Empty query cache with ABAP code

Hi Experts,
Is there any way to empty the query cache using ABAP code?
Thank you!
Regards,
Sam

Sam,
You can clear cache by using transaction RSRCACHE. Also, you can use a BDC ABAP program to do it.
-Saket

Similar Messages

Inner join Vs Outer join with ABAP code...?

Inner join Vs Outer join with ABAP code...?

Inner Join means, it will not select that recor at all, unless there is a matching entry in the second table.
suppose table VBAK INNER join table VBAP on VBAKVBELN = VBAPVBELN.
In this case, if there are no entries in VBAP, the header entry also will not show up.
But in case of OUTER JOIN, even if there is no items, it will show the header entry(VBAK) with blank columns for fields from item table.(VBAP)
here is one sample for inner join.
SELECT   A~EBELN
           A~EKORG
           A~EKGRP
           A~BSART
           A~LPONR
           A~LOEKZ
           A~LIFNR
           A~RESWK
           B~AEDAT
           B~WERKS
           B~MATNR
           B~MENGE
           B~EBELP
           B~ELIKZ
           B~PLIFZ
           B~PSTYP
           B~KNTTP
           B~MATKL
           B~ZZD_PLANT
           FROM EKKO AS A INNER JOIN EKPO AS B
           ON
           AEBELN = BEBELN
           INTO CORRESPONDING FIELDS OF TABLE T_DATA
           FOR ALL ENTRIES IN T_EKET
           WHERE
           A~EBELN EQ T_EKET-EBELN AND
           A~BSART EQ C_UBSTO      AND
           A~EKORG IN S_EKORG      AND
           A~EKGRP IN S_EKGRP      AND
           A~BSTYP EQ C_BSTYP      AND
           A~LOEKZ EQ SPACE        AND " Order not deleted
           A~RESWK IN S_RESWK      AND
           B~EBELN EQ T_EKET-EBELN AND
           B~EBELP EQ T_EKET-EBELP AND
           B~WERKS IN S_WERKS      AND
           B~MATNR IN S_MATNR      AND
           B~MATKL IN S_MATKL      AND
           B~LOEKZ EQ SPACE.           " Line item not deleted

SAP Query Custom Field with ABAP Code

Hi All,
I have a custom field in my SAP query which has some ABAP code under it. The code finally writes some value to a variable. My question is do i need to explicitly link the variable in the ABAP code to the custom field OR it's done automatically. For some reason i don't see any value for this custom field. Thanks.

Thanks Sandra

IDOC: How to create child segment with abap code.

Hi,
I'am trying to write an abap code to create segments for an Idoc which structure is the following:
ZLE_00060_DLVY
> E1EDL20
> Z1DEL_CONS
>Z1DEL_MAT_HEADER
> Z1DEL_MAT
> E1EDL20RET2
> E1EDL22
> E1EDL21
> E1EDL23
> E1EDL51
I receive a sintax error: Error in IDoc with status 26 .
Checking the result I note all segment at the same level and an error about the segment E1EDL22
EDI: Syntax error in IDoc (segment cannot be identified)
     Message no. E0078
Diagnosis
     The segment E1EDL22 does not occur at the current level of the basic
     type DELVRY05 (extension ZLE_00060_DLVY).
     This error can have several reasons:
     o   The segment E1EDL22 is assigned to a group whose header segment does
         not occur.
     o   The segment E1EDL22 does not exist in the syntax description of the
         basic type DELVRY05 (extension ZLE_00060_DLVY).
     o   The sequence of segments in the group in which the segment appears
         is incorrect.
     Previous errors ('mandatory' segment or group missing) may be due to
     this error.
Procedure
     Please check the IDoc or the syntax description of the basic type
     DELVRY05 (extension ZLE_00060_DLVY).
After the error I have:
data records
E1EDL20
Z1DEL_CONS
Z1DEL_MAT_HEADER
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
E1EDL20RET2
E1EDL22
E1EDL21
Abap code:
        idoc_data-segnam = 'Z1DEL_CONS'.
        idoc_data-sdata = s_z1del_cons.
        append idoc_data.
          idoc_data-segnam = 'Z1DEL_MAT_HEADER'.
          s_z1del_mat_header-tsegment = 'MATERIAL'.
          idoc_data-sdata = s_z1del_mat_header.
          append idoc_data.
        clear idoc_data-sdata.                            <<<<<<<<<<< how to indent the structure because this is a child.
         idoc_data-sdata = s_Z1DEL_MAT.
         idoc_data-segnam = 'Z1DEL_MAT'.
         append idoc_data.
         idoc_data-segnam = 'E1EDL20RET2'.
         idoc_data-sdata = s_E1EDL20RET2.
         append idoc_data.
         clear idoc_data.
         idoc_data-segnam = 'E1EDL22'.
         idoc_data-sdata = s_e1edl22.
         append idoc_data.
         clear idoc_data.
         idoc_data-segnam = 'E1EDL21'.
         idoc_data-sdata = s_e1edl21.
         append idoc_data.
Any help will be well appreciated.
Thanks in advance.
Regards,
    Giovanni

Hi,
following in debugging mode the abap code of the INCLUDE ZXTRKU02 where is defined the TABLES IDOC_DATA STRUCTURE EDIDD, I find that all field of the table IDOC_DATA are not set. More exactly my expectation is to find values for SEGNUM, HLEVEL, PSGNUM.
In a few words I need to execute an enhancement, via abap code, of the struscure of the idoc before sending it out since I have a requirement to test this enhancement in my XI environment, receiving as input this ideoc modified.
Then, I need to add a new segment and one child.
Any suggestion will be well appreciated.
Thanks in advance.
Regards,
    Giovanni

Problem with abap code in lsmw.its urgent

Hello guys iam migrating open ar line items using lsmwand i need to create reconciliation key automatically so iam using below code which is working fine in abap editor but i inserted in the lsmw abap code block at step 5 mapping fields iam getting error as that function module does not exits .can any body go through the code and give me suggestion.your will be greatly appreciate.
types: begin of ty_fikey,
       fikey type fikey_kk,
       resob type resob_kk,
       end of ty_fikey.
data: wa_fikey type ty_fikey.
CALL FUNCTION 'FKK_FIKEY_CHECK'
EXPORTING
    I_FIKEY                      = 'jana56481'
I_OPEN_ON_REQUEST            =
I_OPEN_WITHOUT_DIALOG        =
I_FOR_MASS_POSTING           =
   I_RESOB                      = '24 '
I_RESKY                      = ' '
I_NON_EXISTING_ALLOWED       = ' '
I_FOR_POSTING_IN_UPD         = ' '
EXCEPTIONS
NON_EXISTING                 = 1
OTHERS                       = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
select single fikey resob from dfkksumc into corresponding fields of wa_fikey where resob = '24'.
e1bpdfkkko-fikey = wa_fikey-fikey.
Regards
Janapathi

Hi,
Refer link:
<a href="http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc">http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc</a>
Pls do reward points.
Regards,
Ameet

Problem in continuous query cache with PofExtractor

Hi,
I am creating a CQC with a filter having PofExtractor. When I try to insert any record in cache it is giving me exception at server side.
When I do not use PofExtractor it is working fine.
If any one know about this prblem please help.
I am using C# as my client application
Regards
Nitin Jain

Hi JK,
I have made some changes in my server. Now I am not using any pof definition on server side. I think that's why it is giving me the error.
2010-04-13 15:39:07.481/20.593 Oracle Coherence GE 3.5.1/461 <Error> (thread=DistributedCache, member=1): Exception occured during filter evaluation: MapEventFilter(mask=INSERTED|UPDATED_ENTERED|UPDATED_WITHIN, filter=GreaterEqualsFilter(PofExtractor(target=VALUE, navigator=SimplePofPath(indices=0)), Nitin)); removingthe filter...
2010-04-13 15:39:07.481/20.593 Oracle Coherence GE 3.5.1/461 <Error> (thread=DistributedCache, member=1):
(Wrapped) java.io.StreamCorruptedException: unknown user type: 1001
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:261)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ConverterFromBinary.convert(DistributedCache.CDB:4)
at com.tangosol.util.ConverterCollections$ConverterMapEvent.getNewValue(ConverterCollections.java:3594)
at com.tangosol.util.filter.MapEventFilter.evaluate(MapEventFilter.java:172)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.prepareDispatch(DistributedCache.CDB:82)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.postInvoke(DistributedCache.CDB:10)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.put(DistributedCache.CDB:156)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onPutRequest(DistributedCache.CDB:37)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$PutRequest.run(DistributedCache.CDB:1)
at com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheKeyRequest.onReceived(DistributedCacheKeyRequest.CDB:12)
at com.tangosol.coherence.component.net.message.requestMessage.distributedCacheKeyRequest.ExtendedKeyRequest.onReceived(ExtendedKeyRequest.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.StreamCorruptedException: unknown user type: 1001
at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3289)
at com.tangosol.io.pof.PofBufferReader.readObject(PofBufferReader.java:2600)
at com.tangosol.io.pof.ConfigurablePofContext.deserialize(ConfigurablePofContext.java:348)
at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2673)
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:257)
... 15 more
Is there any way by which we can apply continuous query cache without providing object definition at server side?
Regards
Nitin Jain

Please help me with ABAP code

Hi Gurus,
Please help me with the code.
Algorithm: This is for master data extraction. I need to append some records to I_T_DATA before the loop on I_T_DATA begins.
ZTAB is a custom defined table with key KEY. STAB is standard table with key KEY.
1. Create an internal table I_T_STAB similar to STAB.
2. Loop at I_T_DATA
    Read record from ZTAB where KEY = I_T_DATA-KEY and { field1 <> I_T_DATA-field1 or field2 <> I_T_DATA-field2 <> field3 <> I_T_DATA-field3}
If success
     Delete record from I_T_DATA.
Else
     Continue loop.
Copy all records of STAB to I_T_STAB.
3. Delete records in I_T_STAB where I_T_STAB-KEY = ZTAB-KEY.
Now
4. Delete all records in I_T_DATA where I_T_DATA-KEY = I_T_STAB-KEY.
Now,
5. Append all the remaining records from step 3 in I_T_STAB to I_T_DATA.
Please help me with the code upto this part.
Now the actual code in exit starts.
Loop at I_T_DATA
Thanks,
Regards,
aarthi
[email protected]

You might get a quick answer if you were to post in the ABAP forum.
Moderator, please move to ABAP forum. Thanks.
Regards,
Rich Heilman

Help with abap code in Transformation

Hi Experts,
we have a scenario where we load delta data from an DSO into a Cube.
The records in the DSO looks like below.
Location as (L)
WorkOrder as (W)
Startdate(DDMMYYYY)/time (HH:MM:SS) as (S)
Finishdate/time as (F)
L1
W1
21/04/2009/10:00:00
21/04/2009/12:00:00
L1
W2
21/04/2009/14:00:00
21/04/2009/23:00:00
|| L1 ||W3|| 21/04/2009/16:00:00 ||21/04/2009/20:00:00 ||
Total time ( April 2009 ) for above Location L1 should be calculated as a difference between W1 and W2 since W3 is a overlapping record. So the result would be 13 Hrs. Work Orders are summarised, so we dont need work order info in the output.
Can you experts help me with the code to implement??
Thanks,
DV

For each location, for example L1, move the records to an internal table itab.
sort itab by startdate.
read table itab index 1.
You will get the first value.
sort itab by finishdate descending.
read table itab index 1.
you will get the second value.
Calculate the difference and populate it to the internal table.
finally modify the source package.
I have just given the logic. I hope you can build upon this.
I hope it helps.
Thanks.

Link BOR Event with ABAP code (program or function)!

Hello experts,
I am trying to link program or function to bor event. Change of data in HR IT0002 trigger event CHANGE of PERSDATA Object. I need to execute some ABAP code (program or function) on CHANGE event, so I have to link event and ABAP code.
Question: is it possible and how?

Hi,
It is very much possible....
You can use the Workflow & use BO as PERSDATA & this workflow can be triggered on event change.
& You can write your code ...
Regards,
Rahul

Plott one data serie on a secondary axis with ABAP code

Hello to all from Portugal.
I´m using for the first time the functionality of the graphics is SAP.
I want to plott one data serie on a secondary axis by ABAP code but I´m having some difficulty.
The following SAP help site describes what I intend to do: http://help.sap.com/saphelp_nw04/helpdata/en/0b/ac553bf3a76258e10000000a114084/frameset.htm
The standard program GFW_DEMO_PRES1 is an good example.
Someone can help me in that case? How can I format an Data Serie in the secondary axis in ABAP code?
Thanks and regards.
Bruno

hi
good
go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f1/0a551ce09411d2acb90000e829fbfe/frameset.htm
thanks
mrutyun^

Querying cache with data that is large enough to fit into available memory

Query on a cache would be applicable on the data that can fit into the cache storage as per the link http://coherence.oracle.com/display/COH35UG/Query+the+Cache. However there is also a mention about restricting the cache content along a specific dimension, so that the query actually knows what to expect from the cache.
Generally any enterprise application would generate huge amount of data and practically it would be difficult to set the fix up the limit to a specific dimension. Fixing the limit is to decide on what else has to be taken from the persistent store.
Please let me know if there are best practices defined in this regard?
Edited by: Mahesh Kamath on Feb 5, 2010 3:16 AM

Hi,
Thanks for the clarification.
Okay. So in a nutshell it sounds like you have data spanning a memory cache and living in a database and
you want to be able to query the entire dataset, so you need someway to figure out what
is in the cache and what is in the database?
In general queries in Coherence only work against the cached data, and because of the LRU characteristics
of memory caches its going to be really difficult to know at a point in time what set of information is living
in memory and which has been evicted and persisted in the underlying database. If the dataset that spills
over into a database is fringe (i.e. a small percentage of your total data), then the simplest solution is to
add new cache servers to get you out of this problem (i.e. avoid databases). If the cache is just the tip
of the iceberg of all your data than you probably want to have either a write-through or write-behind
configuration and query the database directly (write-through will get you everything you put into a cache,
while write-behind will get everything except for the most recent puts which are working their way to being written in batch).
My guess is that retrieval of keys out of the database, and then retrieval of data through the cache using
the keys would not be a good idea. For one thing if the database is substantially larger than the cache,
the entire cache will get evicted by the query activity, which generally is a bad idea. More importantly the
code path to get the data will be much longer and would result in N number of invocations of SQL as opposed
to a single invocation of SQL with a cursor.
Regards,
Bob

Run a macro with ABAP code

Hi everybody,
Could someone help me finding a way to run a macro of an excel sheet with an ABAP program.
Explanation:
- I launch an abap program that opened an excel sheet with that kind of code
include ole2incl.
DATA : w_excel   type ole2_object,
           w_books   type ole2_object,
           w_book    type ole2_object,
           w_sheets type ole2_object,
           w_sheet   type ole2_object,
           w_cell    type ole2_object,
           w_rows    type ole2_object,
           w_font    type ole2_object.
create object w_excel 'Excel.Application'.
CALL METHOD OF W_EXCEL 'WORKBOOKS' = W_BOOKS.
CALL METHOD OF W_SHEET 'CELLS' = W_CELL
       exporting #1 = row
                 #2 = column.
CALL METHOD OF W_SHEET 'SAVEAS'.
With my ABAP program:
- i can open my excel template.
- i can write and format data inside my excel sheet.
- i can close and save my excel sheet.
but i don't how to run the macro that exists in my excel template.
Thank you in advance.

Hi,
Executing Excel Macro from SAP ABAP
I am populating data in excel sheet using OLE. This excel document contains Macro.
Is there any way I can start execution of Macro as soon as data is populated in Excel sheet.
If you are using OLE to populate the Excel Sheet then, then yes you can run a macro.
CALL METHOD OF OBJ_EX_APP 'Run'
       EXPORTING #1 = MACROSTR.
Adding a Field Exit
To add a field exit first find the data element that is linked to the screen field- the screen number and program
Run program RSMODPRF. You will need to create two function modules one FIELD_EXIT_MEPO_VENDOR and
FIELD_EXIT_MEPO_VENDOR_A
FIELD_EXIT_MEPO_VENDOR should have code simply of input = ouput.
FIELD_EXIT_MEPO_VENDOR_A should have the code for whatever the functionality is required
Go back to RSMODPRF and run the program without parameters. Use the push buttons to assign the screen, 'A' and program. Use the drop down to activate the field list.
This should now work, but there is no way of debugging. For further information look at OSS 29377
program zzdirlist.
for AIX this method also works.
DATA: BEGIN OF TABL OCCURS 0,
      TEXT(80) TYPE C,
      END OF TABL.
DATA: COMMAND(256) TYPE C.
COMMAND = 'ls'.
CALL FUNCTION 'RFC_REMOTE_PIPE' DESTINATION 'SERVER_EXEC'
EXPORTING COMMAND = COMMAND
READ = 'X'
TABLES PIPEDATA = TABL.
LOOP AT TABL.
   WRITE:/ TABL-text.
ENDLOOP.
Open the following link,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Regards,
Jagadish.

Bex Query- Use of ABAP code in Calculated Keyfigure/formula

Dear Experts.
I am wondering if there is any way to use ABAP in the formula editor of the Bex Query desinger.
I have to build a report with very complex formulas (a lot of key figures, comporations, If then else ) an I think it would be easier to build all then in ABAP.
So what I am looking for is any kind of user-exit/Badi that allows to calculate a Calculated Key figure/fomula in ABAP with the same data that is availabe in the fomula editor.
If SAP is not providing this, this is clearlly a must for next releases.
Thanks a lot and best regards,
Alfonso.

Dear Ananda.
Thnaks for your reply, but could you please extend your answer a little bit more?
As far as I know, Formula customer exit variables are only called once and they don´t provide the rest of the keyfigures and characteristic use in the drilldown level, so for my needs they are useless.
Regarding IF-then-else statement in the formula, I already know about it. Actually what I am trying to avoid is to use them. In order to build my query I might need to build really big formulas with a lot of If-then-else, making it quite complex what the formula is doing. This is the reson I want to do it on ABAP.
Please any other ideas?
Thanks a lot.

Error : in placement of Macro with ABAP code

Hi,
I have to replace the Macro rp-provide-from-last for 0105 infotype with subtype 05 and pn-begda ,pn-endda.please send me the code.
thanks in advance.
bye
raj.

Write as :
sort p0105 by pernr SUBTY begda descending.
loop at P0105 where SUBTY = '05'
                     and    endda >= pn-begda
                     and    begda <= pn-endda.
   i_p0105 = p0105. <----
endloop.

Help with ABAP code in CMOD.

dear all,
can you help me solve the below abap coding problem? thanks.
somewhere at the top
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE E_T_RANGE.
      LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
        FIND l_s_var_range-vnam IN TABLE it_vnam.
        IF sy-subrc = 0.
          l_check = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
Error message...
"L_S_VAR_RANGE" cannot be converted to the line type of "I_T_VAR_RANGE".
Thanks all.

Hi Try this,
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE LINE OF I_T_VAR_RANGE .
LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
        FIND l_s_var_range-vnam IN TABLE it_vnam.
        IF sy-subrc = 0.
          l_check = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
Regards,
Ravi

Empty query cache with ABAP code

Similar Messages

Maybe you are looking for