Enhancement is in active state but not giving result.
Hi All,
Could you pls help me with this. I created an enchancement for a function module MARM_GENERIC_READ_WITH_MATNR. The enchancement is in active state but not giving the result. The result before and after enchancement is the same.
Thanks,
GC
Hi Guru,
If you have created an implicit enhancement point you need to make sure that enahncement point is active and as well the Function Module is also Active.
Second thing is that if you have written any code inside the enhancement point, then make sure that you are entering the Ehancement point coding block.
For this do put a break point and do a debug test the coding - what exactly happens through the Coding.
It may be that the Coding Block inside the Enhancement point is not getting executed or the ehancement point is not getting executed(chekc for what reason ?)
Based on the abvove inputs hope you would have got some clue or would have got the solution.
If found useful please do reward
Encourage others to answer your queries by rewarding them suitably
Thanks
Venugopal
Similar Messages
-
hi,
we have multi server or wfe architecture. configured search service on one server 01, central admin is 02, and query as 03, now crawled content with hostname:port of 01. everything is fine.
but now when we trying to search results its giving results on server 01 which is index and query role. but didnt return any results in other servers.
help is really appreciated.
Thanks,
SJI thought you are posting question in wrong forum. Please move the question to
https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointsearch. There some one will help
Ravin Singh D -
User is in team state but not in team summary - Cisco supervisor desktop
We have Cisco supervisor desktop where supervisor can see user in team state but not in team summary?? Any clue why is could be happening??
Any help is much appreciated
Thanks!Hi David,
Not sure of setting an alert but Supervisor can use "Table 17. Summary display data"
Agents Not Ready : The number of agents in this CSQ who are currently in the Not Ready state.
And "Table 12. Team Summary display data (cont’d)"
Max Not Ready : The longest time the agent spent in the Not Ready state today.
And also refer the section "Creating Supervisor Work Flows"
Using the Supervisor Work Flow Administrator feature, you can configure your desktop to perform certain actions based on queue statistics for calls waiting and calls in queue for specified skill groups.
Refer the below link for more information on this.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/csd85ccxug-cm.pdf
Hope it helps.
Anand
Pls rate helpful posts !! -
Indesign cc files not saving but not giving an error message
Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
JanineAsk in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium -
Service Call in SBO 2005 B PL 38 - Activity done but not added to call
Hi All,
I have updated PL 38, SBO 2005 B, I had created Service call, it was created successfully, now i have done activity of return but it dosent add to activity tab and gives us error -> "Generate SCActivity : A Service Call Activity dose not exist"
Can any one has idea or solution of this please.
With Warm Regards
Chintesh SoniHi
I am not sure note :891809 is suitable for your issue or not.
this note is about "The Activity exists but it seems that there is no link saved between
Service Call and Activity."
hope it could be helpful. -
Save object state but not the data
Hi Everyone,
I'm trying to serialize a form so that I can recover the state information such as size of the form at close, size of splitpane separator, and size of each column of a JTable within the form.
However, I don't want to save the JTable's data. Also, I'm not sure about the procedure for deserialization.
For example if I have a line like:
frame.getContentPane().add(new JTable(tableModel));
next time I read the form, it already has the table within it so I shouldn't really create it or add the JTable to it, am I right?
Any comment to clarify this is really appreciated.
Thanks,
AlOk here is what you got to do just like createing your own subclass of JFrame
you should also create subclesses all the GUI componants you going to use in the application that need their state saved and restored.
All those class should implement a comman interface which has getState and setState (Ex:- CJTextArea, CJTextField, CJTable, CJFrame, CJInternalFrame, CJPanel .....). and thos subclasses should be used to create the widows
You will also need a several state classes for various types of components
such as
ComponentState -- Super class
ContainerState -- to hold stateobjects given by the components in a perticuler Container (ex:- JPanel)
FrameState
TextCompState -- text components (JTextField,JTextArea)
ListState
TableState
and the getStste and setSatate of the form should be written to return an object which contains the state of the form and all the other state objects returned by its nested components.
This kind of thing is done in most of the software organization in (Not just to restor the state but for many different tasks) that develop large applications with complex user interfaces.
Its worth spending some time to devalop such an API becouse it can be used in any programdeveloped after that.
The company I work has done excatly that some time ago but I cant post any code here (You know why) -
Giving web authorization but not giving bex analyzer authorization
Is there a way that I can give authorizations for a user only to look queries from web site but not from bex analyzer.
Hi!
If you dont give the authorization S_RFC to a user he can not work with Business explorer but he can access the queries from web
hope this helps
with regards
ashwin -
Enhancement working in R/3 but not in portal
I have a crm enhancement (version 4.0). I have created one badi implementation and anohter one was already exsisting which i have change. This is working in SAP (r/3) but in portal it is not behaving in the same way. I am not understandn what link is missing. I could see some BSP classes in the system, but i am not sure how to find out where to do the modifications.
Is there any way to debug from portal?
I am trying to give a pop-up message in this enhancement which will restrict from saving an activity based on certain conditions. That pop-up is not coming.searched forum,got some clue from that
-
Enhance is ok in Dev but not in QA
Hi firends!
I made and enhace on datasource 0FI_AR_4 with new fields, this is working ok on dev.
After the transport, in QA I can see these newfields, but they are not filled with the new content.
I check the project, the enhance and the abap code in QA and seems to be active / ok.
What is wrong? Is necessary activate the project manually in QA?
Thanks in advance!Hi
Check whether the below things are active or not in QA.
Data Soruce.
Enhancement project
Enhancement funcation module/include.
If all the above things are active, then you need to check the table/ logic whether the data is available for the enhanced fields or not.
Thanks -
N80 works in the States but not Europe
I purchased an N80 in the States and it worked with my T-Mobile SIM but then I moved to Cyprus. I got a Vodafone SIM and now the N80 will not connect to the network. The new SIM works with a different phone so I know that is not the problem.
Any ideas on what I can do to get my N80 working would be most welcome.3G won't work as different frequencies, but if you set the phone to GSM you'll be fine.
If you are saying that you get a SIM error, then you need the phone unlock code from the supplying network (handset).
Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
T-Mobile: N96 -
Activating objects but not showing up in Cache Status Overview
Hello SDN.
We are on PI 7.1. A strange thing started happening. I can change an object and when activate, I get success, but in checking the Cache Status Overview it does not show up. We set up our SLD as follows
SC_Systems (i.e. SAP, Outside Vendors etc) (all service interfaces and actions go here)
Which is the parent of SC_Mapping (all operation and message mappings)
Which is the parent of SC_Models (all DataTypes, ED, and Message Types go here)
So
SC_SYstems
SC_Mappings
SC_Models
When making a change to the models SC and activate we get the following problem above, also for SC_Systems. But when I do this for mapping there is no issue.
One thing that is different is a new developer accessed the DataType from the SC_Systems and changed it, thus causing a conflict (We usually access and change DT, MT etc in SC_Models.
Since then it seems both are not allowing activation even though it says successful.
We have bounced the system, done all cache refreshes that I can think of and are about to go back 3 days to a backup store point, but want to see if anyone has any idea what the problem could be.
Thanks in advance
Cheers
DevlinHi,
It may be too obvious, but have you checked the Change Activation List?
Perhaps the objects that were edited are "pending" there.
Clear the SLD cache later.
Regards,
Caio Cagnani -
Postings are made to old activity type but not new in Process Order.
Hi friends,
We have created old activity type and assigned. However, the postings are made to old actity type. There is no plan price for new activity type.
So please suggest whether I missed any thing here.
Thanks,
Venkata Raju
Edited by: venkata raju khottari on May 14, 2009 11:35 AMYour information is very vague, and incomplete.
I assume you created a new acivity type, and not an old one? Where did you assign it? KP26, KP06, C203?
Did you recalculate your plan activity prices? KSPI. Download new qties? KSPP.... -
Statement works as a straight insert statement but not in a procedure
I can run the folloiwing statement as a straight insert
INSERT INTO MYTEMP
SELECT CASE WHEN line_num < 10 THEN NULL ELSE AVG( close) OVER (ORDER BY trade_date ROWS between 9 preceding and current row) END AVG_10
FROM stocks_hold
WHERE symbol = 'DIA';
but when I try to compile it within a procedure I get the following error
PL/SQL: ORA-00905: missing keyword
The only difference is that I loop through a cursor and do the insert using a variable for symbol
I'm done banging my head against the wall, any help would be appreciated.
Thanks
DGood point, newbie mistake
Here is the entire procedure
CREATE OR REPLACE PROCEDURE sp_doAll IS
lc_SYMBOL VARCHAR2(50);
CURSOR lCur IS
SELECT DISTINCT SYMBOL
FROM STOCKS_HOLD;
lRec lCur%ROWTYPE;
BEGIN
DELETE
FROM stocks;
COMMIT;
FOR lRec IN lCur LOOP
lc_SYMBOL := lRec.SYMBOL;
INSERT INTO STOCKS
(symbol, trade_date, open, high, low, close, volume, LINE_NUM, avg_10, avg_20, avg_50, avg_100, avg_200)
SELECT symbol, trade_date, open, high, low, close, volume, LINE_NUM,
-- CASE WHEN line_num < 10 THEN NULL ELSE AVG( close) OVER (ORDER BY trade_date ROWS between 9 preceding and current row) END AVG_10,
CASE WHEN line_num < 10 THEN NULL ELSE avg( close) OVER (ORDER BY trade_date ROWS 10 preceding) END avg_10,
CASE WHEN line_num < 20 THEN NULL ELSE avg( close) OVER (ORDER BY trade_date ROWS 20 preceding) END avg_20,
CASE WHEN line_num < 50 THEN NULL ELSE avg( close) OVER (ORDER BY trade_date ROWS 50 preceding) END avg_50,
CASE WHEN line_num < 100 THEN NULL ELSE avg( close) OVER (ORDER BY trade_date ROWS 100 preceding) END avg_100,
CASE WHEN line_num < 200 THEN NULL ELSE avg( close) OVER (ORDER BY trade_date ROWS 200 preceding) END avg_200
FROM STOCKS_HOLD
WHERE SYMBOL = lc_symbol
ORDER BY TRADE_DATE;
END LOOP;
COMMIT;
END sp_doAll;
This compiles and runs, but, when I try the alternate way (that gives me the accurate results)
Uncomment this statement:
-- CASE WHEN line_num < 10 THEN NULL ELSE AVG( close) OVER (ORDER BY trade_date ROWS between 9 preceding and current row) END AVG_10,
comment this statement:
CASE WHEN line_num < 10 THEN NULL ELSE avg( close) OVER (ORDER BY trade_date ROWS 10 preceding) END avg_10,
I still get the same error
Thnx
Dan -
'lag' works in normal SQL statement, but not when in a view (resolved)
hi,
got a problem when using 'lag' in a view.
if i set up a select statement using 'lag' and execute it, all the results are correct.
when i stick the exact same select into a view, then the results for the 'lag' entries are not correct any more.
has anyone experienced this ?
any hints would be good.
thanks
Martin
using Oracle 10g Express
version 10.2.0.1.0
can not download the patch because i can not log into metalink - no CSI
setting to resolved.
Message was edited by:
user614086Hi again,
I think the problem is more with your expectation of what LAG should be doing than with LAG itself.
LAG must calculate based on the result set, in your stand alone query that means what's left after the WHERE clause is applied.
In the view that means across all rows the view produces. THEN you apply the where clause to the calculated values. You can see this in the example below.
So what you'd need to do is define this view in a manner in which the WHERE clause won't make a difference to the logical window produced.
That would mean using some columns in the partition by clause and order by clause, or leaving the lag function outside the view.
create table test_lag (column1 number, column2 varchar2(10), column3 date);
insert into test_lag values (1, 'ONE', trunc(sysdate,'DD') - 1);
insert into test_lag values (2, 'TWO' trunc(sysdate,'DD') );
insert into test_lag values (3, 'THREE', trunc(sysdate,'DD') + 1);
insert into test_lag values (4, 'FOUR', trunc(sysdate,'DD') + 2);
commit;
create or replace view test_lag_v
as
select column1, column2, lag(column2, 1) over (order by column1 asc) AS laggery, lag(column1) over (order by column3 desc) as laggery_2
from test_lag;
ME_XE?select *
2 from test_lag_v
3 where column1 <> 3;
COLUMN1 COLUMN2 LAGGERY LAGGERY_2
4 FOUR THREE
1 ONE 3
2 rows selected.
Elapsed: 00:00:00.50
ME_XE?
ME_XE?select *
2 from test_lag_v;
COLUMN1 COLUMN2 LAGGERY LAGGERY_2
4 FOUR THREE
3 THREE ONE 4
1 ONE 3
3 rows selected.
Elapsed: 00:00:00.68 -
On IOS7, iMessage "waiting for activation" when I enter my Apple ID for iMessage, I receive a message "Could not sign in. Please check your network connection and try again" I am unable to get many text message because of this. What do I do?
If you're having trouble logging in to FaceTime or Messages, the following article may be useful:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Maybe you are looking for
-
I'm trying to get organized and I just added a bunch of books and pdfs to my itunes library. They were all added immediately to my ipad and iphone even though I did not want this. I added them to itunes using add to library and I have both devices se
-
Credit memo on billing posted to accounting
Hi... If I wanted created a credit memo on billing that already posted to accounting, do I need to cancel the billing first? This billing posted to acct on the previous closed fiscal year. Tq Henery
-
I tried BDAqua's method I was able to see my options to boot using the option key when starting up my computer but after selecting the options nothing happens after. HELPPP!!!!!
-
Hey guys and girls, I need some help. I can not submit my podcast! My feed validates, but here's the error message I receive: "Error parsing feed: Invalid XML: Error on line 1: The markup in the document preceding the root element must be well-formed
-
Users are having issues w/ the community page for pa.
It seems other users are having issues with accessing the community page for pa, as noted on URL: http://www.dslreports.com/forum/r22862991-Any-else-out-there-having-issues-w-the-community-page-4-pa Title/Location: DSLR (dslreports.com) Forums -> US