"enable" the Virtual Adapter

Under Vista with VPN Client 5.0.01.0600 I always have to go into Manage Network connections and "enable" the Virtual Adapter. Why can't the virtual adapter just stay enabled?
UAC and Windows firewall are disabled, I'm logged in as full administrator.

There is not a newer version of VPN Client than this, seems to coorelate to when I close my lid and laptop goes into sleep and then awakes later. Sometimes I have to reboot for the Virtual Adapter to stay enabled. I'll enable it and hit F5 and it will be back at Disabled. Most of the time it stays Enabled. No Firewalls and I don't think AV would Disable a Virtual Adapter, my wireless or ethernet never Disable. Annoying caveat!
Jason Aarons
MCSE/CCVP/CCNP/CCDP

Similar Messages

  • Reason 442: Failed to Enable Virtual Adapter - Windows 7 64 bit

    Some details about the issue.
    I'm trying to connect to my client's network using VPN Client version 5.0.07.0290. The user authetication is done by providing RSA SecureID token value. After entering proper credentials, the client window gets struck at 'Securing Communication Channels...' message in status bar and reports 'Reason 442: Failed to Enable Virtual Adapter' error after few mintues. I have confirmed that this version works for other people in my team , so I'm guessing it has something to do with my system settings than the client itself.
    Below are the trobleshooting tips that I have already tried.
    1. Uninstall and Reinstall the client.
    2. Enable WinXP SP2 compatability for ipsecdialer.exe and vpngui.exe.
    3. Clicking 'Diagnose' on the Citrix Virtaul Adapter connection in Networks and Sharing centre, reports no issues.
    4. Enabling Network sharing for Local Area Network and disaling Wireless Networks
    I'm running Windows 7 64 bit Enterpise OS.
    Appreciate any suggestions to resolve this issue.
    Thanks,
    PVNSKC
    Update: 9/7/2011
    OK, things look much better after a good vacation, always!!!
    I tried to connect today by reinstalling the client after a weekend shutdown (I don't believe the cold reboot stuff, but hey, worth a try! ) and it did work. The only change I did today was to disable the Wireless Connection adapter in Networks Connections. I'm not sure whether that fixed or not cause I had tried that already. Anyway, below is my current configuration which is working for now!
    1. Below executables are running in the XP compatability mode.
    cvpnd.exe, VAInst64.exe, vpngui.exe
    2. Local Area Connection is allowed for 'Sharing'
    3.  Registry is updated with below entry.
    HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
    4. Wireless Connection is disabled.
    Thank you all for the responses.
    PVNSKC

    Hi,
    Duplicate IP Address Triggers Error 442 on Windows 7 and Vista
    The following error "Reason 442: failed to enable virtual adapter"  appears after Windows 7 and Vista reports a duplicate IP address  detected. Subsequent connections fail with same message, but the OS does  not report a duplicate IP address detected.
    To work around error 442, do the following steps:
    Step 1 Open "Network and Sharing Center".
    Step 2 Select "Manage Network Connections".
    Step 3 Enable the Virtual Adapter ("VA"—Cisco VPN Adapter).
    Step 4 Right-click on Cisco VPN Adapter and select "Diagnose" from the context menu.
    Step 5 Select "Reset the network adapter Local Area Connection X".
    If this procedure does not work, run the following command from cmd:
    reg add HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
    Then reboot.
    This resolves the issue until the OS reports a duplicate IP address again. Follow the preceding steps to resolve it again.
    If that doesn't work, you might have UAC enabled. If so, you must run  cmd as administrator and repeat the previous registry workaround.
    NOTE: You mentioned step 4 already, try the whole sequence again, if the steps does not work then try the registry key.
    Hope this helps,
    Sian

  • Failed to enable Virtual Adapter in Windows 8

    Hello
    I got a problem when using Cisco VPN client 5.0.04.0300 in Windows 8...today
    Error as following:
    Reason 442: Failed to enable Virtual Adapter.
    Logs here:
    1      20:48:21.787  03/01/12  Sev=Warning/3         CVPND/0xE340000C
    The Client was unable to enable the Virtual Adapter because it could not open the device.
    2      20:48:21.807  03/01/12  Sev=Warning/3         CVPND/0xE340000C
    The Client was unable to enable the Virtual Adapter because it could not open the device.
    3      20:48:21.807  03/01/12  Sev=Warning/2         IKE/0xE300009B
    Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
    4      20:48:21.807  03/01/12  Sev=Warning/2         IKE/0xE30000A7
    Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
    I'm using a laptop which belongs to the company...this is really urgent.
    Can anybody help me!!?
    Really appreciate any feedback!!!
    Snail

    thank you so much for your reply.
    I'm considering to restore to Windows 7 cuz I use those apps very offen..
    thanks again...

  • 64bit vpn client issue /error :reason -442:failed to enable virtual adapter.

    Hi All of you ,
    I m using vpn client for windows64bit  -  file name - vpnclient-winx64-msi-5.0.07.0290-k9.exe and installing it on windows 2003 server .
    But while connecting via vpn client to f/w , Virtual Adapter is taking the ip address but not connecting .getting error message on screen -
    reason -442:failed to enable virtual adapter.
    Is it possible some configuration or image issue from ASA as its first time we are trying to use 64bit OS , vpn client for 32bit OS working fine .
    Below are the logs from vpn clinet when i tried to connect to ASA5520 . Version 7.0(8) -
    Cisco Systems VPN Client Version 5.0.07.0290
    Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
    Client Type(s): Windows, WinNT
    Running on: 5.2.3790 Service Pack 2
    Config file directory: C:\Program Files (x86)\Cisco Systems\VPN Client\
    1      15:38:03.921  01/27/11  Sev=Info/4 CM/0x63100002
    Begin connection process
    2      15:38:03.937  01/27/11  Sev=Info/4 CM/0x63100004
    Establish secure connection
    3      15:38:03.937  01/27/11  Sev=Info/4 CM/0x63100024
    Attempt connection with server "203.199.30.190"
    4      15:38:04.125  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    5      15:38:04.140  01/27/11  Sev=Info/4 CM/0x63100015
    Launch xAuth application
    6      15:38:09.515  01/27/11  Sev=Info/4 CM/0x63100017
    xAuth application returned
    7      15:38:09.515  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
    8      15:38:10.562  01/27/11  Sev=Info/4 CM/0x63100019
    Mode Config data received
    9      15:38:10.781  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to enable the 64-bit VA after timeout
    10     15:38:10.781  01/27/11  Sev=Warning/3 CVPND/0xE3400029
    The Client failed to enable the Virtual Adapter on 64-bit Windows
    11     15:38:10.781  01/27/11  Sev=Warning/2 CM/0xE310000A
    The virtual adapter failed to enable
    12     15:38:10.781  01/27/11  Sev=Info/6 CM/0x6310003A
    Unable to restore route changes from file.
    13     15:38:10.781  01/27/11  Sev=Info/6 CM/0x63100037
    The routing table was returned to original state prior to Virtual Adapter
    14     15:38:10.859  01/27/11  Sev=Info/4 CM/0x63100035
    The Virtual Adapter was disabled
    15     15:38:10.859  01/27/11  Sev=Warning/2 IKE/0xE300009B
    Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
    16     15:38:10.859  01/27/11  Sev=Warning/2 IKE/0xE30000A7
    Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
    17     15:38:11.546  01/27/11  Sev=Info/4 CM/0x63100012
    Phase 1 SA deleted before first Phase 2 SA is up cause by "Unknown".  0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    18     15:38:11.546  01/27/11  Sev=Info/5 CM/0x63100025
    Initializing CVPNDrv
    19     15:38:11.578  01/27/11  Sev=Info/6 CM/0x63100046
    Set tunnel established flag in registry to 0.
    20     15:38:40.953  01/27/11  Sev=Info/4 CM/0x63100002
    Begin connection process
    21     15:38:40.953  01/27/11  Sev=Warning/2 CVPND/0xA3400019
    Error binding socket: -21. (DRVIFACE:1234)
    22     15:38:40.968  01/27/11  Sev=Info/4 CM/0x63100004
    Establish secure connection
    23     15:38:40.968  01/27/11  Sev=Info/4 CM/0x63100024
    Attempt connection with server "203.199.30.190"
    24     15:38:41.156  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    25     15:38:41.171  01/27/11  Sev=Info/4 CM/0x63100015
    Launch xAuth application
    26     15:39:08.031  01/27/11  Sev=Info/4 CM/0x63100017
    xAuth application returned
    27     15:39:08.046  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
    28     15:39:09.093  01/27/11  Sev=Info/4 CM/0x63100019
    Mode Config data received
    29     15:39:09.312  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    30     15:39:09.312  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    31     15:39:19.937  01/27/11  Sev=Warning/3 CVPND/0xA340000D
    The virtual adapter was not recognized by the operating system.
    32     15:39:19.937  01/27/11  Sev=Warning/2 CM/0xE310000A
    The virtual adapter failed to enable
    33     15:39:19.937  01/27/11  Sev=Info/6 CM/0x6310003A
    Unable to restore route changes from file.
    34     15:39:19.937  01/27/11  Sev=Info/6 CM/0x63100037
    The routing table was returned to original state prior to Virtual Adapter
    35     15:39:20.109  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    36     15:39:20.109  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    37     15:39:20.281  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    38     15:39:20.281  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    39     15:39:20.578  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    40     15:39:20.578  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    41     15:39:20.953  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    42     15:39:20.953  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    43     15:39:21.437  01/27/11  Sev=Info/4 CM/0x63100035
    The Virtual Adapter was disabled
    44     15:39:21.437  01/27/11  Sev=Warning/2 IKE/0xE300009B
    Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
    45     15:39:21.437  01/27/11  Sev=Warning/2 IKE/0xE30000A7
    Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
    46     15:39:22.046  01/27/11  Sev=Info/4 CM/0x63100012
    Phase 1 SA deleted before first Phase 2 SA is up cause by "Unknown".  0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    47     15:39:22.046  01/27/11  Sev=Info/5 CM/0x63100025
    Initializing CVPNDrv
    48     15:39:22.062  01/27/11  Sev=Info/6 CM/0x63100046
    Set tunnel established flag in registry to 0.
    release notes for vpn client 64bit  -
    http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

    Hi Anisha ,
    Exact version of OS is "Microsoft Windows Server 2003 x64"  .
    I need supported cisco vpn client for this OS .
    =========
    Thanx 4 reply .
    Raj

  • Reason 442: Failed to enable Virtual Adapter

    I've installed version 4.8.02.0010 of the VPN client onto a Dell Latitude D820 laptop. When I attempt to connect, I get this message. There are no firewalls running (I disabled the Windows XP firewall) and I'm running under Service Pack 2 with all of the latest security patches from Microsoft.
    I even tried un-installing the client and using an older version (4.8.00.0440) and it reports a similar error in the Log file.
    I'd prefer to NOT have to wipe the laptop and reinstall the O/S if I don't have to. This is the only laptop that I've experienced this problem with but it's also the first Dell Latitude D820 that I've attempted to install the client on.
    Is there a problem with the Dell Latitudes and the VPN Client? Is there another way around this other than a wipe and re-install?
    I've already tried replacing the profiles and still get the same problem.

    Hi,
    There is another thing that you can try temporarily.
    Goto device manager on the computer and manually enable the virtual adapter and see if it works.
    There might be some other adapters / softwares installed that you might have uninstall. Those could be some wireless adapters, personal firewall or internet security package, any other kind of adapter that you installed after installing the VPN cliemt.
    HTH,
    Kamal

  • Vista, Cisco VPN Client 5.0.01.0600 "Failed to enable Virtual Adapter"

    Four times out of five when trying to connect with the VPN client on Vista Business I get a message that the Virtual adapter cannot be enabled.
    When checking the logs there are two entries that always is seen together with this failure:
    123 09:21:36.026 12/27/07 Sev=Warning/2 CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: unable CreateUnicastIpAddressEntry, error 0
    129 09:21:55.709 12/27/07 Sev=Warning/3 CVPND/0xA340001A
    Failed to find VA MAC Address
    Anyone else who have seen this issue on Vista?

    Hi Magnus
    Uninstall VPN client. Restart the PC
    Donwload and run the following software, then restart the PC
    http://www.softpedia.com/get/Tweak/Network-Tweak/WinSockFix.shtml
    Reinstall VPN client
    Regards

  • Hyper-V Failover Cluster Live migration over Virtual Adapter

    Hello,
    Currently we have a test environment 3 HyperHost wich have 2 Nic teams.  LAN team and team Live/Mngt.
    In Hyper-V we created a Virtual Switch (Wich is Nic team Live/Mngt)
    We want to seperate the Mngt and live with Vlans. To do this we created 2 virtual adapters. Mngt and Live, assigned ip adresses and 2 vlans(Mngt 10, Live 20)
    Now here is our problem: In Failover cluster you cannot select the Virtual Adapter(live). Only the Virtual Switch wich both are on. Meaning live migration simple uses the vSwitch instead of the Virtual adapter.
    Either its not possible to seperate Live migration with a Vlan this way or maybe there are Powershell commands to add Live migration to a Virtual adapter?
    Greetings Selmer

    It can be done in PowerShell but it's not intuitive.
    In Failover Cluster Manager, right-click Networks and you'll find this:
    Click Live Migration Settings and you'll find this:
    Checked networks are allowed to carry traffic. Networks higher in the list are preferred.
    Eric Siron
    Altaro Hyper-V Blog
    I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.

  • After Installing Oracle Virtual Box and changing the network adapter to bridged mode cant access my server

    Hi ,
    I have installed Oracle Virtual box on windows server 2008 r2 hosted on 1und1.de.
    Till installtion and setting up untun on virtualbox it was fine, but once i changed the adapater to bridged mode. I immediatly lost connectivity with my server and now cant access.
    It is now 2 days i cant access my server and neither ping it, also the website hosted on it is also down.
    The 1und1 has following 2 options
    1) using putty i can connect to server command prompt using administrator but cant run any gui application
    2) Server Rescue mode: where i get special environment to start, stop services, access registry and command prompt.
    Till now i have tried lot of setting to enable network connectivity but not able to success
    This is the result of Ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : s15453760
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter VirtualBox Host-Only Network:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
       Physical Address. . . . . . . . . : 08-00-27-00-04-FD
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::5d5c:5bbc:c61:e9b1%16(Preferred)
       Autoconfiguration IPv4 Address. . : 169.254.233.177(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 352845863
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-B9-51-EA-00-19-99-A5-E7-BE
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{BBF9AA14-45EA-460C-8F23-E106D890D878}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft 6to4 Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 12:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    How can i restore my connection.
    Thanks

    Hi,
    According to the result of "ipconfig /all", the physical adapter dosen't appear.
    Please check if the physical network adapter works properly. We can verify this in Device Manager.
    To open Device Manager by using the Windows interface
    Click Start, and then click Control Panel.
    Click Hardware and Sound.
    Click Device Manager.
    If the network adapter is working properly, please make sure that the Internet Protocol Version 4(TCP/IPv4) has been checked in the properties of the physical network adapter.
    If issue persists, please try to uninstall the Oracle Virtual box.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • When using Parallels for Windows 7, I cannot connect to Wi-Fi. I get drop down menu "Real Network Adapter Thunderbolt Bridge used by Virtual Adapter 1 is not connected to the network". How do I fix?

    When I try to connect to internet wirelessly (Parallels/Windows 7 on my Mac Pro) I get a drop down that says "Real Network adapter thunderbolt bridge used by virtual adapter 1 is not connected to the network". I can not figure out how to connect - any help is appreciated!

    Since you are having trouble with Parallels or Windows, did you ask in their respective support forums? If not, you might want to consider doing so.

  • How to enable the Archive faulty source file in File adapter

    Dear XI expert,
    I want to enable the Archive Faultly source file, when the exchange step detects any error then move the source file to the ERROR folder.
    I've already applied patch XI ADAPTER FRAMEWORK CORE 7.00 SP10 but haven't seen anythings about this function.
    Best regards,
    Kobsak

    Hi,
    Check out this link for info on how to archive the file.
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    Regards,
    Vikram

  • How enable my AMD adapter using the device manager

    The message that comes up after updating my AMD driver is this:
    The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter.  Please update your AMD graphics driver, or enable your AMD adapter using the Displays Manager. 
    I am running Windows 7 Home premium
    HP Pavilion DV 7 notebook pc
    Intel Graphics 3000
    Radeon HD 6490M
    please help

    I'm new to this
    What is the solution?

  • Should FTP on the system be ENABLED for SFTP Adapter to work from BPEL Code

    Hi,
    I am trying to SFTP files from server1 to server2. I am getting the below fault message,
    faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Unable to read response. Unable to read response. Unable to read response from host: earth.as.local Please make sure that the ftp server settings are correct and that the ftp server is up. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary> ,detail=<detail>Read timed out</detail> ,code=<code>null</code>}
    I have configured FTP Adapter JNDI name and other details correctly,
    hostname, username, password, usesftp(true),port(22).
    On the server2, the FTP was disabled and was getting the aforesaid error.
    But when we enabled FTP on server2, the SFTP started working fine with the same configurations of JNDI.
    So, to conclude, Should FTP on the system be ENABLED for SFTP Adapter to work from SOA BPEL Code?
    Please give your valuable comments and suggestions.
    Thanks & Regards,
    Nagaraj Ganapa

    Yes, if you are trying to write a file using SFTP/FTP to any machine, a SFTP/FTP server should be running on that machine and there should be a process listening on the correct port(22/21). This is true for any other application as well and not just for Oracle BPEL. You can not send a file to a server using SFTP/FTP when the FTP/SFTP process is not running on that server.

  • Vritual Fibel adapter failed to start the Virtual Machine

    Hi All,
    I have installed windows server 2012 R2 RTM with Hyper-V. I have created virtual machine with virtual fiber channel adapter connected to physical one. When I start the virtual machine it gets failed to start and the following error occurs.
    Thanks,

    take a lool on that
    http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
    I guess also that some Part of the Chain do not Support all needed Settings like NPIV.
    dealing with vFC inside a Guest ist really tricky and following Support Matrix is really key, it starts on the FCP SAN Array and Ends up having the latest Hotfixes regarding vFC Problems. Between you need to have all Setup right and supported Drivers,
    FW and so on.
    In my view using this Feature you loss the my most Importent Sexy Thing why i do Virtualisation ? beeing seperate from the HW Layer.
    Udo

  • 442 Error - Failed to enable Virtual Adapter

    Windows 8, I am  trying to connect on VPN and I only receive this error : 442 - Failed to enable Virtual Adapter.

    Install Citrix Deterministic Network Enhancer to solve Cisco IPSec VPN issue with Windows 8/8.1. Check below guide,
    http://www.vmwareandme.com/2013/12/solved-windows-8-and-windows-81-cisco.html
    www.mytricks.in

  • I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV.  Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions

    I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV.  Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions

    just  the audio, eh?. If you were using DVI or DisplayPort that might be different, but for audio alone, it shouldn't be that hard.  Just grab a 3.5 mm stereo plug to 2 rca cables adapter. Plug the smaller end into the back of your Mac Pro (or the Front), where you see either the headphone or speaker icon). Alt-click on the speaker icon at the top of your screen to show all audio inputs and outputs. Make sure it's set to Line Out.  Plug the red and white end into the audio in jacks on the back of your tv and set it to the correct input. I don't know if your tv will allow just the audio to play. Usually one has to connect up something else, but hopefully I'm wrong.  If you were using DVI, or DisplayPort, you'd need an active DVI--HDMI adapter or a DisplayPort to HDMI adapter, but
    I don't know for sure
    J  B  

Maybe you are looking for