How to set a fixed size for the browser window on startup?

so the browser window has the same size and location on the desktop every time i open a new window???

In a 2D coordinate system the horizontal values are represented by some letter, usually x. In the same coordinate system the vertical values are classically represented by y.
Note: In your code, if you wish, you can replace x and y with anything you desire--p and q or perhaps jeff and alice or any variable name you wish, but for simplicity, and usually ease of understanding because almost everyone has had 100's of math problems drilled into their head with (x, y), x and y are used as convention.
In Java the screen coordinates run from 0 to the width-1 for x and 0 to height-1 for y of the component you are using to display.
So logically when you have a value of x or y that goes beyond the addressable bounds of your display, then you have to make some type of adjustment--when your value dips below 0, you reset it to 0, when your value goes above what ever width-1 or height-1 then you have to set that value to width-1 or height-1.
This all assumes that when you hit the wall, floor, or ceiling you stick there until you change directions--if you wish to wrap then you set your value to the opposite bound--so if you go below 0, you would then pop out back in on the right side--your appropriate x would be set to width-1 instead of 0 and in the case of y going below 0 your y would be set to height-1. This is also to say that when you descend below your minimum, then you would pop back out on the opposite side you went out on--so x greater then width-1 would get set to 0 and y greater than height-1 would get set to 0.
That is not even a start on if you want to include elastic collisions, angle of impact, any type of deceleration force, or anything else.
In any case... I would recommend that you add more math to your studies, I've never met an engineer or computer science grad that said: "Wow, I really regret taking all that math in college (or HS), I never use it."

Similar Messages

How to set a fixed width for a box

Hi there,
Struggling here.... must admit.
I need a solution whereby I can set a fixed width for a box that is grouping two buttons. I suppose generally, I want to know how to set a fixed width for anything element.
See the picture below. I want the two buttons to stay the same distance apart, and I want the grouped buttons to stay the same distance from the right edge of the window, even as a user resizes the window.
This is what happens when you reduce the size of the window .....
I would like to stop this from happening.
I can't figure out how accomplish keeping the parent div a fixed width, and a fixed position from the right side of the window, so the buttons won't overlap.
Perhaps I'm doing the whole thing wrong.
I mean, is there a way to accomplish this without grouping the buttons? That is, make the buttons fixed width, fixed distance apart from each other, and fixed distance from the right side of the window, even as the user resizes the page?
I am trying to accomplish this using the Min/Max width settings, but given that there are so many different units to choose from, and the fact that when I place a button or box on the screen, it seems to be creating that button or box with a percentage-based width, I don't know how many pixels to set it to.... sigh....
Many thanks in advance for your help.
Sam

Okay after much futzing I figured out at least part of the solution I need, but if someone knows of a more efficent way to do this please let me know.
I set a fixed minimum width in pixels for both of the buttons at 156px.
I then made the left button float left and the right button float right.
I then made the parent div for the buttons float right.
That made the buttons stay the same size.
The only thing I need to figure out how to do now is make the parent div stay a consistent distance in pixels from the right. I tried setting a right margin but that didn't work. As you size the window down, the div gets closer to the edge, until it passes it.

Set global font size for the whole application.

Is there a way of setting a font globally
What I mean I want to set a font size for the whole application.
Is this posable ??
Thanks Craig

After posting over 300 questions I would think you would be passed the "New to Java TechnologY" stage.
The answer for Swing applications is yes this can be done.
I don't know how to do it for AWT components.
Since you posted the question in this forum (as oppose to the Swing forum for Swing related problems), I'm assuming this is an AWT related question and therefore I can't help you.

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

How do I stop text from resizing to the size of the browser window

Hello there,
I am using a DW CS3 template that has a sidebar div and a
main content div - the text in the main content div keeps resizing
to the size of the browser window - I don't want the text to resize
if I make the browser window smaller - I want it to remain the
same. I am trying to float the text right and input a width but
this is not working for me. What am I doing wrong?
HELP!
Many thanks!

>>What am I doing wrong?
Not giving us a link to the uploaded page so we can see the
page, how it
behaves and the actual code.
Until we see that you are unlikely to get a definitive
answer. The problem
is unlikely as you state it because text itself is never
dependant on the
browser viewport size.
Walt
"Fun Leprechaun" <[email protected]> wrote
in message
news:g9f7rq$ie4$[email protected]..
> Hello there,
>
> I am using a DW CS3 template that has a sidebar div and
a main content
> div -
> the text in the main content div keeps resizing to the
size of the browser
> window - I don't want the text to resize if I make the
browser window
> smaller -
> I want it to remain the same. I am trying to float the
text right and
> input a
> width but this is not working for me. What am I doing
wrong?
>
> HELP!
>
> Many thanks!
>

Can you change the design to adjust with the size of the browser window?

I am creating my first site in iWeb, and would like the image in the background to adjust as someone adjusts the size of their browser window. In other words, no matter what size their window is, the entire page fits. I would like it to accomodate small to large computers and windows without them having to scroll up/down or sideways.
Any ideas on how to do that?
Thanks!

Thanks Wyodor,
I apologize, but apparently I typed "background" image instead of just an image. I have an image on the page that I would like to size to do the same thing. There are layered images on top of it, and I need those images to remain in the same place because they are hyperlinked images that take them to another page. I have attached a photo of what it looks like here.
The agree and disagree buttons are the hyperlinks, and I want them to stay static with the image underneath them. I know that if I put the larger green image as a background image, to have it dynamic, the agree and disagree buttons would not stay in the correct spot when the browser size is adjusted. Thus, it brings me back to my question (but phrased correctly this time)... is there a way to have the entire site, images and all, be dynamic with the size of the browser? No matter what the size of the browser window, I would like the whole page to show so the hyperlink images stay with the image they are on top of.
Thanks!

How to set a backgound pic for the panel

I use a JTable as a member of a JPanel Object, and I want to set a backgound pic for the panel ,How to?

Hello,
import java.awt.*;
import javax.swing.*;
public class ImageTest extends JFrame
     public static void main(String[] args)
          new ImageTest();
     public ImageTest()
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          MainPanel pan = new MainPanel();
          pan.add(new JTable(6, 3));
          getContentPane().add(pan);
          pack();
          setVisible(true);
     class MainPanel extends JPanel
          private Toolkit tool = Toolkit.getDefaultToolkit();
          private MediaTracker media = new MediaTracker(this);
          private Image background = tool.getImage(yourImage);
          MainPanel()
               super();
               media.addImage(background, 0);
               try
               {     //wait to calcute sizes correctly
                    media.waitForID(0);
               }catch (InterruptedException e){}
          public void paintComponent(Graphics g)
               super.paintComponent(g);
               g.drawImage(background, this.getX(), this.getY(), this);
          public Dimension getPreferredSize()
               return new Dimension(background.getWidth(this), background.getHeight(this));
}regards,
Tim

How to reduce the size of the browser window

My firefox browser window is a full screen view. My monitor is a 24" flat-screen. When I first downloaded firefox the browser window was half the size it is now. How can I re-size the browser window back to the way it was? I think I clicked the full screen button in the top right hand corner - not sure; but now I can't reduce the browser window back to half size so I can see the rest of my desktop. Help!

If you run Firefox in full screen mode then press F11 or Fn + F11 to toggle (Mac: command+Shift+F).
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.

How can you stop slideshow from resizing the browser window iframe ?

Does anyone know where the code is that causes the iweb slideshow to resize the browser window when it is opened?
When it is placed on a page using <iframe src="http://homepage.mac.com/coreydee/slideshow/index.html" width="760" height="580" scrolling="no" style="border:none;" frameborder="0"></iframe> It resizes the browser window when it starts.

Does anyone know where the code is that causes the
iweb slideshow to resize the browser window when it
is opened?
When it is placed on a page using <iframe
src="http://homepage.mac.com/coreydee/slideshow/index.
html" width="760" height="580" scrolling="no"
style="border:none;" frameborder="0"></iframe> It
resizes the browser window when it starts.
The iWeb .Mac slideshow, which you previously tried to add in an iframe, does have a function to resize the window. But it would not cause the whole window to resize, just page within the iframe so you would never know.
However, the autoviewer one you are using should not do this.

How do I set a fixed size for a window (frame) :P

hello!
Was wondering if I can set fix dimensions (size) for a window(frame) in Java.
Background: I have a menu and when I click on one of the options a window opens but I hate the fact that I can enlarge it...wish it would be fixed sized and have scroll instead... :P
any ideas?
many thanks!
Cristina

sorry for not using the swing forum but i considered java programming forum as more or less enclosing all problems Do you understand how to use forums? First you should be searching the forums to see if you questions has been asked and answered before. (Very few questions posted in the forums are original). It makes sense to search the forum where the questions should have been posted in the first place.
For example, if you had searched the Swing forum using "fixed size jframe" you would have found this posting at the top of the search results:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=712407
So you would have had your question answered in less than a minute and we wouldn't have wasted time answering a question that has already been answered.
A win-win situtation for everybody.

How to set a fixed size window, so that moving 2D pictures wouldnt go off?

Hi
I dont if this question has been asked or no & also not sure if its right to be posted here as my problem is a java 2D graphics problem in swing environment.
I want to know is how can i set the window to a fixed size with boundaries such that my graphics 2D picture in the swing window will not go off the edges of window when i do some transformations with the 2D picture.
For e.g:
so far ive got a frame window of size 350 by 350 with my 2D picture inside it made up of shapes etc...
when i apply some transformation to it (moving it) for a distance it goes disappeared off window beyond 350 and will come back if i move it back.
So how do i restrict the window so that when picture reaches the edge, it will not be able to move any further?
Do i set some specific bounds to the JFrame?
i hope i've explained it properly
Thanks

In a 2D coordinate system the horizontal values are represented by some letter, usually x. In the same coordinate system the vertical values are classically represented by y.
Note: In your code, if you wish, you can replace x and y with anything you desire--p and q or perhaps jeff and alice or any variable name you wish, but for simplicity, and usually ease of understanding because almost everyone has had 100's of math problems drilled into their head with (x, y), x and y are used as convention.
In Java the screen coordinates run from 0 to the width-1 for x and 0 to height-1 for y of the component you are using to display.
So logically when you have a value of x or y that goes beyond the addressable bounds of your display, then you have to make some type of adjustment--when your value dips below 0, you reset it to 0, when your value goes above what ever width-1 or height-1 then you have to set that value to width-1 or height-1.
This all assumes that when you hit the wall, floor, or ceiling you stick there until you change directions--if you wish to wrap then you set your value to the opposite bound--so if you go below 0, you would then pop out back in on the right side--your appropriate x would be set to width-1 instead of 0 and in the case of y going below 0 your y would be set to height-1. This is also to say that when you descend below your minimum, then you would pop back out on the opposite side you went out on--so x greater then width-1 would get set to 0 and y greater than height-1 would get set to 0.
That is not even a start on if you want to include elastic collisions, angle of impact, any type of deceleration force, or anything else.
In any case... I would recommend that you add more math to your studies, I've never met an engineer or computer science grad that said: "Wow, I really regret taking all that math in college (or HS), I never use it."

Setting a FIXED size for a report

How can I make it so that my report will all ways print off 6 pages. Even if it only uses up 2 pages it will still print off 6? Or if it spans 7 pages only print off 6?
I am using Reports 6i and outputing to PDF...
I have tryed to make little white lines that you could not see on 6 pages... untill the report gets to be and it starts to span 8 pages when it is only on 4...
Can any one help me??
Thanks

Sorry, there is no way to do that in Safari at this time. Your only option would be to use a custom stylesheet, which is not something the average user could do.
You can suggest adding that feature to Apple here Mac OS X Feedback. There is an add-on for Firefox 2 and 3 that will let you set the size for specific sites: NoSquint if you really think you need that ability.
Mulder

How to set up 2 agreements for the same From,To,DocType,Version in B2B11g

Hi
I am having an issue in configuring more than one agreement for the same DocType, Version, From and To partner in Oracle B2B11g.
When I click "Valid" button on the second agreement it errors out saying duplicate agreement is found for the same DocType, Version, From and TO partners.
Is there any mechanism to over ride this?
We need to have multiple agreements created for the same To Partner, From Partner, Doc Type and Version. Otherwise we will end up creating multiple partners which is a real pain.
Multiple agreements are required because we have to set up different Interchange and Group IDs for each transaction.
-Sriharish.
Edited by: 840696 on Mar 1, 2011 7:30 AM

You can not have two agreements for same From TP,To TP,DocType & DocType revision combination in B2B 11g.
Multiple agreements are required because we have to set up different Interchange and Group IDs for each transactionIs this requirement for outbound or inbound? You may send Internal Properties from back-end to override envelope parameters in Oracle B2B in case of outbound -
B2B 11G Outbound EDI Envelope Override
http://www.b2bgurus.com/2008/09/internal-properties-in-oracle-b2b.html (this blog is for 10g, so read concept only, not settings)
In case of Inbound, TP identification can be done on the basis of exchange, interchage, group. So if any of this can be same then you may have single agreement. Make sure to enable property "Functional Ack Internal Properties" on B2B console (Administration --> Configuration)-
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/bb_config.htm#CEGEADFJ
Regards,
Anuj

How to set minimum height size for an empty XML Form iview

Hi,
I'm trying to configure the minimum height size of an XML Form iview without sucess. Even when there is no content to show, iview height size is around 80 pixels. When there is content the automatic configuration works fine and the iview is resized properly.
The iview has automatic size and the minimum size for automatic is with 5 pixels...
Any ideas?
Thanks,
Marcelo

Hi,
I'm trying to configure the minimum height size of an XML Form iview without sucess. Even when there is no content to show, iview height size is around 80 pixels. When there is content the automatic configuration works fine and the iview is resized properly.
The iview has automatic size and the minimum size for automatic is with 5 pixels...
Any ideas?
Thanks,
Marcelo

How to set a fixed size for the browser window on startup?

Similar Messages

Maybe you are looking for