Enhancement/Exit/BADI for Routing
Dear All,
I have the following scenario.
In Routing,
1. Work center should always be with 6 digits
2. Final operation control key should be with PP01
3. If work center is XXXX, my cost element should be 5061007. if it is different work center, my cost element value may vary.
(The link between work center and cost element, i will keep in one Z table)
4. Labor time will always be equal to machine time
These check should be done before saving the routing. Can I achieve these through any enhancement or exit or any.
Please guide me.
Vijay.
Hi,
BAPI's for routing
BAPI_ROUTING_CREATE - Creation of a routing
BAPI_ROUTING_EXISTENCE_CHECK - Check whether routing exists
BADI
ROUTING_EXIT - User Exits for Routings
Exit
IWO20001 PM order: User exit to pass routing to order
Similar Messages
-
User exit / BADI for training and event management
Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOIHi
BADI's for Training and Event Management
HRTEM00MASTERDATA HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT Customer Enhancement: Name Format
RHPV0001 Customer Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA HR: Training and Event Management - Master Data
~~~Ganesh Kumar K. -
User exit/BADI for Deleting the Empty Handling unit
Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan -
Need User-Exit / Badi For CO11N selection screen
Hello Gurus,
I need to add an extra functionality in the selection screen of the Tcode CO11N .Can you suggest some user exit or badi for the same .
The Functionality is : We need to make the field 'Reason' as mandatory whenever there is an entry in the field 'Scarp' .
Waiting for your valuable suggestion on this .
Regards,
Abhijit MandalHi,
Followings are Enhancement or BADI for Tcode-CO11N
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
Regards. -
Exit/BADi for ml81n to check GRN date should be PO Date.
Exit/BADi for ml81n to check GRN date should be > PO Date.Kindly suggest .
Hi,
You can achieve it using the below enhancement.
Enhancement: SRVEDIT
Function module: EXIT_SAPLMLSR_001
Regards, -
Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
JijoExit Name Description
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines -
User-Exits/Badis for T.Code Co01 Production Order
Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........These are the available user exits..
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines -
Reg. Exit/BADI for changing item data of PO in ME22N
Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan KThanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header - im_header->get_items
2. Loop the item list and get the line item record - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K -
User Exit/Badi for G/L account assignment in ME21n/ME22n
Hi All,
I need user exit/badi for account assignment in item details for following requirement.
If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
Please suggest me suitable user exit for this.hello,
follow the steps.......
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u,
santhosh -
Request for info. on USER EXIT/BADI for FB60
Hi,
This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
]Please guide some alternative solution rather than user exit and badi.
I dont think the following user exit and badi are used for withholding tax.
I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Badi
FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
Every expert answer will be rewarded.
Thanks in advance
CraTry Business Transaction Events. Transaction code BERP.
Regards,
Zoltá -
User Exit/ BADI for ME01- Sourcelist creation
Hiii
We need a place exit/ BADi to do vendor validation before saving soource list in transaction ME01.
Please provide suitable exit / badi for above requirement.
Thanks ...in advance.!!
Regards,
NileshEXIT_SAPLMBMP_003 AMPL0001 User subscreen for additional data on AMPL
EXIT_SAPLMEKO_001 LMEKO001 Extend communications structure KOMK for pricing
EXIT_SAPLMEKO_002 LMEKO002 Extend communications structure KOMP for pricing
EXIT_SAPLMEQR_001 LMEQR001 User exit for source determination
EXIT_SAPLMEQR_001 LMEQR001 User exit for source determination
EXIT_SAPLQBCK_002 QBCK0002 Extended check in procurement -
User Exit / BADI for F-02 during SAVE to update BSEG Line Items.
Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
NithyHi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM -
Exit/Badi for Accounting Document
Dear Friends
Is there any user exit/BADI for accounting document. My requirement is quite simple which you would also faced in many implimentation. Client wants number ranges business area/plantwise. I was just thinking as plant/business area is a line item field it may be little difficult to have different number range controll at that level, so I thought we could use user id as the import parameter. But these is possible once I get any user exit/badi for number range change. We dont want to create so many document type also.
Thanks and Regards
Pankaj GuptaHi Marta,
Check these notes
SAP Note 1259505 - FAQ: New cancellation procedure in SD,
SAP Note 400000 - FAQ: Transaction VF11: Cancellation of SD billing documents
See with attention note 1259505 question 4. It says
Most of the userexits in the SD-FI interface (see note 301077) will not be
performed.
So, try to do it with BTE's
Sorry, try with USEREXIT_PRICING_COPY in program RV61AFZA.
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Nov 21, 2011 9:15 AM -
In ME21N,User Exit/BADI for Defaulting Vendor number at item level.
Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji RHi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu -
User Exit & BADI for controling the END user in co06
Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCKAnswer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??
Maybe you are looking for
-
How can I calbrate your program with my screen colors when printing
I need to calbrate adobe acrobat 9 pro to print the colors that show on my screen, How can I do that?
-
Problem printing to a PC based HP from MAC OSX 10.3.9 w/ router
I have the following Belkin Router; F5D7230-4. The router is hardwired to the PC and has a F380 (F300 series) HP printer USB hardwired. I also have a iMAC G5 OS x 10.3.9 which is online, connected to the router via a ethernet cable. I have no wireles
-
Idoc- xi - (multi inserts)jdbc
Hi experts I have this scenary: Idoc-> xi ->jdbc(tables oracle 9i) I want to insert into two different tables of the data base, at the moment the idoc will be sended , for that I make a message mapping, idoc vs MT where the MT c
-
Company code field blank while creating new shopping cart
Hi , We are in SRM5.0.When we try to create shopping cart , the company code is not getting defaulted even though default attributes are maintained in PPOMA_BBP under BUK.We have a classic scenario. Please throw some light to this problem. regards Su
-
Friends, Because it is necessary to extend the schema in Active Directory when you install the Logon Manager ESSO. Thanks.