Empty 'remote-media-address' field in CDR on IOS router

Hello community,
We have CISCO2911-V/K9 with c2900-universalk9_npe-mz.SPA.153-3.M.bin
CDR file accounting is configured:
gw-accounting file
primary ftp 192.168.1.1/ username test password test
acct-template callhistory-detail
maximum fileclose-timer 65
CDR files are regulary flushed to FTP server. But 'remote-media-address' in sip calls records are '0.0.0.0'.
In other side 'sh call hist voice' gives correct information about remote voice gateway IP addresses.
What can be the cause of problem?

Try using webvpndomain.com/myVPNGW as host

Similar Messages

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

Preventing empty rows in address formats

Hallo everyone!
I'd like to know if there is a method to prevent SBO2005A from printing empty rows in the address fields when for instance there is missing county in BP addresses like this:
I have defined an address format that goes
Block
County
Street
ZipCode | Freetext(" ") | City
We use Block as "Name2" and County as "Name3" in master data just in case the customer wants to use additional names for his BPs.
If I use the "Block" - field and I leave the "County" - field blank it prints an empty row between "Block" and "Street". This is not the behaviour I would like to see. In case "county" is missing I would rather see something like this in a printout:
Block
Street
ZipCode | Freetext(" ") | City
So, is there a method to force this? or any workaround?

Hello Patryk,
PLD does not offer the functionality to control the blank lines in an address field. I would suggest you use a formatted search in your address field on the marketing document and have it formatted in the document itself before you print.
Please see sample code for your requirment for the Ship to address. If you want this to applied to the Bill to address field then you have to slight alter the query by cha
For Shipto address formatting
SELECT CASE WHEN T0.Block IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.Block + CHAR(13) + CHAR(10) ELSE '' END +
CASE WHEN T0.County IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.County + CHAR(13) + CHAR(10) ELSE '' END +
ISNULL(T0.Street, '') + CHAR(13) + CHAR(10) + ISNULL(T0.ZipCode, '') + ' ' + ISNULL(T0.City, '')
FROM [dbo].[CRD1] T0 WHERE T0.AdresType = 'S' AND T0.Address = $[$40.0.0] AND T0.CardCode = $[$4.0.0]
For Billto address formatting
SELECT CASE WHEN T0.Block IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.Block + CHAR(13) + CHAR(10) ELSE '' END +
CASE WHEN T0.County IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.County + CHAR(13) + CHAR(10) ELSE '' END +
ISNULL(T0.Street, '') + CHAR(13) + CHAR(10) + ISNULL(T0.ZipCode, '') + ' ' + ISNULL(T0.City, '')
FROM [dbo].[CRD1] T0 WHERE T0.AdresType = 'B' AND T0.Address = $[$226.0.0] AND T0.CardCode = $[$4.0.0]
Suda

Email link with no address field.

Greetings~
I'm trying to make a button that when clicked on opens an email client with an empty address field but a filled subject and body, but have no idea where to begin.
The idea is that I have a "Refer me to your friends!" button, so when the user clicks it, it opens an email with the subject "Sairus is awesome" and a body filled with propaganda. The address field must remain blank so they can add in the friend's address they wish to send.
For the moment I'm working with the below, however obviously enough the address is being filled in. Hoever, despite the seemingly correct code, the subject and body are remaining empty. I'm using Flash 8, is the syntax different in my version?
on (release) {
getURL("mailto:[email protected]?subject=Sairus is awesome&body=The following 50 reasons explain why Sairus is awesome:");

I've been testing it on a server all the time ( http://www.brightwork.com/~staging2/info ) to no avail. Of course now that I've made a forum post about it, the link is populating an email grand without any changes.
However, my main problem is still there, how does one make an email with an empty "to" field?

Request to eliminate blank address fields (ie: BLOCK) in Ship To & Bill To

When configuring the Address Formats (Setup>Business Partner), if the Street field is selected for line one of the address field, the Block field is selected for line two of the address field, and City is selected for line three of the address field - and the Block field is blank (which happens quite often) then the address field created by SAP for printing on documents will have a blank line on the second row of the printed address.
Most customers do not like this (some even go to the extent of modifying the address to remove the blank line); therefore we would like SAP to include some logic that would eliminate the blank line if the BLOCK field is empty.
Do other partners have the same issue?

Thanks for your reply. The issues that our customers complain about are the way the addresses print in the standard PLD documents, which all use the pre-formated block of text that SAP creates. Unfortunately there is no way to change this text block.
A couple of years ago, as per your suggestion, I attempted to create my own special text block by concatenating the various address lines, but then I ended up with some custom stuff, which is not ideal even if I could have gotten it to work properly - something that I was not successful at achieving.
I think that the proper solution is for SAP to make thier address assembly routine just a little bit smarter by not using the "BLOCK" field if it is empty.

Formatting Address Fields into one

Using Acrobat X PRO:
I have a multi-page document in which a user is prompted for the address in two different formats:
1) With the address split into 4 different values/fields:
Street Field, City Field, State Field, Zip Field
Example: "1234 Count Rd" (Next Line) "St Louis", "MO" "55555"
2) With the address all together:
Complete Address on one line with a maximum length of 40 Characters.
Example: 1234 Count Rd, St. Louis, MO 55555
I would like users to be able to Fill in the Street, City, State, and Zip fields, and no matter what the format of the following fields, have the data autopopulated.
This isn't a problem for example #1. However, with #2 if i place all fields close together, I have to guess on how far apart to space each field and still have it fit and format properly.
Is there any way to combine the values of 4 fields into one value (separated by commas)?
Making the address field 'auto-fit' may be necessary but it's ugly if there is extra space in the remaining fields.
PLEASE SEE THIS EXAMPLE document i have created for the purpose of this post

And if the combined fields are longer than 40 characters?
With Acrobat 4 there was a sample form that one entered the data in fields like tile, first name, mi, last name, abd degrees and then created a full name from those individual fields and adjusted for missing data.
The doucment level script:
/ Concatenate 3 strings with separators where needed
function fillin(s1, s2, s3, sep) {
Purpose: concatenate up to 3 strings with an optional separator
inputs:
s1: required input string text or empty string
s2: required input string text or empty string
s3: required input string text or empty string
sep: optional separator sting
returns:
sResult concatenated string
// variable to determine how to concatenate the strings
var test = 0; // all strings null
var sResult; // re slut string to return
// force any number string to a character string for input variables
s1 = s1.toString();
s2 = s2.toString();
s3 = s3.toString();
if(sep.toString() == undefined) sep = ''; // if sep is undefined force to null
assign a binary value for each string present
so the computed value of the strings will indicate which strings are present
when converted to a binary value
if (s1 != "") test += 1; // string 1 present add binary value: 001
if (s2 != "") test += 2; // string 2 present add binary value: 010
if (s3 != "") test += 4; // string 3 present add binary value: 100
/* return appropriate string combination based on
calculated test value as a binary value
switch (test.toString(2)) {
case "0": // no non-empty strings passed - binary 0
     sResult = "";
break;
case "1": // only string 1 present - binary 1
     sResult = s1;
break;
case "10": // only string 2 present - binary 10
     sResult = s2;
break;
case "11": // string 1 and 2 present - binary 10 + 1
     sResult = s1 + sep + s2;
break;
case "100": // only string 3 present - binary 100
     sResult = s3;
break;
case "101": // string 1 and 3 - binary 100 + 001
     sResult = s1 + sep + s3;
break;
case "110": // string 2 and 3 - binary 100 + 010
     sResult = s2 + sep + s3;
break;
case "111": // all 3 strings - binary 100 + 010 + 001
     sResult = s1 + sep + s2 + sep + s3;
break;
default: // any missed combinations
     sResult = "";
break;
return sResult;
And then one could use a custom calculation script for a full address field:
// Full business address including country
function doFullBusinessAddress() {
var ba = this.getField("business.address.full");
var bc = this.getField("business.address.citystatezip");
var bu = this.getField("business.address.country");
event.value = fillin(ba.value, bc.value, bu.value, ", ");
doFullBusinessAddress();

Email address field

Hi all,
i want to place email address at header window on my script.
i get all address detials in ADRC table, but i could not find email id field,
can you please help me.
thank you.
REgards
Ramesh

ADR2 Telephone Numbers (Business Address Servi
ADR3 Fax Numbers (Business Address Services)
ADR4 Teletex Numbers (Business Address Service
ADR5 Telex Numbers (Business Address Services)
ADR6 E-Mail Addresses (Business Address Servic
ADR7 Remote Mail Addresses (R/3 - R/3; Busines
ADR8 X.400 Numbers (Business Address Services)
ADR9 RFC Destinations (Business Address Servic
ADRC Addresses (Business Address Services)
ADRG Assignment of Addresses to Other Address
ADRP Persons (Business Address Services)
ADRT Communication Data Text (Business Address
ADRU Table for Communication Usages
ADRV Address Where-Used List (Business Address
from : Re: SAP table which has address details

Address Field Hidden or Collapsed

When I open Safari, the address field (field where you type the url you want to go to) and the Google search bar is missing. It was there one moment, gone the next.
I can get it to show up temporarily by clicking "File>Open Location" but once it goes to the new address, they again disappear.
When I try to customize the toolbar by clicking "View>Customize Toolbar", both the address field and google search field shows up in the normal position even BEFORE I drag a new one of each to the toolbar. Once I drag them and then close the Customize window, the Window goes back to simply showing my bookmark shortcuts in the bar (Bookmark Bar) and the red, yellow and green buttons in the top left-hand corner along with the address of the page I'm currently on.
Firefox is working fine.
Any ideas, please help. I've read other posts here and don't see an answer to my problem.
Thanks,
WCW

Thanks Barry. I had the same problem, and your suggestion worked immediately. I didn't have to re-boot the computer, only re-start Safari.
Before finding your suggestion, I had spent close to half an hour looking through Apple's Safari Help on my computer and online without finding anything remotely helpful.

Address field data is not getting dispalyed in company details

Dear All,
After filling up the necessary details in the Administration->system initialization->company details->general tab->Local language for the address of the company.
I am not getting the address displayed in the Address field.
I have filled all details in street,block,building,city,zip code,state,country.
But still i am not getting anything displayed in the address field.
Kindly help me in resolving this issue.

Open Administration -> Setup -> Business Partners -> Address Formats Window.
Check if you have the address format for the Country available in this window

How to make the Shipping address field on an Account as a required field?

Hi,
The requirement is that there has to be a shipping address specified for each Account that is being created.
I tried to set the 'shipping' address field to 'required' in Account field setup, but the required checkbox is disabled, neither can I do it from Account Page layouts since there also its the same case.
Does anyone know if its possible to do this and how?
Regards,
Ani.

Have you tried to add validation to the AccountName field
[<PrimaryShipToStreetAddress>] IS NOT NULL - will test to see if there is a value in the Shipping Address 1 field

F4 help for address field

Hi,
In BP_CONT component, for address field I need to provide F4 help. And the F4 should contain the addresses with separate fields as (city.street,country).On selecting the row the data should flow as concatenated manner to the address field.
Please provide some idea to achieve this.
Thanks.

Hi Ginger,
I would like to add what Vinamra has said, you need to create a search help through se11 transaction. As per your requirement you need to map address field of the selected row to different fields in UI.
In search help we have IMPORTING(IMP) and EXPORTING(EXP) Fields or parameter.
Lets take a simple example, suppose you have three address field house no, street and city. Now you would like to apply F4 help on CITY field so you need to choose CITY field as IMPORTING and EXPORTING parameter in your search help and other fields like HOUSE NO and STREET as EXPORTING parameter only.
Now following code you need write in GET_V_CITY() method
DATA:
   lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
   ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
   lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.CITY'.
   ls_map-f4_attr      = 'CITY'.
   APPEND ls_map TO: lt_inmap, lt_outmap. " map to input and out
ls_map-context_attr = 'STRUCT.HOUSENO.     " Context node attribute
ls_map-f4_attr      = 'HOUSE_NO'.                    "corresponding Field in search help
APPEND ls_map TO: lt_outmap.
ls_map-context_attr = 'STRUCT.STREET.     " Context node attribute
ls_map-f4_attr      = 'STREET'.                     "corresponding Field in search help
APPEND ls_map TO: lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZSH_ADDRESS'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
May this will help you.
Regards
Ajay

How to visit a pasted url in address field?

This may seem a naïve question:
Some background: I have never used Safari before. I have just installed *Safari 5.01* for Windows on my *Windows 7 PC*, and when I *+copy and paste+* an url for a particular existing web page into Safari's address field (which url loads successfully in Firefox, Opera, and IE ), I find I have no *go to* or load arrow, or other means, such as pressing enter or return, to make the browser load the pasted address. When I press Ctrl+L nothing happens, whether from the drop down menu at File: *Open Location...* or as a double keyboard command.
And so I resorted to importing a bookmark for the address from IE, and then Safari loaded it successfully.
Can I not just copy and paste addresses into Safari's address field and have a *+simple next step+* to load the page as I can with IE, Firefox, and Opera ?
I tried typing part of the address in manually for Safari's autocomplete to find it, but it wouldn't find the address, which is very new, but does exist, and as I have said, loads in the other three browsers with a simple paste and enter. This *+copy and paste+* method happens to be a very convenient means of loading some sites, with only one option being available, that is the exact address, rather than possibly several options that are offered up as one types part of the address, which have to be looked at and chosen from.
Any assistance will be appreciated.
Thanks … allaniam

*I confirm a similar bug exists on Safari 5.0.2 for Windows, running on a 32bit Windows XP SP3.*
Description
1. You copy an URL, not matter how you copy it (copy the URL text, or from another browser address bar, or from a webpage using the contextual menu "Copy Link", and etc)
2. When you try to paste in the Safari address:
===(i) if you use keyboard shortcut Control-V to paste in the URL, and press ENTER - everything is normal, meaning you will leave your previous webpage and go to the new page with that URL you pasted in using Control-V
===(ii) if you right click on the Safari address bar, invoke the contextual menu that popups from there, and choose "Paste" from the menu,and then hit ENTER after you paste in the new URL:
*======(A) the new URL you pasted in will disappear.*
*======(B) the old URL before your paste, will re-appear in the address bar.*
*======(C) the cumulative effect this operation will be the same that you reload the previous page.*
This is the symptoms on 32bit Windows.
*It seems in the current build of Safari for Win, "Paste" command from a menu denotes something different from its shortcut "CTRL-V".*
This is a very weird thing.
Just for the record, Safari 5.0.2 on Mac OSX 10.6.4 doesn't share the bug.
*By the way, I have also surveyed the exactly version and build numbers for both the Safari versions:*
Safari 5.0.2, build 7533.18.5: on WinXP 32bit
Safari 5.0.2, build 6533.18.5: on Snow Leopard.

I can no longer see the address field in safari, can anyone help?

I can no longer see the address field in safari, can anyone help?

Abarryseymour
That didn't work to get the safari address bar and the google search bar on my safari browser. could I have a virus???
Which OS, which Safari?

How to make ship to address fields mandatroy while creating sales order

Dear forum Members,
My client oraganizes trade shows and hence ship to address vries everytime when sales order is entered for the same sold to party.So one times ship to customer is used in the sales order and address is entered at sales order level. Please note that at master data level all address fields are suppressed for one time customer.Hence there is no question of going back to one time customer account group and making any field mandatory.
While changing address for ship to at order level, there are few fields which are mandatory, for example city is mandatory. I also want to make zip code and region as mandatory.where is this controlled?Please note that this is not account which controls this. i have already done lot of r&d on account group and transaction variants which are not controlling these fields at sales order level.

Hi Kanwal,
Only incompletion procedure will not suffice for your requirement.
You need to make the field mandatory wherein, if you dont enter, system will not allow you for enterin further fields. For this you should do the following:
Goto transaction SHD0, you will get a screen where you need to enter you Tcode "VA01"
Below you define a transaction variant (starting with Z).
On the next tab you have Screen Variant. Here you enter screen variant name, program name & screen number.
Then you click on create.
Its like as if you are doing some kind of recording. Finally you will reach to the screen where there are options available to make the field mandatory.
For your reference the program is SAPMV45A screen number is 4001.
Further screen are self explinatory.
Hope this should solve your requirement
Regards,
Dhananjay

URL request in the address field on the browser

A few of URLs in my application are only restricted to the web master. Before creating the special user role of the application, I would like to access those URLs through the address field on a browser. The problem I have is that a URL entered on the field will lead to a creation of a new session even though I enter a URL with the current jsessionid of TC. Is a way to prevent a creation of a new session?
Thanks.
v.

When I test on URLS. they show up in the address field with a jsessionid. I believe that is due to cookies disabled. Otherwise, the jsessionid wouldn't show up. But, when I check out the cookies setting on both Firefox and IE, they are enabled. I am not sure what is going on in this regard.

Empty 'remote-media-address' field in CDR on IOS router

Similar Messages

Maybe you are looking for