Encfs filename decoding error (mounting works, mountpoint is empty)

Hi!
a fairly large (1.9 GB) encfs-encrypted directory of mine stopped working some time ago, and I am hoping someone here can help me regain access to the data.
This is the situation:
– The directory can still be mounted, but the mount directory appears empty.
– The encrypted data seems to be intact: There is a ".encfs6.xml" and a hierarchy of gibberish-named files and folders, which amount to 1.9 GB altogether.
– I can still write to the directory. (I. e. if I mount the dir, create file with "touch <file>", unmount, and remount again, the newly created file is still there.)
– When I run encfs with the "-vf" options, I see these error messages:
20:42:00 (DirNode.cpp:132) error decoding filename: be1k7L8fVkv63EsbHLLxoJtY
20:42:00 (DirNode.cpp:132) error decoding filename: .encfs6.xml
– When I do "ls" on the dir, the command works, while "encfs -vf" says:
20:57:09 (encfs.cpp:92) getxattr /home/carlos/mnt/ssh/morrigan/home/carlos/gemein/encfs/eZAORCDpP7ZyvSscCPZLuUwI
20:57:09 (encfs.cpp:99) getxattr error: Operation not supported
The full output of "encfs -vf" is quoted below. You may notice the the encrypted data is accessed through an sshfs mount. This is not the present source of the problem, as I can reproduce it directly on the server. It may, however, be its origin: The data could have been corrupted by a network interruption (or so I imagine).
There is a similar problem report on askubuntu. It is even from around the same time when it hit me (roughly two months ago):
http://askubuntu.com/questions/360847/e … g-the-data
Also, there apparently was a bug in the boost libraries in 2010 which produced similar errors (among others), but which does not seem to be connected in any way:
https://bbs.archlinux.org/viewtopic.php?id=92209
Any ideas?
$ encfs -vf /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/ /home/carlos/.gemein/encfs/
21:03:07 (main.cpp:523) Root directory: /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:03:07 (main.cpp:524) Fuse arguments: (fg) (threaded) (keyCheck) encfs /home/carlos/.gemein/encfs/ -f -s -o use_ino -o default_permissions
21:03:07 (FileUtils.cpp:177) version = 20
21:03:07 (FileUtils.cpp:181) found new serialization format
21:03:07 (FileUtils.cpp:199) subVersion = 20100713
21:03:07 (Interface.cpp:165) checking if ssl/aes(3:0:2) implements ssl/aes(3:0:0)
21:03:07 (SSL_Cipher.cpp:370) allocated cipher ssl/aes, keySize 24, ivlength 16
21:03:07 (Interface.cpp:165) checking if ssl/aes(3:0:2) implements ssl/aes(3:0:0)
21:03:07 (SSL_Cipher.cpp:370) allocated cipher ssl/aes, keySize 24, ivlength 16
21:03:07 (FileUtils.cpp:1620) useStdin: 0
EncFS Password:
21:03:20 (Interface.cpp:165) checking if ssl/aes(3:0:2) implements ssl/aes(3:0:0)
21:03:20 (SSL_Cipher.cpp:370) allocated cipher ssl/aes, keySize 24, ivlength 16
21:03:21 (FileUtils.cpp:1628) cipher key size = 44
21:03:21 (Interface.cpp:165) checking if nameio/block(3:0:1) implements nameio/block(3:0:0)
21:03:28 (DirNode.cpp:770) created FileNode for /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:03:28 (encfs.cpp:134) getattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:03:39 (DirNode.cpp:770) created FileNode for /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:03:39 (encfs.cpp:134) getattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:40 (DirNode.cpp:770) created FileNode for /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:40 (encfs.cpp:134) getattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:40 (DirNode.cpp:770) created FileNode for /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:40 (encfs.cpp:134) getattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:41 (encfs.cpp:213) getdir on /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:41 (BlockNameIO.cpp:185) padding, _bx, finalSize = 139, 16, -123
21:06:41 (DirNode.cpp:132) error decoding filename: be1k7L8fVkv63EsbHLLxoJtY
21:06:41 (DirNode.cpp:132) error decoding filename: .encfs6.xml
21:06:41 (DirNode.cpp:770) created FileNode for /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:41 (encfs.cpp:134) getattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/
21:06:41 (DirNode.cpp:770) created FileNode for /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/eZAORCDpP7ZyvSscCPZLuUwI
21:06:41 (encfs.cpp:134) getattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/eZAORCDpP7ZyvSscCPZLuUwI
21:06:41 (encfs.cpp:92) getxattr /home/carlos/mnt/ssh/server/home/carlos/gemein/encfs/eZAORCDpP7ZyvSscCPZLuUwI
21:06:41 (encfs.cpp:99) getxattr error: Operation not supported
Edit: I have by now resigned myself to the fact that the file .encfs6.xml must have been corrupted somehow, which means that the data are unrecoverably lost. Lesson learned: Backups are extra-important for encrypted data!
Last edited by Franek (2014-03-03 21:14:16)

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Similar Messages

After Effects Alert when opening (Error: Mount Point list is empty)

I am so confused right now. I have searched everywhere for a solution to no avail. I have a brand new Mac Pro 2.7 Ghz 12-core intel Xeon e5 with 32 gigs of ram. I installed Reelsmart's Motion blur and when I tried to re-open After Effects I got an After Efects Alert that reads.
Last log message was: <140735179719440> <EAMountPoints> <0> Error: mount point list is empty
Generating crash log, which may take a few minutes.
Can anyone help please! I'm on a tight deadline and I'm grounded.
Thank you, thank you!!

What exact version of AE (down to the last decimal point)?

[SOLVED] Error mounting an ISO file located in an EncFS folder

I have some multimedia files inside an EncFS folder (decrypted via cryptkeeper).
When trying to loop mount the ISO files I get:
mount: foo.iso: failed to setup loop device: Permission denied
There's no error mounting the same ISO from a «regular» FS.
Is there a way around this?
Last edited by JoaoVidal (2014-02-24 06:36:42)

unSpawn at linuxquestions.org answered:
See 'man encfs': the warning at "--public" and 'man fuse': "allow_other"
Without setting the option 'public' in encfs or 'allow_other' is fuse, not even root can access the encfs mount and therefore mounting fails (sudo mount...).
Also, cryptkeeper now has the preference "Allow other users to access mounted folders" which gives exactly this kind of permission.

[SOLVED] netfs fails to mount samba mountpoint in fstab

Answer: netfs fails to mount my samba mountpoint because eventhough
network is before netfs, and network is not started in the background, it
still seems to take a while to complete, but it doesn't block netfs from running.
If I put some stalling code in /etc/rc.d/network, and make it wait, then netfs
will mount the shares, because network was allowed to start and netfs can
it can find the servers.
Now, what I want to know is why my network starts up so slowly.
----------------------- Read thread for details ----------------------
This similar setup is working on my old Gentoo setup.
fstab
//tib/public /mnt/network/tib smbfs rw,user,auto,guest 0 0
tib resolves to a server on my LAN.
When I boot my ARCH system, it gets to netfs daemon, and times out trying to
access the server. I get the message
5711: Connection to tib failed
SMB connection failed
The boot completes, and I log in and get the following
$ ping tib
PING tiburon.mill (192.168.0.36) 56(84) bytes of data.
64 bytes from tiburon.mill (192.168.0.36): icmp_seq=1 ttl=64 time=0.354 ms
64 bytes from tiburon.mill (192.168.0.36): icmp_seq=2 ttl=64 time=0.371 ms
and, I can mount it like this (which reads /etc/fstab)
$ mount //tib/public
$ ls /mnt/network/tib/ | wc -l
11
It seems like ARCH isn't able to use the network until sometime after this point in the boot. Here's my rc.conf daemons
DAEMONS=(syslog-ng network netfs crond sshd alsa)
I tried putting netfs last, but that made no difference. I also tried to load netfs in the background without benefit.
Note: cifs doesn't work either; and I get more descriptive errors
:: Mounting Network Filesystems
mount error: count not find target server. TCP name tib/public not found
No ip address specified and hostname not found.
OK, that clear enough. But, the hostname is found right when the boot process finishes and I get a prompt.
And, I've tried the ip address, and FQDN too.
Any ideas?
Last edited by ristretto (2007-07-24 05:04:57)

ok, gave it a try.
//tib/public /mnt/network/tib cifs rw,user,noauto,guest 0 0
$ cat /etc/rc.d/local
#!/bin/bash
mount //tib/public
$ grep DAE /etc/rc.conf
# DAEMONS
DAEMONS=(syslog-ng network netfs crond sshd alsa local)
Note local at the end.
Now, all the daemons load up quick, and then local goes and times out, and I
get the same error.
mount error: count not find target server. TCP name tib/public not found
No ip address specified and hostname not found.
putting mount in .bash_profile is a bit of a security issue (though not really on my setup)
but, more importantly, it mounts each time I log in to that account (say each ssh window to the box.)
I'm thinking it's a bug in the initialization process somewhere? I've never had this problem on other distros.
What thinks you?

Project View does not show the Path and Filename when errors occur

I have the problem, that errors occur in the project but in the colum that shows the "Resource" I can only see the "Project Name". Normally it should show the filename. The "Path Column" is completely empty. The "Location column" shows the correct line number in the file (but unfortunately I have no Idea which file). Double clicking on the row does not do anything.
I'm sure it had worked, but no idea since when this problem occurs. I am using Flash Builder 4.7.

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Red frames and MXF decode error

Hi there,
I have Premiere Pro CC and running Mac OSX 10.9.5. I have one long 32 minute long C300 MXF clip in my timeline which seems to be fine until around the 26 minute mark, where the entire frame goes red. The audio still works, but I can't see anything. I have tried to convert the clip to ProRes in Media Encoder also, but the same issue happens.
In the report log from Media Encoder I get the following message repeated many times:
MXF decode error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 47650. Frame 47618 was substituted.
And then occasionally it says:
MXF read error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 239.
Any advice about this??
Thanks,
Simon

Hi there,
I have Premiere Pro CC and running Mac OSX 10.9.5. I have one long 32 minute long C300 MXF clip in my timeline which seems to be fine until around the 26 minute mark, where the entire frame goes red. The audio still works, but I can't see anything. I have tried to convert the clip to ProRes in Media Encoder also, but the same issue happens.
In the report log from Media Encoder I get the following message repeated many times:
MXF decode error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 47650. Frame 47618 was substituted.
And then occasionally it says:
MXF read error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 239.
Any advice about this??
Thanks,
Simon

Sender file adapter - filename containing * does not work

Hi All,
I am doing simple file-file scenario wherein my filename is something like
MATMAS05_XI20070911-150159-088.xml
there are many files having similar kind of name which are supposed to be picked
so simply I can go on writing <b>MATMAS05_XI*.xml</b> in filename
it is not working.. communication monitoring gives error <i>Error occurred while connecting to the FTP server "10.25.117.237:21": java.lang.NullPointerException</i>
But when I use character '?' then it works fine - '?' placeholder for each extra character
I am on SP 20.My adapter is configured properly. FTP server working fine with '?' or simple filename. So bit confused why it is not working with *
Are there some BASIS settings which have to be in place to work it out with * ?
All your inputs are welcome !!
Thank You,
Mugdha kulkarni

Hi
this error is not related to multimple files or sending with the * char.. you can use it
see the below link
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
The error related to the server connection.. also check the ip address is correct or not you configured correctly or not..
also clarfity the correct error description ..
Chilla

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Decode error when outputting to file to later burn to DVD

I have an MPG file created in Ulead Media Studio Pro (which I can no longer run as it does not run on Windows 7 which my new PC uses). I created a new project in PE9, added the mpg file, dragged it to the timeline and told Premiere to change the project settings to match. It is now PAL DVD Upper field first. There is no red line on the timeline above the clip. When I try to output it to a file for later burning to DVD I get a decode error around a particular frame. When I go near that frame in the monitor window and step forward one frame at a time it moves smoothly until it gets to the frame in question when there is a noticeable delay from pressing the arrow button and the time counter updating to the next frame number. The MPG plays fine in Windows Media Player and VLC player - it shows a cross fade transition at the spot that fails in PE9. Is there anything I can do to fix this? I don't have independent DVD authoring software as otherwise that would be an option.

Depending on the source footage, I have found that some other programs do a better job of handling them. For that reason, I have CyberLink PowerDirector, and Magix MovieEdit Pro on my computer. Actually, since I use PrPro for most of my work, that is also why I bought and installed PrE - it handles footage well, that PrPro chokes on.
Personally, I am less comfortable actually editing in PowerDirector, or MovieEdit Pro (older versions of both), but PrE is closer to PrPro, so I rely on it as my "first step," and the other two NLE's more as just converters.
Still, if another tool in your video-editing toolbox, works better, there is zero shame in using it. Sometimes an adjustable spanner is all a mechanic needs, but when they require a universal socket with a "wobbly" extension on their Snap-On rachet, then the adjustable spanner goes back into the toolbox.
Most of all, I am glad that you are able to produce the desired results. That is what it's all about.
Thanks for reporting your workflow and your success. Good luck.
Hunt

Decode Error in Cisco VCS for a call from Jabber to telyHD

Hi,
We have the following setup:
Cisco Jabber <---> Cisco VCS <---> telyHD (Our Video Product)
Now, the call works well when the call is intiated from telyHD to Cisco Jabber.
But, the call fails when the Cisco Jabber initiates the call towards telyHD.
The packet capture on VCS shows that there is a syslog message from VCS to Jabber indicating the following when 180 Ringing is received from telyHD:
Message [truncated]: tvcs: Event="Decode Error" Service="SIP" Src-ip="10.1.1.19" Src-port="5060" Dst-ip="10.1.11.11" Dst-port="25331" Detail="(User-Agent) Single header User-Agent appeared twice in message" Protocol="TCP" Level="1" UTCTime
Can you please help in troubleshooting this issue. I don't see multiple "User-Agent" headers in the 180 Ringing sent by telyHD.
I have attached the packet capture on VCS.

I am also having the same issue. Can someone please respond? Thanks.

AIP-51504: General Decode Error

Hi,
We are facing the below error while processing 997's for a partner. This error is inconsistent. 997 setup works sometimes and it doesn't at times.
Did any one else faced this situation?
Thanks,
Description: Unable to decode the message
StackTrace:
Error -: AIP-51504: General Decode Error: Error -: AIP-11015: Object does not exist 4C1D1D4ADAB8FCF6E040710A1F4C5E93-35-1
     at oracle.tip.adapter.b2b.msgproc.FunctionalAck.processIncomingMessage(FunctionalAck.java:669)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1778)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
     at java.lang.Thread.run(Thread.java:534)
Caused by: Error -: AIP-11015: Object does not exist 4C1D1D4ADAB8FCF6E040710A1F4C5E93-35-1
     at oracle.tip.repos.core.driver.InternalObject.getAssociation(InternalObject.java:690)
     at oracle.tip.repos.core.persistency.BaseObject.getAssociation(BaseObject.java:388)
     at oracle.tip.model.b2b.instance.BusinessMessageReceiverInter.getReceiver(BusinessMessageReceiverInter.java:186)
     at oracle.tip.adapter.b2b.msgproc.AccessRepo.findRequestBusinessMessageByControlNumber(AccessRepo.java:665)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.getRequestB2BMsgIdByControlNumber(DbAccess.java:3066)
     at oracle.tip.adapter.b2b.msgproc.FunctionalAck.processIncomingMessage(FunctionalAck.java:588)
     ... 7 more
Edited by: user4540631 on Oct 15, 2008 10:50 AM

Hi,
More information:
1) Only inbound FA's are failing (please note its random)
2) The number in AK102 matches to our outbound invoice's GS number, so i guess the correlation is fine.
3) I just reprocessed the FA after modifying AK102 number in FA to the ISA number of the invoice, with all preceding zero's and this works.
Example for my below outbound invoice, i have pasted below the FA that is failing and the modified FA which working.
Kindly advise
My Outbound Invoice
ISA*00* *00* *01*MY ID *01*MY PARTNER'S ID *081014*1012*U*00401*000001646*0*P*>'
GS*IN*MY ID*MY PARTNER'S ID*20081014*1012*1646*X*004010'
ST*810*1646'
BIG*20081016*123456*20081014*PO-NUMBER-A***DI'
CUR*SE*USD'
REF*VN*9001256'
N1*BT*TECH DATA CORP*93*TEMP000889-11350383-GP'
N3*5350 TECH DATA DRIVE'
N4*CLEARWATER*FL*33760*US'
N1*RE*REMIT TO.'
N3*REMIT TO.'
N4*PALATINE*IL*60055*US'
N1*ST*CSC SCORE DIVISION*93*4922495'
N3*PURCHASING DEPT, BLD#1479*NAS NORTH ISLAND,'
N4*SAN DIEGO*CA*92135*US'
DTM*011*20081016'
IT1*1*2*EA*151.2**VP*ABCDEF*BP*04989J'
PID*F****PRODUCT ABCDEF'
TDS*30240'
CAD*****UPS'
CTT*1'
SE*23*1646'
GE*1*1646'
IEA*1*000001646'
Modified FA, which is not failing
ISA*00* *00* *01*MY PARTNER'S ID *01*MY id *081015*1341*U*00401*200000541*0*P*|~
GS*FA*MY PARTNER'S ID*MY ID*20081015*1341*200000541*X*004010~
ST*997*0661~
AK1*IN*000001646~ -->Please note, modified AK102 with ISA13
AK9*A*1*1*1~
SE*4*0661~
GE*1*200000541~
IEA*1*200000541~
Original FA which is erroring out
ISA*00* *00* *01*MY PARTNER'S ID *01*MY ID *081015*1341*U*00401*200000541*0*P*|~
GS*FA*MY PARTNER'S ID*MY ID*20081015*1341*200000541*X*004010~
ST*997*0661~
AK1*IN*1646~ --> note AK102 is matching the invoice's GS number
AK9*A*1*1*1~
SE*4*0661~
GE*1*200000541~
IEA*1*200000541~

Virtual Box error: error mounting /dev/sda1 on /mnt

Hello folks,
After getting fed up with Ubuntu's bloated setup, I was trying to switch to Arch linux. But before that I wanted to try it in Virtual Box. I was using Arch Linux Core image for this. But after setting up file system and mountpoint I am getting this error:
error mounting /dev/sda1 on /mnt
The steps I followed:
1. Source: Core local
2. Editor: Nano
3. Clock: As usual
4. Prepare hard drive:
a) Manually Partition (as this is what I will be doing during actual installation)
b) /dev/sda
c) New partition on all space available on virtual machine, making it primary, bootable, Type: Linux Extended (option 85).
d) Write partition and Quit and Done
5. Manually configure block device, filesystems and mountpoints.
a) dev
b) Do not recreate file system.
c) Set ext4 format and mount point, ignoring swap space or seperate /boot partition.
d) Now when I goto next step as Done, It gives an error : Error mounting /dev/sda1 on /mnt/.
Is there any problem with creating the filesystem as I have done? Can anyone shed some light if there is any particular configuration needed for virtual machine. I searched the forum for other options. But none of them seem applicable for me.
Thank you for your time.

What host os and CPU are you using? The message states that you need virtualization hardware support in the CPU (Intel VT-x or AMD-V) in order to run that 64 bit guets OS. Reasons for this error (that I could think of) could be:
- you have a very old cpu
- you have disabled virtualization in your bios
- you are running a 32-bit host os
These links to the docs may also help
https://www.virtualbox.org/manual/ch10.html#hwvirt
https://www.virtualbox.org/manual/ch03.html#intro-64bitguests
cheers
bjoern

[SOLVED]Error mounting: mount exited with exit code 16

hi guys, i have a dual OS. today after i force shutdown my computer, i can't mount one of the ntfs 。it shows the follow errors:
Error mounting: mount exited with exit code 16: Mount is denied because the NTFS volume is already exclusively opened.
The volume may be already mounted, or another software may use it which
could be identified for example by the help of the 'fuser' command.
any idea?
Last edited by wntyygtwxf (2011-12-01 11:09:27)

i resolve it by myself.
first, i mount it at another place, just like sudo mount /dev/sda? ~/home/down
then umount it.
now it work well. but i don't know why this worked.

MXF decode errors and red frames in exports

Ever since upgrading to Premiere Pro release 2014.2 (8.2.0 (65) Build) we've been having problems with random red frames appearing in our exports. These errors are always associated with our Sony PMW-200 media files (.mxf files.) Red frames during editing happen very rarely, but are usually present in our exports. For short form work re-exporting the sequence will work sometimes, but may cause red frames to appear elsewhere... For long form work we've adopted a very lengthy work-around to fix the errors after exporting.
Phone support recommended deleting the media cache files, but we've tried that and the problem still exists. This problem is happening with new media that has been imported since the upgrade as well as old media that we imported before the upgrade. We're editing with many mixed media files all in their native codec and the only media files that get flagged with decode errors are the .mxf files.
We edit a large volume of work daily and this problem is a huge setback in our confidence with our exports as well as Adobe products.
For the record were editing with Mac Pros that are about a 3-5 years old with OS X 10.8.5 and an Xsan shared storage system. We have a Cloud for Teams subscription and all our software is updated frequently.
Any thoughts would be helpful. Personally I would love to escalate this problem to a higher level support team.
Regards,
Eric

I have the same problem running Adobe CC on high-end PCs. - My business is smalish, but this leads to having a rather big impact on my confidence.
MXF-files from Canon C300 and Sony FS7 platforms.
- With FS7 footage I've had the frames appear throughout a clip with perfect distance (16 frames apart) - when applying Denoiser 2 from Red Giant. - The plugin simply stopped the frames from appearing on a random basis.
- I've also experienced that when the error was present, dissolves became cuts.
- I've tried to isolate software/hardware rendering, but it does not seem to change anything to select one over the other.
I try work around it by rendering uncompressed sections of the timeline and replace it where it works, and then try again and again. - Very time-consuming and cumbersome.
Best
Torsten
Denmark

PDF decoding error then data exceeds 99 pages

Dear all,
i'm facing a PDF decoding error when as an atachment in a Email.
I figure that PDF attachment is opening when it HAS less the 100 pages but can not open
below is the error message when open ADOBE, this happens only when pages are more than 99.
"Adobe Reader could not open 'NAME.PDF' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded) "
can anyone help me please.

For checking this
First download using fm GUI_DOWNLOAD as bin (PDF) download to you desktop and open it. if its working then you may need to check settings in SCOT.
a®

Encfs filename decoding error (mounting works, mountpoint is empty)

Similar Messages

Maybe you are looking for