Enable "save as draft"

Does anyone know how to enable "save as draft" for a form in workspace?

What is the type of your input form variable?
For me, XFAForm renders with save in draft folder option enabled; but DocumentForm is not. Just make sure to have an XFAForm type.
-Nith

Similar Messages

  • Adobe LiveCycle Workspace "Save as Draft" option

    Hi,
         I have XDP form designed using Adobe Form Designer 9.0.0.2 which has WSDL Data connections to fetch data from database to populate the form. This form has to be displayed in workspace for completion process with Reader Extension (Database and Web service Connectivity).  But when I display this form with Reader Extension in workspace I can see only complete button, save and offline button as not available.
    I have a requirement to complete the form to initiate the Process – by pressing complete button which is working fine.
    But to save the form to the initiator’s draft folder there is no save button available how to enable “save as draft” option for the above mentioned form.
    Regards,
    Chalukya.

    Hi Jon,
    Thanks a lot for your responce.
    I am submitting my form as XDP.
    Let me brief you –
    When I am submitting my form as XDP without any Reader Extensions Applied to it then I
    can see all three buttons : Complete, Save and Offline, in Workspace.
    But as I apply Reader Extension (Database and Web service connectivity) and submit as XDP
    then I can see only Complete button and not Save and Offline buttons.
    Regards,
    Chalukya.

  • BB is not giving me option to send but only save in draft.

    I have a BB Curver 8300.  Some mails when try to reply, BB is not giving me option to send but only save in draft.
    I tried deleting Service book and resending it is not working..
    I took backup and then Wiped the Handel, restored the backup. Still no luck..
    Pl advice. Thx
    My carrier is LoopMobile

    Only some mail? Most likely that email not giving you that option was enabled by the service book(s) you deleted.
    Try sending your Service Books again.
    On your BlackBerry device, go to:
    1. Options > Advanced > Host Routing Table > Menu > Register.
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can you save a draft SMS on X3-02 ?

    How can you save a draft SMS on X3-02 ? 
    Can't seem to find an option to do this  ...  Lost message typed half way  when I got out of the editor to check the calendar.
    Am I missing something or has Nokians obsoleted this function on the latest S40 platform ?
    Solved!
    Go to Solution.

    Hi all,
    Like sudude here pointed out that's one way of leaving text as "draft" to message editor. Or you can also select Options > More > Exit editor to do the same. And, next time when you select Create message that previous text should be there as it was left.
    But there is also another option to start writing SMS's - with Notes application. Select Menu > Apps > Notes. Write a note and save it. Then for that note select Options > Send note > Send as message. Now your note is copied to message editor and you can send it or further edit and then send. Neat thing here is that when you use Notes application, text can be saved for later editing or use.
    -ThreeOs

  • Enabling Save for file download or linktoURL

    Hi,
    I have a file in a server path(which is little bit large and extension type is custom). I want to enable the user to save the file onto his local disk. I can use either linktoURL or FileDown Load for this. When I checked FileDownload, I cant enable save in Netweaver2004, mine is SP16. when it comes to the linktoURL, I am giving path name as reference.
    So, How can I achieve this?.
    Thanks,
    Raj.

    Hi
    See this Thread
    Re: Handling dynamically generated Images
    Kind Regards
    Mukesh

  • How do I enable "Save As" and disable "Save"

    I have constructed a filable form in Adobe Acrobat Pro 8.1.  The idea is to have this form downloaded to the users computer and used weekly to track expenses and each week to print and save a copy.  The problem is that with save enabled it overwrites the original form and now the person must download another original.  My question is; How do I enable "Save As" to be used with filled out forms while disabling the "Save" function after data has been entered on the form?
    Thanks for any assistance,
    Pat

    OK Pat,
    In LC Designer you would create a button with the following JavaScript in the click event:
    app.execMenuItem("SaveAs");
    This will bring up the Save As dialogue window.
    This simplified solution will work; however if you want to be more specific in file name / path then you will run into security issues, which will require additional privileged script / certified solutions. There are some posts dealing with this:
    http://forums.adobe.com/message/1357119#1357119
    http://forums.adobe.com/message/1359267#1359267
    While the solution may not be ideal, it will at least prompt the user to "Save As" instead of "Save" and the user will just have to be responsible for making sure they rename the file.
    Good luck,
    N.

  • As soon as I type in subject line of email, it tries to save as draft and crashes.

    I'm running Windows 8 on a ASUS laptop (new within the past few months). I access iCloud mail from my PC, iPhone and iPad Mini. The problem only happens using iCloud Mail on my PC.
    Just within the past few weeks, as soon as I begin typing a subject line in mail, I get a pop-up question "Save this message as a draft?" 
    If I  Don't Save it, it kicks me out of the message.
    If I Cancel it, it takes me back to the message, but asks me again with the next key stroke and keeps asking until I move out of the subject line.  So I am being constantly interrupted while I'm in the subject line.
    If I Save it, it does save, but closes the message.
    It appears that Don't Save and Save are doing what they are supposed to, but Cancel just takes me back to the message only to be interrupted over and over.
    Is there some way to get it to quit prompting me to save a draft?

    I belive the issue is with quotes..try removing the double quotes " " or try using single quotes ' ',either removing the quotes completly or using single quotes should work..let us know if it works..

  • Save in draft folder - problem

    As I understand it, the save in draft folder function is supposed to appear only for XDP forms.  We have a PDF form where the submit button in the form is set to submit as PDF.  And yet, the save button still appears in workspace container.  If a user selects the save button and later opens the form/task, the form is converted to XML and unviewable.
    Within the UserServiceV2 activity, I do not check off the "Reader Submit - Submit via Reader" checkbox.  All of our users have acrobat.
    Is there some way for the function to work with PDFs?  If not, is there a standard workaround to offer that feature to end users?
    Thanks

    Hi Livecycle Architect,
    Did you ever resolve this issue? I have a part of the problem that you describe here. While all my forms are submitted as XDP, if we save a form to Drafts, when we open it latter it shows XML and the form is unusable.
    Any pointers will help.
    Thanks

  • Save as Draft Problem using library computer

    This afternoon I tried to save-as-draft a LONG & INVOLVED communication in .MAC e-mail at a public computer in the library. When I went to my draft folder to ensure it got saved, it was not there. Can someone give me direction on this? I suppose it goes without saying how mad and upset I am. Thanks in advance for any light you can shed on this issue.

    Hi kvs2,
    You did log into .Mac mail online to check your Drafts folder there - right?
    Not the Drafts folder on your machine at home...
    When you click Save as Draft online, there should be a small green spinning wheel in the left side of the bar between the icons at top and the To:
    Also a confirmation "Your message has been saved to Drafts" along with a green checkmark will appear and then slowly fade away in that same spot.
    Regards,
    John

  • Where is 'save as draft' icon in Mail?

    Mail Help says to click the Save as Draft icon to save a message you're working on.  But I cannot find the icon anywhere.  I know that it saves automatically anyway, and that Apple-S saves as a draft.  But, if Help says to use the icon, I would think that means there is one.  I'm so used to that icon from previous Mail versions that I would prefer it to the Command-S or just hoping the autosave works.  Anyone know if this icon referred to in the new Mail's Help exists?

    Save and send draft messages
    If you’re composing a message and want to finish it later, you can save it as a draft. Mail saves drafts automatically a few seconds after you start to compose a message. If you quit Mail while an unsent message is open, Mail saves it as a draft automatically.
    HideSave a message as a draft
    Click the Save As Draft icon in the toolbar or choose File > Save.
    You can continue working on the message at any time. Just open the mailbox where you store drafts and double-click the message.

  • Enable save for all users in rich client document defaultly for all users

    Hi,
    Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
    Thanks,
    Karthik

    I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
    You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

  • DO with selected batch info save as draft at 2007B

    Hi,
    Under 2005B version:
    For DO with selected batch information save as draft, when open the draft DO, the selected batch info is gone.
    Under 2007B version:
    For DO with selected batch information save as draft, when open the draft DO, the selected batch info is there, is anyone know which table is stored this information?
    Thank you.

    Hi,
    You can refer to following tables ODIB and OIBT and check if you get what you are looking for.
    Regards,
    Jitin

  • Why is "save as draft" missing

    What has happened to "save as draft". It is not present when I try to customize toolbar. It was such a useful tool when one was interupted during composing email.
    David Thomas

    It's no longer needed. If you are writing an email, Mail constantly saves the state. If you close the email before sending, it'll ask you if you want to save it as a draft or discard it. If you quit Mail before sending it, it'll reopen the draft when you next open Mail.
    Use either the Cancel button or CMD-S to Save as Draft.

  • Ignore Save as Draft just consider Add Sales Order

    Dear all,
    I got a problem that the following code:
    If BusinessObjectInfo.FormTypeEx = "139" And BusinessObjectInfo.EventType =                              SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD Then
    If BusinessObjectInfo.BeforeAction = False And BusinessObjectInfo.ActionSuccess Then
    XXXXXXXXXXXXXXXXXXXXX
    End if
    End if
    I just want to assign a value to the field before user "Add" Sales Order.  However, even though user didn't ADD the Sales Order and just Save As Draft but program still run into the ' IF Statement".  How can i ignore the above process when user press "Save As Draft".
    Please help.
    Regards,
    Anna

    Hello Anna,
    You can filter it with BusinessObjectInfo.Type
    Object ,             ObjName ,  ID
    Document draft  ,   DRF         ,  112
    Sales Order     ,     RDR  ,          17
    Regards, Yatsea

  • BPM - Save as draft

    Hi Experts,
    Customer creation in MDM using Webdynpro Java UI, Webservice and BPM for approval process.
    Scenario -"Save as Draft" :
                    Requestor fills in the form and save it as draft. Draft requested are accessed again through uwl inbox.
    We are planning to create BPM Workflow and store the data in BPM context.
    Experts, Is there is any other best approach for the above scenario
    Thanks,
    Best Regards,
    Arun

    HI Arun,
    You can create a seperate table for holding the Draft data which have a column say STATUS. When ever user do 'Save as Draft' update the table with STATUS value say 'D'(Draft).
    When user open a Request Form let the Draft table be shown first(if there is any rows in the draft table for the respective user with STATUS='D') where the user is given an option to work on the existing draft item or create a new Request. On submission of the form first set STATUS column value to say 'S'(Submitted), then trigger BPM Approval workflow. If you are putting too many data in BPM context , as John told it will affect the performance.
    Regards,
    Unni
    Edited by: UnnikrishnanSreekumar on Oct 12, 2011 2:06 PM

Maybe you are looking for