Enhanced seamless install badge, asking user "open, save, or cancel"

I’m trying to get it to start the install automatically. it seems to install my air app automatically right after installing air runtime ,but if a user already has the air runtime it ask them “ open, save or cancel"
Can the Enhanced seamless install badge always install automatically?

Thanks Romil, I want to make sure that I asked my question correctly.
If the user gets air runtime installed the badge goes directly to the install and ask them if they want to install it.
If the user already has air runtime it gives the open, save, cancel box.
Is there a way to get the badge to go directly to the install question rather than open, save, cancel box if they already have the air runtime?

Similar Messages

Each time I open mail in outlook , a window opens up asking to open/save or cancel numerous Firefox files

This happens several times I open mail in out look. several windows pop up heading file down load.It asks whether I would like to open/save or cancel. When I try to open it goes to internet and start Loading...but nothing happend. example of one such file in C:\document&Setting\Hirak\Local Setting\temporary internet file:
{FF77738-A07D-ESFDA23A9A5}.html Type Firefoxb document 6.35 Kb.
This is driving me crazy

Believe it or not I managed to "fix" this issue with one mouse click.
I minimized the "People Pane" which in my instance of Outlook is on the bottom of the message area. It seems to be some kind of connection which allows you to connect your own Microsoft contact list with social networking sites for the same people.
Once I minimized this sub-screen, the issue disappeared.
Of course, I only figured this out by accident, and only after 90 minutes of reg edits and reboots.

Seamless Install/Badge.swf problem

Hello, I'm trying to use the badge.swf file to perform a seamless install via a web page. I've used the supplied files (default_badge.html and badge.fla) to modify the configuration to meet our needs, and I've reviewed the example article at http://www.adobe.com/devnet/air/flex/quickstart/seamless_install.html on how this process should work. Let me say that when viewing the article, I can download the example "Hello World" app with no problems at all.
In my situation, however, I'm getting a Javascript error when I click the badge.swf movie appearing in my web page. The error doesn't really make sense because, while I've seen the "Object doesn't support this property or method" message before, the location doesn't exist (line 1 character 102). The relevant air file does download for me even after receiving this message, but for some other users it won't, and since I'm just a developer and not the primary user of this AIR app, that's no good!
On doing a View Page Source for the above article, I notice that while the article itself states that the badge.swf is included via the AC_FL_RunContent function, in actuality it appears that the movie is being embedded by a mechanism which, to me, is wholly unrecognizable:
<script type="text/javascript">
   // <![CDATA[
     var props = new Object();
     props.swf = "/devnet/air/samples/badge/badge.swf";
     props.id = "flashplayer-marquee";
     props.w = "217";
     props.h = "180";
     props.ver = "9.0.115";
     props.c = "#fff";
     props.wmode= "opaque";
     var swfo = new SWFObject( props );
     swfo.addParam("allowScriptAccess", "always");
     swfo.addVariable ("appversion","1.0")
     swfo.addVariable ( "appname", "Hello World" );
     swfo.addVariable ( "appurl", "http://download.macromedia.com/pub/developer/air/sample_apps/HelloWorld.air" );
           swfo.addVariable ( "airversion", "1.0" );
           swfo.addVariable ( "imageurl", "/devnet/air/samples/badge/helloworld.jpg");
     swfo.addVariable ("appid", "helloworld");
     registerSWFObject( swfo, "badge" );
    // ]]>
   </script>
I'm pretty clueless as to the whys and wherefores of this block of code. What I do know is that the download process works just fine in the example article, but for me it's not working correctly. If anyone has had any experience with this and can shed some light on what I might be doing wrong I'd really appreciate hearing about it. Thanks in advance for any help you can give.

Thanks Romil, I want to make sure that I asked my question correctly.
If the user gets air runtime installed the badge goes directly to the install and ask them if they want to install it.
If the user already has air runtime it gives the open, save, cancel box.
Is there a way to get the badge to go directly to the install question rather than open, save, cancel box if they already have the air runtime?

Adobe AIR Seamless Install Badge PROBLEM

Hello,
my air badge installation stop working few days back (do not know exactly how many).
Has anybody else this issue here?
Any advice probably.
Thanks

Hi Chris,
Thanks for the Reply.
After quite a bit more testing and some digging around under the hood, I've solved the problem. Below is what I found out, hopefully this will help others out with the same problem:
When downloading Air and the Air app in one go using the install badge, trying to open an SQL connection was throwing errors on most machines (it was not limited to Macs alone). If i down loaded Air separately, then installed the app with install badge (with air already installed) it worked on some machines.
The error was caused by trying to create the database file at the wrong in the file system:
// Causes Errors some machines.
var dbFile:File =File.applicationDirectory.resolvePath (databaseName);
// Works fine.
var dbFile:File =File.applicationStorageDirectory.resolvePath (databaseName);
I'm not sure why the different installation process showed up the errors on some machines and not others, but it's fixed now.
Hope this helps.
Ali

MII 12.2 workbench does not open, only ask to open/save workbench.jsp

Hi Experts:
I found an answered question in the forum about my problem, but it didnt help me. It was posted 3 years ago. So SAP
So here I go
I was working fine with the mii 12.2.2 workbench using J2EE 7 and suddenly the workbench presented this problem
I received a system message about to open or save workbench.jsp,
I uninstall Java and install JDK 1.6.021 due other clients have this version without problems, so I compared with one of them browser settings and java settings. The same question persist. I unistalled 1.6.021 and installed the same as the server 1.5.0222.
We already installed the last patches from dec 15, 2011, and still not working.
I already clean the java console, and inside it I set the network to Direct Connection.
The MII server is
OS: Win2008 Server 64 Bit
JDK: 1.5.0222 32bit
NW: 7.11 CE SP7
MII: 12.2.3.1
IE8
My client
OS: Win 7
JDK: 1.6.021 bit32
NW: 7.11 CE SP7
MII: 12.2.3.1
IE 9
Can you help me please. I need to continue work and go live next week.
Thank you

Hi
Thank you for answer.
I used 3 different kind of JVM 5.022, 6.021 and J2EE 7. The workbench was working fine until last week,
I dont receive any error message, only that I have to save/open workbench.jsp, I tried to save or open or even cancel and workbench did not open.
I clean Java Console, I remove applets, I delete files from IE 9, I run the ccleaner, uninstall google bar, compare my java and ie explorer configurations with other clients that is working. I set network connection in java as Use browser configuration and Direct connection, nothing works.
I read even these threads and follow the directions in there
http://forums.sdn.sap.com/thread.jspa?threadID=1130852
http://forums.sdn.sap.com/thread.jspa?threadID=756892
The problem here is that I will go live on Jan 16th, and the only way I can develop is on site connectig to server via remote.
I dont know what to do.
Thank you
Ruben

How to get Internet Explorer to ask for Open/Save

For most binary file types, Internet Explorer asks whether you want to open or save the file, and gives you a further choice of skipping that prompt in the future. Nothing I do gives me access to this prompt for PDFs and Adobe Reader. On a computer out of the box, with a fresh installed of Adobe Reader set not to open PDFs in a browser window, a click on a link to a PDF will open automatically in Adobe Reader. It will not prompt me whether I want to open or save the file.
I can edit this choice in the registry for any other type of file. For instance, if I set MP3s to open automatically in Windows Media Player when clicked, and then I change my mind, I can delete a certain key in the registry and I'll be prompted once again. This is not true for PDFs associated with Adobe Reader.
So my question is, how can I get Internet Explorer to prompt me whether I want to open or save the PDF?
I'm using Windows 7 and Internet Explorer 8.

From Microsoft ou will see IE is not available for the Mac:
http://windows.microsoft.com/en-us/windows/answers?tId=11114787-fc3a-4179-a0ca-d f6b407caec4
You can try the web page in Safari (which is already installed), or
try downloading and installing firefox (download from here: https://www.mozilla.org/en-US/firefox/new/) or
try google chrome (https://www.google.com/intl/en/chrome/browser/?brand=CHMA&utm_campaign=en&utm_so urce=en-ha-na-us-bk&utm_medium=ha)

How can i set Adobe to open pdf from a secure website in the browser, it just pops up and asks to open save or download. we want it to just open the PDF directly in the browser with no popups, using IE 11

Hi,
We are running Internet explorer 11 with the latest version of Adobe Reader.
have found when users login to a secure website and it has pdf links on there, it doesnt open these pdf directly in the browser, it wants to save them and then open them.
is there anything we can change to allow them to be opened directly in the browser?
Thanks,
Cam

Hi campbellk19046717,
Please refer the KB doc link mentioned below if that might help:
Acrobat Help | Display PDF in browser | Acrobat, Reader XI
Let me know.
Regards,
Anubha

Keeps asking to open/save the same Adobe Reader X installer file everytime at startup

Tried to update Reader X after Plug-in checker found installed version out of date. Encountered "Download Configuration Failed" error after downloading and executing installer (turns out effing Adobe has known about this problem since mid July but has chosen to continue with providing this installer on their download site). Following Adobe Support instructions, uninstalled Reader and tried again but without success. Finally found another link on Adobe Support for another installer which worked.
However, now when I start up Firefox, a pop-up will appear saying that "You have chosen to open "install_reader10_en_air_mssd_aih.exe" ... would you like to save this file?" (the same bad installer file) even though I have saved it a few times already to try to get rid of the pop-up. This happens at EVERY start-up.

Try using a different web browser. I was having this same problem when I was using Firefox, but then tried it in Opera and it worked like it was supposed to. I guess Adobe was in too much of a rush to release another product that they neglected to make sure it worked...They would get an 'F' in a software engineering course.

Would like to allow PDF files to open straightway in the browser rather asking for open save option. pls help

I m running a website on intranet. while accessing pdf file more than 8 MB in size. A window having Openwith, Save option pops up. i would like firefox to open PDF files of any size strightway in the browser without pop ups. Please help
Thanks in anticipation

kearly - thanks a million for posting both the question & the reply! I just unchecked that little box by accident, & couldn't figure out for the life of me how to fix it. Thanks again!!

After installing updates-Removing user-opens to Welcome screen

As the title says, I am setting up a computer for a relative and since the time I worked for Apple, I have forgotton the terminal commands to remove the test user I set up and reverting back to the welcome screen so the new user can set up the machine from scratch. I looked around here and could't locate anything pertaining to this specific issue using 10.7.X. I am not sure if the process changed since 10.4 or 10.5 but hope someone on here can assist me.
Thanks Much!

"Anyone ever heard of anything like this???"
Yes, mine did the same thing but not after a software update. I called and Apple is sending a technician to my house today to replace the hard drive. I could not boot from the system CD, a retail CD, in safe mode,in target disk mode or even from my backup drive. Thank goodness I have Applecare cause it isn't costing me anything but some time.
If you cannot get it to start up in any manner that generally means a hard drive problem. When the drive goes bad, the computer will not do anything. At least that is my experience. The same thing happed to me about 5 years ago with a brand new G-5 iMac. In that case I could not boot up from any media or in any way. Apple sent me a new drive and I put it in myself. It was under warranty also.
This is why it is so important to have a backup. With hard drives it is not a matter of if they will fail but rather when they will fail.
Good Luck!!

Express install always asks user to close browser window

Is Adobe in charge of the code that closes browser windows at
the end of express install?
I'm currently using SWFobject 1.5 to embed my flash movie
with express install active and neither IE6, IE7 or firefox will
automatically close once express install has finished. It used to
be that IE would close and reopen the window, firefox never used to
but that's a different topic I'm sure.
Perhaps Adobe changed something?

Never mind, found the answer here:
Re: Closing brower window

How to ask user to discard or save changes in a custom form

Hi
let's take emp, dept... whenever user is updating DNAME if it has been assigned to more than one employee.... the form should show a warning message and should ask user to SAVE or DISCARD option?
How can you do that. is there any built-in function or trigger to pop-up SAVE or DISCARD window option?
Thanks
ESL

Hi
Key-next-item trigger is not working. my block is a MULTI-RECORD block. i wrote below code in PRE-UPDATE trigger, it's working when i select SAVE and not working when i select DISCARD option(alert has two buttons SAVE and DISCARD)
DECLARE
lv_assigned_more_prd NUMBER;
alert_button NUMBER;
e_assigned_more_prd EXCEPTION;
PRAGMA EXCEPTION_INIT ( e_assigned_more_prd, -100501);
BEGIN
IF :System.record_status = 'CHANGED'      THEN
SELECT count(*)
INTO lv_assigned_more_prd
FROM xxgl.xxgl_sdroy_product_je_rules je
WHERE je.je_rule_id = :XXGL_SDROY_JE_RULES_V.je_rule_id;
IF lv_assigned_more_prd > 1 THEN
     alert_button := Show_Alert('ALERT001');
     IF alert_button = ALERT_BUTTON2 THEN
     RAISE e_assigned_more_prd;
END IF;
END IF;
END IF;
EXCEPTION
WHEN e_assigned_more_prd THEN
raise form_trigger_failure;
WHEN OTHERS THEN
fnd_message.set_string(' Oracle Error -- '||SQLERRM);
fnd_message.error;
raise form_trigger_failure;
END;

Install badge fails with '@' or '.' in appinstallarg

I'm trying to run the AIR install badge with my application and I would like to pass down an varible (in my case, an email address) to be read when the app is first run. However, whenever I have the '@' or the '.' character as part of the appinstallarg parameter, the badge fails to even start downloading the file. If I change the appinstallarg to be a single word (like 'blah') it works fine. It's also fine if I put spaces in the argument, just not certain other characters.
I have also tried url encoding the argument (using %40 for '@' and %2E for '.') but it hasn't helped.
I'm considering just transcoding the bad characters into various numbers of spaces or something, but it would be nice if there were a way around this.

Regarding the newer badge install:
I'm having a few issues where it's not seeing my application
already installed (AIR app with Flex).
The application is definitely installed but it keeps opening
the .AIR file and asking to open/save.
Does the AIR app have to be signed properly (i.e. a real
certificate, paid for) to be able to fully work with the badge
installer?
I have set everything correctly in Flex
(allowBrowserInvocation: set to true)
and in the HTML I've set it to correctly based on what is in
my Flex file (appid, appversion, name, etc)
I've set airversion to "1.0".... what is 1.0.M6 ? (is this
Beta 3?)
I haven't set "pubid" to anything, just left as ""... would
this affect the way the badge works?
Could I request an update to the badge system... as it's
doing a lot of checking for Beta3.
It would be much better and cleaner if it just looked for the
current AIR version and then if it was not present installed it.

Report opens Save as Dialogue Box, on client.

Hi,
I am using Report Builder 11.1.2.1.0, and I am calling a report from Form.
If I run/call report on my own pc it opens perfectly in browser (pdf format), but if same report is opened on client pc, it opens Save As dialogue box and asks user to save the report.
Can you please let me know, how can I achieve to open a report in browser on client's pc, without opening Save As Dialogue.
Eagerly waiting for your replies.
Regards,

That is probably because the user's browser does not support opening a pdf document.
Most browsers support pdf, some need a plugin. Check what happens with any other pdf document on the web that you want to open on the user's PC, like http://docs.oracle.com/cd/E16655_01/server.121/e17643.pdf

Install badge on Joomla site

I've used the "Badger" tool to create a lovely seamless install badge that works on a regular HTML page. However, when I try to embed the code into a module to site on the Home page of my Joomla site then it displays the error message about upgrading the Flash version, even though I know that's not needed.
There's a line that has to be embedded in the <head> section of the page -
<script type="text/javascript" src="swfobject.js"></script>
and I've included that in the index.php that's in the root of the JA_Purity template folder (with the src parameter above fully qualified to the location of the swfobject.js file) but can only assume that it is in the wrong place because I still don't get the results I want.
I'm a total novice to Joomla: please can someone hand-hold me through getting this fixed?!

Bregent;
Thank You for Your reply. Both You and SnakeEyez have been very helpful.
The code at http://www.useragentstring.com/ will do the job of determining the windows version.
Have learned from Access Forums that "Late Binding" will do the job of determing if the User has MSWord installed AND which version., (2003, XP, 2007, 2010) and that the Package & Deploy feature in Access will register a DLL & OCX Service.
What I haven't learned yet; nor have been able to find is:
How to place a "Command Button" on the web-site that will start the entire process.
Know how to place a "Submit" button for an on-line form and know that the script for "Submit" can be changed, BUT a "Submit" button is very limited.
So the only question remaining is:
How do You place a "Command Button" on a web-site that will start the entire process?
IE: Determine the version of Windows then start the download of the "Package & Deploy" application.
Give You an example. When You find the driver at HP.Com there is a "Download" button that when clicked starts the download.
That's what we need...
a "Download" button.
Where is the option to "Insert" a Command Button in Dreamweaver? Is there one? If not where do I start my search for an item that will accomplish the same thing?
Thank You for taking the time to read this post.

Enhanced seamless install badge, asking user "open, save, or cancel"

Similar Messages

Maybe you are looking for