Enhancing performance of system

I am developing a CCP CAN based application. However I am running to performance difficulties (overflow)when only trying to read (multiread) a maximum of 30 frames every 10ms.
I am using queues to buffer the CAN data and processing it on a trigger (occurrence). The processing is quite intensive to decode the data however.
I have taken basic steps to enhance performance such as reducing processes in loops, reduce polling time in loops, etc.
How can I improve further and are there specific Windows settings I should consider to increase processor time for the LabVIEW application.

Hello Elmo,
Thank you for contacting National Instruments.
There are a number of causes that could lead to an overflow error. Please refer to the following knowledge bases concerning NI-CAN queues.
http://digital.ni.com/public.nsf/websearch/FB1B03046CE09C53862568FE0052EAFB?OpenDocument
http://digital.natinst.com/public.nsf/websearch/CC36BA1DD421EC23862569060054F6E2
Some ways around the overflow error are to increase buffer size, decrease scan rate, or get a faster processor. Your buffer size should be 2 - 4 times bigger than your scan rate.
I hope this helps.
Sean C.
Applications Engineer
National Instruments

Similar Messages

Windows Vista/Service Pack 2-after performing a System Recovery my Hard Drive is full.

     I would like to thank you in advance for your patience. I am new to this forum solution method. I will do my best to explain what is happening with my computer without too much unnecessary information.
     My laptop is 2 yrs old and it all these error messages started popping up repeatedly. Windows Defender wouldn't open, system info errors, I/E crashes and so on. After numerous attempts to fix it myself, I asked Microsoft support for the solution.     M/S Tech Support instructed me to perform a System Recovery, through the startup/F-11 method and so I did. I followed all of M/S instructions and to skip the step for making a set of Backup disks, as well as the Recovery Manager's steps to complete the recovery. After all was done I noticed that all my personal files, (pic's, music, etc...), were gone and that my Hard Drive is out of space. I did a Disk Cleanup and defrag on both the C: and D: drives hoping that it would solve my problem. NOT!!! I have been looking through all the "Trouble shooting" support topics on both MS and HP. I have been afraid of doing any of the MANY suggested steps for fear of causing more damage.  The computer, except for the D: drive delima and Windows Defender not opening, seems to function properly, so I look at that as the real blessing in all this.
     Please help me by telling me that there is a way to fix the Hard drive and get Windows Defender to respond. Most importantly, how to go about getting it done. I just don't know how or why this happened.
     Thank you so much for your help. Nice to know that there are web sites and forums like these to go to for help. I look I look forward to your response.

This excerpt taken from HP manual for your computer.
On some models, you can perform a recovery from the partition on the hard drive from either the Start
button or f11. This restores the computer to it's factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
● Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
● Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed
on the screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions
Does this sound like what you did?
Oh yeah, Your D:\ drive is your Recovery partition and you should never mess with it.
It contains all the information to restore your computer to factory condition.

Report fetched by windows OS report "Performance by System"

When we fetch the report from the reporting pane in "Windows server operating server reporting" (Performance by System), sometimes the data shown in the column form comes in the yellow and red color (which shows warning and critical respectively).
My question is the threshold for these performance rules are mentioned in those perfmon collection rule or the rules from which the alert gets generated.
Appreciate your help.

The threshold of these performance rules, click on the alert and display details then show threshold of this alerts.
For more details, you can refer below link
http://technet.microsoft.com/en-us/library/hh457556.aspx
http://technet.microsoft.com/en-us/library/cc180267.aspx
http://download.doubletake.com/_download/dt53/docs/RecoverNow/User%27s%20Guide/Content/SCOM.htm
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Employee Performance Management System on SharePoint 2013

How can I create a simple Employee Performance Management System on SharePoint 2013?

Hi AnTiiika,
You question is a very open ended one, there are too many features that you have consider, without knowing your requirement it would be hard to answer.
you can consider the following OOTB features of SharePoint to start with-
Use SharePoint enterprise features -
http://technet.microsoft.com/en-us/sharepoint/fp142374.aspx
SharePoint BI -
http://technet.microsoft.com/en-us/library/jj542395(v=office.15).aspx
http://technet.microsoft.com/en-us/sharepoint/fp142398.aspx
http://office.microsoft.com/en-us/sharepoint-help/create-and-use-a-report-or-a-scorecard-HA102772329.aspx
Lists to store and manage data
External content type if you want to access data from outside SharePoint like SQL Server or other external datastore
http://msdn.microsoft.com/en-us/library/office/jj163139(v=office.15).aspx
Excel services
http://office.microsoft.com/en-us/sharepoint-server-help/business-intelligence-in-excel-and-excel-services-sharepoint-server-2013-HA102915300.aspx?CTT=5&origin=HA102772329
PerformancePoint
http://technet.microsoft.com/en-us/library/jj571736(v=office.15)
Reporting services
http://technet.microsoft.com/library/bb522712.aspx
for code approach -
http://msdn.microsoft.com/en-us/office/dn448478.aspx
http://sharepointdemobuilds.codeplex.com/
http://msdn.microsoft.com/en-us/library/office/jj163140(v=office.15).aspx
you can also consider new App model and develop apps using CSOM/JSOM/REST API for list based CRUD operations or for dashboards-
http://code.msdn.microsoft.com/office/SharePoint-2013-Create-a-20a03d84
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Declarative workflows cannot automatically start if the triggering action was performed by System Account

Hi ,
I have very strange problem .Only in one site collection across the farm i am getting this error while starting OOTB workflow in list. Everywhere else it works, even another site collection within same web application. I have stopped and restarted all the
work flow feature but still same issue?
sachin

Errors in ULS logs
Declarative workflows cannot automatically start if the triggering action was performed by System Account. Canceling workflow auto-start. List Id: %s, Item Id: %d, Workflow Association
Id: %s
RunWorkflow: Microsoft.SharePoint.SPException: User cannot be found.
at Microsoft.SharePoint.SPUserCollection.get_Item(String loginName)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.LoadWorkflowBytesElevated(SPFile file, Int32 fileVer, Int32& userid, DateTime& lastModified)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.LoadWorkflowBytesElevated(SPWeb web, Guid docLibID, Int32 fileID, Int32 fileVer, Int32& userid, DateTime&
lastModified)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.<>c__DisplayClass1.<LoadWorkflowBytes>b__0(SPSite elevatedSite, SPWeb elevatedWeb)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.LoadWorkflowBytes(SPWeb web, Guid docLibID, Int32 fileID, Int32 fileVer, Int32& userid)
at Microsoft.SharePoint.Workflow.SPNoCodeXomlCompiler.LoadXomlAssembly(SPWorkflowAssociation association, SPWeb web)
at Microsoft.SharePoint.Workflow.SPWinOeHostServices.LoadDeclarativeAssembly(SPWorkflowAssociation association)
at Microsoft.SharePoint.Workflow.SPWinOeHostServices.CreateInstance(SPWorkflow workflow)
at Microsoft.SharePoint.Workflow.SPWinOeEngine.RunWorkflow(SPWorkflowHostService host, SPWorkflow workflow, Collection`1 events, TimeSpan timeOut)
at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflowElev(SPWorkflow workflow, Collection`1 events, SPWorkflowRunOptionsInternal runOptions)
Microsoft.SharePoint.SPException: User cannot be found.
at Microsoft.SharePoint.SPUserCollection.get_Item(String loginName)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.LoadWorkflowBytesElevated(SPFile file, Int32 fileVer, Int32& userid, DateTime& lastModified)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.LoadWorkflowBytesElevated(SPWeb web, Guid docLibID, Int32 fileID, Int32 fileVer, Int32& userid, DateTime&
lastModified)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.<>c__DisplayClass1.<LoadWorkflowBytes>b__0(SPSite elevatedSite, SPWeb elevatedWeb)
at Microsoft.SharePoint.Workflow.SPWorkflowNoCodeSupport.LoadWorkflowBytes(SPWeb web, Guid docLibID, Int32 fileID, Int32 fileVer, Int32& userid)
at Microsoft.SharePoint.Workflow.SPNoCodeXomlCompiler.LoadXomlAssembly(SPWorkflowAssociation association, SPWeb web)
at Microsoft.SharePoint.Workflow.SPWinOeHostServices.LoadDeclarativeAssembly(SPWorkflowAssociation association)
at Microsoft.SharePoint.Workflow.SPWinOeHostServices.CreateInstance(SPWorkflow workflow)
at Microsoft.SharePoint.Workflow.SPWinOeEngine.RunWorkflow(SPWorkflowHostService host, SPWorkflow workflow, Collection`1 events, TimeSpan timeOut)
at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflowElev(SPWorkflow workflow, Collection`1 events, SPWorkflowRunOptionsInternal runOptions)
The emailenable value is true. And it just does not work for one site collection. It should not be regarding any hot fix.
Thank you for your suggestions and time. I will dig up further.
sachin

How do I perform a system restore in Windows 10?

QuestionHow do I perform a system restore in Windows 10?
AnswerNote: This article is about Windows 10. Separate articles are available on performing system restore in Windows 8 and Windows 7.
System restore rolls your system files back to a restore point from a previous date. You can make restore points manually, but Windows will also make them automatically. This will undo system settings, changes from Windows Update, and changes from newly installed software (including removing software installed since that restore point).
Your data, documents, and most programs won't be changed. This makes system restore a great place to start when you're having a problem and don't know how to fix it.
System restore reverts drivers installed since the restore point was created. Programs and apps installed since the restore point was created will also need to be reinstalled.
To view other recovery options in Windows 10, read this article:
What recovery options are available in Windows 10?
To perform a system restore, follow these steps:
Open the Start Menu and select Settings.
Select Update & security and then Recovery.
Under Advanced startup, select Restart now.
After the computer restarts to a screen with various options, select Troubleshoot.
Select Advanced options and then System Restore.
When you reach an account selection screen, select an account.
Enter your password and select Continue.
Follow the prompts, choosing your desired restore point. (You'll most likely want to use the most recent restore point from before the problem started).
You can also watch this video to learn how to perform a system restore:

If you want to create an image of the entire disk, then `dd' is an option. But you can also use ufsdump to create an image of a filesystem running on that disk, but you need to do that for every filesystem on the disk and please keep a copy of you vtoc for the future if you need to restore everything.
On the other hand you make me thing about someone who wants to clone machines and then a Flash Archive can also be an option. Please keep in mind to ask the question in the future instead of conformation of your answer ;-)

Assigning buttons on Lenovo USB Enhanced Performance Keyboard

I have recently made Mozilla Firefox my default browser (it's much quicker to start up than Explorer), however I would still like the Internet button on my USB Enhanced Performance Keyboard to open Explorer, which my son prefers (it currently opens Firefox). When I try to reconfigure the button I can't find Internet Explorer amongst the choices I am given.
I have reconfigured the Lock desktop button to open Firefox. I am sure I had the keyboard set up to do what I want it to do before I reformatted the hard drive yesterday.

I'm glad to report that I've been using this new driver for a month now with no issues...

Precautions for performing a system copy

Respected Guru's
I have to perform a system copy, should i reconfigure STMS after the copy.
Should i follow any precautions before performing a system copy in
STMS.
Thanks and Regards,
Dayanandan.

Hi,
As such there is no precautions related to STMS but yes after system copy you need to reconfigure your STMS.
Thanks
Sunny

Why the latest versions of Firefox do not allow me to work with Oracle Enterprise Performance Management System?

I use the software Oracle Performance Management System (it is a platform web based pretty common in the finance dpts) for work and is impossible for me to log in using recent versions of firefox.
Every time I get an autoupdate I have to uninstall it and install the version 3.5.7.......... pretty frustrating.
If you can help me otherwise i will be constrained to change browser.

If you are going to install an older version of Firefox 3.5.*, it would be best to try 3.5.13 which is the latest 3.5 version of Firefox and has the latest security fixes. This is available from http://www.mozilla.com/en-US/firefox/all-older.html
Also see [[installing a previous version of Firefox]], which includes details of how to install any previous version of Firefox.

Performance Management system

Hi,
In Performance Management system I want to send appraisal documents to atleast 10 people.In *appcreate* transaction code i could able to send for 1 employee but i want to send more than one employee
Please let me know the configuration path or any other details.
Regards,
Subramanian.

Dear Subramanian,
In the 'Old' appraisal (so using APPCREATE) system it worked that way:
If you want to appraise a group of employees in total then you can use the functionality of multisource appraisals (that will create one document with multiple appraisee)
If you want to appraise each employee individually then you have to do an appraisal for each employee.
An appraisal normally is very personal and individual, so there is no transaction creating appraisals as mass data.
Normally an appraisal is done between an employee and his manager. So for every employee an appraisal form is created by the manager.
Now with the new 'Objective settings and appraisal', you can create several documents (for a selection of employees) at the same time using transaction PHAP_PREPARE (but this is not availablewith the od system).
Hope this help
Best regards
Sarah

Keyboard - Enhanced Performance vs Preferred Pro - reliability, tactility, etc.

I'm comparing...
73P2620 Lenovo Enhanced Performance USB Keyboard - US English 39.00
73P5220 Lenovo Preferred Pro USB Keyboard - US English 29.00
I don't need the extra USB hub capability, so judging from the specs, I would choose the Preferred Pro model. However, can anyone having experience using either of them, chime in and comment on everything else that matters - reliability, tactility and feel, lags, joy of using, etc?
Thank you.
~Paul
Lenovo ThinkPad T410s - 2901CTO
IBM ThinkPad T41p - 2373GGU
Solved!
Go to Solution.

apart from the extra features, the feel and tactility of the two keyboard are the same.
The keyboards are okay, but the feel and tactility is not the industry best, reliability is okay they are quite reliable. I rather prefer the Microsoft keyboards.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Deploying USB Enhanced Performance [Wired] Keyboard settings

Hi. Is there any way to deploy the settings of the USB Enhanced Performance Keyboard settings so that all computers with the keyboard get the default settigs? Got 500+ computers to deploy.
Solved!
Go to Solution.

Hi,
there is no easy solution however this might be worth trying sincle I see it as feasible and maybe you can even use Migration Assistant if you do not have any other tool (I'm not expert on Migration Assistant).
1. Manually export the registry settings from the current user.
2. Change “HKEY_CURRENT_USER” to “HKEY_LOCAL_MACHINE”, in the exported registry file.
3. Remove any reference to “\users\username”.
4. Then, import the you modified registry file to another machine.
SEE ATTACHAED FILE PLS.
Let me know if this is sufficient and it helps.
Jan Solar
Product Marketing
(not a technical support)
http://blog.lenovo.com/author/jsolar/
Attachments:
reg_settings.png ‏223 KB

Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Hi Experts,
We are getting blank Performance reports after upgrading to SCOM 2012 R2. Can anyone provide fix for this issue?
All the reports are working fine except Performance by system and utilization report.
Thanks in advance.
Regards
Karthick Malayalan

Hi Karthick,
Here are two links for your reference regarding to the blank report issue:
SCOM 2012 performance by system report and perform by utilization
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
Empty?
http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
Yan Li
Regards, Yan Li

Hi guys, can you please explain how to perform automatic system scan with CleanApp - it looks like it wants me to manually chose files to delete and I just want an automatic scan (like cleanmymac does)

Hi guys, can you please explain how to perform automatic system scan with CleanApp - it looks like it wants me to manually chose files to delete and I just want an automatic scan (like cleanmymac does)

Slowness...First Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions. No need to report Permissions errors....we all get them.
Here's Freeing up Disk Space.
DALE

My iPhone froze while performing a system software download. How do I unfreeze it?

My iPhone froze while performing a system software download. How do I unfreeze it?

Hello ,
Thanks for using Apple Support Communities.
First, try to reset your iPhone:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists, you will need to restore your iPhone by following the steps in the article below:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Take care,
Alex H.

Enhancing performance of system

Similar Messages

Maybe you are looking for