Enabling ALV in SAP delivered reports
Is there a way to "enable" ALV in some SAP delivered reports? Functionals are asking for this feature. See below:
Brazil has enabled the ALV grid control on some of the SAP canned reports. Example: tcode ME2L. Our corporate purchasing associates like this feature and would like to have it turned on in our SAP instance. Can you [ ]see the extent of the work that it would take to turn this on for this report?
Gary,
in the selection screen press F4 on field [Scope of list]. In the dialog press the create button. Than you will go to customizing through project or without project.
Than you could define scope of list. In the definiton you could customize the settings for ALV grid.
After that you have to select the scope of list at running the report.
path in IMG:
Materials Management/Purchasing/Reporting/Maintain Purchasing Lists/Scope of List/Define Scope of List.
Similar Messages
-
Please Help .... in identifying(SAP Delivered): Reports for Invoice-to-Cash
Hi,
I will be at a meeting to help gather requirements for a project in relation to Invoice-to-Cash.
Can you guide me to get the following information:
1. a high level list of reports for Invoice-to-Cash
2. a detail list of reports for Invoice-to-Cash
3. To see the SAP deleivered data flow to give me an idea of the extractors, DSOs, Cubes(dimensions...), etc.
Also, apart from your experience, is there a process to get this information for any requirement in general? I went to BI Content in rsa1 on our development system hoping to see some reports related to Invoice-to-Cash but to no avail?
Thanks
Edited by: Amanda Baah on Apr 24, 2009 8:36 AMHi,
invoice to cash is basically a sub process of the process: Customer Order to point of receiving Cash from Customer.
So, Invoice to cash as used in my original post actually is: The point at which Customer Invoice was issued to the point at which Cash was received.
So back to my original question, can you guide me to get the following information:
1. a high level list of reports for Invoice-to-Cash
2. a detail list of reports for Invoice-to-Cash
3. To see the SAP deleivered data flow to give me an idea of the extractors, DSOs, Cubes(dimensions...), etc.
Also, apart from your experience, is there a process to get this information for any requirement in general? I went to BI Content in rsa1 on our development system hoping to see some reports related to Invoice-to-Cash but to no avail?
Thanks
Edited by: Amanda Baah on Apr 27, 2009 9:35 AM -
Using the latest version of SAP standard reports
After trouble shooting several problems in Report Painter reports, I noticed we are not using the most updated version of SAP delivered reports. We upgraded from 46c to ECC6 last year. Is there some regeneration (of report groups) procedures we were supposed to do to bring standard reports in line during upgrade?
What is the best way to review thel version of all reports currently used?
What about those reports created from coping SAP standard reports, if standard reports get updated, how can the copied report be updated as well?
Thanks in advance for any feedback.No answer, not yet resolved but I close this message for now.
-
Column-clipping behavior of FIND from SAP-delivered ALV toolbar
I have an ALV display whose rows start with three short columns followed by one pretty long column.
The customers want to use the FIND button from the standard SAP ALV toolbar to search for substrings in the text that's in the long column.
The find is working fine, but when the result is displayed, the layout is clipped so that only the long text column shows. Furthermore, you can't window to see the three leading columns - it's like a different display.
Is there an SAP-delivered parameter that will successfully tune this behavior so that the result of the FIND uses the original layout?
If not, has anyone written a custom FIND implementation that will not behave this way ???
Thanks
djhI've learned that this can be eliminated by right-clicking the ALV container anywhere and selecting "optimize width".
I've started a separate question about whether this option can be preset.
Dave -
SAP Standard reports Output in ALV
Hi Folks,
I have a report MKVZ which is showing the output in a LIST DISPLAY.Is there anyway that I can see this SAP Standard report output in ALV(not by Coding).
Thanks,
K.Kiran.No Dear you can't see this report in ALV, as this report is genrated in List view using write statements.
what best you can do is, u can download the final internal table into excel file or
you have to change by copying the proogram.
reward if useful
Amit Singla -
SAP Query - Reporting on Simulation infotype 2501
We defined reporting time types for the SAP delivered infotype 2501 to report from the ZL cluster. However, when we report the data using SAP Query, for a few records, the following is observed:
(1) Basic list output in Query report splits the record as only 50% (half) of the time is output when compared to the data in the cluster.
(2) If you also use the same field in a Statistics output, it seems to report the full amount of time as recorded in the cluster.
The discrepancy is noticed only in a very few records reported by SAP Query. We need to be absolutely sure as to why some records are not reported accurately by SAP query basic list output for the simulated infotype.
I would appreciate your help
Thanks
PascalHi Pascal,
Since the IT2501 is a "Simulated Time Infotype" you cannot look at the data in it, but you can confirm the data from the ZL cluster and the data from the employee. Since it is only this employee or a few employees, it is probably not the configuration of the time buckets for the IT2501, but you may want to make sure all time times are captured as you want. Then look at the time entries for this individual or individuals. Did they enter a time type that was not expected or configured? Is all their time approved and passed through Time Evaluation? Finally check the Master Data for the employee - is the Planned Working Time (IT0007) infotype correct or has it been recently changed? Is he in a special Cost Center (IT0027) or Project that is captured differently for time purposes?
Since it just one or a few individuals, I would suspect the Master Data and some inconsistant entry that affects the time cummulation for the IT2501.
Paul -
Want to convert Sap standard report into alvgrid
HI PLEASE HELP THIS IS CODE BELOW OF SAP STANDARD REPORT CODE WANT TO CONVERT INTO ALVGRID
LEAS HELP
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
EHi Laxman,
I have checked the program and found out following:
the field "acc_mode" which gets populated by FM "GET_ACCESSIBILITY_MODE".
If this field is initial, then normal list gets displayed and
If this field has value, then ALV grid gets displayed.
regards,
Dharitree -
I am trying to enable SNC on SAP Server. I have downloaded the SAP Cryptographic library and installed it as per in the instructions in http://help.sap.com/saphelp_erp2004/helpdata/en/96/709b3ad94e8a3de10000000a11402f/frameset.htm
Using STRUST transaction I created a PSE for SNC.
I have modified with the instance profile (using RZ10 transation) and specified the following values
snc/enable - 1
snc/accept_insecure_rfc -1
snc/accept_insecure_gui - 0
snc/accept_insecure_cpic -1
snc/permit_insecure_start -1
snc/data_protection/min - 2
snc/extid_login_diag -1
snc/extid_login_rfc - 1
and restarted the SAP Server.
I got the following error
trc file: "dev_w7", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Nov 16 18:44:31 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 5840
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 7 5840) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F90040, size: 3192688)
M DpShMCreate: allocated sys_adm at 05F90040
M DpShMCreate: allocated wp_adm at 05F91B58
M DpShMCreate: allocated tm_adm_list at 05F94478
M DpShMCreate: allocated tm_adm at 05F944A0
M DpShMCreate: allocated wp_ca_adm at 0623B0E8
M DpShMCreate: allocated appc_ca_adm at 06240EA8
M DpShMCreate: allocated comm_adm_list at 06242DE8
M DpShMCreate: allocated comm_adm at 06242E00
M DpShMCreate: allocated vmc_adm_list at 06289AD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06289AF8
M DpShMCreate: allocated wall_adm at 06289B00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Nov 16 18:44:32 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 43
C patchcomment View with literal containing (0x60) (786638)
C np:(local) connection used on SAP50UNI
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:33 2007
C Provider Release:08.10.1830
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:44 2007
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes
C Using shared procedure name cache SAP50UNI_EUCEUC_EUC_MEM initialized by another process.
C Connected to db server : [SAP50UNI] server_used : [np:(local)], dbname: EUC, dbuser: euc
C pn_id:SAP50UNI_EUCEUC_EUC
C Not using MARS (on sql 8.0)
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20071116 184432 SAP50UNI
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Fri Nov 16 18:44:52 2007
I MtxInit: 7 0 0
M SHM_PRES_BUF (addr: 0A650040, size: 4400000)
M SHM_ROLL_AREA (addr: 5F030040, size: 159744000)
M SHM_PAGING_AREA (addr: 0AA90040, size: 72089600)
M SHM_ROLL_ADM (addr: 0EF60040, size: 1595440)
M SHM_PAGING_ADM (addr: 0F0F0040, size: 525344)
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F180040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 08060040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 140600C8, size: 30000000, end: 15CFC448)
B dbtbxbuf: Buffer TABLP (addr: 15D000C8, size: 10240000, end: 166C40C8)
B dbexpbuf: Buffer EIBUF (addr: 166D00D0, size: 4194304, end: 16AD00D0)
B dbexpbuf: Buffer ESM (addr: 16AE00D0, size: 4194304, end: 16EE00D0)
B dbexpbuf: Buffer CUA (addr: 0FC300D0, size: 3072000, end: 0FF1E0D0)
B dbexpbuf: Buffer OTR (addr: 16EF00D0, size: 4194304, end: 172F00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): Trying builtin default as a
N gssapi library name: "sncgss32.dll".
<b>N SncInit(): snc/gssapi_lib UNDEFINED in profile!
N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
<b>M *** ERROR => DlLoadLib: LoadLibrary(sncgss32.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded</b></b>
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 7
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 7 5840) [dpnttool.c 357]
I am unable to connect to SAP Server using SAP GUI.
Any help on this is appreciated.
Thanksyou have two problems (read the log):
> C Failed to initialize provider SQLNCLI. See note
> #734034 for more information.
> C Using provider SQLOLEDB instead.
> C OpenOledbConnection: Failed to set MARS property.
Check the mentioned note.
> SncInit(): Trying builtin default as a
> gssapi library name: "sncgss32.dll".
> ncInit(): snc/gssapi_lib UNDEFINED in profile!
> N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
> <b>M *** ERROR => DlLoadLib:
> LoadLibrary(sncgss32.dll) Error 126 [dlnt.c
> 237]
> Error 126 = "The specified module could not be
> found."
> *** ERROR => SncPDLInit():
> DlLoadLib("sncgss32.dll")=DLENOACCESS
> [sncxxdl.0340]*** ERROR =>
> SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll
> not loaded</b></b>
> N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
> N sec_avail = "false"
> M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001)
> [thxxsnc.c 223]
> M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT)
> [thxxsnc.c 225]
> M in_ThErrHandle: 1
> M *** ERROR => SncInitU (step 1, th_errno 44, action
> 3, level 1) [thxxhead.c 9413]
the log clearly sais, what to do... what is unclear?
Markus -
Want to convert Sap standard report s_alr_87012085 into alvgrid
i Want to convert Sap standard report s_alr_87012085 into alvgrid please help me.
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
nichts zu tun
ENDIF.
ENDIF.
END -
Custom transaction attached to SAP delivered code
HI
We have a requirement that all custom program and transactions are secure. Usually we have the developers add an auth check statement to the program and add that check to the custom t-code in SU24.
today I have the situation that we are using SAP delivered code and attaching a custom transaction. Since we don't want to modify the SAP code, how is it possible to get any check on the transaction? I know that SU24 won't force the check unless the program is changed. So is there any way to have any type of auth object checked? Or is this a situation where no check would be needed and no objects added to the role when the new tcode is added? (SE93?)
Hope that makes sense!
Thanks
BobbiHere is where I run into problems. I am not a developer and have a hard time reading the code. This particular report is to display vendor address data. As far as I can tell I do not see anything that appears to be authority checks.
This is the top level of the code:
report AQZZZVEND=======ZVEND_ADDR====.
include /1BCDWB/IQG000000000055DAT.
data %dtab type standard table of /1BCDWB/IQG000000000055 with header line.
data %subrc type sy-subrc.
include /1BCDWB/IQG000000000055SSCR.
include /1BCDWB/IQG000000000055SSCRAT.
start-of-selection.
if %runmode-extr_on <> space.
call function '/1BCDWB/IQG000000000055EXTR'
tables %selopt = %seloptions
%dtab = %dtab
changing %rtmode = %runmode
exceptions no_data = 1
others = 2.
%subrc = sy-subrc.
call function 'RSAQRT_CHECK_EXTR'
exporting extr_subrc = %subrc
tables dtab = %dtab
changing rtmode = %runmode.
endif.
end-of-selection.
if %runmode-show_on <> space.
call function '/1BCDWB/IQG000000000055SHOW'
tables %dtab = %dtab
changing %rtmode = %runmode.
endif.
special code for old API and BW extractor calls
form %set_data changing p_lines type i.
import ldata to %dtab from memory id 'AQLISTDATA'.
describe table %dtab lines p_lines.
free memory id 'AQLISTDATA'.
endform.
form %get_data tables p_dtab structure %dtab
using p_first type i
p_last type i.
append lines of %dtab from p_first to p_last to p_dtab.
endform.
form %get_ref_to_table using p_lid type aql_lid
p_ref type ref to data
p_subrc type i.
if p_lid = %iqid-lid.
create data p_ref like %dtab[].
p_subrc = 0.
else.
p_subrc = 4.
endif.
endform.
================================================================================================
The abaper doesn't seem to understand what I am asking of him so I am stuck. It appears this custom transaction will go in without any checks on it unless you can perhaps advise me on how to proceed. Any help is appreciated. -
Delete SAP Delivered Services in t-code SOLUTION_MANAGER
Hello,
How can I delete the list of SAP Delivered Services in t-code solution_manager?
Operations -> Service Plan -> SAP Delivered Services.
I have a list of services 'Ordered by customer' with workbench status 'Initial'. These are not valid anymore and none exist with SAP.
CheersHello,
Firstly you need to figure out how these services were created in the first place.
To delete sessions you can use the report RDSMOPREDUCEDATA.
Important:
For step 3 in the deletion report select: "ALL SESSION TYPES"
For step 6: make sure that the checkbox is NOT select, so that you can
get an overview of the sessions before the deletion is processed.
Incase the Services were created but the corresponding sessions were not created corectly you would not be able to delete the services. The safest way in this case would be to open an Message with SAP for the cleanup.
If you are an expert in Solution Manager then you can clean up by deleting the entries directly in the tabl DSMOPSERSESSION. However this is NOT an recommended way of doing it.
If the report does not help then open an message with SAP. Safe and Sure way of getting rid of the sessions.
Regards
Amit -
Sap ABAP report cann't call excel which is installed actually.
Hi experts:
When I try to run a sap abap report to show data by calling Excel, a message popped up saying that "Excel has not been installed", however It has been installed on my computer and this error doesn't happen to my collegues, would you please give me a hint why it happened?
FrankHi,
Is it an ALV report....where u wanna see the data in excel format or U r using some other reportin to download data to excel sheet....be clear....
Solution::::::::
if its an ALV report...go to EXCEL->TOOL> MACRO>SECURITY>TRUSTED PUBLISHERS tab-->select the chk box "TRUST ACCESS TO VISUAL BASIC PROJECTS"....
Thins it may solve ur issue...
Reward all helpful answers.
Thanks. -
SAP Delivered Variable "0DAT" issue
Hi Experts,
I am not able to use the SAP Delivered Variable "0DAT - Current Date" on 2 different objects. One is a standard characteristic and other one is a RKF. I am receiving an error mesaage stating that I cannot use the variable on 2 different characteristics. Can anyone please explain why is this happening?
Thanks,
SBHi Frederic,
I tried using a Custom variable i created on 2 different objects in the same query and it still says that I cannot use the custom variable. You mentioned that I may be missing some functionality in BEx? Can you please elaborate on that? I would definitely like to apply any OSS notes if available because most of my reports use the same variable on different objects like the "Key Date" variable is supposed be used on Posting Date, Billing Date, Move in Date,...
Thanks,
SB. -
Hi there,
I'm new to SAP Finantials and i do not have access to the sap menu to check o Information Systems wich are the SAP Standard Reports for FICO. Could you help me on finding the names of these standard reports both for receivables and payables?
Thanks in advance,
Marc1. Structured Account Balances (Balance Sheet & P&L Account in FS Version Format) S_ALR_87012279
2. GL Account Balances (Totals & Balances ) S_ALR_87012301
3. GL Line Items S_ALR_87012282
4. Statements for GL Accounts, Customers & Vendors S_ALR_87012332
5. Document Journal S_ALR_87012287
6. Compact Document Journal S_ALR_87012289
7. Line Item Journal S_ALR_87012291 8. Display of Changed Documents S_ALR_87012293
9. Invoice Numbers assigned Twice S_ALR_87012341
10. Gaps in Document Number Assignments S_ALR_87012342
11. Posting Totals Document Type wise S_ALR_87012344
12. Recurring Entry Documents S_ALR_87012346
13. Chart of Accounts S_AL:R_87012326
14. GL Account List S_AL:R_87012328
15. Display Changes to GL Accounts S_ALR_87012308
16. Financial Statement Version FSE2 CASH & BANK REPORTS
1. Check Information List FCH6
2. Check Register FCHN
3. Check Number Ranges S_P99_41000102
TAX REPORTS & REGISTERS
1. List of Internally generated Excise Invoices J1I7
2. Capital Goods Transfer of Credit J2I8
3. List of GRs without Excise Invoice J1IGR
4. List of SubContract Challans J1IFR
5. CENVAT Register J2I9
ACCOUNTS RECEIVABLE
1. Bill Holdings (Bill of Exchange Receivable List with ALV facility)
S-ALR_87009987
2. Customer Balances in Local Currency S_ALR_87012172
3. Customer Line Items S_ALR_87012197
4. Due Dates Analysis for Open Items S_ALR_87012168
5. List of Customer Open Items S_ALR_87012173
6. Customer Evaluation with Open Item Sorted List S_ALR_87012176
7. Customer Payment History S_ALR_87012177
8. Customer Open Item Analysis (Overdue Items Balance) S_ALR_87012178
9. List of Customer Cleared Line Items S_ALR_87012198
10.List of Down Payments open at key date S_ALR_87012199
11. Debit & Credit Notes Register u2013 Monthly S_ALR_87012287
12. Customer wise Sales S_ALR_87012186
1. Vendor Balances S_ALR_87012082
2. Vendor Debit/Credit Memo Register S_ALR_87012287 -
Excel Download of a Web SAP BW Report asks userid and password.please help
Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
PavanHi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal
Maybe you are looking for
-
After downloading mavericks, mail won't open at all.
I downloaded the latest mavericks software today, and now mail will not open at all. Any suggestions?
-
Battery not charging, related Firewire problem?
Hi all! Hope your machines are doing well. ^_^ The battery in my 366 Indigo Clamshell (FW) suddenly stopped charging. The battery is about 4 months old. Original Apple battery, sealed when I bought it. I've tried the following: - PMU Reset - Deep cle
-
New database link gets long name with domain name
When I create a database link with a name "X", oracle renames it to X.regress.rdbms.dev.us.oracle.com Why?
-
Auto Suggest with multiple fields?
Hello, I am planning on using the autosuggest on a project I'm working on, and was surprised by the lack of support for multiple fields. Correct me if I'm wrong, but right now you can only search for the 'name' field or 'age' etc. I would like to be
-
My battery isn't even lasting an hour on a full charge after upgrading to Mountain Lion!!!
Upgraded last week and now when I take my MacBook Pro (Early 2010) off of charge it won't even last an hour. This is a joke!