Tdms viewer and excel showing different data

Hi there
I have a problem reading/viewing my TDMS file. My file contains 37 channels and about 7000 samples per channel.(Just this file... Later I have to expand it on much more ~150k samples per channel)
Now my problem is: If I open the TDMS file with the TDMS file viewer VI, it begins to switch channels after ~1000 samples (Channel 29-37(MM1-MM9) should always be on -32768 but after 1000 samples the channel switches their place
My analysis of switching: After ~1000 Channel 29-37(MM1-MM9) is on 11-19 after ~2000 on 30-1 after ~3000 on 12-20 and so forth...
Besides the channel switching there is a block of ~30 rows only filled with 0 every ~1000 samples
But if I open the file in Excel with the TDMS-Addin it's showing the correct data. Why is this and how can I fix the Viewer?
Hope that you understand what i try to say
I attached one of my TDMS-files as a ZIP, couldn't attach a TDMS directly.
Solved!
Go to Solution.
Attachments:
test_30-04-13_17-07.zip ‏326 KB

Thank you for your help
With the defragmentation VI at the end it works now!
I append my data every 499 samples but at the end I will get files with 10k samples(writing around 20 times). So the number I'm adding there is the amount of samples writing per time, not in total? Didn't understand, what all the variables I had to enter, exactly do

Similar Messages

  • Design View and Browser show different layout

    I am having an issue with a site I am working on. The site
    looks great in
    the browser, but it doesn't look right in design view in
    Dreamweaver. I
    have posted 2 screenshots (they are around 140k apiece), they
    are linked
    below,
    Dreamweaver -
    http://www.swvtc.dmhmrsas.virginia.gov/dreamweaver/dreamweaver.jpg
    Browser -
    http://www.swvtc.dmhmrsas.virginia.gov/dreamweaver/browser.jpg
    What would be causing this?
    Thanks in Advance,
    Drew

    It could be a number of things, but until we see the code it
    would only be,
    at best, a guess. Please post the link to the page.
    Jo
    "Drew" <[email protected]> wrote in message
    news:edn3u8$lc1$[email protected]..
    >I am having an issue with a site I am working on. The
    site looks great in
    >the browser, but it doesn't look right in design view in
    Dreamweaver. I
    >have posted 2 screenshots (they are around 140k apiece),
    they are linked
    >below,
    >
    > Dreamweaver -
    >
    http://www.swvtc.dmhmrsas.virginia.gov/dreamweaver/dreamweaver.jpg
    > Browser -
    http://www.swvtc.dmhmrsas.virginia.gov/dreamweaver/browser.jpg
    >
    > What would be causing this?
    >
    > Thanks in Advance,
    > Drew
    >

  • Newbie blues: Oracle Sql Developer showing different data from Sqlplus.

    Newbie blues: Oracle Sql Developer showing different data from Sqlplus.
    First of all; it would be difficult to know less about Oracle than myself.
    I just installed a recent copy of the server and am running SQl Developer 3.2.20.10.
    I made a small test table , borrowed some pl sql code to add rows, then wrote code to delete some rows. Lots of fun.
    In SQL Developer “Select * from t1;” now shows 7 records, which seems right.
    I wanted other views of the data and so logged in from the command line using SQLPlus.
    The same code here shows the table prior to the delete, with 600 plus rows. Needless to say I’ve logged out and back in again, with no changes.
    No fun ! What am I not understanding here ?

    5e33d18c-3b32-48d4-82a7-676feeaa97c9 wrote:
    Newbie blues: Oracle Sql Developer showing different data from Sqlplus.
    First of all; it would be difficult to know less about Oracle than myself.
    I just installed a recent copy of the server and am running SQl Developer 3.2.20.10.
    I made a small test table , borrowed some pl sql code to add rows, then wrote code to delete some rows. Lots of fun.
    In SQL Developer “Select * from t1;” now shows 7 records, which seems right.
    I wanted other views of the data and so logged in from the command line using SQLPlus.
    The same code here shows the table prior to the delete, with 600 plus rows. Needless to say I’ve logged out and back in again, with no changes.
    No fun ! What am I not understanding here ?
    Others sessions never see uncommitted data
    > then wrote code to delete some rows. Lots of fun.
    did you ever actually issue COMMIT so other session can see the changed data?

  • Software inventory report and PC show different information

    Hi,
    The scenario is the following:
    SCCM 2012 R2.
    Clients with windows 8.
    The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
    Programs and features screenshot(ordered by name):
    Report screenshot (ordered by name):
    The question is:
    Is the above normal behavior?
    if not
    How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
    Thanks in advance!

    Take a look at that device in Resource Explorer.  Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class.  This data comes from the registry, and on a 64-bit operating system there
    are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
    If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
    If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications.  This is much easier to report
    off of.
    I hope that helps, 
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • Performance issues when using Smart View and Excel 2010

    Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
    It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
    Any advice / tips on how to optimise the performance would be greatly appreciated.
    Thanks,
    Nick

    Hi Nick,
    Office 2010 (32 bit) only is supported.
    Also check these documents:
    Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
    Smart View Refresh Returns Zeros (Doc ID 758892.1)
    Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
    Thank you,
    Charles Babu J
    Edited by: CJX on Nov 15, 2011 12:21 PM

  • Can seeded Elements and Balance have different Date Track

    hi,
    The Elements created in our instance is date tracked to 01-JAN-1900 and the seeded balance date tracked to 01-APR-2005. Can seeded Elements and Balances have different date track both being seeded. Example Element is "PF INFORMATION" and Balance Named by "Leave Encashment"
    How to resolve this problem when I am trying to add seeded Balance which is date tracked to 01-APR-2005 to Element date Tracked to "01-JAN-1900". I am not able to find the Balance in that Element as balance is date tracked later than Element.
    If I want to add custom Element which is date tracked to 01-JUN-2002 and Seeded Balance which is date tracked to 01-JUN-1950. Since in this case i am not able to see the Custom Element in the Balance screen.
    Thanks
    Ram

    you are not allowed to add feeds to a seeded balance type.
    Can the dates be different? Sure. Look to your own dates.
    By the way, why bothering about dates in 2005 and 1900, if you want to run a payroll now?

  • I m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

    i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

    Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
    Otherwise surf google you mite have to edit you host file in windows , system32
    Let me know if it works

  • TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

    hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

    They are not a supported carrier. You'll have to take it up with them.

  • ODS and Infocube showing different results

    Hi,
    I loaded same data to Infocube and ODS but they are both showing different result in BEX.
    ODS
    ODS report is showing summarised values e.g
    vendor               order value                   invoice value        date
    00001                    20                               20                 01.01.2007
    Infocube
    result is showing not summarised values
    vendor               order value                   invoice value        date
    00001                    20                                 0                      0
                                  0                                20                  01.01.2007
    I would like to make the infocube result same as the ODS because I am remodelling so that we start reporting from Infocube rather than ODS.
    thanks

    Hi,
    this is the scenario
    currently we are reporting from ODS object which fetch data from 3 ODSes. now I am asked to remodel so that we can report from infocube not ODS.
    steps I have taken so far.
    - created new infocube
    - created 3 update rules ( same Update rules that gives the reporting ODS data).
    my target is to make sure that the current ODS  report is the same as the infocube report but so far the report is not consistent
    I compared the data in the ODS and infocube and they are exactly the same but the report is showing differently

  • Report viewer web part, show different report everyday (rotate .rdl files)

    We have a report viewer web part on sharepoint site (intranet), which is working fine and showing the report (.rdl file).
    We want to show different report everyday by looping through a list of 4 or 5 important reports  (from sharepoint document library) that can be displayed on our intranet. We have limited space on the intranet to display the report (we have custom built
    reports that will fit in the allocated space).
    Our .net guy says he can do image rotations by custom web part but not sure how to use the .rdl files..
    Has anyone got any ideas on how to achieve this.

    We have a report viewer web part on sharepoint site (intranet), which is working fine and showing the report (.rdl file).
    We want to show different report everyday by looping through a list of 4 or 5 important reports  (from sharepoint document library) that can be displayed on our intranet. We have limited space on the intranet to display the report (we have custom built
    reports that will fit in the allocated space).
    Our .net guy says he can do image rotations by custom web part but not sure how to use the .rdl files..
    Has anyone got any ideas on how to achieve this.

  • Dba_index_name and dba_ind_columns showing different results

    Hi All,
    I am confused why it is showing different results:
    [email protected]#>select index_name from dba_indexes where table_name='CRBTPROV_FINAL';
    INDEX_NAME
    CRBTPROV_INDX1
    [email protected]#>select index_name from dba_IND_COLUMNS where table_name='CRBTPROV_FINAL';
    INDEX_NAME
    CRBTPROV_INDX1
    MSISDN_IDX
    When trying to drop index MSISDN_IDX it gives error:
    ERROR at line 1:
    ORA-00054: resource busy and acquire with NOWAIT specified
    But when trying to check where all the index is used using v$access:
    select * from v$access where object='MSISDN_IDX';
    no rows selected
    Regards,
    Kirti

    If I run the following query on a 9.2.0.6 database, no index is listed:
    select type, count(*) from v$access group by type;CURSOR
    FUNCTION
    NON-EXISTENT
    PACKAGE
    SEQUENCE
    SYNONYM
    TABLE
    TRIGGER
    VIEW
    It seems that index is not taken into account by v$access ?

  • Layout shows different data depending on user-language (German or English)

    Hello best of the best,
    we are using layouts to enter data into BCS. In one of our layouts different numbers are shown depending on the user-language (German or English).
    This is despite the same layout is used.
    Have you got any idea what could cause this problem?
    Is there a setting somewhere that I didn´t know up to now (to distinguish in different languages)?
    Better to ask SAP using an OSS-message?
    Many thanks in advance,
    Thomas
    If you need more information about that case, pls tell me.

    The numbers are volumes (KWh, to, l).
    There are several positions with different "Breatdown Categories". In the english version of the layout only the KWh-volumes are shown. "to" and "l" (Diesel) are missing.
    To describe the problem more clearly, in the german version the layout seems to show correct data:
    Position                KWh         to         l
    Diesel (l)                   -            -       5.000
    Coal (to)                    -        3.000      -
    Electricity (KWh)   200.000      -         -
    The "-" shows fields that are grey --> no data can be inserted
    The english version looks like this:
    Position                KWh         to         l
    Diesel (l)                   -             -          -
    Coal (to)                    -            -           -
    Electricity (KWh)   200.000  200.000  200.000
    Here the white fields at Diesel (l) and coal (t) are empty, but the grey fields in the col´s "to" and "l" show the value of "KWh" in electricity as well.
    Does this answer your question?
    br,
    Thomas

  • Count and Sum show different in Summary tab

    Hello friends,
    Webi 4 version
    I have a webi dcument with 4 report tabs. Summary, Expense,Revenue and Forecasting.
    I have a SUM value in Expense tab and Revenue tab. I also have Count value in Forecasing.When I copy these SUM and Count values to Summary tab, they show different values than those in other tabs.
    Please help me to resolve this
    Thanks
    Renpal

    Hi Renpal,
    Even if we write the aggregate values in to a variable and if you copy that variable in Summary tab it may not give the same result.For Example.
    If count of Sales orders in Detail tab is showing as 500 and in Summary tab it may show as 489. This is because in Detail tab there might be some cells which are "#" or Not assigned. so due to granularity it will count each and every cell, incase of summary all # or Not Assigned are calculated as 1.
    Can you check wrt the above example where exactly the data is not matching.
    Regards,
    G.SaiNath

  • Table views/sprocs not showing in Data Source Explorer

    i have a database connection and is in good health.  the tree node for the database lists all of the folders expected, but only the Tables folder is populated with actual tables in the database.  the views and stored procedures are not showing even witht the filters disabled.  on the database i granted dbo rights to the user i am connecting with.  using flex builder 3, flex 3 and sql server 2000.

    Hi Himanshu
    Few fields does not work from particular table. you need to try different table for those fields. those fields could be arranged differently.
    This is neither configuration nor application issue.
    Also check your fields are from transparent table or not...

Maybe you are looking for