Enhance LIS_ extractor with delta load

Hi all,
I need to enhance 2LIS_02_ITM or 2LIS_02_SCL with account assignment (EKKN). How should I handle the delta from account assignment? It is in 460 environment. I'd like to have similar extractor as 2LIS_02_ACC which exists in 700.
How should I approach? Which way is better?
Options one: Create a generic extractor, delta base on AEDAT in EKKN table. Create custom ODS....
Option two: enhance current 2LIS02_ITM or 2LIS_02_SCL, add cufs. But how to handle the delta?
Thanks
J.

Hi J CHEN
In my opinion first check with MM -Purchasing consultant whether the delta in account assignment is linked to purchasing document changes or not ? (check whether delta is supported or not ...you can do this testing in SAP R/3 Side) and if answer is YES then you should go for Option 2 which is relatively simpler.
hope this helps
Regards
Pradip
(Friends: Don't forget to assign points !!)

Similar Messages

Enabling FI-SL extractor with delta capability

I am working on enabling FI-SL (3FI_SL_*) extractor with delta capability.
Implemented OSS note 328197 successfully and also related OSS notes.
This works on totals table. Source system is 4.6C
Tested BW01, BW03 and everything seems to be fine, and shows as if extractor is enabled for delta loads.
I have done initialization. it works fine and got records.
But when I do delta - it shows ZERO records.
In RSA7 also I see Zero records.
If you have any experience , will you please share with me.
It's a very urgent one.
Venu

Create some records in the source system so that the base tables for this extractor will add some records.
Then check rsa7 whether it shows any records for next delta.
As Hari said..there might not be fresh records created or records changed,if you do delta load immediately after an init load.
cheers,
Vishvesh

Issue with delta load from R/3 to BW

Hi frnds,
There is a standarded D.S 2LIS_05_ITEM in R/3. Evereday We extraceted data from R/3 to BW based on this standard Data Source with delta load.There are two fields ZX and ZY in BW ,some times the data haven't extracted for this 2 fields in BW with the delta update.But some times this 2 fields properly extracted in to BW with the same delta update.
Why is it happen like this ? Please give some inputs on this.
Regards,
Satya.

Hello,
if its a standard field then its getting populated in correct way.
if its custom field then you need to analyze the records for which its getting populated and for one which its not.
Quite possible that some cutomization in CMOD results in this behaviour.
Also,check underlying tables to see the correct values.
Regards
Ajeet

Problem with delta load urgent!!

Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank you

Hi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh

Issue with Delta Load in BI 7.0... Need resolution

Hi
I am having difficulty in Delta load which uses a Generic Extractor. The generic extractor is based on a view of two Tables. I use the system date to perform the delta load. If the system date increaes by a day, the load is expected to pick up the extra records. One of the tables used in the view for master data does not have the system date in it.
the data does not even come up to PSA. It keeps saying there are no records.... Is it because I loaded the data for yesterday and manually adding today's data...?
Not sure what is the cuase of delta failing....
Appreciate any suggestions to take care of the issue.
Thanks.... SMaa

Hi
The Generic DataSource supports following delta types:
1. Calender day
2. Numeric Pointer
3. Time stamp
Calday u2013 it is based on a calday, we can run delta only once per day that to at the end of the clock to minimize the missing of delta records.
Numeric pointer u2013 This type of delta is suitable only when we are extracting data from a table which supports only creation of new records / change of existing records.
It supports
Additive Delta: With delta type additive delta, the record to be loaded only returns the respective changes to key figures for key figures that can be aggregated. The extracted data is added in BI (Targets: DSO and InfoCube)
New status for changed records: With delta type new status for changed records, each of the records to be
loaded returns the new status for all key figures and characteristics. The values in BI are overwritten (Targets: DSO and Master Data)
Time stamp u2013 Using timestamp we can run delta multiple times per day but we need to use the safety lower limit and safety upper limit with minimum of 5 minutes.
As you specified, the DS is based on VIEW (of two tables, with one containing date and other does not).
Kindly check the above lines and verify, if the view (primary key) could be used to determine the Delta for your DS.
Also let us the if any standard SAP tables used in creating VIEW and if so, what is the size of the DS load every day?
Thanks.
Nazeer

Master data is getting overwrite with delta load

Hi,
We have an issue like some some asset numbers are showing blank for wbs elemnts.So we did Full repair Request.So pblm is solved.But after daily delta loads it is getting over write and again asset numbers are blank..please let me know any suggestions?
Regards,
Baanu

Ok, so your problem in the source-system itself. Since the update mode for master data is overwrite, when these records with blank fields are loaded they will replace the existing values and you will have blank values in your master data.
Check whether the data is available in the tables in the Source-system. If you have made any enhancements to the DataSource using exits, check the code for the exit and try to find out if the data is being changed by the code.
If there are no enhancements, check whether the master data is being properly maintained in the source system.

Function Module Extractor with Delta

I'm very new to working with the BW, so I hope I'm explaining my question in a way that makes sense.
I need to make a BW extractor that pulls data from at least one table, possibly more, and which also calculates some data.
I think the only way I can do that is by using an extractor with a function module.
I've been looking at the examples in function group RSAX, and I think I sort of get it, except for one part.
I'm really confused about how the delta works.
I'm looking at the example: RSAX_BIW_GET_DATA_SIMPLE
Does it even use a delta?
I'm trying to understand how the delta gets passed, and how it gets used to filter the data in the function module. I'm not sure if it's something I need to code in myself, or if it's something that BW does by itself, or what.
I'm not sure if I'm making sense, but if anyone could help me, I'd appreciate it.

Thanks guys, you've been super helpful so far, so I'm just going to keep asking questions. I promise to award points at the end
I'm looking at it now, and I think if I change it to read from a table, instead of read from a function module I can use the 'numeric pointer' option for the delta. (Does that just mean a number? For example, payroll runid is a number, so I could use that and only get new payroll runs?)
However, there still are some calculated fields they want. Someone mentioned doing that on the BW side. How would that work?
Sorry for such vague questions, but any help is really appreciated.

Function Module Extractor with Delta Functionality

Hi Friends,
I have to extract the entire data of CDPOS table in R/3 , as its a cluster table I am unable to build a view, I am planning to go for FM extraction, Could someone help me as how to build it with Delta Functionality.
I think I need to develop the Datasource, with Extract Structure,( Do I need to create a Structure in SE11) Please help me out .
Thanks,
Krish

Hi,
you can either use an existing structure or else create one on your own. (SE11).
The DeltaHandlig fairly easy.
When having finished the extractor (FunctionModule, Structur and DatasSource), go to the "generic Delta" button and select the relevant field.
The Generic Delta and its DeltaPointer is managed within the DeltaQueue (RSA7) and works more or less like a selection. Don't think too hard about it in your function module except taht you need to select by this field in your FM.
Did that come clear?
hth
Cheers
Sven

Help with delta load

Hi Gurus!
I have a problem and I am not sure how to solve it.
Every month we receive a flat file with 2 months of accounting data. This data goes into a ODS. The next month we receive a new file and it contains the new month and the previous (again) but with some new values for the pervious month. My problem is that I don't want the full value to go from the ODS the second time but just the difference. Simplified example:
File 1 (period, amount):
200602     2000
200601     1000
File 2
200603     1500
200602 2200
I want the ODS to delta load to another ODS like this:
After first file:
200601 1000
200602     2000
After second file
200603     1500
200602      200
Do not sound like rocket science but I am not sure how to solve it best? Grateful for any suggestions!
Best Regards
Pontus

Hi Roberto!
I totaly agree on that I wont lose my 200601 data. I just wrote the records in the delta load (not the records in the ODS). Sorry if it was not to clear.
I now realize that I have to write some ABAP. I thought there was a way to solve it without that.
Thanks for your answer (you will be rewarded).
Regards
Pontus

Generic FM extractor with Delta

Hello all,
I am trying to create a delta function module extractor on a table. I have creation date ANDAT, last change date AEDAT and a deletion flag on the table.
FM has to handle history, new and changes.
How can I generate delta? Can I just use RSO2 to set up delta? How can it be done? Also, can I get the code for a generic FM delta extractor?
Please help.
Thanks,
Anirudh.

Hi Sajeed,
So, I do not have to handle delta in the extractor at all? Just create a function module based extractor with all the fields and actually take care of delta in the infopackage??
The creation date is for newly created records and the change date is for changed records.
My email is [email protected]
Thanks,
Anirudh.

Problem with delta load

Hi Gurus,
When I am doing a delta load from ODS to Cube it is taking lot of time....
When I clicked on PSA it is saying " An error occured when reading PSA DATA"...
What should I do???
Data is coming from flat file....

Hi
could you give the complete information about the error msg from monitor screen..status tab.
Check if any shortdumps in st22
Check for error logs
Also check in sm21.
It would be easy for us to give solution if you give the complete error msg.
REgards
Rak

Issues with Delta Loads.

Hi All,
I hope you don’t mind to provide a suggestion about the delta load of Purchase Orders.
There was a request from Procurement team and they complaint that the data is not looking right.
For example: for a given purchase order the exemption flag is displayed as ADE.
Before change:
Purchase Doc Number
Puchase Exemption flag
90002106
ADE
They want this to be displayed as:
After Change :
Purchase Doc Number
Puchase Exemption flag
90002106
So ABAPER has included the logic in ECC Functional Module to populate the Extract Structure for Data Source to display above result. But the overnight run didn’t pick up the changes to above record in BW. The loads are delta loads.
So my Question is:
· This load for the Infocube Purchase Orders is delta load. Does change to Function Module will pick up the changes to old records as well? I mean if we are doing delta load does the old records gets changed and updated in CUBE or should I delete the data from all the PSA and Infocube and run the load into CUBE to pick up the changes. Am bit worried about deleting the data from Infocube as it may have history data (because of delta load). Total records in cube are 800000 records.
· Another question does the process chain trigger the function module to load the data into Extract Structure of data source in ECC (am bit confused about this process in ECC)?
Please suggest me how can I capture those changed records?
Any help would be much appreciated. Please let me know if you need more info.
Thanks in advance
Sandeep

Hi Sandeep,
I am little confused from your post. You are using 2lis_02_SCL or the generic FM datasource?.
Also it looks like new custom field added in your client. I never saw any purchase exemption flag even though i am working in purchasing flow for last 2 years.
W.r.t purchasing , deletion flag will be there which will come from EKPO and have the values S or L ( Deleted or Blocked).
You can block or delete a PO aslong as GR was not happened. Other wise you can do it. So use the EKPO-LOEKZ for your use.
Regards,
Rajesh

Generic extractors with delta

hi all,
can any one please provide any thing on generic extractors particular to delta (time-stamp)
VRKR

Hi,
please search the forums. This question has been asked already a lot of times. Additionally you might check my business card --> there is a link to a weblog related to that issue.
Siggi

Extractor with delta

Hi Everybody,
I am using a delta mechanism and would like to check the actual value of the field used for the delta. Where can I find this value?
Thanks in advance
FedeX

Hi Fedex,
Check in RSA7. Check the last column i.e. STAT column. But before this you have to upload the data atleast once.
If useful..assign points.
Regards,
P B

Sharing an extractor with another BW system possible?

Dear all,
We currently run BW3.1. Now we would like to install NW2004s next to it.
Is it possible to use the same extractor with delta loads when you have only 1 source system with 2 BW systems?
Do both BW systems contain all information after delta loads?
Thanks in advance,
Ralph

Hi,
Yes, its possible. You can have just one source system, feeding multiple BW systems. But in your case, I'll be careful as you are trying to upload data to 2 different versions of the BW system. You have to check and test for the PI versions on the R3 side. Your current set of PI versions on R3 will have to be upgraded if you are planning to connect the system with the netweaver 04s version. Once you upgrade, you also need to make sure that the data loads work fine with your older BW version as well.
Cheers,
Kedar

Enhance LIS_ extractor with delta load

Similar Messages

Maybe you are looking for