Employee Photo - External HTTP service

Hi all,
currently I trying to setup the Employee photo dysplay in the portal Iview photo and in PA20/30 transaction. My problem is that I have the requirement to use an external http service that doesn't supports SAP Content Server HTTP Interface and it requires Basic authentication.
The access to the picture can be done by a direct url http://hostname/path/pernr.jpg ou using a dll service, http://hostname/path/service.dll?docid=pernr.
Does anyone ever face a similar problem, is there a way to implement this using "standard" features?
For example put the access logic to the picture in a function module or other object, and setup the z* object has the content server implementation.
Thanks and best regards,
Paulo Ruivo

Hello
Where are you trying to store the photos? In an external storage system or in the database?
If you are using an external storage system, please note that you must use either a different content server installation for each system, or at least a different content repository.
In case you are using the database storage, then make sure you have followed all the instructions from the note 595563 to do this. In case everything is fine, please go to OAC0 and test the connection to your content repository.
Additionaly please ensure that you have the lastest version of SAPHTTP installed on your system. Please review the SAP  note 615354 for more information on this.
Thanks and Kind Regards
Ramana

Similar Messages

  • Displaying Employee Photo thru Web Service

    Hi,
    I am having a requirement of displaying the employee photo's thru weservice, in asp.net application.
    Is it  possible?
    If anybody knows..
    Guide me to close this issue...
    Thanks & Regards,
    Balajee Jeyaraj .

    Hi Pramod,
    Thanks for the reply, we stored all our employee photos on  ECC System Only...
    If i enter the Personal No: in PA30, i am able to see the EMployee Photos on the Header..
    But While accessing the COD Service from the Portal, asking ECC system credentials to display the photo.. If i am providing the Credenials Employee Photo is displaying .. other wise Blank Image Displaying...
    Siddarth suggested its due to SSO problem, if its sso issue, how come i login into portal without any errors currently we are using ABAP UME both Portal and ECC Login details r same...
    Please Suggest me how to fix the issue...
    Thanks in Advance
    Adapag

  • Employee Photo not displayed in ESS- Who's Who Services

    Hi All..
    My employee photo upload was successful in Quality System . I can also view the photo both in R/3 employee related facsmiles , header of PA20, PA30. and also the same photo's are displayed in ESS - Who's Who services.
    steps I used-
    OANR, OAC2, V_T585O, OAC3, OAC0 and for manual upload OAAD & OAOH.
    For Mass Upload - program- OA_UPLOAD_AND_LINK
    In production in the same way , all the photo's can be seen in the facsmiles but if I checked in Who's Who..Its coming like a outline with a red cross on top corner but without any photo.
    Kindly give your valuable suggesions..
    Thanks in advance...

    Hi Alok,
    I am also facing the same issue in Prod Environment. If u r having the solution, please share with me.
    I checked in NWA Trace is not registering.
    currently i am facing issue with Employee Photo Under ESS--> Emp Search --> Change Own Data.
    All my Employee Photos are uploaded in ECC, i am able to see from PA30 Header.
    we are having same setup in QA- Environment , all the employee Photos we are able to see from Portal.
    But in Production Environment, We are Having One Central Instance and Three application Instances and configured Load Balancing among Central Instance and Application Instances.
    All the Servers Content Server in SICF t-Code is activated.
    If i login into Prod Portal [either Centeal Instance or Application Instance] some time Employee Photo is Displaying Some time not,i.e No Photo at the top of corner X symbol. If i right click check on that URL, its poiting to the ECC server content server.
    But If Not is Displaying --> Size is Showing Not Avaliable but Demension is Displaying.
    But if Photo is Displaying ---> Both Size and Dimensions are Displaying Properly...
    PHOTO URL Path  When Photo is  Displaying
    http://xxx025.xxx.com:8011/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA926D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091012&secKey=MIH4BgkqhkiG9w0BBwKggeowgecCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxzCBxAIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDkwNjMxWjAjBgkqhkiG9w0BCQQxFgQUS%2BicVNGV7i6eSE8TXK5R3umNS%2FgwCQYHKoZIzjgEAwQvMC0CFQCPAZf3C48Lvl6i935mlsVqMw95owIUUJFedqFO2AoLGe6QCHHqBMSObIU%3D
    Type : JPEG Image
    Size : Not Avaliable
    Dimension: 170*200 Pixels.
    PHOTO URL Path  When Photo is Not Displaying
    http://yyy024.yyy.com:8010/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA927D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091451&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDg1NzQ3WjAjBgkqhkiG9w0BCQQxFgQUAP9cyWhLiOtkp4vwo9KK%2FPQtxWgwCQYHKoZIzjgEAwQuMCwCFDs729ib7fVKbiGKz5CPPd1YHch3AhR7NVgtXJI7ej07GiKMpG06lZPWoQ%3D%3D
    Type : JPEG Image
    Size : 3527 Bytes
    Dimension : 170*200 Pixels.
    We are always opening the Portal with Fully Qualifies Domain Name (FQDN)
    Please suggets the Solution, how to get rid of this Porduction Issue.
    Thanks & Regards
    Ganesh

  • Consuming an External Web Service using HTTPS and WS Security

    Hello everyone,
    I'm having a problem setting the security information in a SOAP header using a generated ABAP Client Proxy to consume an external web service that requires a User ID and Password in the Header section of the SOAP message.  I need to use HTTPS. I'm on a WAS 7.01 SP08 system so from my readings, SAP is supposed to be able to add the username and password into the header section of the message.  I can't seem to get SAP to add this information added to the header.
    Here are the steps that I have taken to set the security values.
    1) Created the client proxy from the WSDL in SE80.  Basic Authentication on the Configuration tab was turned on automatically.
           Note, Transport Security is set to None.  I cannot change it.
    2) Created an outbound set user name profile in transaction WSPROFILE with the appropriate username and password.
    3) Added the profile to the default port in transaction LPCONFIG as an outbound under the WS Security section of the screen.
    When I called the external Web Service, I got back the following error message:
    com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC5509E: A security token whose type is [http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken] is required.
    So, after reading through this Forum, I saw that I needed to use the SOAMANAGER.  I set up a Proxy in the SOAMANAGER and manually created the Logical Port.  This was the only way I could figure out how to set the Authentication Settings in the Logical Port to "User ID / Password".  I then entered the User ID and Password.
    However, I am still getting the same error message.  I feel I am close but missing some small configuration to tell SAP to use WS Security with a Username token.
    I'm not sure what I'm doing wrong, so any help would be appreciated.
    Thanks,
    Stephen

    I had this error again so I thought I would post my solution:
    The issue is SAP needs to know the certificates being used by the web site being called.  These certificates are automatically installed in your browser but need to be manually installed in SAP.  This is what I did:
    How to find/install new certificates
    Make sure you run Internet Explorer as an Administrator so you can export the certificates
    Go to the web site that SAP is trying to call in Internet Explorer
    Double click on the lock in the address bar
    View certificates
    Find the certificates that are being used
    Tools --> Internet Options --> Content --> Certificates
    Click on the “Trusted Root Certification Authorities” tab
    Find the certificate identified in step iii
    Export as a CER certificate
    Click on the “Intermediate Certification Authorities” tab
    Find the certificate identified in step iii
    Export as a CER certificate
    Go to STRUST in SAP
    Import the Certificates in the “Anonymous” or “Standard” SSL client
    Save
    RESTART the ICM via t-code SMICM  <-- Critical!!!
    Test

  • External Web Service - User and password in HTTP header

    Hi!
    How is it possible to add user and password in the HTTP header in a external web service call? 
    I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio.  I following the Java Development Guide - Web Service Security, and use the <i>secured service connection</i>.  I have also created a new <i>System Landscape</i>, but should the new system be based on HTTP, my own PAR or what?
    How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
    Cheers
    Asle

    Hello All,
    I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
    I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
    OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
    Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
    Sorry for the long post. Hope someone can help. Thanks.

  • Get employee photo and display the photo in external system.

    Hi,
    We start to work with the portal....We want an application that display the employee photo..
    The photo is the same one that appear in pa20/30...
    We create the photos in OAAD and have a table repository.
    How from here i can use this to build a RFC that return "data"..that from the external system we can show the photo,
    Thanks.

    write a RFC which uses
    'HR_IMAGE_EXISTS' to get the image document id and then use 'ALINK_RFC_TABLE_GET' to  image in JPG format convert the returned RAW table to xstring format using SCMS_BINARY_TO_XSTRING pass the resulting xstring as the export parameter of this RFC .
    portal application can now use this xsring to render the image.
    Regards
    Raja

  • Employee photo is not updated in ESS Who's who service

    hi colleagues,
    i am facing an error when i am trying to update the employee photos in the who's who service of ESS.
    when new photos are added against an employee number via tcode OAAD in the ECC system, they are updated against the record and can be seen in tcode PA20. however, the new photos are not getting updated in the who's who screen. we have tried clearing the cache (figuring there might be a problem with the browser.... we are using IE 7.0) but were still unsuccessful.
    any advice will be greatly appreciated.
    thanx,
    Amer

    hello deb,
    already did.... not working there as well. except for the first time during logon, it does not ask for any user id or password while viewing the photo in the portal. the photo gets updated in PA20, PA30 but does not get refreshed in the portal. the portal shows the same old photo.
    any comments or advice would be helpful.
    thanx...

  • Employee photo is not displayed in ESS Who's who service

    Hi colleagues,
    Please help our colleague in this issue:
    1) They have implemented correctly the procedure to display photos in PA20/PA30 and the current ITS based ESS who's who is displaying the photo.
    2) They are trying to implement EP 7 with XSS BP 1.0 SP10 bold however in the Who's Who service the employee photo is not being displayed.
    Best regards

    Hi,
    Yo would have check the forum..
    Display Photo in Employee Who is who search
    Kind Regards
    Hari Sankar M

  • Error calling external web service over HTTPS

    Hi everyone
    I'm trying to call an external web service over HTTPS, and continually get the following error:
    com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException: Peer sent alert: Alert Fatal: handshake failure
    I haven't tried doing this before, so not quite sure where to start. I have a client certificate that must be used to access the remote web service, and I think the problem is associating the client cert with the web service call.
    Has anyone else tried this before? Any suggestions of where to look?
    I've had a brief look at Key Storage in NWA, but it's not something I'm familiar with - so not sure if it's even the right place to be looking.
    Some help on this would be great!
    Thanks
    Stuart

    Thanks Aleksandar
    Here's the output from the trace. Unfortunately the SAP forums don't allow attachments, so it may be difficult to read. Please let me know if you see anything that may help.
    Thanks
    Stuart
    Time Severity User Thread Location Message
    09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@fa1b67
    09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@4c8af
    09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@b6981b
    09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' are configured '10.|127.|192.168.*'.
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' default value is '10.|127.|192.168.*'.
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Loadin mapping file from location :[c:/mapping.txt]
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Additional file for CTS configuration can not be found [c:\mapping.txt (The system cannot find the file specified)].
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider >>>>>>>>> ERROR: Could not find mapping for service QName=vipSoapInterfaceService, class=class com.verisign._2006._08.vipservice.VipSoapInterfaceService
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Creating client instance with WSDL URL [https://pilot-vipservices-auth.verisign.com:443/prov/soap/val/soap] (vipSoapInterfaceService) <com.verisign._2006._08.vipservice.VipSoapInterfaceService>
    09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Using SAP JAX-WS Implemetation to create service delegate.
    09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@5586b0
    09:18:26:687 Path Administrator HTTP Worker [0] ~s.espbase.wsdl.exceptions.WSDLException Exception : Peer sent alert: Alert Fatal: handshake failure
    java.lang.Exception
    at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
    at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:147)
    at com.sap.exception.BaseException.<init>(BaseException.java:89)
    at com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException.<init>(WSDLException.java:34)
    at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:140)
    at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
    at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
    at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
    at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
    at javax.xml.ws.Service.<init>(Service.java:57)
    at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
    at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
    at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
    at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
    at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
    at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
    at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
    Caused by: org.w3c.www.protocol.http.HttpException: Peer sent alert: Alert Fatal: handshake failure
    iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
    at iaik.security.ssl.r.f(Unknown Source)
    at iaik.security.ssl.x.b(Unknown Source)
    at iaik.security.ssl.x.a(Unknown Source)
    at iaik.security.ssl.r.d(Unknown Source)
    at iaik.security.ssl.SSLTransport.startHandshake(Unknown Source)
    at iaik.security.ssl.SSLTransport.getOutputStream(Unknown Source)
    at iaik.security.ssl.SSLSocket.getOutputStream(Unknown Source)
    at org.w3c.www.protocol.http.g.markUsed(Unknown Source)
    at org.w3c.www.protocol.http.HttpBasicServer.getConnection(Unknown Source)
    at org.w3c.www.protocol.http.HttpBasicServer.runRequest(Unknown Source)
    at org.w3c.www.protocol.http.HttpManager.runRequest(Unknown Source)
    at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
    at org.w3c.www.protocol.http.HttpURLConnection.a(Unknown Source)
    at org.w3c.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at java.net.URL.openStream(URL.java:1007)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:201)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
    at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:282)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:293)
    at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
    at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:146)
    at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:132)
    at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
    at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
    at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
    at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
    at javax.xml.ws.Service.<init>(Service.java:57)
    at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
    at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
    at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
    at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
    at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
    at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
    at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
    at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
    09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@20ba3c
    09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@26e3bf
    09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@f827f6
    09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@a8646a
    09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@c449f1
    09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
    09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
    09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ B E G I N ].timerId=15
    09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ E N D ].timerId=[id:#15, elapsed: 0 ms.]

  • Employee photo - send to external system

    Hi,
    There is requirement that need to send employee photo from sap to the external system.  How can I do this?  Any function or sample code for this?

    REPORT ZHR_BDC_UPLOADPIC NO STANDARD PAGE HEADING LINE-SIZE 255.
    INCLUDE
    INCLUDE BDCRECX1.
    I N T E R N A L T A B L E S
    DATA : BEGIN OF IT_DATA OCCURS 0, RP50G-PERNR(8), " LIKE RP50G-PERNR,
    RLGRAP-FILENAME(128),
    END OF IT_DATA.
    S T A R T - O F - S E L E C T I O N
    START-OF-SELECTION.PERFORM OPEN_GROUP.
    CALL FUNCTION 'UPLOAD'
    EXPORTING
    FILENAME = 'C:\PICTURE.TXT'
    FILETYPE = 'DAT'
    TABLES
    DATA_TAB = IT_DATA
    EXCEPTIONS
    CONVERSION_ERROR = 1
    INVALID_TABLE_WIDTH = 2
    INVALID_TYPE = 3
    NO_BATCH = 4
    UNKNOWN_ERROR = 5
    GUI_REFUSE_FILETRANSFER = 6
    OTHERS = 7.
    IF SY-SUBRC NE 0.
    WRITE : / 'Unable to upload data'.
    STOP.
    ENDIF.
    LOOP AT IT_DATA.
    PERFORM BDC_DYNPRO USING 'OANEWCON' '0100'.
    PERFORM BDC_FIELD USING 'BDC_CURSOR'
    'TOAOM-AR_OBJECT'.
    PERFORM BDC_FIELD USING 'BDC_OKCODE'
    '=NEW'.
    PERFORM BDC_FIELD USING 'TOAOM-SAP_OBJECT'
    'PREL'.
    PERFORM BDC_FIELD USING 'TOAOM-AR_OBJECT'
    'HRICOLFOTO'.
    PERFORM BDC_DYNPRO USING 'SAPLSJ01' '0200'.
    PERFORM BDC_FIELD USING 'BDC_CURSOR'
    'FIELD_VALUES-INPUT(02)'.
    PERFORM BDC_FIELD USING 'BDC_OKCODE'
    '=OK'.
    PERFORM BDC_FIELD USING 'FIELD_VALUES-INPUT(01)'
    IT_DATA-RP50G-PERNR. "'10002'.
    PERFORM BDC_FIELD USING 'FIELD_VALUES-INPUT(02)'
    '0002'.
    PERFORM BDC_DYNPRO USING 'SAPLOPTM' '0105'.
    PERFORM BDC_FIELD USING 'BDC_CURSOR'
    'SAPB-SAPPOOLINF'.
    PERFORM BDC_FIELD USING 'BDC_OKCODE'
    '=OKAY'.
    PERFORM BDC_FIELD USING 'SAPB-SAPPOOLINF'
    IT_DATA-RLGRAP-FILENAME. "JPG'.
    PERFORM BDC_TRANSACTION USING 'OAOH'.
    clear IT_DATA-RLGRAP-FILENAME.
    ENDLOOP.
    PERFORM CLOSE_GROUP.

  • Employee photo upload issue

    Hello Experts,
    i am uploading a photo wih the help of abaper but problem is when i run t code OAC0 and create repository for that
    storage type should be type as R/3 database .but when I  am selecting it is not coming another option is comes HTTP CONTENT SERVER.
    Wiil u plz help me out?
    i used below step
    Now Create the A2 repository with Tcode: OAC0
    While creating the repository, keep the Document Area blank, Storage type as R/3 database, Rep. Sub-type will appear as Normal by default, Version No. as 0046 and in Contents table put 'SDOKCONT1' as the table name.
    Thanks and Regards
    Jaydeep Jadhav

    U can follow the following steps.
    Configuring Employee Photos
    Create Number Range
    A number range must be created for SAP Archive Link.
    Transaction code: OANR
    For this process, additional authorisation is required for S_NUMBER = 03 ARCHIVELNK.
    In u2018Intervalsu2019, create number range 01 from 0000000001 to 9999999999 without the external number flag.
    This is likely to already exist.
    Assign Documents Class
    Document type HRICOLFOTO must exist with document class JPG.
    Transaction code: OAC2
    Table TOAVE
    Document type settings
    Document type HRICOLFOTO must be linked to object type PREL and Infotype 0002.
    Transaction code: SM31
    Table V_T585O (View)
    Set all three columns here to minuses and don't put a flag in the check box.
    Content Repository
    Create a content repository with storage type FILE archive.
    Transaction code OAC0
    IMG: Basis Components --> Basis Services --> SAP Archive Link --> Basic Settings --> Maintain content repositories
    Swap from display to amend. Select a current entry and u2018copyu2019 or just hit u2018createu2019. Then select .
    Then fill in the details as below:
    Choose a two character name u2013 can use Zx (where x is a number) if you wish to use the customer namespace
    Choose the relevant description
    Set DocArea to be u2018Archive Linku2019
    Storage type u2013 set to R/3 Database
    Protocol u2013 leave blank
    Choose Version no. 0046 (or the latest one that is available)
    Contents table u2013 set this to SDOKCONT1
    Basic Path u2013 c:\ (this should be set to where the photos are all held)
    Archive Path u2013 c:\ (this is the area from where the photos are retrieved)
    Output Device u2013 can leave blank
    Enter the path name where the photos are to be loaded from. Note this is for loading only. When the photos are linked into the sap system (see later), actually, SAP takes a u2018copyu2019 and stores it elsewhere. The path may only need to be entered to u2018Arch.pathu2019, but entering to all three doesnu2019t seem to hurt.
    Maintain the required Basis Service
    Transaction code: SICF
    Here you activate the Content Server Interface.
    First you need to create a user profile u2013 with sufficient authorisations to carry out the processes which are done by the system in the background. Ideally this should be a background user for a notional/dummy user. You can use your own user ID after which SAP will warn you that this is a dialogue user account. If you do use your own user ID, change it as soon as you have tested the config. Once you have finished the project, the chances are that your user account will be deleted from the system which will subsequently stop this service from working.
    Double-click on u201Ccontent serveru201D in the left hand tree structure. You can find it under default_host --> sap --> bc --> content server
    Once you have done this click on the refresh icon and make sure that the service is activated. If it is activated, the writing should be in bold (as opposed to greyed out)
    Check which content repository (Archive) is linked to document type HRICOLFOTO in object type PREL
    Transaction code: OAC3
    Table TOAOM_C
    Set the u2018Content Repositoryu2019 field to the one you set up in the step above.
    Note the Ret.per. field is the retention period for the photo in MONTHS. (so the default is 833 years and 3 months!)
    Link photo to personnel number
    Transaction code OAAD
    Click on the Create u2013 Store and Assign button. Enter Business Object PREL and Document Type HRICOLFOTO. Click on create(F8).
    Enter the Personnel Number of the employee you want to link the photo to.

  • OADP - Column Employee Photo

    Hi experts,
    I have configured OADP (Object & data provider) for a special group of employees. So I defined my own rules with own function module for object selection and it´s working fine.
    But I have a special requirement. I need a column with an employee photo. I found an example in the WDA´s of Talen Management -> Talent Information (HRTMC_TEAMVIEWER)
    Our employee photos are stored in a content repository and via archivelink I able to use them. Like this
    http://:/sap/bc/contentserver/100?get&pVersion=0046&contRep=Y2&docId=4D5540DB3F083762E10000000ABA706A
    My idea:
    - define a custom cloumn -> Z_PHOTO
    - create a FM for Column Contents with a copy of HRWPC_RC_PHOTO ->Z_HRWPC_RC_PHOTO
    - read with FM the URL of the photo
    But the structure for column content doesn´t support something like URL.
    Any assistance you can provide is appricated, thank you in advance
    Andy

    there are possibilities like
    Define Columns
    Verwendung
    In this IMG activity you define columns and thereby specify the form, content, and function of each column.
    Note:
    Note that this view contains a customer namespace. Customer-specific entries must start with Y or Z.
    The following dependencies exist for entries in the PCD Service and FM for External Link fields:
    You must either fill the PCD Service and the FM for PCD Parameters fields, or only the FM for External Link field.
    If you fill all three fields, the system ignores the entry in the FM for External Link field.

  • How to maintain Employee photo in ESS who's who without sap_all and sap_new

    Hi ALL,
    Displaying Employee photo in ESS Who's who. it is working but with SAP_ALL and SAP_NEW user profiles.
    My requirment is without SAP_ALL and SAP_NEW user profiles. how it is working where can i maintain authorizations for this issue.
    The parameter i used are as follows:
    Business obj: PREL
    Doc type: HRICOLFOTO
    Personal num: 00000094
    Infotype: 0002
    Photo type: .JPG
    please help me.
    Regaards
    Satya.

    Dear satya .
    Please check the following
    1. Trace with the t.code ST01 and check that object require.
    2. The portal require the following obect:
    S_SERVICE
    S_RFC
    P_PERNR
    PLOG
    P_ORGIN/ P_ORGINCON
    P_HAP_DOC, if you work with Appraisal Document.
    3. Check the table T77S0
    P_PERNR, P_ORGIN, y P_ORGINGCON
    4. Check that you have the roles need for ESS.
    SAP_ESSUSER
    SAP_ESSUSER_ERP05
    SAP_EMPLOYEE_ERP05
    SAP_EMPLOYEE_ERP_13
    SAP_EMPLOYEE_ERP05_xx
    SAP_EMPLOYEE_ERP_13_xx
    5. Check the following notes:
    SAP Note 857431 - ESS: Authorizations and roles for WD services in ERP 2005
    SAP Note 844639 - MSS: Authorizations and roles for WD services in ERP 2005
    SAP Note 1373177 - Back end authorization roles missing in EHP4
    SAP Note 824757.
    [ESS Quick Start|http://www.cogentibs.com/pdf/cogsap08/ESS.pdf]
    Hope is help you.
    Regards
    consultor_ess_mss

  • Employee photo upload in portal and to be saved in infotype 0002

    Hi Everyone,
           I got an requirement where in ESS Portal, through "Change Own Data" link, employee is uploading his photo and it has to be saved in infotype 0002. Below are the doubts i have,
    1. There is no field for photo in infotype 0002, so how it will be saved in 0002.
    2. After uploading and clicking preview button, error was raising saying 'Error when archiving the photo'.
    3. I seen in many forums that the employee photo is visible from PA30. how it will be visible in that tcode ?

    Hi  Chris McNarney,
          Sorry for long delay for replying.. According to you,
    1. I checked the service under /default_host/sap/bc/conentserver/ it was activated and moreover below is the logon data,
            Client           500
         User             XXXXXX
         Language
         Password Status  Set
    and what is the use of this logon data..
    2. According to your link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false|https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false],
    there it has  4.7 version in that they told to create A2 repository with Tcode: OAC0 with details,,
         While creating the repository, keep the Document Area blank, Storage type as R/3 database, Rep. Sub-type will appear as Normal by default, Version No. as 0046 and in Contents table put 'SDOKCONT1' as the table name.
        With that screen im am not able to find table name field to put 'SDOKCONT1' as input and moreover SAP system database is there instead of getting R/3 database for storage type. Screen detilas below,
    Content Rep.    A2                               Active
    Description
    Document Area
    Storage type
    Version no.     0046   Content Server version 4.6 as the table name.

  • Employee Photo archieving in ESS_MSS

    Hi Guru's,
    I wanted to know whether the employee photo's uploaded in R/3 for PA10, PA20 and PA30 header part will also come in the Who's Who services in ESS and MSS.
    If not how to make it available in both with same links .
    Also let me know the steps to upload employee photo's ( mass upload ) in R/3 and /or in ESS/MSS.
    As from sdn  link I found the report - OA_UPLOAD_AND_LINK which is mentioned helpful , but when I ran why the file path is not open for search file .
    Kindly suggest.. and thanks in advance...

    Hi Alok,
    I wanted to know whether the employee photo's uploaded in R/3 for PA10, PA20 and PA30 header part will also come in the Who's Who services in ESS and MSS.
    If not how to make it available in both with same links .
    By using default config, ESS (Who's Who) and MSS (team information) take the photo from ERP in the same way like PA10, PA20 & PA30 tx.
    Just configure the photo display in ERP, and Portal will use this config.
    Also let me know the steps to upload employee photo's ( mass upload ) in R/3 and /or in ESS/MSS.
    There is a lot of post and blogs with the steps to upload photo one per one.
    For mass upload photo, you have to build a simple ABAP program.
    Both answers you can find it in this excellent wiki:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/AddEmployeePhotoonInfotype+0002
    Regards!

Maybe you are looking for