Enforce default crosstab options for all users ?

Is there any way to set the default style to either inline or outline for crosstab for all Discoverer desktop clients (NOT Plus or Viewer)or does this have to be set individually by each user through his/her Options ?

Hi Susan
I'm afraid you have to do this on each machine, however one can get smart and force the system to rest to a chosen style each time the user launches desktop.
You need to intercept the shortcut to the Discoverer Desktop executable and send it to a batch file instead. In the batch file you would have commands like this:
@echo off
call regedit /s c:\reset.reg
call c:\oracle\9ids\discoverer902\bin\dis51usr.exe
exit
The file reset.reg would be created using a normal text editor such as Notepad and would contain lines like this:
For an inline view:
REGEDIT4
[HKEY_CURRENT_USER\Software\ORACLE\Discoverer 902\Crosstab]
"Axis Style"=dword:2
For an outline view:
REGEDIT4
[HKEY_CURRENT_USER\Software\ORACLE\Discoverer 902\Crosstab]
"Axis Style"=dword:1
Note: the command REGEDIT4 should be on the first line, then a blank line, then the line containing the command to set the Axis Style, and finally there should be one extra blank line. In the call to the registry editor the switch /s tells it to use a silent install. Remove this switch the system will prompt the user that the registry is about to be updated.
Hope this helps
Regards
Michael

Similar Messages

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

Changing the default keyboard language for all users via command line

I have about 250 computers, that I set the wrong default language on.
I am hoping someone here can help me. I have 3 keyboard languages installed in my labs,
En-English (United States)
Fr-French (Canada)
En-English (Canada)
I'd like to make the Fr-French (Canada) the default keyboard language for all users that login I have tried the following xml but it's not working. I do not see the problem any help would be appreciated.
I tried to run it by doing this
control intl.cpl,, /f:"FR-DefaultKeyboard.xml"
The following code below is called FR-DefaultKeyboard.xml file.
<gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">

<gs:UserList>
<gs:User UserID="Current"/>
</gs:UserList>

<gs:UserLocale>
<gs:Locale Name="FR-CA" SetAsCurrent="true"/>
</gs:UserLocale>
</gs:GlobalizationServices>

<gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">
<gs:UserList>
<gs:User UserID="Current" CopySettingsToDefaultUserAcct="true" CopySettingsToSystemAcct="true"/>
</gs:UserList>
<gs:InputPreferences>

<gs:InputLanguageID Action="add" ID="0409:00000409" Default="false"/>

<gs:InputLanguageID Action="add" ID="0c0c:00000c0c" Default="true"/>

<gs:InputLanguageID Action="add" ID="1009:00001009" Default="false"/>
</gs:InputPreferences>
</gs:GlobalizationServices>
This worked, thank you

Setting default printing presets for all users, esp. guest user

i want to set black/white, two sided printing as the default for all users (9 macs, 30 users on each).
i set up and save this preset as admin, and copy the files
com.apple.print.custompresets.plist
com.apple.print.custompresets.forprinter.nameofprinter.plist
from admin home/library/preferences to the other users preferences-folders.
but logging on to any of the other users, i still dont even get the new preset listed.
i tried entering cups, but there, only the printer setup is editable.
especially i would like to set the custom preset as default for the guest account, without being wiped every log off.
is there any alternative way to do this? i dont want to manually log in to the 300 accounts to change this.

You can do that for new users via a file user.js in the default template folder for new profiles.
C:\Program Files\Mozilla Firefox\defaults\profile\
*http://kb.mozillazine.org/user.js_file

IH01 default screen variant for all users

Hi,
I want location hierarchy, equipment installed and BOM explosion checked in the transaction IH01 for all users. I can do this through a screen variant but the user will have to choose it every time he enters this transaction. Is there a way that the above fields default as checked everything a user enters the t-code? I looked for it in SPRO and could not find it. Any help would be greatly appreciated. Thanks
Ajay

hi
if the variant you have created is the only one available then it will display to all the user,but the if some other variant is there with user name then it will be displayed for the user logged on .
only thing is don't authorize the user to create the variant
from SAP help:
Each user can also create their own selection screen. The selection screen defined by you is only then proposed by the system, if no individual selection screen has been defined for the user under their user name.
If you want to define an individual selection screen for each user, and the user-specific selection screen should be proposed automatically when the report is called up, the name of the report variant must begin with U_USERNAME.
Maintenance of selection variants
When you execute the function, you reach the initial screen with all the selection fields. There you can define the standard selection screen. This selection screen is then always proposed if no individual selection screen has been defined for the user under the name U_USERNAME.
regards
thyagarajan

Urgent!! Default query template for all users.

Hi Guys,
How do I set the default template for queries for all users.
I saved the default template and did the setting settings>query on embed>use the default template. So the template eorked for me.
But when a different usre tried, the template did not load for him.
So is there a specific setting that can be done so that it apllies for all users.
Thanks
simmi

Hi Simmi,
There is a way that you can do this. Check this post for details as provided by Prakash:
Re: Permanent BW Excel Template
Hope this helps...

How to set toolbar options for all users in Reader

Hi to everybody
I have istalled adobe acrobat reader on a PC and i'd like to hide the toolbar for all user (old and new users) of thes PC.
I'm using windows xp and acrobat reader 7.
I have try to chek the user's folder and system registry but i don't find anything usefull
How can I do that?
Thanks
Andrea

Hi to everybody
I have istalled adobe acrobat reader on a PC and i'd like to hide the toolbar for all user (old and new users) of thes PC.
I'm using windows xp and acrobat reader 7.
I have try to chek the user's folder and system registry but i don't find anything usefull
How can I do that?
Thanks
Andrea

How can I set default toolbar layout for all users in my system?

Hi everybody! I am running a local ubuntu server at my office. I can set some defaults preferences (about:config) for all new users in the system by defining those prefs in the /etc/firefox/syspref.js.
Now, I want to define default toolbar layout in a similar way (maybe not needed but fun), to copy the toolbar layout for my user. Is there a general way to do that?
thank you in advance!

You can try to create a default template folder (defaults/profile) in the Firefox and place the file(s) in that folder for newly created profile.
The only way to customize an existing profile is to copy files directly to it.

How do I set the default audio output for all users

Here's the story. I have a Mac Pro in a classroom that is connected to the audio system via the digital (Toslink) output. The systems are bound to AD and OD with some minor management being performed via MCX (printers, login, etc...)
When a new user authenticates to the system the output defaults to the internal speakers not the Digital Out.
My assumption was that I could configure default 0 key in the com.apple.audio.SystemSettings.plist to AppleHDAEngineOutput:1B,0,1,4:2, which is the digital output.
However it seems that new users are still generated with the Internal Speakers which is AppleHDAEngineOutput:1B,0,1,2:0.
Is there somewhere else that I can configure that default such that all users will default to the Digital Out, AppleHDAEngineOutput:1B,0,1,4:2? Or am I perhaps not configuring the SystemSettings plist correctly?
Most of these tasks were previously taken care of by another technician but he has left and I'm quickly trying to pickup the slack for configuration of our Macintosh environment.
Thanks,
-alex-

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

My default font size is set at 18px. Is this the default default font size for all users of ff 3.6+?

I was developing a site in ff when I noticed other browsers were rendering the font size smaller than in firefox. Upon investigation I discovered that my ff 3.6 default font was Adobe Caslon Pro Bold 18px.
I have never deliberately set this. My understanding was that all browsers default default font size was 16px.
Has ff default font size changed from 16px to 18px?

You're welcome.
You can also see preferences that have changed as bold (user set) values on the about:config page.<br />
See http://kb.mozillazine.org/about%3Aconfig

How can I set a default view option for all finder windows in Lion?

I am talking about the icon size and grid spacing.

Open up a Finder window, CMD+J, set it up as desired, and click on Use as Defaults. Do note that will only apply to windows that you've not opened before. If you want to apply that to all previously opened windows, you need to remove all the .DS_Store files which store that data for each previously opened folder. To do that, launch the Terminal app (in /Applications/Utilities/), copy & paste this command into the window that pops up, and hit the return key:
sudo find / -name ".DS_Store" -exec rm {} \;
At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key. When the default prompt, usually the $ sign, pops up, quit the Terminal app, restart, and open a Finder window, set it up the way you want, and click on Use as Defaults. All subsequently opened or created folders should retain that view.

Edit defaults mode , Preferences for all users.

Hi,
Iam working on an portlet app as part of it am planning to make the portlet application as jsr 168 compliant.
I have few questions regarding the jsr 168 stuff.
a) what versions of Bea portal do support the jsr 168 portlets it is it available for download todo some investigation.
b) This is an question related to preferences - For example Suppose user "A" publshes the portlet and another logged in user views the portlet he should see the same set of preferences or the defaults set by the user "A" . Some portals like Oracle portal achieve this by supporting a mode called Edit Defaults mode. How do i achieve this in a Portal which doesn't support edit defaults but it is JSR compliant. In other words the prefences set by the user "A" should be available to user "B" , how does i achieve this functionality in other portals. Note Edit defaults mode is an custom mode supported by the JSR 168 API it is not a mandatory mode like the Edit, View or Help .
Thanks in Advance.
Mouli

Resending as i havent received any replies. Thanks
Hi,
Iam working on an portlet app as part of it am planning to make the portlet application as jsr 168 compliant.
I have few questions regarding the jsr 168 stuff.
a) what versions of Bea portal do support the jsr 168 portlets it is it available for download todo some investigation.
b) This is an question related to preferences - For example Suppose user "A" publshes the portlet and another logged in user views the portlet he should see the same set of preferences or the defaults set by the user "A" . Some portals like Oracle portal achieve this by supporting a mode called Edit Defaults mode. How do i achieve this in a Portal which doesn't support edit defaults but it is JSR compliant. In other words the prefences set by the user "A" should be available to user "B" , how does i achieve this functionality in other portals. Note Edit defaults mode is an custom mode supported by the JSR 168 API it is not a mandatory mode like the Edit, View or Help .
Thanks in Advance.
Mouli

Default WorkBook file extension for all users of BEx 7 in Offce 2007

Hi Experts
We recently started using office 2007 with BEx 7.
However, many users still has Office 2003 installed.
I am looking to set the default file extension for all users to be .XLS.
I know that this option is available in Client level (Global Settings - Use XLS file format ) but I require that the checkbox will be automatically checked.
Is there a way to do it?
Thanks,
Yaniv

Hello Yaniv,
Yes, you can maintan them globally.
this can be done in registry under :   HKEY_CURRENT_USER\Software\SAP\BEx\Analyzer.
   UseXLSFileFormat
   Type: String Value
   Value true or false
For more information refer to SAP Note 1254112
Regards,
Arvind

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

Finder View Options, For All Sub Folders

If I understand how View Options work in Finder windows ...
I can set View Options for a particular folder to always open up in a particular View Options setting.
I can set that very same View Option as the Default View Option for all the rest of the folders I open up.
But, what I would like to do is set the View Options for a folder and all it's sub folders to be the same. Without changing the default View Option for the rest of the folder I open up.
For example.
I like to have my Documents open up in List View.
I like to have my Photos open up in Icon View. (along with certain Icon View Option settings)
Is there a way to do this?
Can I set the directory and all sub folders/directories for all my photos to open up the way I would like them? Without having to change the way all my Document folders/directories open up?
Because the way it seems to work now, is that every time I create a new folder in my Photos directory/folder, I have to manually set the View Options, since the default is List View and not Icon view. If I change the default to Icon View, then any new folder/directory in my Documents will then open up in Icon View.

If the folder is not set to open in a specific view, it should open in the same view as the containing folder. When using mixed views, you need to open the folder in another window to get the view it previously had.
In your example, setting Documents to always open in list view and Photos to always open in Icon view should have any new sub folders open in the same view. If any existing sub folders have a different view, you will need to manually change the view, since the Finder will (usually) keep track of the view any particular folder has.

Enforce default crosstab options for all users ?

Similar Messages

Maybe you are looking for