Change validity end date on activity type
Is there a way to change the validity end date of an activity typre. Currently it is 9999 we would like to change it to 2011.
We would like to use a particular activity to cost current standards but dont want to use it for planned estimates that we will create for 2011. I am assuming if the validity ends in 2011 it will resolve the problem. I know we could create alternate routings and different production version but I am trying to avoid that and see if we can find a short cut.
Your help in this regard will be much appreciated
Hey Greta,
I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
Any ideas as to what is happening!!
Regards,
Similar Messages
-
CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED
dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regardsDear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj -
Urgent-change the end date for a existing wage type.
Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated. -
CIF of SA is not consistent for Validity End Date
Hello gurus,
Our company is quite new in using SNC, and we bumped into this problem (see description below), and hopefully this forum can help us.
<Description>:
When the Scheduling Agreement is CIFed from R/3 (ECC) to SNC, the Validity End Date does not get updated each time.
It gets updated sometimes, but not always. It is inconsistent behaviour.
<Example>:
Scheduling Agreement A
Validity End Date: 31.12.2012 Changed to 30.11.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
Correctly updated the Validity End Date in SNC.
For the same Scheduling Agreement A updated Validity End Date to 31.01.2013 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
For the same Scheduling Agreement A updated Validity End Date to 15.10.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
Thanks guys
TuffyHi Tuffy,
1 - I am just wondering if after the Delete the existing External Procurement Relationship in SNC, and CFM1 and CFM2 the SA (i.e. changed my validity end date value) to the SNC, will the problem of the SNC side not able receive the changed SA??
When there is a change in the SA, integration model would create the same in SNC if it does not exist. But the transfer from ERP does not happen just like that. First, make sure that the message type (CIFSRC) has been checked in BD50 and then schedule a job to periodically transfer the SAs.
2 - What does the tcode the person in the SNC side have to double check to ensure the SA is transmitted there??
The t-code is /SAPAPO/MTI2 - External Procurement Relationship.
3 - Someone in our company advise BASIS team to check the transactions BD50 and BD52. What exactly does it mean and does it help?
This is correct. I mean guys who are responsible for Integration model need to set-up BD50, BD52 so that changes to SAs are transferred periodically.
Regards,
Sandeep -
Validity end date tab is suppressed in scheduling agreement
Hi ,
In scheduling agreement , Validity end date tab is suppressed ,
There is no layout is assigned to the doc type & standart transaction varient is acitve , but while doing ME31L above field is not coming ( it is in suppressed / hide mode )
Please let me how to get that validity date tab in scheduling agreement.
Thanks,
PradeepHi,
Go to SPRO > IMG > MM > Purchasing > Purchase Order > Define Screen Layout > NBF > Administrative data, header > make the fiels Validity Period field optional / Required.
Hope this will help you.
Regards,
Manish Jain -
Validity start and Validity End date in PO
HI gurus
can you plz tell me how to activate validity start and Validity End date in PO
NehaHi,
It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
Thanks -
Employee qualification assignment IT0024 validity end date update
I Would like to change the validity end date value on one specific qualification assigned to an employee.
I can't do it using PA30. Is there anybody able to tell me how can I do it?
Thank youYou can't change endda because infotype 2 endda has to be '31129999'.
It's explicit here in this validation in module POST_INPUT_CHECK.
form check_it0002. "form aus mppers00 hierher verlegt "VLDN212840_2
if psyst-first eq yes and cprel-endda lt high_date.
* I105(RP): Gültigkeitsende muß gleich & sein
p0002-endda = high_date. "VLDN212840_2
cprel-endda = high_date. "VLDN212840_2
message e105(rp) with high_date.
endif.
if psyst-ioper eq modify.
if cprel-endda lt high_date and pskey-endda eq high_date.
p0002-endda = high_date. "VLDN212840_2
cprel-endda = high_date. "VLDN212840_2
message e105(rp) with high_date.
endif.
endif.
endform. " check_it0002
high_date is a constant with value '99991231'.
Anyway, why would you want to change the endda on infotype 2 ? -
Short dump while changing the end date of infotype 0167 through PA30
Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_HRPA_VIOLATED_POSTCOND
Date and Time 11.03.2010 07:06:26
What happened?
The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
terminated.
thanks
shahidSearch OSS Notes for that.
-
CRM-ISU: Need to change the END date and Start Date for contract items
Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
ThanksHi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith -
T-code for changing valid to date
hi
is there any t-code other than MP01 to change Valid to date for MPNs?
Regards
SmithaHi,
I dont think , we can do it from other transaction code.
MP01 Maintain AMPL Records
MP02 Display AMPL Records
MPAD Delete archived materials from AMPL
Thanks,
Naveen Inuganti -
Query on extension of validity end date of Qualification - PD
Hi All,
I want to extend the validity end date of a qualification.
I tried T-code OOQA however the validity dates are greyed out .
Can anyone please help me with this?
Best Regards,
KanikaIt can be done using Tcode- RE_RHGRENZ4.
Thanks all...
Kanika -
Check the end date of activation of Adobe CC products
hello,
After installing Adobe CC on our Graphics stations, we can not authorize them to connect to the internet for security reasons ..
To know when to pass on machines (every 180 days with the team agreement), there is a file or key Register with this information.
The purpose is to pass on machines with a wireless key to reactivate the license, but for that I must know the end date of activation.
If you have an answer, I thank you in advance
cordiallyHi Emi
As Ravi rightly said, there is no such field..
Couple of possible ways
1. Check AW01N - Comparison tab - This can tell you in which Year the depreciation would end
2. Develop a Custom Query (SQ01) or Custom report based on Capitalizaion Date + Useful Life = End Date
Br, Ajay M -
Performance Management: Changing plan end date after publishing plan.
Dear experts,
I want to change my plan end date after publishing the plan. But there is no update option when i go to HR professional > Performance Management > Performance Management Plans > Query A plan > Update.
Kindly guide me.Change the End Date of Plan and Rebublish the Plan.
Thanks -
Validity end date is not getting copied from inquiry to quotation.
Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja -
Change employee End date validity Period
Hi all,
User is entered Validity Period wrongly.
Ex:- Entered as 08.01.2010 Instead of leaving dates as 31.12.9999
How can we change this..Hey Greta,
I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
Any ideas as to what is happening!!
Regards,
Maybe you are looking for
-
Question - Need Advice Regarding Second Hard Drive On HP Pavilion dv7t-4100 Notebook PC
Hi, I currently have a HP Pavilion dv7t-4100 Notebook PC, and my hard drive failed (luckily while still under warranty!). So I contacted HP support and they are in the process of sending me a replacement hard drive, so that I may install it. When I
-
Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box . Thanks all Merry Christmas!
-
I have the 15" PowerBook that Ilove, but for the life of me I haven't figured out two things that have to be so simple I am just overlooking them: 1) How do I use the "F" keys as that? For example, if I want to use the F3, pressing it only seems to m
-
InDesign CS4 Debug Application
Hi, Can anybody suggest how to get the InDesign CS4 Debug application? Thanks, Anil Yadav
-
My question is if JPA query language syntax allows full qualified class names in the SELECT clause of the query, e.g.: SELECT * FROM com.abc.Person This works well with Hibernate, but TopLink Essentials complains about the dots in com.abc.Person. In