Employe picture in report 6i

hi every body
i have emp table with two columns empid and empname and i save all pictures
on d:\emppictures folder with empid as picture name know i want to display employee pictures in the report with each employee record
kindly any body tell me how i can accomplish this
thanks and regards
Allah Hafiz

Hello,
why do you need to load images from operating system? Customer requirement?
The better option without any doubt would be saving images in a column in the database...
Apart from that.... (please separate your phrases.. to understand better the problem)... as I can understand... you have the problem in the report, not in the Form builder? If that's the case.. please, have a look at Reports forum...
(You said that it appears the same image for all employees...? That depends on how you've entered the path..; you can't put a fixed path...)
Any way.. post in reports forum with the code you're using to load images in the report.
Jose L.

Similar Messages

How to Insert picture in Database & how to Show this picture in Report/form

Hi
I have create a table and want to insert picture in this table in Blob format and also want to show this picture in Form / Reports
Regards
Shahzaib ismail

Hi Shahzaib,
create table
graphics_table
bfile_id number,
bfile_desc varchar2(30),
bfile_loc bfile,
bfile_type varchar2(4)
SQL> INSERT INTO graphics_table
2 VALUES(4,'April Book of Days Woodcut',bfilename('GIF_FILES','APRIL.JPG'),'JPEG');
1 row created.
In this way you can inserrt picture inside the database.
Regards
Rajat

How to include picture in report

Hi
My report having 4 fields like
2005total trend 2006 total   difference like
9%    pic 4%      -5%
7%    pic   7%      0%
21%   pic   28%     7%
depending upon the value in difference field,
i have to show the picture color
means if it is 0% then blue circle
           if it is leesthan 0% then greencircle
           if it is greaterthan 0% then redcircle.
Please give me solution. how to add picture? how to change color based on condition?
Thanks.

Swetha,
You could add a blanco picture and edit the properties. On the second tab (Picture? I am not sure, I have the Dutch edition), the location of the picture can be set using the formula editor.
An example of using different pictures for different values:
IF {Percentage} = 0 THEN ".\blue_circle.png" //meaning: The file blue_circle.png in the same folder as the report will be shown if the percentage is 0%
ELSE IF {Percentage} > 50 THEN ".\green_circle.png" //meaning: The file green_circle.png in the same folder as the report will be shown if the percentage is between 0 and 50 %
ELSE ".\red_circle.png" //meaning: The file red_circle.png in the same folder as the report will be shown if the percentage is between 50 and 100 %

Picture in report

We need to add company logo for all the reports in SAB B1(Customer report).
please let me know the way giving the path for picture folder to affect all the users.
Regards
Pradeep

First step
All your users should have access to the SAP Business One folder on the server
ServerName\Program Files\SAP\<b>SAP Business One</b>
Second step
In the B1 Application you have to open this window
Administration > System Initialization > General Settings > Path
Set the Path for the Picture Folder by clicking on the Icon and selecting the Bitmaps folder with SAP Business One under program files. This would look like the following
<i>
ServerName\Program Files\SAP\SAP Business One\Bitmaps\</i>
Once you have done this you can add your company logo to the different documents and the user would be able to see the same when they open it.
Note: You could also set the path for the other documents like Word templates, Excel Folder, etc from here
Best wishes
Suda

Upload 1000 of Employe picture in Oracle HRMS through any backgroup process

Hi
Do anybody help me, how to upload 1000 of Employee picture data in Oracle HRMS through any backgroup process.
Regards
Makshud

Hi,
Please refer to the following thread.
API to load images for
API to load images for
Regards,
Hussein

EEA2 Employment Workforce Analysis report, SAP ECC 6.0

hi gurus
I need to do config so that I can have all the new engagements/exits/promotions in each month on the report when it is run. I went to table t5w10 which is only for category options ans salary levels. how do I configure this on SAP so I can have engagements/promotions/resignations on the report on each particular month its run? please

Hi
If SAP ECC as back-end of your dashboard, as per the best practice, pushed down to database level all the predefined time periods and include at the
–Classic InfoSets
–ABAP Functions
–ABAP Queries
So in the BO dash board we can just drag and drop. So it’s will improve the performance also.
Please find the below like’s Universe Optimization Techniques, pushed down all the calculation to database level
http://scn.sap.com/community/semantic-layer/blog/2014/05/14/universe-optimization-techniques

Show Picture in Report

Hi i need to include an imagen in my report, but i can't create an extra dynpro for it.
Let me explain: When you execute your report and you have a write sentence, the report launches a new screen with the text you have written. But this screen is not a dynpro i can edit with screen painter.
Can i insert an image in this screen?????
Thanks.

Hi Jose,
I don't suppose you can edit the write screen,
You may have to create a screen from screen painter and call the image there in the
image control or the custom container.
Regards,
Samson Rodrigues.

Creating a report with a Picture in Windows 7

We have Oracle reports 10g (10.1.2.0.2). From Reports Builder, when running any report that has a picture, I keep the picture in : C:\oradev1012\reports\templates and it runs without issue. However, it runs without issue using a Windows XP machine, not Windows 7. When running on Windows 7, and trying to run a local RDF from Report builder, where should I put the pictures so Report builder can see them?
Thanks in advance!

Hello,
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_lay_hyperlink.htm
Example 4: Data-driven hyperlink
The following example shows a value for the Hyperlink property that specifies a link that needs to have data values provided:
HTTP://SERVER/PATH/RWSERVLET?REPORT=DEPARTMENT.JSP&P_DEPTNO=&DEPTNO
Regards

Cannot import some pictures: reported as corrupted

I receive family pictures from my brother. He uses Photoshop. Some JPEG pictures are reported to be "corrupted" and won't import to iPhoto 08, most will. If I put them through my Photoshop Elements and make them PNG, twice the size, but then they will import.
Why can't iPhoto 'read' the pictures, yet Preview and Photoshop Elements 4 can? I'd sure like to use iPhoto, heck... it's kind of nifty. But at this rate, it's getting a bit annoying with having to rebuild the database thumbnails (black thumbnails) all of the time.
Primarily, the issue is not being able to import some JPEGs, however.

ringhome
Just try opening the files in Preview and then saving them as jpeg - then try import. This issue can arise because PS sometimes adds metadata that iPhoto can' deal with.
The Black thumbnails can be caused by importing greyscale images - iPhoto supports RGB only. If that's not the issue and the problem is persistent then check your HD for minor errors using Disk Utility.
Regards
TD

Report + Picture?

hi all
can we display picture on report by using form form? like we display user name on report. is there any way to display employees picture on report?
sarah

Hello,
For the question : "can we display picture on report by using form form?"
... i'm not sure to understand "..using form form ..."
For the question : "is there any way to display employees picture on report?" , the answer is yes :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_col_read_from_file.htm
Example 1: Image
Suppose that for each of your employees you have a .bmp file that contains a picture of the employee. In your employee table, you have a column named PICTURE that contains the name of the .bmp file with the employee's picture.
To generate a report that displays the employees' pictures, you select the PICTURE column in your query. In the Column properties for the PICTURE column, you set Read from File to Yes and specify Image as the File Format. Reports Builder will display the files pointed to by the PICTURE column wherever you have referenced the PICTURE column in your layout.
Note: If Read from File is set to No, the filenames will be printed instead of the pictures.
Regards

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

Print a IMAGE in a REPORT

I need to print a IMAGE (hosting in the SE78 transaction store) in a REPORT.
is it possible????
Wait your responses. See you.

Hi,
Using ALV, you can upload logo into report like this:
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.
Regards,
Bhaskar

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

Add Range Selection for Cost Center in Report Painter

Dear Gurus,
I had a report painter which had Cost Center selection, may I know how to change the cost center selection become in range like shown in below picture?
[Report Painter - Cost Center in Range|http://www.pikipimp.com/pp/pimped_photo/s/image/42/231/888/range-compiled.JPG?ts=1236930732343]
Thank you very much!

Hi,
Thanks for your guide, is really detail ~
I had follow your step, create a new variable set for the cost center at GS11.
When I want to include the set (KOSTL2) into the general data selection it prompt this [error|http://www.pikipimp.com/pp/pimped_photo/s/image/42/314/153/ErrorGS12-compiled.JPG?ts=1237172967140] may I know how should I correct it?
Is it my setting was wrong?
Please guide if possible.
Thank you very much!
Warm regards

Employe picture in report 6i

Similar Messages

Maybe you are looking for