Error message: the appropriate pricing procedure could not be determined

Hi SAP friends,
What does this error message means please?
The appropriate pricing procedure could not be determined because no entry with keys 'M100 20 P1' 'A' '1' exists in table 683V.
Tcode: VA01 (sales order).
Regards,
Bahia.

Hi Bahia,
This error means the pricing procedure has not been done.To assign your pricing procedure to sales area go to the transaction "OVKK" and specify sales org/dist channel/div/document pricing procedure/customer pricing procedure and the defualt condition type. This would solve your problem.
Regards
Ram Pedarla

Similar Messages

Getting Error "Pricing Procedure could not be determined" in CRM Functional

Hi Experts,
While creating Quotation for Products, am getting error message of " Pricing Procedure could not be determined".
Kindly reply, how 2 resolve this by steps-by-steps.
Thanks..
Edited by: poorav4293 on Aug 6, 2011 12:27 PM

Hi,
Go to SPRO-> IMG-> Basic Functions-> pricing. Here goto second node & select determine pricing procedure.
Here check the combination....
sales org-distribution channel-doc price-cust price-pricing procedure.
Here see the corresponding pricing procedure which should be proper based on the condition types.
Thanks!
Aswith.

Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

How to fix error message "the iTunes update server could not be contatced"

What is the cause of error message
"The iTunes update server could not be contacted. Please check your internet connection or try again"
I have set SSL 3.0 to on
used the itunes diagnostic to check internet connection and the reoprt is
Network connectivity
     Network interfaces verified OK
ITunes Store connectivity
     Internet connectionverified OK
     Secure link to iTunes store failed Red dot= NOT OK
deleted the SC file in SC info directory no success.
Any Suggestions
searchin for an answer

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Mavericks Update - Error message - The product distribution file could not be verified

Help!
Trying to download mavericks (from 10.7.5) as I have just had a new hard disk isntalled and need to start from scratch.
Wanting to re download iphoto but I can't as I need a newer OS so trying to download mavericks from the app store. My internet is very slow and keeps cutting out so I have tried a few times but it's not working.
Now I'm getting an error message - 'the product distribution fil could not be verified'
If anyone can help that would be great.
Or even let me know where I can get a copy of iphoto to suit OS 10.7.5 so I don't need to download a whole new OS.

You're trying to download a 5 GB file. If your Internet connection is lousy, you won't have much success. Try another network.

Time Machine Error Message: "The backup disk image could not be mounted"

I just installed Time Capsule and the initial back up was going smoothly. Now
all I get is a and the Error message "The backup disk image could not be mounted". Can anyone help me troubleshoot this problem? Thanks.

This works, if there is no corruption in the sparse image. But after weeks of backups, my sparse image on a USB disk attached to an Airport Extreme was corrupted.
I am right now repairing it by connecting the USB disk directly and using disk utility. It recovered the file system and is not rebuilding the B-Tree. I hope that works, otherwise it will have to be disk warrior...
On Time Capsule, I have heard folks having success with attaching the image, and then repairing it:
hdiutil attach -nomount -readwrite /path/to/sparse/image
Your mileage may vary, but you do not have a lot to lose in this circumstance...
This functionality should really be in the Airport or Time Capsule, or at least Disk Utility or Airport Utility.

Time Machine error message: The backup disk image could not be created

I got a new MacBook the other weekend and Time Capsule. I have set up the time capsule, its light is green, it shows up as a device in my finder window and the printer it shares is accessible.
The problem is when I try to run time machine I get the error message "the backup disk image could not be created" I have the time capsule selected as the drive I want to back up to. I have read through all 150 help topics on the Mac Support page regarding time machine and am now turning to you the community to help!

I found an answer in another place on this forum...http://discussions.apple.com/thread.jspa?threadID=1422065&tstart=330
Just have to give my computer a name under system preferences/sharing

HT201210 Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

Pricing Procedure could not be determined

Hi..
basic doubt -- but causing issue.
I have assigned the combination of sales area + Doc. Pric Proc + Cust Pric -- > Pricing Procedure in customizing.
customer pric prc. -> assigned to BP sales area , billing data (Also seen on Prices tab of transaction)
Doc pric proc - > assigned to the transaction used.
Sales area of transaction -- > same as used to assign pric proc
Still error creating transaction - TA standard order, Message no. CRM_PRIDOC_COM401 - Pricing Procedure Could not be determined. Also the error says to assign a pricing procedure to the combination of sales area + doc pric proc + cust Pric proc which I have already done.
But on the prices tab of transaction I cant see the "Pricing Procedure" and a blank screen on Conditions Tab of transaction.
any clue.. pl help

Hi,
Please check again if your SALES AREA at header level is picked correctly and which matches with the SALES AREA in the PRICNG procedure determination
ALSO if the above is maintained correctly, it might happen that you have created the transaction earlier then you have assigned the sales are to the Customer along with the BILLING tab information.
Run one report
HRBCI_ATTRIBUTES_BUFFER_UPDATE
If you have done the second one then just delete the customer, assign any other customer with which this issue would not appear and the error would go. Now again delete the customer and reassign your previous customer and check.
Regards
Surendra More

CRM 2007 - Pricing procedure could not be determined

Hi Gurus
We starting an implementation of CRM 2007.
For my Service Ticket transaction we are receiving the message "Pricing procedure could not be determined". We do not need any Pricing as this is purely a service orientated call centre and pricing has no impact on the services we provide.
We're using the dummy service product "INVESTIGATION".
I've tried modifying the customizing to use a Pricing Procedure but this has failed to work.
Is there config which will prevent this error from showing up in the first place.
Maximum points for a speedy response.
Many Thanks
Panduranga

Hi Vishant
I checked the following
1. Assign the sales area of your sold to party a customer pricing procedure.
    In transaction BP for my customer in role "Consumer" data is as follows:
    Sales Org - Defined
    Dist Channel - Defined
    Billing Tab
            Cust Pric Procedure: Standard
2. Assign your transection a document pricing procedure.
     Transaction has Leading Category "Service Process" is not possible to assign a document pricing procedure. Unless you know of another way?
3. for document pricing procedure, customer pricing procedure and sales area data, define the pricing procedure to be used.
    Under SPRO - IMG - Customer Relationship Management -
              Basic Functions - Pricing - Pricing in the Business
              Transaction - Determine Pricing Procedure.
    Sales Org, Dist Channel, Division, Doc Procedure (S - Service Process), Cust Pric Procedure (Standard), Procedure ((0CRMBP) used this as it only has one condition)
4. in product master data, define the values of condition types being used in the pricing procedure (if you dont need the prices, you can just define them as zero).
Added conditions to the Product
Unfortunately I'm still receiving the same error, can you assist further?
Regards,
Panduranga

Error Message: The following disk images could not be opened

When downloading the free trial for CS6 for Mac, I get an Error message stating that "the following disk images could not be opened: Photoshop_13_LS16.dr invalid checksum.
Please help!!!

Is there any messages within the Adobe Download Assistant? This error can happen if you try mounting the DMG before the download is complete.

Error message while CREATING PO - PGrp could not be determined

Hi all,,.
We are on SRm 7. ECS.
The issue we are facing is:
WHen I click on CREATE PURCAHSE ORDER trasnaction,I get this message "Purcahsing group could not be determined;Inform system administrator".
Edited by: nmsrm1234 on Nov 10, 2011 2:09 AM

Hello,
The error is coming because to create PO directly you have to be a Purchaser,you need to belong to a purchasing group in SRM.In PPOMA_BBP Assign your user id below a purchasing group directly or right click the present position and go to 'Assignment-->Purchaser Assignment', select a purchasing group and save.
Then Try creating now a purchaser order directly .
Regards,
Neelima

PY error message - EE's salary group could not be determined for Plan Life

We are running through Payroll errors when there is a Separation action being carried :
u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
On IT0168 the costs are u20180u2019
This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

During the "Separation" action, does the employee change WT on IT0008?
If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

Error message: the appropriate pricing procedure could not be determined

Similar Messages

Maybe you are looking for