Enque/table_size - Changing the parameter value

Hi folks,
I'm fairly new to SAP so was hoping for a bit of guidance with this matter.
I need to increase the parameter value for "enque/table_size".  It's currently set to the default 4096kb and we're seeing a lot of lock table overflow errors.
As the default value with Kernel 7.01 is 32MB, this seems like a good place to kick off.
I've gone into RZ11 and entered the parameter name.
Presumably, I select "CurrentValue" and Edit > Change Value?
Because Change Value is greyed out.
I have SAP_All in terms of authority. 
So I'm a bit puzzlied!
Any help would be appreciated.
Thanks

It seems your profile is not activated properly .
First search for the value of the parameter in RZ11 or TU02 , If the value of the parameter is old proceed as either of the follows
1 ) Go to /sapmnt/<SID>/profile ,  open the DEFAULT.PFL in an editor and add the entries . Bounce the system and check whetehr the entry appears in theRZ10 ( DEFAULT.PFL ) , since enqueue might be configured only in CI you can also do it in the instance profile
2 ) Second option is to go to RZ10 , Open Default or instance profile ( Extended Maintainance ) , create the parametes ,Copy . Save . Activate the profile . Check version of the profile . Bounce the system and check again . This step is recommended
Thanks ,
Manu
SAP Basis

Similar Messages

  • Unable to change the parameter value in the configtool

    Hi All,
    Error
    In the Configtool I have changed the custom value to u2018TRUEu2019 of the key u201Cume.superadmin.activatedu201D under Cluster-data -> instance -> server -> services -> com.sap.security.caore.ume.service. Now I am trying to change the value again to u2018FALSEu2019 but the value is not getting updated even after the server is restarted OS level. Please advise.
    System details:
    SAP: PI 7.0
    DB:   MS SQL 2000
    OS:   Windows 2003 server
    Thanks in advance.
    Regards,
    Dinesh

    Hi Dinesh,
    There are a variety of reasons why this is not getting reflected :
    1) When you make changes if you use an AS ABAP or LDAP directory as the data source. The default values of the UME properties assume the database of the AS Java as the data source. This requires you to reconfigure the data source before you can restart the AS Java.
    2) The cluster nodes have not been restarted after the changes
    3) Changes apart from global configuration have also been made elsewhere.
    4)properties as described in Editing UME Properties.
    Editing UME Setting:
    a) Start the Config Tool by executing
    \j2
    ee\configtool\configtool.bat.
    b) In the tree, navigate to Global server
    configuration services com.sap.security.core.ume.
    service.
    The list of UME properties appears.
    Regards
    joel
    Edited by: joel trinidade on Apr 15, 2009 12:29 PM

  • How to change timeout parameter value in Oracle 10g R2

    Anyone knows how to change timeout parameter value in Oracle 10g Database R2?

    Waheed Azhar wrote:
    actually i am getting ORA-01013 exception which directly relates to the timeout value but i think it's hidden parameter...What makes you think it's a hidden parameter?
    A search of MetaLink for that error turns up a number of hits, most of which a very situational specific. Exactly what are you doing when you get this error? Are you connecting over an ODBC connection? Are you getting it on a connection request? At db shutdown? During a long-running query?

  • Change the Parameter as Select option

    Hi Guy's,
    Please help me friends, present requirement is like this : change the Parameter into Select-Option.
    Here they are using one function module, this function module import parameter taking single value, how  loop this function module with in this select-option.
    PARAMETERS p_fictr LIKE fmfctr-fictr.
    START-OF-SELECTION.
    Move the select options to internal tables (import parameter for fn)
      move_sel_option  : sel_buk   s_bukrs ,
                         sel_pern  s_pernr ,
                         sreinr    s_reinr ,
                         spdatv    s_pdatv ,
                         sberei    s_berei .
    Call the function to get all trips corresponding to sel criteria
      CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
        EXPORTING
          p_fictr = p_fictr
          p_sub   = p_sub
        TABLES
          s_bukrs = s_bukrs
          s_pernr = s_pernr
          s_reinr = s_reinr
          s_pdatv = s_pdatv
          s_berei = s_berei
          i_trip  = i_trip
        EXCEPTIONS
          OTHERS  = 1.
    Thanks and Regards,
    Sai

    hi,
      You can first the field values using the select statement and then loop that internal table and pass the values to the function module.
    try this
    *PARAMETERS p_fictr LIKE fmfctr-fictr.
    select-options: s_fictr for fmfctr-fictr.
    START-OF-SELECTION.
    Move the select options to internal tables (import parameter for fn)
    move_sel_option : sel_buk s_bukrs ,
    sel_pern s_pernr ,
    sreinr s_reinr ,
    spdatv s_pdatv ,
    sberei s_berei .
    select fictr
       from fmfctr
       into tabel itab
    where fictr in s_fictr.
    loop at itab.
    Call the function to get all trips corresponding to sel criteria
    CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
    EXPORTING
    *p_fictr = p_fictr
    p_fictr = itab-fictr
    p_sub = p_sub
    TABLES
    s_bukrs = s_bukrs
    s_pernr = s_pernr
    s_reinr = s_reinr
    s_pdatv = s_pdatv
    s_berei = s_berei
    i_trip = i_trip
    EXCEPTIONS
    OTHERS = 1.
    endloop.
    regards,
    Veeresh

  • Procedure to change the standard value key of a work center

    Hi Gurus,
    What is the procedure to change the standard value key of a work center.
    Thanks in advance,
    Regards,
    PPQMUSER

    Hi,
    Just go to CR02 and change std value key, system will give you an information massage 'Standard value key : parameter XXXX after changed' as per the parameters used in new std value key.
    If you want to change the customization for allready used STD value key, then you need dealocate that key from workcenter, and then change the customization.
    Tara
    Edited by: tara  bhapkar on Feb 29, 2012 7:39 AM

  • Error in InfoView "The Parameter Value is not Valid"

    Hello,
    I have developed a Crystal Report in CR2008 and uploaded in the InfoView. Now when i run the report via scheduling or load the report with the data and try to change the parameter (editable set in CR) from the drop down list and hit apply i get an error dialogue box "The parameter value is not valid" and message says "null".
    Also another issue is that i cannot execute the report directly in InfoVIew, i have to schedule it to run the report. Report is connected to the SAP InfoSet.
    Any input would be much appreciated.
    Thanks.

    We have rebuild new servers for InfoVIew and it just works fine. Both the problem solved.

  • Unable to capture the parameter values from a PL/SQL procedure

    hi.
    i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
    Please help me regarding.
    i'm using following block for calling the procedure.
    declare
    err_cd varchar2(1000);
    err_txt VARCHAR2(5000);
    no_of_recs number;
    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
    cntr_var number:=0;
    begin
         rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
         dbms_output.put_line('The error is ' ||err_cd);
         dbms_output.put_line('The error is ' ||err_txt);
         dbms_output.put_line('The cntr is ' ||cntr_var);
         for incr in 1 .. OUT_SIGN_TAB.count
         loop
         cntr_var := cntr_var + 1 ;
    Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
    end loop;
    end;
    Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
    Following is some related information.
    the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
    TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
    TYPE "SEARCH_SIGN_TYPE" AS OBJECT
    (ref_no VARCHAR2(22),
    ciref_no VARCHAR2(352),
    ac_no VARCHAR2(22),
    txn_type VARCHAR2(301),
    objid VARCHAR2(1024))............

    We don't have your rt843pq procedure, but when commenting that line out, everything works:
    SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
      2  (ref_no VARCHAR2(22),
      3  ciref_no VARCHAR2(352),
      4  ac_no VARCHAR2(22),
      5  txn_type VARCHAR2(301),
      6  objid VARCHAR2(1024))
      7  /
    Type is aangemaakt.
    SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
      2  /
    Type is aangemaakt.
    SQL> declare
      2    err_cd varchar2(1000);
      3    err_txt VARCHAR2(5000);
      4    no_of_recs number;
      5    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
      6    cntr_var number:=0;
      7  begin
      8    -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
      9    dbms_output.put_line('The error is ' ||err_cd);
    10    dbms_output.put_line('The error is ' ||err_txt);
    11    dbms_output.put_line('The cntr is ' ||cntr_var);
    12    for incr in 1 .. OUT_SIGN_TAB.count
    13    loop
    14      cntr_var := cntr_var + 1 ;
    15      Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
    TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
    16    end loop;
    17  end;
    18  /
    The error is
    The error is
    The cntr is 0
    PL/SQL-procedure is geslaagd.Regards,
    Rob.

  • How to change the profile value in the pl/sql code without making change in the database

    How to change the profile value in the pl/sql code without making change in the database.

    I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
    if these Profiles are set for the user running this program automatic printing should not be done.

  • How can I change the initial value of the field approve_or_reject?

    Hello Workflow Gurus
    We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
    We are using the SAP Standard Workflow WS14500015.
    I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
    approve_or_reject EQ 0 i.e. Approve
    approve_or_reject EQ 1 i.e. Reject
    Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
    Kindly help me and let me know the procedure to change this.
    PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
    Thanks and regards
    Ankur Goyal
    09823448654

    Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
    Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
    PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
    CHANGES INTO STANDARD SAP WORKFLOW ???
    Modifying the standard workflow is not recommended.....

  • How can I change the default value of a command ?

    I want to be able to change the default value of a comand when the vi
    is running. (I know how to do that with a right click when the vi is
    not running).
    In fact I would like the user of the vi to be able to choose a new default value for a command.
    How can I do that ?

    You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
    Try to take over the world!

  • Is it possible to change the display value of a domain-based attribute?

    Hello,
    I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity.  However, I cannot find a way to display anything but the code value in the drop-down (see below).
    Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
    Thanks in advance!
    Ben Lezin

    1. In the explorer page, settings dialog, you can change the display format to show only name.
    2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
    a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
    b. Make a Business Rule to update Name when HierarchyName is changed.

  • How to change the variable value in fox formula?

    Hi All,
        Please help me achieve this scenario,
             in the variable selection screen , i wil give some i/p like, calyear(0calyear) = 2008.
          In planing function using FOX formula, i must be able change the variable value to 2009.
      Will it be possible to achieve this, can we change a variable value using FOX formula, if possible
    please let me knw how to achieve this.
    Thanks n Regards,
    Priya.

    Hi Priyadarshini,
    i dont know what is your requirement exactly.If you can give a better explanation of ur requirement we can help you. But to answer your question yes we can get new values for the variable in the planning function.
    for this you need to couple the planning function together with the planning filter in a planning sequence. This planning filter should have the variable that you wanted to change. In the WAD when you want to call this planning sequence there is an option to call variable screen. If you enable this, it will pop up the variable screen to get this value again.
    Guess this was helpful.
    Regards.
    Shafi.

  • How to change the characteristic value in a item of sales order by FM?

    Hi experts,
    I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
    Regrads

    Hi Birendra,
    Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
    type-pools: IBCO2,
                IBXX.
    data: l_CUOBJ type CUOBJ_VA,
          l_ibase type IBCO2_IBASE_REC,
          l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
          w_CONFIGURATION type IBCO2_INSTANCE_REC2,
          l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
    data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
          w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
    select single CUOBJ
      into l_CUOBJ
      from VBAP
      where VBELN = '0020030609'
        and POSNR = '000020'.
      CALL FUNCTION 'CUCB_GET_CONFIGURATION'
        EXPORTING
          INSTANCE                           = l_CUOBJ
        IS_BUSINESS_OBJECT                 =
        IV_MOMENT                          =
        IV_WITH_DB_INSTANCE                =
       IMPORTING
         IBASE                              = l_ibase
         CONFIGURATION                      = l_CONFIGURATION
        EO_CBASE_REF                       =
      EXCEPTIONS
        INVALID_INPUT                      = 1
        INVALID_INSTANCE                   = 2
        INSTANCE_IS_A_CLASSIFICATION       = 3
        OTHERS                             = 4
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    loop at l_CONFIGURATION into w_CONFIGURATION.
      l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
    t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
      read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
      w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
      modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
      modify l_CONFIGURATION from w_CONFIGURATION index 1.
      clear: w_CONFIGURATION.
    endloop.
    CALL FUNCTION 'CUCB_SET_CONFIGURATION'
      EXPORTING
        ROOT_INSTANCE                      = l_CUOBJ
      IS_CBASE_HEADER                    =
      CHANGING
        CONFIGURATION                      = l_CONFIGURATION
    EXCEPTIONS
      INVALID_INPUT                      = 1
      INVALID_INSTANCE                   = 2
      INSTANCE_IS_A_CLASSIFICATION       = 3
      OTHERS                             = 4
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
      EXPORTING
        ROOT_INSTANCE                       = l_CUOBJ
        ROOT_OBJECT                         = l_ROOT_OBJECT
      FORCE_NEW_INSTANCE                  =
      IV_WITHOUT_COMMIT_UPDATE            = ' '
      IV_MATERIAL                         =
      IV_LOCATION                         =
      IV_TECHS                            =
    IMPORTING
      NEW_INSTANCE                        =
    TABLES
      EXP_NEW_NESTED_CUOBJS               =
    EXCEPTIONS
      INVALID_INSTANCE                    = 1
      INVALID_ROOT_INSTANCE               = 2
      NO_CHANGES                          = 3
      ALREADY_REGISTERED_FOR_UPDATE       = 4
      INSTANCE_IS_A_CLASSIFICATION        = 5
      OTHERS                              = 6
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Fm to change the condition value in sales order pricing

    Hi Friends,
    I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
    Can someone please help me. I've been stuck with this for quite sometime.
    Thanks,
    Dikshitha G

    Try these BAPI's
    BAPI_LISTING_CONDITIONS,
    BAPI_AGREEMENTS
    Regards,
    Rajasekhar Reddy.

  • I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    Ntenich,
    If your table has a Header and your Legend text is in the header, it will be picked up by the table.
    Jerry

Maybe you are looking for