tried to disassociate my inboxes and retry but still same problems. I also tried to reapply the backup I took pre update but no luck as it does not backout the firmware update.
    This is so annoying as now I am having trouble create my inboxes at all.
    Is there a way to delete and reinstall the Email App?

    i don't have X6 but as i saw from others, they did a soft reset then it worked again. ... backup your phone and do a soft reset *#7370#
    i always do this after phone firmware update
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Outgoing Emails fails after Port 25 blocked by email administrator

    Hi, our email team administrator has blocked the port 25 and restricted user to use SSL port 465 instead. The share point SMTP email setup page only shows TLS encryption check box (no ssl encryption check box available)
    Is this a limitation on share point 2010 that only TLS encryption available? Please kindly advice.
    Thank you.

    Hi Layman,
    According to your description, my understanding is that you want to configure the SMTP to use port 465 for outgoing email in SharePoint.
    Per my knowledge, Exchange server will secure communication over any port, but will not use SSL, so there is only TLS encryption in SMTP.
    To use port 465, we can add the port 465 under Network tab to the Receiver Connector for SharePoint Outgoing email. And then TCP port number on Outbound Connections in
    DSMTP Virtual Server properties.
    More references:
    http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
    http://support.microsoft.com/kb/829721/en-us
    http://social.technet.microsoft.com/Forums/exchange/en-US/8dc08cf8-8662-4a02-a181-f821e8d59d06/exchange-smtp-using-port-465?forum=exchangesvrgenerallegacy
    For more information, you can post your question to the forum for Exchange: http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserverlegacy .
    More experts will assist you, then you will get more information relation to Exchange.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Send Email Fail... SOLVED! WVC80N

    I bought this camera yesterday to monitor the entrance to my house, and in case anyone decided they wanted to break in and take anything, I would have them caught on video.  All I wanted this camera for was so that I could monitor my house from the road, but mostly to have it automatically record a short clip and send it to my email account, where it would sit until I actually needed to "pull the tapes".
    However, like so many others, I could not get the "Test Email" test to work.  I would constantly get "Send Email Fail - [email protected]".  I had verified time and time again that the settings in the  camera were correct.  But it just wouldn't work.  From what I have read, email "servers" like hotmail, msn, yahoo, and gmail WILL NOT WORK to SEND the email, you must use your ISP's email settings.  That being said, even with my ISP's settings correct, the test would still fail.  Here is how I fixed it:
    If you are having this problem, you have probably come across some posts where the words "port forwarding" were found.  That is, indeed, the problem.  I don't know that much about networking anymore, but I will tell you how I got my camera to finally send emails.
    I have a linksys WRT54G wireless router.  What I had to do was set up the router to forward port 1024 to the IP address of the camera.  If you have the same router I do, simply go to 192.168.1.1 in IE.  The default login "I think" is "admin" and just leave the password blank.  If you don't have the same router, you'll have to look into the documentation to find out how to log in to your router.  (Note: Sometimes when I go to 192.168.1.1, I get an error that it can't be displayed.  Rebooting everything and saying a few hail mary's usually fixes this.  Go figure).
    Once you are in to your router, and in the case of the WRT54G, click on "Applications and Gaming".  Make sure you are on the Port Range Forward tab.  The first field is just something to remind you what the trigger is for.  I put "Camera".  Next, at start and end, I put "1024" for both.  For the protocol, I left it at "BOTH".  Then I just put the STATIC IP address of the camera into the field, which in my case was 192.168.1.218, and clicked ENABLE, and APPLY at the bottom.  Suddenly I got about 15 emails on every account which I had setup, including my ISP's server and GMAIL.
    To find your camera's IP address, hopefully you have setup the TZO account (it's free to try) and go to your web address www.YourName.MyLinksysCam.com and click on Advanced Settings.  On the basic settings, it will have some fields that should say like IPv4 Only, Fixed IP Address, and the IPv4 Address, which in my case was 192.168.1.218.  This is the number that you need to forward port 1024 to in your router settings.  Once you know that number, I would print out a little sticky label and put it on the base of the camera so that if you ever want to log into it again directly from your network (not remotely), you can just type that address into IE and change the settings.  Also make sure in your camera's settings that on the Options tab, UPnP is Enabled, Alternate Web Access Port is Enabled, and is 1024.  I guess you could change this number if you wanted, just make sure you forward that new number in your router settings as described above.
    Don't forget to set up the motion sensitivity.  For now, I have mine full screen and max sensitivity.
    I hope this helps, it was very frustrating for me.

    Well I've had no luck either.  Spent over 4hrs chatting with the support group and ended being four time more frustrated than when I started.  In all seriousness I would say I spent atleast 40% of that time trying to educate the support reps as to what the problem was.
    In the end I checked my wrt610n router and under single port forwarding the settings redcrawl mentioned where already there.  So it may be that Cisco has attempted to make the changes needed but regardless of these changes I still can't get it to work with Hotmail, Yahoo or Gmail.  Just for everyones info I've listed their respective smtp servers and ports below:
         Outgoing SMTP Mail Servers:
              Hotmail  -   smtp.live.com                       Port  -  25
              Yahoo  -     smtp.mail.yahoo.com          Port  -  25
              Gmail  -      smtp.gmail.com                   Port  -  465
    In any event, I would have to say that I've been a Linksys/Cisco loyalist up to this point but after this experience it looks like I'm going to go with another brand.
    Good luck everyone and to the forum administrators I would change the title of this topic from "SOLVED" to "Pending".
    (Mod Note: Edited for guideline compliance.)

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • After installing Windows 8.1 on my Nokia Lumia Icon , I no longer receive email, although I can send it.  How do I fix this problem?

    After updating to Windows 8.1, I no longer receive email, although I can send email.  How do I fix this problem?

        Lets ensure your service device is running in top form! What email account are you using? ( ie, Google, Yahoo, etc) Have you removed and re-added the e-mail address since this occurring?
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • Email program fails after installing DM

    I've tried several Desktop Manager versions however after installation Outlook and Windows email fail to initialize. Is there a way to run it from a disk? Any help would be appreciated.

    can't tun from disk.
    can you write down the exact error message(s) ?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Send email notification after unlock account in OIM 11gr2

    Hi,
    there is OOTB email notification is availabe for sending email notification after unlock aacount.
    could anyone please provide a way to do that...

    any suggestion...

  • Please send email to Yvonne.  I have a password only Ohrid email only after the update

    Please send email to Yvonne.  I have a password only Ohrid email only after the update
    <Personal Information Edited by Host>

    I am putting in my correct birthday and the password that I am sure is right and it is telling me to check my network connection even though my connection is working fine. I don't know what else to do!

  • My iMac drops settings information.  Sounds associated with receiving and sending an email disappear after about a week and return following a restart after a shutdown.  Also my picture taken, which was taken about a year ago, recently disappeared.

    My iMac drops settings information.  Sounds associated with receiving and sending an email disppear after about a week and return following a shutdown and a restart.  The cycle contunes.  Also, the picture of me that was taken when I bought the iMac more than a year ago and appeared at logon recently disappeared and was replaced by a soccer ball.  I took a new picture, which appeared for about a week at logon, and it has now been replace by a blank picture.

    The standard procedure with these types of isues is a PRAM reset.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Excerpt from http://support.apple.com/kb/ht1379

  • I'm trying to reset my Apple ID password. They said they will send me an email but after months I still did not receive it.

    I'm trying to reset my Apple ID password. They said they will send me an email but after months I still did not receive it.

    Your password was sent to your emergency email address.  Perhaps you have an email you never use?   I use the free email from my cable TV account as my emergency email.
    Your Apple account and cloud account are separate.   You could even have completely different user and password.   Most of us use the same user ID and password, but they are not the same thing, don't mix them up.
    If you can't retrieve emergency email, you will have to call apple support.
    http://support.apple.com/kb/HE57

  • TS3899 Why can't I send email messages after 7.1?

    Why can't I send email messages after 7.1?

    Hi Honeylev,
    Welcome to the Support Communities!
    The article below will walk you through the troubleshooting steps for email on your iPhone:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    I hope this information helps ....
    Have a great day!
    - Judy

  • ICloud adds a Last Name to my contact after I send an email - why?

    I record all my Contacts in iCloud without last names, for example I will load 'John Smith' as a First Name, and leave the Last Name field blank.
    When I send John Smith an email via Mail, the Contact Card will automatically change his name to John Smith Smith (ie adds a Last Name field).
    I have one contact loaded as Tom , and after I send him an email, his Contact Card changes to Tom - iCloud adds a to the Last Name field.
    Have been to the Genuis Bar at my local Apple Store and have had no luck.

    It's Apple. Apple has taken to embracing the good old Microsoft paradigm - your OS knows what you need more than you do. Apple won't fix this 'bug' because it's not a bug to them.. it's intentional. If the last name field is left empty, then the field is filled in if possible using info from other fields. I put fist and last name in first name field because I think in terms of first names and I want contacts sorted by first names for my own quick reference. Apple doesn't like my way of thinking, so it has been incessantly trying to correct it for 4 years. Thanks Steve Jobs Jobs.

  • My phone will not send emails even after the IOS 8 update. I continue to get the message of user name or password for my email are incorrect.

    My phone will not send emails even after the IOS 8 update. I continue to get the message of user name or password for my email are incorrect.

    Did you try to delete the mail account, restart the phone and add the mail account again?
    iOS: Setting up an email account
    This article provides morse tips, if you can't connect or you receive an error in Mail.

  • I run DeviceDemo sample to send email, when click send email button after f

    I run DeviceDemo sample to send email, when click send email button after filling all fields, it took me to EverNote application, can not send email. does anyone has this kind experience? how to fix it?

    Hi,
    ADF Mobile cannot directly send emails as this is a security precaution of your mobile phone (imagine all applications could send mails without you confirming). Instead the send mail functionality launches the mail client you have configured and fill in the information you provided in the application. The mail function by the way is implemented through Cordova.
    Frank

Maybe you are looking for