Email multiple email addresses for one contact within Group email

I have a contact card within a Group that has 2 email addresses. When sending out mass emails I want to send it out to both of the addresses for that one contact card; however, when I put the persons name in the address bar in mail, it only defaults to one of them. How can I fix this without creating multiple contact cards for the same person? Thanks for your help!!!

Hi, I'm not positive, but I don't think you can.
I'd maybe keep a little text snippet of the 2 email addies to copy/paste in the TO: feild, or the BCC: feild is better.

Similar Messages

Multiple addresses for one contact in a Group

I need to add a work address and a home address for ONE contact in my address book to a group. How can I do this without expanding the group and manually adding the other address? I don't want to have to expand the group. Thanks for any assistance.

Rather than dragging the card in from the Address Book, start typing the person's name. Mail will give you a pop-up menu on choices. Pick one. Then repeat and pick the other. This is less convenient if you want to put someone in a group and send to both addresses in the group... in that case, V.K.'s solution is the best you'll do.

How do I enter multiple telephone numbers for one contact?

When I try to add numbers to a contact I only seem to have 'mobile' or 'iphone' as categories - I want to add 'home', 'work' etc. How do I do this?

Tap on the category name and change it

Adding multiple email address for same contact to mail group

Is it possible (in Apple Mail) to add a second email (work) address for a contact to an email group, how?

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

How to make a distribution list that includes all email addresses for each contact?

Is it possible to create a distribution list that allows you to select all possible email addresses for each contact within a group? I am running into the problem that I can only select one email address for each contact, but need multiple. How can this email list be generated using the Contacts app and Mail?

You can't with the way it currently works.
I've never tried, but you might try multiple groups, each with a different email selected.
I think I created an Applescript that would grab every address of every selected person and address an email. It is probably buried in the bowels of these forums.

Address Book/Mail: sending to two addresses from one contact in a group

I would like to send an e-mail to two addresses from address book, but it is only one contact/family name. It seems it only lets you pick one for a group. Does anyone know how to pick multiple e-mail address for one contact name/family in a group so I don't have to manually look up each name?
Thank you!

Rather than dragging the card in from the Address Book, start typing the person's name. Mail will give you a pop-up menu on choices. Pick one. Then repeat and pick the other. This is less convenient if you want to put someone in a group and send to both addresses in the group... in that case, V.K.'s solution is the best you'll do.

I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my contacts instead of the addresses stored in my comcast account. How can I get rid of the Facebook email addresses? The

I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my contacts instead of the addresses stored in my comcast account. How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app. I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity). I wish I could start over!!! thanks.
iPad

I could be wrong, but it sounds like Facebook imported to your contacts. I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there. When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies. You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though. Good luck!

How can I put a list of ten email addresses into one contact file?

I have a lst of ten + people that I want to put into my address book under one disignated.
Whjat is the easier way to accomplish that task?
I do not see anything in the Menu bar that addresses this.
Thanks.
Doug Wise

Doug,
It sounds like you want to create a Group.
Each of your 10 people should be entered with their own Card in Address Book.
Then you'll create a Group which you'll then add the 10 contacts to.
Once that's set up, in Mail you can enter the name of the Group in the To field to easily send a message to all group members.
So rather than putting 10 email addresses into one Contact, you'll be putting 10 Contacts into 1 Group.
Matt

Need second email address for a contact

I need the ability to add a second email address for a contact. I have tried using ";" and "," characters in the email address line, but get an invalid data format error when saving. Short of adding a custom field, is there any way to do this?
Neil

Neil, I believe your only option is adding a custom field.

Never recvd verification code, in PHOTOMAIL dialog box it is asking for one when trying to email pictures,never saw any codes when setting this up

verification code, never received it when setting up contacts to email pictures, in PHOTOMAIL dialog box it is asking for one to verify my email address and said it was sent to my email, went back and checked and there wasn't anything there, where is it or what do I need to do now????

Does the account you are using have admin rights? I found this :
http://support.apple.com/kb/HT2397
+In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
Sounds like it might be worth a try from an admin account first.

Incorrect email address for my HP ePrint Center email account

downloaded HP ePrint for my blackberry and my email address for my HP ePrint Center email account is wrong, need to change

Hi pjbodor1,
I can definitely understand why that would be so frustrating. It can be a bit confusing as to which email you need at different points.
The email address you need to enter into the activation screen on the HP ePrint app, on any device (Android, Apple, Blackberry) is your personal email address. You will receive an email from HP ePrint with the pin code that you need to activate your app. Please remember that each app needs to be activated individually, therefore if you have multiple devices with the HP ePrint app installed, you will need multiple pin codes. The easiest way I found not to get them mixed up is to activate each device/app one at a time. Once the app has been successfully activated on the device, delete the pin code email and move onto the next device.
For reference I have included 2 documents. The first is getting started with HP ePrint mobile apps and the second one is dedicated to FAQ's for HP ePrint mobile apps.
Getting Started with HP ePrint Mobile Apps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01616126
HP ePrint Mobile App FAQs
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Running OSX10.6.8 two email account thru Roadrunner. Both accounts now indicate email sent but they never arrive. Can get inbound email. this start for one account 5 days ago and yesterday for the second account. any suggestions?

Running OSX10.6.8 two email account thru Roadrunner. Both accounts now indicate email sent but they never arrive. Can get inbound email. this started for one account 5 days ago and yesterday for the second account. any suggestions?

When we returned from a weekend trip, both emails were working. The obvious answer [to me anyway] is that the problem was with Roadrunner, not our minimac. The chances of finding out what the problem was with Roadrunner are slim and none.

Multiple Lease Duration for one DHCP Scope?

Hi All,
I have an urgent question. I wanted to know if it is possible to have many lease durations for different computer groups getting their addresses from one DHCP scope. I saw somewhere that it is possible to use User Classs or Vendor Classes for setting a lease
duration for a group of computers sharing the same class Id ?
If it is true, How can to configure ?
Also i would like to know about the lease duration period what is the maximum days can we have ( 8 days After )?
Thanks
Atul

Please refer to the following-
http://social.technet.microsoft.com/Forums/windowsserver/en-US/26de79f9-6ad7-4088-9077-006b9dd8c1fb/multiple-lease-durations-for-one-dhcp-scope?forum=winserveripamdhcpdns
You can configure any value as lease duration; however if you want a very big/infinite value; it makes sense to convert the lease(s) to a reservation.

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

Multiple free goods for one item in standalone CRM

Hi Gurus,
We are trying to implement multiple free goods for one item in standalone CRM.
As per SAP.help.com, it says that we can configure multiple free goods scenario in standalone CRM system.
We tried to set up this in our system. Basically we want to implement the scenario, where a user wants to purchase item A, he should get a prompt for choosing between two free goods B and C.
We did the relevant IMG settings required for Free goods at IMG ->CRM -> Basic Functions -> Free Goods.-> Set up Free Goods
We also did the relevant item category determination where we have made an entry with
Item Usage = " Free Goods" , Main item cat. = "TAN' , Item Category = "TANN".
Now we went to create condition records in the path "SAP Menu -> Master Data -> Prices and Conditions -> SAPCND/GCM - Maintain condition"
We chose Application ="PRT", MaintenanceGrp="PRT_FGOODS", Maintenance context ="GCM"
Then while creating conditon records , when I try to create two condition records where the Main Product is same but free good product is different, the system is not allowing to save these two condition records.
it is giving error "Overlapping validity periods for two condition records".
Please advice, if i am missing something. Thanks in advance for your help.
thanks,
Randhir
Edited by: Randhir Soni on Feb 8, 2010 8:12 AM

Constraints in free goods in R3 taken from SAP library
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
This answers your qn Not possible in R3
If you are on Retail scenario this is possible thro bonus buy schemes
But a lot of customizations needs to be done and you need a retail server to do that
Regards
Raja

Email multiple email addresses for one contact within Group email

Similar Messages

Maybe you are looking for