Email for process message failure in CO54

Hi
Does anyone know if it is possible to send auto generated emails for process message terminations in tcode CO54?
Regards
Werner

Hi Rohit,
You can maintain the email ids in following two reports for any queue blockage in outbound and inbound queue -
/SAPAPO/RCIFQUEUECHECK - For Outbound queue Faiure
/SAPAPO/RCIFINQUEUECHECK - Sends notifications in the event of inboundCIF errors
Here you can specify the -
1. CIF name/initials like CF*
2. Name/Distribution List to which mails should be triggered
3. Target system name
4. Other settings as needed
Moreover, you can schedule these reports as periodic background jobs scheduled to run every 30 minutes/1hour as per business requirement.
This will send emails whenever any queu failure occurs.
Hope it helps you.
Regards,
Alok

Similar Messages

How to Send Emails for failed messages without using Alert

Hi Experts,
In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
Please let me know the below :
1. Is this really possible to avoid Alert?
2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs.
Thanks,
Nabendu.

Hi Nabendu,
If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
So for message validation only you can send mails not for message failures.
thanks,
madhu

Error in 'eMail Response - Process Message' --- Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(

Hi,
When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
I increased the log level to 5 and got the below message in log file
ObjMgrBusServiceLog InvokeMethod 4 0000000251b51f04:0 2013-06-10 01:30:12 Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
ObjMgrBusServiceLog Error 1 0000000251b51f04:0 2013-06-10 01:30:12 (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
Can any body help me out in this regard.
Thanks in advance..
Jagadeesh

Hi Naresh,
yes, I am using the delete polling strategy. Here is the .jca file:
<adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
<endpoint-activation portType="Pozadavky_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="Pozadavky.Pozadavky"/>
<property name="QueryName" value="PozadavkySelect"/>
<property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
<property name="PollingStrategy" value="DeletePollingStrategy"/>
<property name="PollingInterval" value="120"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>

BODS 3.1 :SMTP configuration to send email for success or failure of job

Hi.
This is further to this post : http://forums.sdn.sap.com/thread.jspa?threadID=1965129&tstart=0
Thanks to all for the help.
I did not find a complete set of information as things to do (for a person who is new to BODS).
Hence sharing the workflow which works for me when tested on a simple workflow :
Pre-requisite : SMTP service to be made available on the BODS server and port 25 to be opened up.
This is done by the IT dept of the company.
When smtp service is activated and port 25 is opened up, telnet IP address 25 should say, service is available.
Suggestion : create a email group like : bods at company.com which can be used to be used for the BODS JOBs. Which does not prompt for a password. This also is done by the IT dept of the company.
1) On the BODS server :
1) Click open Data Services Server Manager
2) SMTP settings for smtp_to functions :
Add the IP Address of the SMTP server
Add the email address of the sender. Eg. bodsjobs at companyname,com
3)Apply/Restart the server.
2) Login to BODS Designer :
Create a test job :
TRY ==>DF===> Script for success ===> CATCH script for failure
In the script for success : add the following :
print (' IN TRY BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', ' SUCCESS OF JOB : '
|| job_name(),'Job completed successfully ', 0, 0);
print('After Email ');
In the script for Catch add the following :
print (' IN CATCH BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', 'FAILURE OF JOB : '
|| job_name(),
error_number( ) || 'Error message: ' || error_message( ) ||
'check details', 50, 50);
print('After Email ');
Note : In the catch : select all exceptions on the check box.
Save all.
Click on the job and say execute.
The job will run and if it is successful. You will receive the succes mail.
If there is any error in the DF before the catch, you will receive a mail, which says failure.
The above workflow, when tested atleast works for me.
Hope this helps.
Regards
indu

Hi Arun.
Am really not aware as to how to make things work from the console.
I work on windows environment both at client and on the server.
It looks like you got a bit confused on suggestion of a email group account.
I never did anything on outlook configuration for activation of smtp for bods.
I think you should not mess with outlook.
I dont know from the client side how things work.
But i have worked directly on the BODS server where the bods installation was done.
It is relatively very simple to do and to test.
But to even test why you get that error.
All you need is just a email id. Which could be yours ???
Put your email id as the source of email in that box in the job server.
And put only your email id in smtp_to and test it.
Run a test job. If it completes successfully. You will receive a mail.
In the catch, if you have checked all the boxes for error capture,
if the job fails, it would throw a dump of the errors in the email.
Once everything works well and you receive emails for any jobs you are running.
Then you could decide for the source of your email id and for the receipients of your emails of the jobs.
You could put a group id of your team as source. And also in smtp_to script in case you want everyone to receive the alert that the job has been done or it has errors.
Or include only those email ids in the smtp_to whom you feel, should receive the mail.
Hope this idea helps.
Please dont mess with outlook for any smtp activation for bods.
It is not required if you are working on a windows environment.
You just need a email id for testing.
Outlook configuration does not come into picture at all.
if there is any other unix environment involved. I have no idea.
And i really do not know how things would be from a client side to configure.
Server configurations i do from the server.
I did all configurations on the main server machine. Not from the client.
And I have only one job server so i did everything there.
I did not do anything from management console.
I use management console only for monitoring of jobs on a daily basis, the dashboard which gives you details of the data pulled, time taken etc etc.
cheers
indu.
Edited by: Indumathy Narayanan on Oct 22, 2011 8:05 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:09 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:17 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:18 AM

Emails for process chains

Hi Friends,
I need your valuable suggestions for a problem we are currently facing regarding emails in process chains.
An explanation of the issue is as follows:
The users who load data (present at different geographical locations Ex. A, B, C) use a custom ABAP program to load and this program only triggers the process chain. The final status of the load is to be communicated back to the users.
If the email feature of process chain is used and the users list from locations A, B and C is maintained, then users from B and C get emails regarding loads abt C and so on. In other words users from A, B and C have irrelevant emails in their mailbox.
Also the users have no technical knowledge of BW and hence cannot interpret the Process chain log. So there is another technical team which will receive the detailed email messages.
All the users need to know is whether the load was successful or not.
---Accessing the Monitor using RSMON is not an option
---Maintaining email groups is not an option.
Has anyone faced a similar problem before? If so, how did you resolve it?

You have now 1 chain that is triggered by A, B and C and they all get e-mail when the chain is finished?
Create 3 meta-chains C1, C2 and C3. Users A, B and C trigger their respective chain. The actual chain that is doing the work is C4. C4 is a subchain of C1, C2 and C3 so you need to model it only once. At the end of C1, C2 and C3 you can send email to your users.
C1
- C1 trigger
- C4
- C1 finish & email A
C2
- C2 trigger
- C4
- C2 finish & email B
C3
- C3 trigger
- C4
- C3 finish & email C
You could optionally connect the technical e-mail to the last process in C4. and the user e-mail to C1, C2 and C3.

Notification by email about Process chains failure

Hi,
I scheduled a process chain to run once every hour and sometimes it fails for knowing problem.
I would like to get an email every time it fails.
Could someone guide me how to get a document which gives the steps to follow or provide me a step by step for this.
Thanks,

Hi Mohamed,
You can create messages for a process that are trigerred either when the process failes, or succeeds, by right clicking on a process and choosing Create Message.
Please also check the following:
Re: Sending email from process chain not working
Hope this helps...

Grid control notification cannot send email for alert message.

We have grid control work fine in sending out email. But we cannot receive it lately. I followed the note 285093.1 for trouble shooting. I found that in the file <OMS HOME>/sysman/log/emoms.log or emoms.trc of the following repeated error:
========================================================
2009-03-04 16:29:40,605 [DeliveryThread-EMAIL3] ERROR threadPoolManager.WorkerThread run.281 - Exception message: null
java.lang.NullPointerException
2009-03-04 16:29:41,097 [DeliveryThread-EMAIL6] ERROR em.notification run.595 - Delivery.run: java.sql.SQLException: ORA-01017: inva
lid username/password; logon denied
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:276)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
==========================================================
I am wondering which login of what user has the logon problem. How can I fix it?
Thanks for any help!

Yes, I did that in following up the metalink note 285093.1 and 356774.1. There is not broken job in the repository database for sysman. There was one before. Then I checked the emoms.trc file and saw the error ORA-01017: invalid username/password; logon denied.
I think the problem is likely due this error, as so far I did not see any other error. On grid control, I also did repository operation => notification check and the email sending test. They are all fine without any error.
Thanks.

How can I update vendor fax/phone/email for output message determination?

Hello all,
I have updated vendor master record with a new fax number. But the problem is, I am still getting the old fax number in Purchase order, output message.
Is there any other change I need to make the correct new fax number in PO out put message?
Earlier I was able to send PO correctly to the old fax number.
What are the steps to update vendor fax number so it can correctly populate in PO output message medium detrmination and sent out to correct fax number?
Regards

Hi,
Hope you have created the PO document after making the changes in the vendor master.
Also check your output condition records for the application EF in t.code - NACE, whether you have maintained the old fax number, since this will have precedence over the vendor master record data.
Thanks,

Process message

Hi All,
I have one query
Tthe configuration of process managemnet is cmplted
I created and released and confrmd an order
Then i have send the control recipe destination (CO54)
once i open the PI sheet (CO58)
The charactrstics appear which we give in SPRO but now my querry is for example for charactrestics 'PPPI_STOCK_TYPE'
there are values for this characterstics like unresticted,block,quality inspeciton.
But in CO58 i cld nt get the drop down what setting or what need to be done to get a drop down since operator need to sleect frm the drop down in CO58
Thanks in advance
Regards,
Sravanthi
Edited by: Sravanthi683 on Jan 29, 2010 4:36 PM

Hi,
if you create an input field based on that characteristics you should get a dropdown. Do you mind posting the instruction so that everybody can see what you are talking about?
Additionally I am confused by the transactions you mention:
CO54 is not for control recipes but for process messages
CO58 is not usable for browser-based PI sheet. Are you referring to a browserbased PI Sheet or the old ABAP PI Sheet?
Regards,
Arne

TS4268 My phone uses my email for iMessage but not my phone number, how do I get that to use my phone number and not my email?

I can't figure out how to use my phone number and not my email for iMessage

Settings>messages>Send & Receive> Start New Conversations From and select your phone number.

Alert Message for Scehuled messages

Hello,
Can we get alert email for scheduled messages in Integration Engine? If yes how to get that?
Regards,
Ansar.

HIIII
Go through these blog ..
Configuring scenario specific E-mail alerts in XI-CCMS: Part - 1
The specified item was not found.
CCMS ALERTS
XI : Configuring CCMS Monitoring for XI- Part I
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
Alerts
My blog
transaction handling in XI
The specified item was not found.
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox

How to delete subscription of email for Nokia Mess...

I want to delete my email for Nokia Messaging. I dont want to be subscribed anymore.
PLS Help me
** Love Me **

http://www.google.ie/url?sa=t&source=web&cd=1&ved=0CBMQFjAA&url=http%3A%2F%2Femail.nokia.com%2Faccou...
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Send email automatically when a process message errors out in CO54.

Hi,
I am looking for a standard method to send an email to the user when a process message errors out in CO54.
Is there anyway to do it in standard SAP system? Please let me know.
Thanks!

did you enable the email notification on the issue list...... List Settings -> Advance
Settings option.
check this, step by step guide.
http://ceekam.com/blog/?p=1137
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

The problem was solved by Apple Technical Help. The process is as flollows:
1. Open Safari
2. Menu item Safari-Reset Safari - remove all website data - reset
3. Now if you try to login on iTunes connect it will work.

IBaseMessage.Context getting disposed for large message processing (There was a failure executing the receive pipeline: Reason: Cannot access a disposed object. Object name: 'MessageContext'.

Hi,
I am trying to parse a large message (2.7 MB file) in a custom Flat file Disassembler (inherited from the Microsoft.BizTalk.Component.FFDasmComp) this does exactly the same work for FFDasmComp but also promotes the count of disassembled messsages. This
works fine for small messages but for large messages I get this error
There was a failure executing the receive pipeline: "<pipeline name>, <Pipeline assembly>" Source: "Custom FlatFile Disassembler" Receive Port: "ReceivePort7" URI: "<the input file location>" Reason: Cannot access a disposed object.
Object name: 'MessageContext'.
In the event log
what I am doing inside the custom flat file assembly is, I am saving all the disassembled messages in a List<IBaseMessage> and then finally when GetNext() method returns null I am promoting the nRecordCount in the messageContext of all the disassembled
messages. This is where I get the error when trying to promote to the message context.(Cannot access a disposed object, Object name: 'MessageContext'). I think the messagecontext is getting disposed, but it should not as I still hold its reference in
the List<IBaseMEssage);
private long nRecordCount = 0;
private List<IBaseMessage> oDisassembledMessages = new List<IBaseMessage>();
Any idea why this happens ?
Thanks in advance, PLEASE HELP
Surya

Hi Surya,
Are you still facing this issue? and are you using Flat File Disassembler in your Receive pipeline?
If yes then set 'RecoverableInterchangeProcessing' to True.
Please have a look in below articles-
BizTalk
Pipeline - Flat File Disassembler Cannot Access a Disposed Object 'DataReader'
biztalk-esb-toolkitflat-file-debatching
BizTalk
Server: List of Errors and Warnings, Causes, and Solutions
This issue can also occur if you are using Large Size message, in this case you will have to optimize your code.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Email for process message failure in CO54

Similar Messages

Maybe you are looking for