Matrix - Click Type ct_linked

Hi All,
I'd like to use a linked button in the matrix to allow the user to drill-down into an A/R Invoice.
Unfortunately it is not possible to use the Document Number.
You have to to use the internal Document "Entry" number for the linked button.
I don't want to diplay the Entry Number because it's not of any interest for the user.
I had the idea to load the entry number into an additional column which is not visibe and then simply perform a click on the replated linked button.
But it doesn't work.
It seems it doesn't perform the requested action.
I even tried it with a visible column for a BP code:
col = mtx.Columns.Item("colBPC");
col.Cells.Item(pVal.Row).Click(SAPbouiCOM.BoCellClickType.ct_Linked, 0);
col = null;
Has anyone managed to achieve this?
Thanks!
Regards,
Gerold

Hi I have interview tomrw.
Under AR
RP
CT
RC
And Document Posting
1.RAte FActors
2. PD
3.Dc
4.Substitution Rules
4. ERT
5.Validation rules
CAn any one explain in detail what each code means.
thanks
Minal

Similar Messages

Click type and Click scenario

When recording a typical click, type in the field and then click search scenario, Captivate doesn't recognize that the text has been entered into the field and advance you to the next action unless you press tab or enter. Neither of which are required steps in the actual flow.
I want the training simulation to 1) have the user click the field and enter specified text then 2) click Search.
Captivate allows the text to be entered, but then does nothing unless pressing enter or tab, preventing the user from simulating the "REAL" steps.
Does anyone know how to achieve this?
Thanks.

Hello and welcome to the forum,
You could make the Submit button, which is also a way to submit the entry in the Text Entry Box, invisible by deleting the text and turn it into a Transparent button. Then put it on top of 'Search', so when the user clicks on Search he will submit his entry.
Lilybiri

How to show image in matrix by selecting matrix column type as "it_PICTURE"

Hi All!
Can i show image in matrix, by selecting matrix column type as "it_PICTURE". If yes please write the steps.
Thanks & Regards
Surojit

Hi
First you have to set the matrix column type as it_PICTURE then bind that column to a userdatasource or dbdatasource. In the following code I am using userdatasource . This code will   set the picture to a sepecified columns first row. Please create small image and paste it in your c drive (15X15 size image-- "c:\pic.png")
Dim oColumn As SAPbouiCOM.Column
            Dim mtxDisp As SAPbouiCOM.Matrix = form.Items.Item("mtxDisp").Specific
            form.DataSources.UserDataSources.Add("udsPic", BoDataType.dt_SHORT_TEXT, 254)
            oColumn = mtxDisp.Columns.Item("colPic")
            oColumn.DataBind.SetBound(True, "", "udsPic")
            mtxDisp.AddRow()
            mtxDisp.GetLineData(1) '*Loads UserDataSources from line X*'
            mtxDisp.DataSources.UserDataSources("udsPic").ValueEx = "c:\pic.png"
            mtxDisp.SetLineData(1) '*Sets Matrix line X based on current UserDataSource values*'
Hope this helps
Regards
Arun

SSRS matrix click on the count like a pivot table to get details

Hi,
I am trying to create a matrix report to work similar to a pivot table, where when a user clicks on the count, the details are displayed. When I add the action to open a sub-report, how do I pass in the parameter values for the group that was selected? meaning
if in row group- I have company name, and column group I have job title, when the count gets clicked, i need to pass in the company name for the row that was clicked along with the column group. How can I proceed?
Thanks in advance!

Hi NewCSharpUser,
According to your description, you have created a main report which contains company name as row group and job title as column group. And a drill through report which contains company name as a parameter to filter the data. When you click the data region
in the main report, you want to display corresponding details in the drill through report filtered by the company name, right?
In your scenario, you could add a “Go to report” action, then specify a parameter to filter the drill through report. Please refer to steps below:
1. Design the main report like below:
2. Preview the report.
Reference:
Drillthrough Reports (Report Builder and SSRS)
If the method couldn't meet your requirement, please share you report design and expected results for our analysis.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Activate linkedbutton in a matrix through code?

Hi... Anyone know if it is possible to activate a linked button in a matrix through code?
Observations:
1 - In normal linked buttons i just use the click method... works fine
2 - In matrix the columns click method just focus the cell
3 - The colums extended object (Linked Button does not have a click event)
Anyone know how this can be done at all?

hi,
The Click event of Cell Item with click type 'SAPbouiCOM.BoCellClickType.ct_Linked' Activates Linked Press event.
oForm = oApplication.Forms.Item(FormUID)
oMatrix = oForm.Items.Item("7").Specific oMatrix.Columns.Item(<colid>).Cells.Item(<rowno>).Click(SAPbouiCOM.BoCellClickType.ct_Linked)
HTH
With Regards
B.Ravi Shankar

How to access a Matrix cell value outside the matrix in textbox?

Hi
I have created a matrix in SSRS. Columns are grouped by Channel Type. I want to access indicated cells value outside the matrix.
After Running the report the report shows
How can I access cell values outside the matrix? Please help

Hi Aladin92,
According to your description, there is a matrix in the report, you want to reference the first value of total outside the matrix, right?
In fact, Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope. Are the both textboxes in the same group. To workaround the issue, please refer to the following steps:
1. Click and select the matrix, copy it and paste it in the report above the original matrix.
2. Right-click handle of the first row in the upper matrix, click Insert Rows, then click Inside Group-Above.
3. Right-click second cell of the first row, then click Expression.
4. In the Expression text box, type the expression like below:
="A total of "& ReportItems!Textbox5.Value & "out of 258 BC CCRs have been evaluated"
5. Set the text boxes and rows visibility to be hidden except for the text box with expression.
The following screenshots are for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Is there a way to read the system DoubleClickTime double-click%3F

Hi,
I'm doing some customized actions on a tree if a user "slow-double-clicks" on a valid tag in the tree. My current solution works, but I would like to set the "limit" or interpretation of what constitutes a "slow" double-click based on the system DoubleClickTime setting of the system that the program is running on.. Anyone knows how to read this piece of information on a) windows system or b) any system?
Please note that due to what I'm trying to accomplish, I cannot use the "double-click" event to make this determination. (Double-clicks are left alone to do whatever they would normally do.)
Microsoft MSDN on Double-clicks
--I guess a more general form of the question would be "how to read out windows system settings in LabVIEW".
For the specially interested, my program is an event driven queue machine. When I get a mouse up on the tree-control, I pass the ms timer to an action engine (get, set, re-set) which tracks delta time between two clicks and passes out an enum of "click type" (as defined by me) as either n/a, single, double, slow double.
In my queue handler loop, I take the click message (from event loop), do some basic checks (is tag of the tree coordinate location empty string?) and pass it all along to another state that determines what to do based on click type, parent(s) (or indent level) and column. The need for this "slow-click" feature came about when I needed to let the user re-name a parent level tag-item.. If you double-click normally on a parent, it will expand or collapse its children list. . In some applications, (windows explorer for example), the default double-click action (open the file) can be "changed" to a "rename" function by clicking a little slower. Clicking too slow will be interpreted as a "single" click (e.g. select).
QFang
CLD LabVIEW 7.1 to 2013

How about now?
The clue is in tst's post above, its under .net, windows.forms http://msdn.microsoft.com/en-us/library/system.windows.forms.systeminformation.doubleclicktime.aspx
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

How can I remove annoying click sound when opening new tab?

I've already goggled this and it said something about no-script (which I'm not running) and nothing else that sounded remotely close to my issue. Basically anytime I open a new tab (which I do tons of) I get the most obnoxious loud click type sound and it drives me up the walls. I can simply mute the whole browser but then many media players and the like play the audio directly through the browser instead of adobe flash or the like. I just learned it also plays the most annoying sound in the world when I use the spellcheck feature...
Any help on removing this terrible sound file from Firefox would be greatly appreciated... I would hate to have to start using chrome just to get away from this sound.
The only add-ons I use are Adblock Plus 2.6.3, Advanced SystemCare Surfing Protection 1.0 (I assume it installed itself with the actual ASC program), and Leechblock 0.6.6.
All my plugins are off by default unless I manually turn them on the add-on manager window when I start up firefox and the sound plays before I ever activate them.

Did this start when you installed Firefox 30, in other words, Firefox 29 and earlier was fine?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

How to create a matrix report on Apex 4.1

Hi all.
I need to create a report similar to this one:
Jan Feb Mar .....
Product Category
Category One 999 999 999
Category Two 999 999 999
On a reporting tool like Oracle Reports, this is call a matrix report which can be easily created: just one simple query , select a matrix report type, compute summary values for row /column and grand total, and that is.
How would one implement this on Apex 4.1???
Have a couple of ideas:
- Populate temporary table with columns corresponding to month.
- Create a procedure that return a collection and use that as a source for report.
- Etc.
What other options do i have ...?
Thanks in advance ...!

Hi all,
I did create a matrix report using the pivot function and some interesting settings in APEX. So far it is only does display data. I did not find a way yet(?) to alter the data in the same matrix.
The data is based on a simple set of tables about planning. The end result does look something like the matrix below. Note: the dashes are just there to make the matrix look like a matrix on this forum.
Resource 13-08 20-08 27-08 03-09 10-09 17-09 24-09
Angelo-----25-----22-----12-----10------------------------
John---------8-----22-----36-----22------------------------
Marit-----------------5-----40-----36-----24-----12-----10
The resources (Angelo, John and Marit) are being registered in the following table:
CREATE TABLE EVP_RESOURCES
RSS_ID NUMBER(10,0) NOT NULL,
NAME VARCHAR2(25 BYTE) NOT NULL
The date periods (13-08 till 24-09) are being registered in the next table:
CREATE TABLE EVP_DATA_POINTS
DPT_ID NUMBER(10,0) NOT NULL,
DATA_POINT_DATE DATE NOT NULL,
V_DATA_POINT_DATE_FORMATED VARCHAR2(75 BYTE) GENERATED ALWAYS AS (TO_CHAR("DATA_POINT_DATE",'dd-mm')) VIRTUAL VISIBLE
The virtual column (v_data_point_date_formated) is not needed. You can use this virtual column or format the column in multiple places.
The available units are being registered in the intersection table below:
CREATE TABLE EVP_RESOURCE_PLANNING
RPG_ID NUMBER(10,0) NOT NULL,
DPT_ID NUMBER(10,0) NOT NULL,
RSS_ID NUMBER(10,0) NOT NULL,
UNITS NUMBER(10,0)
The data is being displayed in APEX in a report region of type "SQL Query (PL/SQL function body returning SQL query)". And the following option has to be switched on "Use Generic Column Names (parse query at runtime only)".
This does give a restriction on the number of columns which can be used. You can however change the number of columns in the field "Maximum number of generic report columns:" to a high number. So in most cases this is no issue at all.
In the Region Source I did put the following code:
begin
return 'select *
from ( select rss.name "Resource"
, v_data_point_date_formated
, rpg.units
from evp_resources rss
, evp_data_points dpt
, evp_resource_planning rpg
where rpg.dpt_id = dpt.dpt_id
and rpg.rss_id = rss.rss_id
pivot (sum(units) for v_data_point_date_formated in (' ||
evp_pkg_dpm.f_dynamic_pivot_in ||
order by 1';
end;
The function evp_pkg_dpm.f_dynamic_pivot_in does return a string which is based on the number of rows in the table evp_data_points. In my case this string is: '13-08' as "13-08",'20-08' as "20-08",'27-08' as "27-08",'03-09' as "03-09",'10-09' as "10-09",'17-09' as "17-09",'24-09' as "24-09". If you ommit the 'as "..."' you do get quotes in your headings.
Enjoy and regards,
Jurgen
PS: let me know if something is missing or not clear!
Edited by: user553427 on Aug 17, 2012 5:46 AM (Query has been made more simple and I build up the header differently)

Clicking "Open a New Tab" button or "Ctrl+T" doesn't open a new tab any more. How do I get that functionality back?

Clicking "Open a New Tab" button or "Ctrl+T" doesn't open a new tab any more. How do I get that functionality back?
When I click, type or use the File menu or try right-clicking mouse to open a new tab, nothing happens. However I am able to open links in a new tab.

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.
How do I "disable" or "un-install it"?

I am using a Mac OS 10.9 and i can't type into a PDF form. I have adobe reader and another adobe product (adobe photoshop elements 12). Is there a way i can fill out a form and email?

I have adobe reader and adobe photoshop elements 12. I need to fill out an Adobe form, save it and email. I have tried creating a text box but the formatting is horrible. I need help please.
Thanks,
Eunice

It's a fillable form. I have Adobe Reader version 11.0.07. I was trying to fill the form, save and email. It is a public form and here's the link to the form: http://booksamillioninc.com/public/Revised_w_Gift_Card_info_2014-Donation_Policy_Procedure _and_Request_Form.pdf
I am unable to click/ type in the fields.
Thanks!
Eunice

Click event with modifiers

Hello,
I'm trying to select multiple lines of a matrix clicking on any fields of a row. I can capture the event of the click and select the line clicked, but I'm not able to select multiple lines that way. I need to select the lines with modifiers in mind. I can make a click in the first column to select the line too, but I don't know how to perform a click with modifiers.
Thanks in advance

I think this is not what Martin needs, but simulate a click with modifiers.
We have the same problem. The matrix selection mode is BoMatrixSelect.ms_Auto. What we want to do is that when any column is clicked, it will behave as it was clicked on firts column (the one that is able to select rows). The problem is that Shift or Control button could be pressed too, which should select more rows than the clicked one. We know how to handle the click event with modifiers, but we don´t know how to send a click on the first column with them.
We haven´t found any solution to this.
Regards,
Ibai Peñ

How to create CMPCTRL attribute of the type internal table (as global list)

Hi,
I want to create global internal table to be able to access it across all my webdynpro views.
Ideally I will create this global internal table in CMPCTRL and will add different values from diffent methods of one view and use in another view as table of values. So I am thinking to use CMPCTRL Attribute declaration to my make internal table as global internal table. How do I achieve this ? Please help
Thanks
Praveen

Thanks Aditya, But I am getting "comp_attr" unknown.
I am pasting here What I am doing, Please let me know ehere is the error?
CMPCTRL:
it_pod Public clicked, Type Clikced Assoc Type:Element_<node_name>.
View access
DATA lo_nd_<node_name> TYPE REF TO if_wd_context_node.
DATA lo_el_nd_<node_name> TYPE REF TO if_wd_context_element.
DATA ls_nd_<node_name> TYPE wd_this->Element_<node_name>.
data podetails TYPE TABLE OF WD_COMP_CONTROLLER->IT_POD.
Here it says IT_POD unknown. any issues?
Thanks
Praveen

Alternate column colors in SQL 2008 Matrix

I have a Matrix with dynamic columns. I am grouping Matrix on one column group. I am trying to have a different color for every group. I hvae so far, three groups. How can I do that? A note, there is no data for every column group in every row.

Hi,
Please try the below
1. Go the reports code window (Menu Report--> Report Properties--> code tab) and paste the below to create the function getGroupCounter
dim Counter as integer=0
public function getGroupCounter() as Integer
Counter=Counter+1
return Counter
end function
2. Go to the properties of the column group (Right click the column group and select group properties)
3. Click the variables tab on the left
4. Click on Add and set Name as GroupCountValue and set the expression (in the expression window) as =Code.getGroupCounter
This expression sets the group variable to hold its running count value.
5. Click OK
6. Now in the matrix, click the column handle (that selects the whole column) for the column group, in properties window, set the below expression for background color
=iif(Variables!GroupCountValue.Value mod 2 =0,"yellow","green")
This would display the alternate colors green and yellow for the columns
If you need to display different colors for each column, ten use the switch function, as shown below
=switch(Variables!GroupCountValue.Value=1, "yellow",Variables!GroupCountValue.Value=2,"green",Variables!GroupCountValue.Value=3,"red")
7. Run the report and observe the result.
Hope this helps. Feel free to discuss if you need any further help.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

How to get image in the matrix column.

Dear All,
                 I am using an add-on for displaying image in a matrix column. When user selects an item in the matrix, image corresponding to that item should be displayed in the matrix column. How can I do that.? Please help me regarding this. Any suggestion would be appreciated. Please provide a sample if you can provide.
Thanks & Regards
Ankit Chauhan

Hello freind
as my suggestion yu can developed it as in activity form like attechment folder.for that yu can create matrix feild type "genral and strcture like "Link" after that yu can give one browse button on which yu open show browser and when select on pertcular file .yu save the path in matrix row .after that when yu select perticlar row yu can link your image.use the logic of actvity form
by this code yu can open the browse to select the file
    Public Function FindFile() As String
        Dim ShowFolderBrowserThread As Threading.Thread
        Try
            ShowFolderBrowserThread = New Threading.Thread(AddressOf ShowFolderBrowser)
            If ShowFolderBrowserThread.ThreadState = System.Threading.ThreadState.Unstarted Then
                ShowFolderBrowserThread.SetApartmentState(System.Threading.ApartmentState.STA)
                ShowFolderBrowserThread.Start()
            ElseIf ShowFolderBrowserThread.ThreadState = System.Threading.ThreadState.Stopped Then
                ShowFolderBrowserThread.Start()
                ShowFolderBrowserThread.Join()
            End If
            While ShowFolderBrowserThread.ThreadState = Threading.ThreadState.Running
                System.Windows.Forms.Application.DoEvents()
            End While
            If FileName <> "" Then
                Return FileName
            End If
        Catch ex As Exception
            objMain.objApplication.MessageBox("FileFile" & ex.Message)
        End Try
        Return ""
    End Function

Matrix - Click Type ct_linked

Similar Messages

Maybe you are looking for