Employee qualification assignment IT0024 validity end date update

I Would like to change the validity end date value on one specific qualification assigned to an employee.
I can't do it using PA30. Is there anybody able to tell me how can I do it?
Thank you

You can't change endda because infotype 2 endda has to be '31129999'.
It's explicit here in this validation in module POST_INPUT_CHECK.
form check_it0002.   "form aus mppers00 hierher verlegt    "VLDN212840_2
if psyst-first eq yes and cprel-endda lt high_date.
*   I105(RP): Gültigkeitsende muß gleich & sein
    p0002-endda = high_date.                               "VLDN212840_2
    cprel-endda = high_date.                               "VLDN212840_2
    message e105(rp) with high_date.
endif.
if psyst-ioper eq modify.
    if cprel-endda lt high_date and pskey-endda eq high_date.
      p0002-endda = high_date.                             "VLDN212840_2
      cprel-endda = high_date.                             "VLDN212840_2
      message e105(rp) with high_date.
    endif.
endif.
endform.                    " check_it0002
high_date is a constant with value '99991231'.
Anyway, why would you want to change the endda on infotype 2 ?

Similar Messages

Query on extension of validity end date of Qualification - PD

Hi All,
I want to extend the validity end date of a qualification.
I tried T-code OOQA however the validity dates are greyed out .
Can anyone please help me with this?
Best Regards,
Kanika

It can be done using Tcode- RE_RHGRENZ4.
Thanks all...
Kanika

Validity end date tab is suppressed in scheduling agreement

Hi ,
In scheduling agreement , Validity end date tab is suppressed ,
There is no layout is assigned to the doc type & standart transaction varient is acitve , but while doing ME31L above field is not coming ( it is in suppressed / hide mode )
Please let me how to get that validity date tab in scheduling agreement.
Thanks,
Pradeep

Hi,
Go to SPRO > IMG > MM > Purchasing > Purchase Order > Define Screen Layout > NBF > Administrative data, header > make the fiels Validity Period field optional / Required.
Hope this will help you.
Regards,
Manish Jain

CIF of SA is not consistent for Validity End Date

Hello gurus,
Our company is quite new in using SNC, and we bumped into this problem (see description below), and hopefully this forum can help us.
<Description>:
When the Scheduling Agreement is CIFed from R/3 (ECC) to SNC, the Validity End Date does not get updated each time.
It gets updated sometimes, but not always. It is inconsistent behaviour.
<Example>:
Scheduling Agreement A
Validity End Date: 31.12.2012 Changed to 30.11.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
Correctly updated the Validity End Date in SNC.
For the same Scheduling Agreement A updated Validity End Date to 31.01.2013 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
For the same Scheduling Agreement A updated Validity End Date to 15.10.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
Thanks guys
Tuffy

Hi Tuffy,
1 - I am just wondering if after the Delete the existing External Procurement Relationship in SNC, and CFM1 and CFM2 the SA (i.e. changed my validity end date value) to the SNC, will the problem of the SNC side not able receive the changed SA??
When there is a change in the SA, integration model would create the same in SNC if it does not exist. But the transfer from ERP does not happen just like that. First, make sure that the message type (CIFSRC) has been checked in BD50 and then schedule a job to periodically transfer the SAs.
2 - What does the tcode the person in the SNC side have to double check to ensure the SA is transmitted there??
The t-code is /SAPAPO/MTI2 - External Procurement Relationship.
3 - Someone in our company advise BASIS team to check the transactions BD50 and BD52. What exactly does it mean and does it help?
This is correct. I mean guys who are responsible for Integration model need to set-up BD50, BD52 so that changes to SAs are transferred periodically.
Regards,
Sandeep

Validity start and Validity End date in PO

HI gurus
can you plz tell me how to activate validity start and Validity End date in PO
Neha

Hi,
It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
Thanks

Change validity end date on activity type

Is there a way to change the validity end date of an activity typre. Currently it is 9999 we would like to change it to 2011.
We would like to use a particular activity to cost current standards but dont want to use it for planned estimates that we will create for 2011. I am assuming if the validity ends in 2011 it will resolve the problem. I know we could create alternate routings and different production version but I am trying to avoid that and see if we can find a short cut.
Your help in this regard will be much appreciated

Hey Greta,
I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
Any ideas as to what is happening!!
Regards,

Validity end date is not getting copied from inquiry to quotation.

Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.

Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja

Validity End Date for A012 relation not updated

Hi All,
I am working on SRM5.0 and the HR org structure is replicated from ECC to SRM via idocs. Now, for one particular user, who holds position in 2 org units, the HRP1001 table data is incorrect.
For one of the relations A012 between S-O, the end date shown is in the past. I checked the ECC tables for this employee and the A012 relation is valid till 31/12/9999. But, in the SRM system, this date does not get updated.
Due to this employee is not shown as an approver for that particular org unit.
Does anyone know how I can update this date?
Regards,
Ancy

One of the Org unit is under the other org unit. So, I updated the position with the relation to the higher org unit only. So in the SRM system, by default, the supervisor for this org unit is the supervisor for the lower org unit too, unless there is a new supervisor for the lower org unit.

Date Validation - End date before Start date

This may be a very simple validation but I seem to be having trouble. I've got a form which requires a date range to be selected (Date Picker fields)...a Start date, and an End date.
I've created a Function Returning Boolean validation with the code as:
begin
if :P1_END_DATE < :P1_START_DATE then
return false;
else
return true;
end if;
end;This works 99%, except when the date range spans years.
For example, when I select '21-Dec-2010' in the start date and '4-Jan-2011' in the end date. The validation fails, and thinks the end date is before the start date.
Do I need to compare the year part of the date, before doing the rest? Or is the '<' not suited for this sort of check?
Edited by: djston on Dec 20, 2010 12:13 PM

Sorry, false alarm, it looks like I had my logic a little backwards :)

Workflow Substitutions - Force Validity End Date

Is there a way I can configure Business Workplace Substitution Validity date from and to dates to fall within a specific range? Can I prevent someone from using the default 12/31/9999 date when creating a substitute?

Hi Mark,
Well for starters a lot depends on:
a) What release/environment are you using?
b) What type of substitution - user to user or position to person are you using?
If you are using position to person, that's HR infotype A210 so you could use HR Structural Authorisations to only allow the infotype to be created e.g. up to the end of the current year.
If you are using user to user, its a bit harder. In that case its based on table HRUS_D2, which only checks the end date is a valid date.
So you would really have to code in an additional check from wherever you are maintaining the data.
So now the question is, how do your users maintain substitutions? i.e. in which release/environment? using which maintenance tool? Then you need to check out how that tool works.
E.g. you might be using the API SAP_WAPI_SUBSTITUTE_MAINTAIN or the table maintenance generated for HRUS_D2.
E.g. if its just the table maintenance view, you could add a table maintenance generation "event" with your additional check (go to the table maintenance generation and try menu Environment > Modification > Events).
Unfortunately the other maintenance tools use function modules - none of which currently offer any BADIs or user exits for adding additional checks. So at this stage it would be a mod. But a good thing to ask for in a development request perhaps.
Regards,
Jocelyn

Start and end dates update IW31 tcode

Hi
I have an requirement that when work order is released system should take the basic start date on the work order (AFKO-GSTRP) at the time of release and set the constraint “Must Start On” (AFVV-EINSA) for the 1st active operation (i.e. operation is not deleted) and set the basic start date as the date on the operation constraint (AFVV-NTANF).
i have found the exit (IWO10009 ),but my question is how can i update the basic start date as date of operation in Date tab.
is there any FM available for update?
Please help me.
Regards
Niru

Hi uirji,
There is an exclusive Enhancement for Release Conditions. This is IWO10002.
I have tested a code to suit to your needs.
DATA: LV_EINSA TYPE AFVV-EINSA,
LV_NTANF TYPE AFVV-NTANF,
LV_AUFPL TYPE AFVV-AUFPL.
SELECT SINGLE AUFPL FROM AFKO INTO LV_AUFPL WHERE AUFNR = CAUFVD_IMP-AUFNR.
SELECT SINGLE EINSA FROM AFVV INTO LV_EINSA WHERE AUFPL = LV_AUFPL AND APLZL = '1'.
SELECT SINGLE NTANF FROM AFVV INTO LV_NTANF WHERE AUFPL = LV_AUFPL AND APLZL = '1'.
IF LV_EINSA <> '1' AND LV_NTANF <> CAUFVD_IMP-GSTRP.
MESSAGE 'Release not possible due to Date condition for Operation1 not satisfied' TYPE 'I' .
NO_RELEASE = 'X'.
ENDIF.
As per this when your given conditions do not match, the following pop-ups would appear one after one and the RELEASE stopped.
Custom pop-up
Exit pop-up (No_Release)
When the user Saves the order with values EINSA = '1' (Must start on) and NTANF with GSTRP Date, and Release tried again, he will be successful.
In the above code, you may include field NTANZ (time field for NTANF) to match with time field of GSTRP, if you need.
Hope this post is of some help to you.
Jogeswara Rao K

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

How to input my own Validity Start and End Dates in ME21N

Hi All,
I have to change the Validity Start and Validity End date in Addiitional Data Tab of ME21 transaction( PO Create ) using default Customer Values.How Can i accomplish it?
I have used the BAdI ME_PROCESS_PO_CUST and implemented it, I have coded in the method PROCESS_HEADER.First I retrieved the data using get_data( ) method, changed the values with Customer Values and called the method set_data( ).
However my validity start and End Dates and not changing.
Even in ME21N if I create the PO with my own Validity Start and End dates, and go to ME23N to display the created PO, still in the additional data tab, the start and End dates are current date and Next date respectively.why its happening?
Thanks in advance

Hi,
Can you please let us know in which business scenario this is required.
SAP has provided separate functionality of Outline Agreement for considering validity period.
If you let us know the business scenarion some solution/workaround can be suggested.
Regards

End-date for EBS account for Re-hires

Hi Guys,
I am facing a weird issue.
We have configured EBS connector which is working fine for all new users. But in case of new hires, the END-DATE on EBS account is not getting changed. But it is getting changed on EBS process form. I did not see any errors in the log to trace the issue.
Please help me out.

locate the EBSUM jar,java class and method being called for this task and extract jar to verify the OOTB code, I don't remember exactly but this code issue. verify this using decompiler.
If you check the ootb updateuser method(ORCL_EBS_UM_9.1.0.7.0\lib\EBSUM\oracle\iam\connectors\ebs\usermgmt\integration\EBSUserManagement.jar), enddate pass as s7 and this is not being considered for update. this is bug with connector you can raise SR to oracle or try below( which I applied earlier)
write a java code to update end date directly into ebs database.
1. remove the existing adapter and attach your custom adapter where pass username,effective date to, ebs database login detail( already you have in the itresource pass the same here.
2. now write a java code and do below step
a) connect to database using normal sql connection
b) executeUpdate method to update end date ( update fnd_user where set eff_date_to=to_date(enddate,'format') where username=user) something like this.
before doing above login to ebs db using apps user and describe the fnd_user table and see the exact attribute name.
--nayan
Edited by: Nishith Nayan on Mar 16, 2012 1:51 AM

Updating Cube in the End Routine based on the incoming Valid From Date

Hello Experts
Here is my scenario.
We are using BW 7.x. There is DSO and from DSO it goes to the Cube, the promotions information. These data targets will have Material (Article), Plant (Site), Promotions Number, Valid from and Valid to dates. The Valid To date will come in as 12/31/9999 all the time.
If I receive a new record from ECC with same Material, Plat and Promotion combination again, I need to get the Valid From Date from the new record and Update the existing record' Valid To date in DSO/Cube as Valid From of the new record - 1.
So Valid To date of the existing record = New Record's Valid From date minus - 1.
I would like to do the update in "End Routine" of the Cube.
Would you please suggest if this can be done and if so would you please provide the sample code.
THANK YOU in Advance.
Nag.

yes, you can do this...
just use a RESULT_PACKAGE in end routine.
and using RESULT_PACKAGE fatch the existing records from DSO and append that into RESULT_PACKAGE after your desired changes,
just try to create a code using this l;ogic. if you can't then i will provide you a code.
Regards,
Ashish

Employee qualification assignment IT0024 validity end date update

Similar Messages

Maybe you are looking for