Embedd excel in browser, use excel interface for inputing values.

Embed excel sheet in browser and give application same functionality as excel sheet gives. We can use the excel sheet for input and able to update the values in database.
Please provides the solution as how to do it. Is there any reply...........

you can use applet to do this work.
Jxcell spreadsheet somponent is a excel compatible spreadsheet.
It can be embed in java applet.support cell format,formula,pic,chart etc,
all these can exchange with Excel.
http://www.jxcell.net

Similar Messages

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

How to get default input values when using promt user for input

I use "promt user for input" to input some values. The messageboard appears with blank boxes then I will input new values. I want to make some default values in this blank boxes so that I needn't to enter new values. Is it possible ?

Right click on he Express Vi terminal and choose open Front panel to convert it into a standard vi. Then open it. Enter a default value for each control, then right-click on the controls and go to data operation > make current value default.
Message Edité par chilly charly le 11-18-2007 12:52 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to use multiple Interfaces for the same BS?

Hi @ ,
Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
Any help will be highly rewarded
Regards

Hi-
Yes it is possible you can use multimapping for mapping the interfaces.
To know more about multimapping see
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
Some more helpful links
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Using local interfaces for EJB (session bean)

Hi,
I�ve a question regarding when to use the Local interfaces(EJBLocal and EJBLocalHome) of a enterprise bean. I understand that calls to enterprise bean can be made locally if the client which is invoking is in the same JVM as that of EJB. I�ve written a web client (servlet) which is packaged in a EAR and this servlet is trying to invoke a session bean which is in a �different� EAR using local interfaces. Both the EARs have been deployed in a single server (websphere 6.0 server). It didn�t work for me this way�..If I package the servlet in the same EAR of session bean then it works fine.
So is this to say that both EARs are not running on the same JVM? Or should it work even if the client and the session bean are in different EARs but in same server?
Can anyone explain me the fundamentals behind this.
Thanks in advance

Local access is only portable within the same .ear. For example, the Java EE SDK and SUN's
application servers have never supported local EJB access from a web/EJB component in a different
.ear. One issue is that local access requires that both the caller and target EJB have the same
classloader. By definition, different Java EE applications have distinct classloaders. In addition,
in Java EE 5 persistence context propagation does not span applications, so it wouldn't work in the
local case.
--ken

Is it recommended that i use an interface for logic 9, if so what brand

waht kind of interface should i get that is relatively cheap and does a good job, is it recommended that even use an interface, i have electric guitars, and a keyboard, and a mic.

If its not an entirely different situation with regard to Logic Pro 8/Logic Pro 9, Apogee makes a few interface options at different price ranges. The Duet is a quality interface as their mid range price option. I have had experience running Logic sessions with the Duet and have had relatively few problems. Also, Apogee typically does a good job integrating their specs/design for Logic users.

Using table rows for input

Hi,
Is it possible to use rows of table for input? Table binded to a RFC model table parameter. The rows of table is looking readonly.
Best regards,
Altug Bayram

Hi,
Did u check if the attributes set to read only. ?
What is the cardinality of the node.
And when it is a input for the RFC , i think you have missed the createElement part...!
P.S : It will be gain more attention when it is a seperate question.
Regards
Bharathwaj
Message was edited by: Bharathwaj R

Using Logic sounds for input and playback in Sibeius

Hi. I've been running Sibelius and Logic on different PC's, and just for fun, I installed Sibelius on my Mac today. I used my Master Keyboard to play in a test song.
So now I'm wondering whether I can use Logic sounds for inputtting AND for playback. Since I also have VSL on the mac, I don't really want to install the GPO which I use on my Pc with Sibelius.
Thanks, Kay.

Have you think using IAC ? I.e you set it as a "Midi Out" port in Sibelius so the midi will carry the data to Logic and trigger its Instruments via the virtual midi cables ( the IAC bus ).
Take care to select Software Instruments tracks only. If you select some track which use say Multi, Standard or Mapped Insr. ( which port is set to IAC by chance ) you will cause midi feedback and crash the Logic app.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]

Any other procedure for inputing values

hi everybody,
how to input values via screens in to database other than BDC procedure?
how to print values of basic list which r get stored in hide command in next secondary list?

Hi,
Raja
welcome to community,
other than BDC u can use session method or Direct Input method to insert values into database
u can retrive directly the values tht r stored by using tht HIDE command
u can write loop at and u can retrive tht values
if helpfull please reward
feel free to ask any quiries
my mail id is [email protected]

I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects. I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

I am using logic to record a podcast. I have a presonus firestudio mobile for my interface so I can record several people at the same time. I'm also using Soundboard for a playback system for music and sound effects. I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast. Does anyone know how to do this? and if so can you tell me how to do it? Thanks.

Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

GLPLUP: Excel-Upload for plan values in the special ledger

Hello,
got a problem with the upload function of plan values for special ledger.
I got the file in the right format, defined via transaction GLPLADM, but when i want to load that file, the values are not in the system. the system message displays the the file upload was OK, but there are no protocols and no data in the systems.
Any ideas, why it is not working?
Regards
Florian

Hi,
I did this in Cost Center Planning and it worked once i activated integrated planning and saved a template etc at the layout and on the desktop.
Below link has a detailed process of setting up excel integration.
http://help.sap.com/saphelp_46c/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Pls provide points if usefull.
Thanks,
Praveen

Reg: Using GP interface for webdynpro

Hi,
I do not have the GP DC that i need to add as dependency to develop Webdynpro (GP interface). How can i solve this?

If you know the DC name, then you may ask the Basis to download it for you from service market place. Please do tel him your WAS version.
Regards
Kapil

Using external interface for ejbs in WLWS 8.1

(Weblogic 8.1 / Workshop)
Hi there,
I need to create a session ejb within workshop, implementing externaly defined interface. How can this be done?
greetings
Heiner

Hi,
I am having same problem. Did you find any solution?.
Thank You.

How to use FM VIEW_MAINTENANCE_NO_DIALOG for updating values in views

Hi all,
I got a scenario to update the maintainenace view V_T001S based on the user inputs through a program.
I'm thinking to use this FM VIEW_MAINTENANCE_NO_DIALOG , but im getting lot of errors.
Please let me know if you have any other solutions for this scenario.
Thanks in Advance.
Best regards,
Sekhar.
Resolved.. thanks
Edited by: Chandrasekhar Raju on Mar 29, 2011 6:55 AM

Hi,
you could use Dynamic SQL /Execute immediate to run DDL from a stored procedure.
http://download-uk.oracle.com/docs/cd/B10501_01/appdev.920/a96624/11_dynam.htm
Could you please tell why do you want to create a materialized view in stored procedure ?
How frequently you will runt this procedure . It would is better to create a MV once and use it.
thanks

Can I use a inputHidden for javascript values that doesn't set the value?

I have a hiddenInput field for each row in a datatable so I can restore default values to a date field with a javascript function. I am getting conversion errors because I don't have the right setters in the backing object - and I really don't want to put them there - but I don't want the tag to set the values! Is there any way to just set a hidden value somewhere for each row of a datatable but not have it try to set the value? Thanks in advance!

I just realised that won't work because all the HTML tags will have the same name, whereas I need the dynamically generated suffix that a dataTable assigns to every element in the row i.e. '_id34', so I can reference the value in the javascript and compare it to entered values. Any more ideas? I am having huge memory problems when I'm submitting my form too, using up 2GB of mem and then dying! I'm not sure what's causing it, because it doesn't get as far as my action method code before it dies! It works for smaller tables but I need to be able to handle ~20 users with tables 4x the size I can process now without running out of memory :( Any help would be really really appreciated!!

Embedd excel in browser, use excel interface for inputing values.

Similar Messages

Maybe you are looking for