EMC - Certificate status could not be determined because revocation check failed.

I've exhausted my resources on this issue and am reaching out for some assistance. I have setup Server 2008 R2 Enterprise SP1, running Exchange 2010 SP1. In EMC I have successfully imported a GoDaddy SSL certificate. Although I am receiving the message -
"The certificate status could not be determined because the revocation check failed."
Here are the steps I've taken to troubleshoot this so far:
[PS] C:\Users\Administrator\Desktop>netsh winhttp show proxy
Current WinHTTP proxy settings:
Direct access (no proxy server).
As you can see, direct access. Which is true, no proxy's on this network.
For good measure, I'll dump the urlcache.
certutil -urlcache ocsp delete
certutil -urlcache crl delete
Both return 0, reboot server.
Comes back up, same message in EMC.
From PS, I test exactly what its getting from GoDaddy.
[PS] C:\Users\Administrator\Desktop>certutil -f -urlfetch -verify mail.fluxlabs.net.crt
Issuer:
SERIALNUMBER=07969287
CN=Go Daddy Secure Certification Authority
OU=http://certificates.godaddy.com/repository
O=GoDaddy.com, Inc.
L=Scottsdale
S=Arizona
C=US
Subject:
CN=mail.fluxlabs.net
OU=Domain Control Validated
O=mail.fluxlabs.net
Cert Serial Number: 27b60918638e0d
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=S
cottsdale, S=Arizona, C=US
NotBefore: 8/20/2011 7:49 PM
NotAfter: 8/20/2012 7:16 PM
Subject: CN=mail.fluxlabs.net, OU=Domain Control Validated, O=mail.fluxlabs.net
Serial: 27b60918638e0d
SubjectAltName: DNS Name=mail.fluxlabs.net, DNS Name=www.mail.fluxlabs.net
33 49 57 5d 6e d8 6b aa b9 61 73 95 44 07 c9 2e 55 6e 47 10
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 4
[0.0] http://certificates.godaddy.com/repository/gd_intermediate.crt
---------------- Certificate CDP ----------------
Expired "Base CRL (05)" Time: 4
[0.0] http://crl.godaddy.com/gds1-55.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
Expired "OCSP" Time: 4
[0.0] http://ocsp.godaddy.com/
CRL (null):
Issuer: CN=Go Daddy Validation Authority, OU=http://certs.godaddy.com/repository/, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona, C=US
e5 53 19 6c 54 87 8c 62 23 1b b9 11 e1 d8 3d 3f b2 04 77 3f
Issuance[0] = 2.16.840.1.114413.1.7.23.1
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
NotBefore: 11/15/2006 8:54 PM
NotAfter: 11/15/2026 8:54 PM
Subject: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=
Scottsdale, S=Arizona, C=US
Serial: 0301
7c 46 56 c3 06 1f 7f 4c 0d 67 b3 19 a8 55 f6 0e bc 11 fc 44
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
Verified "Base CRL" Time: 4
[0.0] http://certificates.godaddy.com/repository/gdroot.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
Expired "OCSP" Time: 4
[0.0] http://ocsp.godaddy.com
CRL (null):
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
da 1e d5 63 5c 05 58 50 4e db d2 4e e8 9d 28 9d c4 36 b3 1e
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[2] = 1.3.6.1.5.5.7.3.4 Secure Email
Application[3] = 1.3.6.1.5.5.7.3.3 Code Signing
CertContext[0][2]: dwInfoStatus=109 dwErrorStatus=0
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
NotBefore: 6/29/2004 12:06 PM
NotAfter: 6/29/2034 12:06 PM
Subject: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
Serial: 00
27 96 ba e6 3f 18 01 e2 77 26 1b a0 d7 77 70 02 8f 20 ee e4
Element.dwInfoStatus = CERT_TRUST_HAS_EXACT_MATCH_ISSUER (0x1)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[2] = 1.3.6.1.5.5.7.3.4 Secure Email
Application[3] = 1.3.6.1.5.5.7.3.3 Code Signing
Exclude leaf cert:
b1 04 4b 90 a1 d3 48 de 46 bd d7 50 20 e3 44 b8 3f 68 39 f7
Full chain:
68 36 4d 37 2e 96 bd d2 aa 77 3f d0 e8 78 a9 e6 68 bd 7d 71
Verified Issuance Policies:
2.16.840.1.114413.1.7.23.1
Verified Application Policies:
1.3.6.1.5.5.7.3.1 Server Authentication
1.3.6.1.5.5.7.3.2 Client Authentication
Cert is an End Entity certificate
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was
offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.
As you can see, the "revocation server is offline."
So I run the same test from another server on the LAN.
Verified Issuance Policies:
2.16.840.1.114413.1.7.23.1
Verified Application Policies:
1.3.6.1.5.5.7.3.1 Server Authentication
1.3.6.1.5.5.7.3.2 Client Authentication
Cert is an End Entity certificate
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
It passes. The server's firewall has been disabled. DNS cache has been cleared. I have verified everything I can, and still failing to verify.

[PS] C:\Users\Administrator\Desktop>Get-ExchangeCertificate |fl
AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.Acces
trol.CryptoKeyAccessRule}
CertificateDomains : {mail.fluxlabs.net, www.mail.fluxlabs.net}
HasPrivateKey : True
IsSelfSigned : False
Issuer : SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy
, Inc.", L=Scottsdale, S=Arizona, C=US
NotAfter : 8/20/2012 7:16:57 PM
NotBefore : 8/20/2011 7:49:30 PM
PublicKeySize : 2048
RootCAType : ThirdParty
SerialNumber : 27B60918638E0D
Services : IMAP, POP, IIS, SMTP
Status : RevocationCheckFailure
Subject : CN=mail.fluxlabs.net, OU=Domain Control Validated, O=mail.fluxlabs.net
Thumbprint : 3349575D6ED86BAAB96173954407C92E556E4710
[PS] C:\Users\Administrator\Desktop>Enable-ExchangeCertificate -Thumbprint 3349575D6ED86BAAB96173954407C92E556E4710 -Services POP,IMAP,SMTP,IIS
The command has already been executed. Yes, I have seen those sites. Neither have worked. Like I said, it is directly connected; and no proxies are set.
-- Jeremy MCSpadden Flux Labs

Similar Messages

  • Exchange 2010 - The certificate status could not be determined because the revocation check failed.

    I have tried everything I have found online to get my DigiCert to work.
    I have exported the cert and imported it into my child domains and they look perfect.
    It is just my parent domain having issues.
    netsh winhttp show proxy
    does show my correct proxy server for http and https and port 8080
    I have tried name, FQDN and IP address.
    In the Bypass-list I have tried none, *.domain.com, and a list of all domains and child domains in my forest.
    I have flushed the cache
    certutil -urlcache crl delete
    certutil -urlcache ocsp delete
    and rebooted the Exchange 2010 (Windows 2008 R2) server
    No matter what, I still see in my Server Configuration for the parent domain's DigiCert cert the message
    The certificate status could not be determined because the revocation check failed.
    with a red X on the left hand icon.  Again, Child domains all say "The certificate is valid for Exchange Server usage."
    Note: In spite of having the red X, I was able to assign via EMS the services.
    Webmail works fine.  Outlook Anywhere fails... I suspect it is due to my red X problem.
    Suggestions?
    Thanks in Advance
    Jim.
    Jim.

    I have contacted DigiCert and they said the cert is working per their utility, hence the problem is outside the scope of their support.
    I have followed, several times, http://support.microsoft.com/kb/979694
    http://www.digicert.com/help/  reports all is well.
    The DigiCertUtil.exe reports all is well and happy.
    I have run
    netsh winhttp set proxy proxy-server="http=myproxy:8080;https=myproxy:8080" bypass-list="*.mydomain.com"
    Current WinHTTP proxy settings:
        Proxy Server(s) :  http=myproxy:8080;https=myproxy:8080
        Bypass List     :  *.mydomain.com
    I have flushed the cache using the commands
    certutil -urlcache crl delete
    certutil -urlcache ocsp delete
     I still see in my Server Configuration for the parent domain's DigiCert cert the message
    "The certificate status could not be determined because the revocation check failed."
    with a red X on the left hand certificate icon. 
    To verify the cert via command line:
    certutil -verify -urlfetch c:\mail_domain_com.cer
    LoadCert(Cert) returned ASN1 bad tag value met. 0x8009310b (ASN: 267)
    CertUtil: -verify command FAILED: 0x8009310b (ASN: 267)
    CertUtil: ASN1 bad tag value met.
    I suspect this is why I cannot get Outlook Anywhere to connect.
    Child domains show a happy certificate icon. Parent domain does not.
    Still scratching my head.
    Thanks all!
    Jim.

  • Internal Concurrent Manager status could not be determined

    Hi Experts,
    After installation of EBS 12.1.1 we got above error
    "Internal Concurrent Manager status could not be determined"
    while starting CM. and form are not open getting error
    "FRM -92101 there was a failure in the form server durring startup."
    Please help.
    thanks in advance.

    Hi Experts,
    after compile JSP pages i got error in log file as
    [13931] translating: 17s elapsed, 200 successful 0 failed
    [13932] translating: 18s elapsed, 200 successful 0 failed
    [13931] translating: 18s elapsed, 200 successful 0 failed
    [13932] translating: 26s elapsed, 200 successful 0 failed
    [13931] translating: 30s elapsed, 200 successful 0 failed
    [13932] !!TRANSLATION ERROR(0) pvxPrtnrRelLOVMain.jsp:
    [13932] !!TRANSLATION ERROR(0) amsProdCreatMain.jsp:
    [13931] !!TRANSLATION ERROR(0) iecalgrelcontrollist.jsp:
    [13932] !!TRANSLATION ERROR(0) asfAdminQuotaLOVMain.jsp:
    [13931] !!TRANSLATION ERROR(0) pvxEnrlReprtParamMain.jsp:
    [13931] !!TRANSLATION ERROR(0) csfwctrc.jsp:
    [13932] !!TRANSLATION ERROR(0) jtfutc.jsp:
    [13931] !!TRANSLATION ERROR(0) jtfDpfFlowSteps.jsp:
    [13932] !!TRANSLATION ERROR(0) amsTargetGroupDtailMain.jsp:
    [25393] could not delete /u01/VISION/apps/apps_st/comn/_pages/_cabo/_jsps/_gr.java
    [25393] !!COMPILATION ERROR(0) cabo/jsps/gr.jsp:
    javac: file not found: cabo/jsps/_gr.java
    Usage: javac <options> <source files>
    use -help for a list of possible options
    [25393] could not delete /u01/VISION/apps/apps_st/comn/_pages/_jsp/_wf/_WFNtfDetails.java
    [25393] !!COMPILATION ERROR(0) jsp/wf/WFNtfDetails.jsp:
    javac: file not found: jsp/wf/_WFNtfDetails.java
    Usage: javac <options> <source files>
    use -help for a list of possible options
    [25393] could not delete /u01/VISION/apps/apps_st/comn/_pages/_jsp/_fnd/_aolj__framework__agent.java
    COMPILED: 5973 [failed: 556] in 7m58s
    13903 FINISHING Mon Mar 26 05:42:23 2012
    Please help.
    Thanks,
    Mohammad

  • First sync attempt after updating to newest version last week, now telling me that "could not be synced because sync session failed to start"... help?

    I updated my iPod Touch last week, and now I went to sync it with some new music on my computer and I get the message that "could not be synced because sync session failed to start". This is obviously the first step in the process and has never been a message I have received through owning the original iPod, the iPod 2G, and the iPod Touch 2G and now 4G. Any ideas? Common problem?

    Thanks. I couldn't find it previously, but once I asked the question officially it popped up in the suggested answers box on the side. Could not, then, figure out how to delete this comment! Ha. Appreciate you taking the time to point it out though, thanks!

  • When syncing I receive a message "could not be synced because sync session failed to start"

    When syncing I receive a message "could not be synced because sync session failed to start".  I am using the latest iTunes and also phone is on latest version.

    I'm wondering whether you're using the latest iTunes or not. If you're using the latest iTunes and still face the issue, then you should restart both your computer and your iPhone to make sure the sync process go on properly.

  • Error message iPhone 5s could not be synced because the sync failed to start

    My iPhone 5s will not sync i get the error message  "iPhone 5s could not be synced because the sync failed to start"
    running IOS 7.1.2
    Macbook Pro running 10.9.4
    iTunes 11.3.1.(2)
    i did not load any new apps this just started. Thanks.

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • The iPad could not be synced because sync session failed to start.

    I looked through the discussions and couldn't find an answer. I have the latest iOS (5.1.1) and iTunes (10.6.3). My other iOS devices sync fine. I have a MacBook Pro Mid-2010 edition running OS X Mountain Lion (in case this info is needed). I tried doing a soft and hard reset on the iPad, uninstalling and reinstalling iTunes, and disabling Sync Over WiFi. I don't want to do a restore because then nothing I got on the iPad would be synced with iTunes to get everything back! I don't know what the problem is! Please help!

    What the **** is wrong with you?
    So "rebooting" (it's actually  called resetting and refers to the device, not the PC, Mr. IT) works, but one is not supposed to suggest it as a possible troubleshooting procedure?
    The reason "try again" the sync was suggested is because this specific error message is usually generated when the iDevice starts the sync process before iTunes is ready, or vice versa. This might happen when iTunes is on a computer in sleep mode, or the device had Wi-Fi turned off to conserve power.
    Both resolutions are platform agnostic.

  • When syncing ipad to my itunes i get the message 'sync could not be finished because the sync failed to start' help!!

    when syncing ipad to my pc's itunes i get the message 'sync cud not be finished as sync failed to start' help

    So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
    So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
    Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
    My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID.

  • Error message Itunes could not sync contacts because sync server failed

    Where is the Sync server? My new 4S will not load contacts from outlook. Get a "sync server failed" message. Do I need to change something in Itunes or Outlook?

    Hello BillM39,
    Have you tried out the steps in the article below? It has troubleshooting options for when you are having issues syncing anything from Outlook to your iPhone. Make sure to have a back up of your iPhone first before going through options like resetting the Sync History as well as disabling any Outlook add-ins that may be the culprit. 
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    http://support.apple.com/en-us/HT203300
    Regards,
    -Norm G. 

  • TS4062 When I try to sync my iphone with the computer, message reads "iphone could not be synced because sync session failed to start".  What do I do?

    Cannot sync ipone.  Message says 'sync session failed to start'.  What do I do?

    Make sure you don't have Restrictions enabled under Settings/General. If it's enabled, you might need to restart your phone afterwards.

  • Itunes could not sync calendars because sync server failed to sync

    what do I do to resolve this?

    Brenden,
    thanks for the reply, but the troubleshooting tips seemed to concentrate on 'Lion"," Snow Leopard" and the like, I haven't a clue what any of that is. I am using Windows 7 Pro with Service Pack 1 on my desktop and my iPhone is using iOS 8.1.2, as is my iPad mini.  As I said on my previous post, syncing on my iPad mini works fine, It is just the iPhone that fails to sync the calendars. Hopefully a solution can be found as it is difficult to keep things synced on my iPad  and then have to add everything manually onto my iPhone.
    Jack

  • WHT Error - Business Place for document  could not be determined

    Hi Gurus,
    I am getting error while creating remitance challan " Message no. 8I707 - Business Place for document  could not be determined "I have check all the configuration related to business place, section code and remittance challan number range and it seems ok.
    would request you to help me to workout this issue.
    Regards,
    Rahane D

    Hi,
    Please refer to this SAP note to find out the exact error in J1INCHLN
    SAP Note 1465529 - CONSULTING NOTE FOR J1INCHLN
    In addition to this please refer to the following link in case you find out that the posted documents have missing Business place updated..
    Re: Subsequent implentation of EWT (Challan and Certificate)
    Regards,
    SAPFICO

  • Error message: the appropriate pricing procedure could not be determined

    Hi SAP friends,
    What does this error message means please?
    The appropriate pricing procedure could not be determined because no entry with keys 'M100 20 P1' 'A' '1' exists in table 683V.
    Tcode: VA01 (sales order).  
    Regards,
    Bahia.

    Hi Bahia,
                    This error means the pricing procedure has not been done.To assign your pricing procedure to sales area go to the transaction "OVKK" and specify sales org/dist channel/div/document pricing procedure/customer pricing procedure and the defualt condition type. This would solve your problem.
    Regards
    Ram Pedarla

  • ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined error message

    I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
    I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3

    The fact that there is so many discussions with no clear answer is the problem.
    I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing.

  • The software on iphone has expired + Itunes cannot sync apps to the iphone because the apps installed on the iphone could not be determined + Can't restore = Help!

    Hello guys, I'm begging for your help, I've read so many threads, nothing works for me. I hope you will try to help me
    First message I get when I connect the iphone is
    "The software on iphone has expired and must be updated to a newer version"
    Then it tries to backup but I get
    "Itunes cannot sync apps to the iphone because the apps installed on the iphone could not be determined"
    When I click check for updates it says I have the latest version (5.0)
    When I try to restore I always get "iTunes could not backup the iphone because a session could not be started with the iphone. Please disconnect and reconnect the iphone, then try again"
    Tried that MANY times but no luck.
    This iphone was on a developper account but it is not anymore (removed from developper account).
    I'm the administrator on my PC. When I'm on the summary of my iphone it shows N/A as my phone number.
    Back up to icloud doesn't work because I didn't set it up before it stopped working
    When I try to activate it directly from the iphone I always get "Could not activate iphone. Your iphone could not be activated because the activation server is temporarely unavailable..." (for the past 3 weeks :s)
    I can access my music and everything from itunes.
    I even tried to restore it from the ispw file (using shift + restore) but I got an error message (sorry I don't remember which one) but it didn't work.
    I also tried device manager, select PC, scan hardware for changes (read it worked for some) but not for me after that I don't get the
    "The software on iphone has expired and must be updated to a newer version" and "Itunes cannot sync apps to the iphone because the apps installed on the iphone could not be determined" ...I just get "Itunes could not back up iphone because a session could not be started with the iphone" + "itunes could not sync because a connection could not be established with the iphone"
    Please help me make it work again! I'd go to an apple store but I'm in south-east asia at the moment and there is nothing like it in 700km +
    This little machine would be perfect to travel with, it's a shame it just stopped working like 3 weeks ago, just said I needed to activate it again ...
    Thanks a million times!

    I can't access it on the iphone as I said
    On itunes in summary I have  "Software version: 5.0"
    Yes I tried to restore it
    "When I try to restore I always get "iTunes could not backup the iphone because a session could not be started with the iphone. Please disconnect and reconnect the iphone, then try again" ...did that many times but always the same error message
    "I even tried to restore it from the ispw file (using shift + restore) but I got an error message (sorry I don't remember which one) but it didn't work."

Maybe you are looking for

  • Option key is not working on PS4, mac OS 10.6.8

    Hi I'm having a problem with PhotoShop 4, the keyboard shortcut for a couple of tools is not working at all. 1) The Zoom in and out function that uses the Option Key + Shift or Option to change the Zoom in or out is not working.      I'm not sure if

  • Not enough memory or disk space in excel and word office 365

    I have windows 8.1 and am having huge issues with excel and word in office 365. When i download a document i am unable to open as message reads cannot open as not enough memory or disk space. I have plenty of disk space and memory however have search

  • Thinkpad Edge vs. Power Manager

    I'm not sure if this is widespread, but it certainly drives me crazy as a new owner.  While the system was fine and good, once installing Power manager, it always leaves rundll32.exe running in task manager. The feature works fine though  ( at least

  • Aperture 2 vs. iPhoto and Apple Mail

    I thought I heard that Aperture 2 would have a "save to Aperture" option in Mail similar to iPhoto - I guess not. So I am trying to move entirely away from iPhoto to Aperture - How do folks deal with those great photos that come to them via e-mail. T

  • To run a executable file

    Hi Guys & Gals, I need a small help I need to know how to write a java program to run a executable file at a specified time? For example I need to start Editplus at 4.00Pm.