Enable server group mailing list

I am try to figure out why I cannot get the server group mailing list to work. I have a group called testgroup in my OD and have 4 users added to it. I restarted the server after I ticked the box "enable server group mailing list" in Mail/settings/Mailing list and when I send an email to testgroup the mail client rejects the address. What am I doing wrong? All I want to do is create a group email account.
Any help greatly appreciated.

HI John,
The group settings in WGM SL and Leopard are different.
Yes, they are. I booted to my eval copy of SL Server and ran through the settings in WGM, Server Admin and Server Preferences; as you pointed out, all the mail list admin tools I could find are in the Mail service in Server Admin.
The only thing that may be of interest that I could find is that for the group mail list, the email address for the group is group_shortname@ServerDNSname, not groupshortname@yourdomain (this is in the Mail Services Admin Guide for 10.6). This might explain why your email to the group may have been rejected?
-Doug

Similar Messages

Cannot enable group mailing list

Hi,
Running 10.5.2 server on Xserve, server acts as OpenDirectory master and Mail sever.
We have a normal mail service running fine, but trying to enable the "Mailing List" option for groups results in an error.
"Error of type eDSInvalidAttributeType (-14131) on line 733 of /SourceCache/WorkgroupManager/WorkgroupManager-319/Plugins/GroupAccounts/GroupB asicPluginView.mm"
Web service is enabled, and appears as the option for the dropdown "Enable services for this group on:", but even just choosing the server from the dropdown and attempting to save the config (without turning on any services) results in this error.
Can anyone help with what this means?
Thanks,
Sam

Hi,
In Mail service -> General -> ensure "Enable SMTP" is checked,
if you don't desire to send outgoing from clients then don't select any authentication methods in Mail Service -> Security -> SMTP,
In Mail service ->Mailing Lists ensure that "Enable server group mailing lists" is checked,
once that is done, per website -> Web Services ensure "Mailing List web archive" is checked if you want mail to appear on the website,
For each group ensure "Mailing list" is checked, and "Mailing List web archive" if you want the group email repository on the website.
At least one group member should have an email account or a Forward to email address for the mail to go somewhere, assuming Web archive is not selected.
Send an email to the group address at [email protected] and look in the SMTP log for teamsserver to receive the email and then forward to individual addresses.
Hope this helps,
Harry

JDO Spec Discussion Group/Mailing List

Is there a newsgroup, mailing list or other forum where users of the JDO
spec and it's implementations can discuss the spec, best practices, ask
general spec-related (rather than implementation) questions, etc?
Thanks.
Sasha Haghani
Activience
http://www.activience.com/

Hi,
I have used the group mailing list feature and the group web service maillist archive.
In both cases the Mail service must be running. I set up the General panel to Enable POP and IMAP because I have users on those services. I did not Enable SMTP because I used my ISP for outgoing. I don't think you need IMAP or POP for teamsserver mail because no mailbox is created for that user by cyrus or postfix.
In the Relay panel set to accept SMTP relays from 127.0.0.1 and your server IP.
Use junk mail rejection from zen.spamhaus.org
In the Mailing lists panel Enable server group mailing list.
In the Advanced panel -> Hosting ensure you have a local host alias set for your groups domain.com
Group mailing list can be setup in WGM with Enable Mailing list for the group.
Group Mailing list web archive will only work when wiki/blogs are setup for the group.
HTH,
Harry

Enable group mailing list in Server.app not working

Hello everyone,
I have been trying to enable a new (?) feature of Server.app : "Enable group mailing list". Until now, it does not work for me. When I try to send an email to the group [email protected], Mail tells me that the smtp server cannot send my message. Here is what I see on the server's /var/log/mail.log file :
Sep 10 16:55:54 testserver01.pretendco.net postfix/smtpd[2311]: NOQUEUE: reject: RCPT from testclient01.pretendco.net[10.1.101.10]: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<testclient01.pretendco.net>
Sep 10 16:55:54 testserver01.pretendco.net postfix/smtpd[2311]: disconnect from testclient01.pretendco.net[10.1.101.10]
It is interesting to note that group mailing list aren't even mentioned in the Mac OS X Server Advanced Administration Guide :
http://help.apple.com/advancedserveradmin/mac/10.8/#apd9430d30c-5796-4a20-a8f9-1 20638938942
Does any has any good/bad experience with group mailing lists under Mountain Lion Server ? Any advice ?
Thanks a lot !

Hello Mark23 and thanks for your help !
The log says nothing particular when I (un)set the "Enable Group Mailing List Option". The only difference I see is a line saying mail_groups[127]: sleeping for: 1 hour(s). I have no idea what this means exactly. Googling it did not help me much either.
I post the /etc/aliases file below. Interesting : every time I (un)set the "Enable Group Mailing List" option, the /etc/aliases last access time changes. But the md5 hash of the file stays the same.
I guess that the "sudo newaliases" uses /etc/aliases to construct the binary database file /etc/aliases.db ? It seems that this script is run every time I (un)check the option since the access time of *both* /etc/aliases and /etc/aliases.db are changed to the current time.
Do you have any other option checked ?
Here is my /etc/aliases (I removed the blocks of comments at the beginning and at the end):
# Person who should get root's mail. Don't receive mail as root!
#root:                    you
# Basic system aliases -- these MUST be present
MAILER-DAEMON:          postmaster
postmaster:          root
# General redirections for pseudo accounts
bin:                    root
daemon:                    root
named:                    root
nobody:                    root
uucp:                    root
www:                    root
ftp-bugs:          root
postfix:          root
# Put your local aliases here.
# ==== Begin auto-generated section ========================================
# This section of the aliases file is auto-generated by server admin tools
# Please do not edit this section or your modifications will be lost
# === End auto-generated section ===========================================
# Well-known aliases
manager:          root
dumper:                    root
operator:          root
abuse:                    postmaster
# trap decode to catch security attacks
decode:                    root

I dont receive e-mails with attachment sent to OS X Server 3.0.1 Group-mailing lists

I have a small company using a mac mini with mavericks and server 3.0.1.
We are using most of the services available in OS X server (except DHCP, Netinstall and Xsan). One of the services we use the most is Mail server, and the whole company uses that as our primary mail server.
We have set up several different Groups and activated group-mailing lists on some of them. The setup has been working very good for over a year (started using it with Mountain Lion Server).
Recently I was going to send a christmas card to all employees using the workgroup mailing list. I was using the stationaries in Mail, and it was sent as normal but never recieved by me or any of the other employees. Below is the SMTP Log
Dec 6 17:10:16 server.mydomain.com postfix/smtpd[29101]: connect from unknown[10.0.1.16 *<- my local IP address*]
Dec 6 17:10:16 server.mydomain.com postfix/smtpd[29101]: 480451503B0A: client=unknown[10.0.1.16 *<- my local IP address*], sasl_method=CRAM-MD5, sasl_username=myusername
Dec 6 17:10:16 server.mydomain.com postfix/cleanup[29109]: 480451503B0A: message-id=<[email protected]>
Dec 6 17:10:16 server.mydomain.com postfix/qmgr[23288]: 480451503B0A: from=<[email protected]>, size=98063, nrcpt=1 (queue active)
Dec 6 17:10:16 server.mydomain.com postfix/local[29110]: 480451503B0A: to=<[email protected]>, relay=local, delay=0.13, delays=0.05/0.01/0/0.08, dsn=2.0.0, status=sent (delivered to command: /Applications/Server.app/Contents/ServerRoot/usr/libexec/MailService/list_serve r_post post workgroup)
Dec 6 17:10:16 server.mydomain.com postfix/qmgr[23288]: 480451503B0A: removed
Dec 6 17:11:16 server.mydomain.com postfix/smtpd[29101]: disconnect from unknown[10.0.1.16 *<- my local IP address*]
I did some trial and error and it seems like it is linked to the fact that I have attachments to the email. Sending an email with only text is recieved like normal. Even attacment like PDF or jpg is "blocked" it seems. I have tried using email outside my domain but still the same result. Sending the same email (with attachment) to all reciepients (not using the mailiing list) works and is recieved by everyone. I have turned off all email filtering settings on the server but still the same result.
Is anyone else experiencing the same problem? My guess is that this is a Server 3.0.1 hickup, so it would be nice to get confirmation from others experiencing the same.

Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Groups-Enable Group Mailing List

I just upgraded from Mac OS X 10.6.8 Server to Mac OS X 10.8.3 Server. I had an Employee Mailing List working under Mac OS X 10.6.8, but can't seem to get the new Group Mailing List to work that was created in Groups in Mac OS X 10.8.3.
When trying to send an email to the group "[email protected]" I get the message "Cannot send message using the server". I gave the group access to Mail but it still doesn't work.
Any ideas?

Yes, it works, but the Mail Overview still return Mailing Lists Stopped, and I don't know why...
This is the procedure:
- on server open terminal
- then use these commands
1) sudo touch /etc/postfix/aliases
2) sudo newaliases
3) sudo postfix reload
that's all!
You can also see page 36/37 of Mail Service Administrator Guide
Fabio

Enable server group in BPC job execution

Dear Experts
[Note 1476057 - Enable server group in BPC job execution|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=0001476057&nlang=E]
After upgrade, the server group logic will be :
1, Create a correct server group with server assigned,
    job will be executed in specified server group;
2, Create a server group without server assigned,
     job will be successfully submitted to BW,
     but will not be executed until server is assigned to the server group;
3, Incorrectly specify a server group in web admin,
     client will get error message when run package.
As I understand the group server is defined in BW Server. Where should I specify this group server in BPC. I could not find the parameter in BPC Web Admin - Appset Parameters or BPC Server (.Net Server) - Server Options.
Appreciate if somebody can help ?
Thanks
Ashish
Edited by: Ashish Narway on Oct 14, 2010 2:55 PM

HI John,
The group settings in WGM SL and Leopard are different.
Yes, they are. I booted to my eval copy of SL Server and ran through the settings in WGM, Server Admin and Server Preferences; as you pointed out, all the mail list admin tools I could find are in the Mail service in Server Admin.
The only thing that may be of interest that I could find is that for the group mail list, the email address for the group is group_shortname@ServerDNSname, not groupshortname@yourdomain (this is in the Mail Services Admin Guide for 10.6). This might explain why your email to the group may have been rejected?
-Doug

Group Mailing Lists and Email Addresses

Howdy All,
A couple of quick questions:
1. When a Group mailing list is created does this create an equivalent Mailman mailing list (i.e. that would appear at the Mailman list URL)? I'm not so much concerned as to whether Groups uses Mailman behind the scenes just whether or not one could "further" admin the group mailing list through the admin interface.
2. What happens when you have a username "x", a group name "x" (which I commonly used on other Unixes) with a mailing list (implictly named "x"), and a Mailman mailing list named "x" (what was created as a Mailman mailing list in Server Admin) and then you email x@serverDNSname? Because I often use the same user and groups names this could be quite common.
Thanks for any thoughts on these puzzles.
Cheers,
Ashley.

I am beginning to suspect a combination problem- i.e. bad converter and bad Admin Tools.
The 10.6 Mail Admin manual states that:
+In Workgroup Manager, enable the Mailing List service for each group you want to have a mailing list address.+
+The setting is located in the Basic group options in Workgroup Manager.+
However, I no longer have these options in Admin Tools. I had them in 10.5.8, but not in 10.6 or 10.62 tools. I took a screenshot of the basic tab in WM:
Image: !http://i157.photobucket.com/albums/t69/dunkelza/Screenshot2010-01-08at81609AM. jpg!
I checked the About Workgroup Manager menu item and got "Version 10.6.2 (361.2.1)"
So it appears that the update to 10.6 not only failed to convert the LDAP settings correctly and/or map them to the mail system; but, that the update also removed my ability to see this and fix it through the GUI.

Delete an entry from group mailing list

Does anyone know how to remove entries from a group mailing list?
There is no edit button and the list is not visible in mailman?
Thanks in advance
Gary Finch

I would like to know that myself! Afer a long search I was only able to find the following information:
http://rickcogley.blogspot.com/2008/05/how-to-remove-leopard-wiki-mailing-list.h tml
I'd be glad to know if another (more user friendly) way exists. The MailServiceAdmin.pdf apparently wrongly suggests that mailmain can be used to administer server based mailing lists. Is there any "official" way to manage the mailing list and its web archive?

How to create a group mailing list in JavaMail?

Hello,
I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
Thanks in advance!

Hi:
I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
Best regards,
Fabio Galarraga.

How to create a group mailing list?

how to create agroup mailing list?

i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column. this is after i created a new group under address book, & then drug over individual names into the group. what am i doing wrong?

Messaging Server and Mailing Lists

Hello,
is Messaging Server capable for use as a mailing list server like mailman to which one can send subscribe, unsubscribe and help messages? If yes, can one point me to the right documentation about that?
Thank you very much.
Greetings,
Willi

Hello Ajith,
Look at this and try downloading "mailmanwrapper.pl "
http://ims.balius.com/downloads/
I looked at the script but I do not understand the mapping to the LDAP database backend of the Messaging Server. In the script it is said "The ldap entries for the above aliases are below the script" but there are no such entries. In another wrapper script from Stephen Balukoff I found the following example LDAP entries:
dn: uid=list,ou=Mailman,ou=People,o=${mail_domain},o=isp
objectClass: mailRecipient
objectClass: top
objectClass: inetMailUser
objectClass: inetLocalMailRecipient
mailUserStatus: active
mail: list@${mail_domain}
mailHost: ${mail_host}
uid: list
mailDeliveryOption: program
mailProgramDeliveryInfo: mailman-post
dn: uid=list-request,ou=Mailman,ou=People,o=${mail_domain},o=isp
objectClass: mailRecipient
objectClass: top
objectClass: inetMailUser
objectClass: inetLocalMailRecipient
mailUserStatus: active
mail: list-request@${mail_domain}
mailHost: ${mail_host}
uid: list-request
mailDeliveryOption: program
mailProgramDeliveryInfo: mailman-mailcmd
dn: uid=list-admin,ou=Mailman,ou=People,o=${mail_domain},o=isp
objectClass: mailRecipient
objectClass: top
objectClass: inetMailUser
objectClass: inetLocalMailRecipient
mailUserStatus: active
mail: list-admin@${mail_domain}
mailHost: ${mail_host}
uid: list-admin
mailDeliveryOption: program
mailProgramDeliveryInfo: mailman-mailowner
mailAlternateAddress: list-owner@${mail_domain}
Are this entries correct for the list aliases in mailmanwrapper.pl?
Thank you.
Greetings,
Willi

Server Admin, Mailing lists, server_mgr error

Hi,
Everytime I try to use SA to add a mailing list (or anything under Mail), I get a "A connection with a server or service was lost" error. In the system log, I get this:
host /Applications/Server/Server Admin.app/Contents/ MacOS/Server Admin: HTTPREQUESTFAILED: https://hostname:311/ commands/servermgr_mail: err=0 (write)\n
I have tried repairing permissions and rebooting the server. I tried restoring the servermgr_mail service to default configuration. Any other ideas?

don't use Server admin to add a maillist
connect through your web browser.
go to
http://servername.domain.com/mailman/admin
http://servername.domain.com/mailman/create
you may need to turn web service on.

Group mailing list adress

Hi, maybe this is a stupid question but I have some trouble figuring it out. I have a mail server with several domains. The domain name is set to something.com and the host name is set to mail.something.com Every e-mail user gets the mailadress [email protected] but I wanted it to be [email protected] I can set every account up manually but why am I doing wrong? It works on regular users to do this, but not on groups.

There's probably a better way to do this, mines a bit of a hack - but it works.
Under Mail->Advanced->Hosting
I just made sure that all the domains I host email for (5 of them) are listed under local host aliases and virtual hosts. This has caused some warnings in the postfix logs that I haven't looked into yet. If it's complaining its obviously not the right way, but insofar as emailing to my groups it works great.

How does one create a GROUP mailing list from an e-mail message ? ?

I am having no end of frustration trying to figure out - using the latest versions of Apple Mail and Apple Address book in side-by-side windows, t he following:
How to select; then 'drag & drop' a list of email addresses from an incoming email message I am reading, so that I can create in my own address book a duplicate "Group" list bearing all the addresses that got the message.
I am sure I have been able in the past to use simple drag-n-drop technique between the mail window and the newly created "Group" window in Address Book, but it won't work this time .
Is there a script or a third party app somewhere that will lift addresses out of the "TO" and "c.c." fields in an Apple Mail message and import them into a designated (new) 'Group' list in Address Book.
Or is there a way to create a CSV file from an email message - if that will do the trick ?

Mailscript's Add Addresses script should open a window with all the addresses in the email listed. You can select the ones you want to import, you can choose the group or create a new one, and you can pick the label for the email address. It will stay open so that you can add different emails to different groups.
Your description doesn't sound anything like Mail Scripts.

Enable server group mailing list

Similar Messages

Maybe you are looking for