Material availability check not consider the MMBE stock correctly

Dear Experts,
Thanks for your continuous support.
I have one clarification ,at the time of process order raised COR1 - Click Material availability check after that massage had come in all material check available , but system wise some of the Bill of materials having not stock in MMBE ? What is the reason for the issue, with out stock material also given the status ok in ATP.
At the time of confirmation i have put some loss qty , where is the way of display in loss qty after that confirmation.
I need the report for one month process order confirmation list with order qty, confirm qty, delivered qty, &Loss qty ? Loss qty details only i am seeing kindly give the guidance if any t.code for display loss qty against the process order.
Thanks,
N.Umapathy

Hi N.Umapathy,
"Click Material availability check after that massage had come in all material check available , but system wise some of the Bill of materials having not stock in MMBE ? What is the reason for the issue, with out stock material also given the status ok in ATP."
There can be an available quantity even if there is no stock in MMBE for that material.
A simple example:
Production order created with component X.
Component X has a required quantity of 100.
There is no stock in MMBE for material X.
However, there is a planned receipt of stock (maybe in the form of a purchase document for example) of 100.
In this case, it is possible that the availability check will confirm 100 is available even if it is not in MMBE.
Another contributor on here, Jürgen L has written a very good blog on this here:
Unrestricted use stock not equal to available stock
Hope this helps.

Similar Messages

The system is not considering the free stock in planning strategy grp - 25

Dear Frndz,
The system is not considering the free stock of child items available in the system.For the parent item, I have maintained a planning srategy of 25 (Make to order variant config).My client would like the system to consider the free stock available for child items.pls help me...
Regards,
Srini

Dear,
Strategy 25 will not consider the existing stock.
What you enter in MRP4 view ind/collective rquirement is applicable only for dependent requirement.
Also refer this thread?
Re: Strategy group 20
Run MRP in MD50 and then MD02 with palnning mode 3 deleted and recreated and check your result.
Regards,
R.Brahmankar

Material availability check not being executed

First of all: I’m an SD consultant with limited knowledge about PS
At our current client are we facing an issue with the material availability check in project system orders, created through e.g. CJ20N. The client mentions, that the availability check on the components is not being executed and therefore is effecting their operations
I did check SAP OSS and found the following OSS notes:
01774744           Planning quantity of PIR is not getting updated properly
01745038           BAPI_NETWORK_COMP_CHANGE is updating PBED-PLNMG incorrectly
01774657           BAPI_NETWORK_COMP_CHANGE is not updating PBED-PLNMG –III
Those notes were also implemented
Did find transaction CJBN and did some testing, but did get the message
BL 001
Availability check not activated
I did check transaction
OPJJ and everything looks good.
OPJK and everything looks good
At this point I’m totally clueless on how to resolve the issue.
If you would have any suggestions, pointers or remarks: they would be appreciated.
Thanks and regards,
Jan Pel

Hi,
Can you please check whether the configuration of material availability check in PS is proper and in place or not. Please check the following sap help link on material's availability check in PS:
Material Availability Check - Material - SAP Library
Regards
Saurabh

Availability checking - How Avail check can see the Reservat linked to a SO

Hii there,
We have the following issue. When we create a Sales Order, we want to reserve the stock so that when another Sales Order for the same material is created, the standard Material Availability check will know the 1st SO has x amount of stock already reserved.
We are running the standard BAPI - BAPI_MATERIAL_AVAILABILITY and using the Availabilty checking rule assinged in the Material Master and the Scope of check from Transaction OPJJ, but we are not able to force the Avail Check to acknowledge the Reservation created for the Sales Order.
The standard Reservation check on the Scope of check is only for manually created Material Reservations but we are creating ours linked to a Sales Order (movement ype 231) and although you can see the Reservation in the RESB table, the Avail check does not take this reservation into consideration.
Any ideas would be greatly appreciated.
Thanks.
Owen

When we create a Sales Order, we want to reserve the stock
1) Go to material master and check what availability check is maintained. Most probably, it should have been 02
2) Next go to OVZ9, select the combination 02 => A and execute. There tick the box for "Include sales reqmts". and save
3) Now create a sale order and update the forum how it works
thanks
G. Lakshmipathi

Sales order availability check considering the ROH stock/procurement time

Hi Gurus,
Our client's Production process requires the availability check at order level to consider the procurement time required for the Rawmaterial (BOM component of the FERT, whose sales order is taken) in cases when this RM is not available in the plant, and Availability check should not consider this procurement time when this RM is available in the plant.
ie in first case, it should consider the total time for in-house production as well as the time required to procure the rawmaterials, along with all other times that we use like Gr processing time, packing picking etc.
In second case it should not consider the RM procurement time, but only the inhouse production time and other times as applicable.
To my understanding, Availability check at order level will only check the time given in the MRP view of the FERT, and it does not check anything about RM stock or RM procurement time.
Can you please give me some suggestions to meet this requirement of the client (client is into Food Product Manufacturing).
Your quick response will be very helpful
Thanks
Jobi

Jobi,
Our client is not following Assemble to order or even make to order. The typical production process followed is neither make to order nor make to stock.
Understood, although I am not sure why you are telling me what he has today; since your client has already told you his existing solution is unsatisfactory. I have described a solution that seems to meet the short list of business requirements that you described in your first post. I suggest you offer this solution to your client, unless he has already told you that ATO is not acceptable for some other reason not mentioned in your post.
As already mentioned by the other experts Saurabh and Kiran and Mariano, the requested functionality in general is not supported for MTS in standard ECC. As always, anything is possible through enhancement or 'workaround', as long as the client has enough time and money, and you have sufficient skills to implement.
If the client is willing to implement APO, which is the standard SAP advanced planning system, such a solution (multi-level availability checking with MTS) is possible as standard. Within the Global Available To Promise Module of APO there are a couple of ways to get at this type of ATP solution.
Best Regards,
DB49

Do not consider the stock onhand during SNP.

Hi APO specialists.
I'd like to run SNP plan that do not consider the stock onhand.
Material A is purchase item. and the forecast of material A has 400 qty.
and stock onhand is 200 qty.
But I want to make the purchase request as 400 qty.
How to ?
Anyone who has the solution can reply this question.
Thank you all.

Hi,
Try following in separate planning book by copying standard planning book.
In a macro for stock balance change the step for calculation of stock on hand projected. In this step remove the function of INITIAL_STOCK.
Regards,
Vaibhav
Edited by: Vaibhav Birwadkar on May 26, 2008 7:20 AM

Material Availability Check in Process Order Issue

Guys, I need some help in understanding the folowing issue:
I have a FG and 2 components.I created a process order and tried to release the order. Automatic availability check is done and a dailog box appeared to list out the missing parts. Missing parts list shows both the components. But one of the componet has unrestricted stock to use in the storage location. why did the availabity check show missing part for that component?
I checked pp checking rule and it says for business rule 2 "no check" is unchecked. so that means checking is done. and this pp checking rule is assigned in OPJJ and also assigne dto the material master of the component.
please let me know if you need more information. Thx

Dear you are absolutely correct if you uncheck No check box in material availability in Order control OPJK per plant and order type that no automatic material availability check is to be executed for the specified business transaction (order creation or order release).
But further please note that the option of calling up a material availibility check manually and also of executing a collective availability check is not affected by setting this indicator. This indicator is also ignored if you work with Assembly orders and you have defined in Customizing for Sales Orders that a material availability check is to be carried out.
Cheers
kK

Can system consider the unrestricted stock when planned with MD50???

Hi,
We have scinerio where FERT with Strategy 20 (MTO Process) is planned with MD50 against the sale oder. Every time Dependent items stock needs to be posted with Movement type 412E against that sale order or else dependent items stock though available in unrestricted is shown as unable against that sale order no. Enitre cost of the FERT material is accounted against sale order number.
Can we avoid posting of sales order stock?? can we make system to consider the unrestricted stock when planned with MD50.
Thanks in advance,
Regards,
John

if u want to consume the unrestricted stock, why u implemented MTO??
what was the requirement to implement MTO, when u r asking such question in support............
check first requirement of the client.......if u think they need to consume unresc stock...i will say...implentation was very poor,
regards,
Pravin M

Work Order Material Availability Check Customizing

Hi,
I am currently trying to set up material availability check in the work order before saving. I am testing it by entering a material in the work order for which there is zero stock. Then clicking on ORDER > FUNCTIONS > AVAILABILITY > CHECK STOCK MATERIAL. However SAP would return 'All checked materials in order 100000317 are available' in status bar.
My customizing is as follows:
Define Checking Rules (SPRO):
PM     Checking rule for plant maintenance
Define Scope of Check (OPJJ):
   Availability Check: 01 (Daily Requirements)
   Checking Rule: PM (Checking rule for plant maintenance)
   Availability check: 2 (Check availability during order release)
    Stocks
    Include safety stock: X
    StockIn Transfer: X
    Incl. quality insp. stock: X
    Replenishment lead time
    Check without RLT: X
    In/outward movement
    Incl. purchase orders: X
    Incl. purchase requisitions: X
    Incl. dependant reqs: X
    Include reservations: X
    Include sales reqmts: X
    Include deliveries: X
    Incl. planned orders: X (check all planned o)
    Incl. production orders: X (take all production)
Define Scope of Check (OIOI):
   Plant: (Corresponds to Work Order)
   Order Type: (Corresponds to Work Order)
   Check material availability when saving order: X
   Check rule: 02 (Corresponds to material being used)
   Release Material: 3 (No release if parts are missing)
   PRT Availability: No check
   Capacity Availability: No check
I would appreciate if you could indicate if I am missing something in the customizing or if there is some sort of error. I would like SAP to display a system message on the status bar stating that this material is not available once the user enters this material.
Regards,
Nikolai

I'am facing the almost the same problem. Could anyone tell me:
1. How to make material availability check work during Work Order creation?
My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
2. How to make information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
Thank you
-amoonra-

How to address missing parts during material availability check

The system prompts that a particular component is missing during material availability check of a production order. Said component is available in the system upon verification in MMBE.
We noted that the goods receipt date of the material is way beyond the requirement date, hence the system still prompts that it is missing.
What we did to correct this is to change the basic start date of the production order thus changing the requirement date of the material.
The resolution unfortunately, brought another problem, another planned order was generated, which consequently generated another purchase requisition.
What is the proper way of addressing the missing parts prompt during material availability check?

Hi
Not able to understand why you are using BAPI & function module.
It is a simple function of avaialbility check.
For this you have to fill the availability chk field in material amster of all components & givecheckinh rule inOPPQ .
After creation of process order, you can check COR2 it self.
It is a std functionality.
It should definitely work.
Regards
YMREDDY

CNS0 - Material availability check

Hi Experts,
Now, we have some problem for material availability check.
For example :
Stock : 10 pce
1. we create outbound delivery for 6 pce for Network / Activity : A / A000
2. we create outbound delivery for 4 pce for Network / Activity : B / B000
3. Now we create outbound delivery for 5 pce for Network / Activity : C / C000 , what we expected is there is an error message to tell us " only 0 PCE of material XX available " , but now, there is no message, outbound can be generate without any message.
Could you pls help me to know where might be problem ? where I should check ?
Best regards
Shubin

Hi Nitin,
thanks, but seems the problem is not here, I guess it is a material availability check issue.
BR , Shubin

Material Availability Check Upon Confirmation

Hello Everyone,
I had a question regarding Material Availability check.
Here My raw material and Semifinished Goods are Backflushed during confirmation. My client wants to check material availability check upon confirmation of production order. System should not allow Confirmation if no stock is available. Is there any way how I can do this?
I know we can perform material availability check upon release and prevent the same, but user does not accept this since change in production order is possible even after release.
Any suggestion would be greatly appreciated.
Sincerely,
Aji Kurian Mani

Hi,
you can configure this in the confirmation parametres --OPK4.In General individual entry tab Error handling/logs tabmake a tick for the Goods movements --Termination for the Incorrect Goods Movts.
Termination of Confirmation if Incorrect Goods Movements Controls if the confirmation is terminated in the event of incorrect goods movements
If these incorrect goods movements are determined by inventory management, then the option of correcting these errors is offered in the error handling
If the correction is not successful, the confirmation is terminated
Thanks,
Rajanikanth

Dynamic availability check not taking reservation accumulation into account

We have 2 production orders for which the availability check had been done and situation is
Finished good has 1 component and the Plant stock of the component is 99 EA.No other receipts are in place.
Order1 is for quantity of 100 EA
Order2(at a later date than order1) is 1 EA
Post availaility check using COHV, Order1 is confirmed for 99 EA and is with MACM status and order2 has no commitment and is with MSPT status.
Dynamic availability check for CO27 in OMCP config points to the same checking rule we used during the intial material availabillity check.
In the Movement type config 261 movement type is assigned to dynamic avl.check - F Message in any case: E mess. for non-avail., otherw. S mess.
When we execute CO27 individually for the orders we can trap the error as per availability check commitments as we have seen earlier.
But when we try to input both orders together in CO27 and do a pick list confirmation the second order gets the component issue with the first one not getting posted (expected to be partially to the tune of 99 EA) thereby violating the availability check results ultimately.
Request your help in knowing whether this is the SAP design or am i missing some thing else?

Query posted in the PP Forum and hence this is closed.

Longer time for Material Availability check while creation of prd order.

Hi guys,
I am facing a weird problem while creating production orders thru CO01.
I enter the component and plant and I am also using the forward scheduling option.
for some reason, SAP is taking a long time for material availability check when I hit the release button.
Sometimes its taking more than an hour. Its happening with few specific BOM's, and I have checked the master data but I could hardly find a problem in master data.
Can someone suggest me some tips ??
Thanks & Regards,
Sashivardhan

Hi,
Please check the Availability check control maintained for Components it should be 01 or 02. Also check the issue storage location maintained or not. You can maintain issue storage location in BOM in Status/lng text tab in Production Storage Location.
Hope this will help.
Regards,
Navin

Material availability check be switched off for during dispatching of order

Hi All,
Material availability u2013 can the material availability check be switched off during dispatching of production order but kept when order is created?
Is there any implications on availibilty check.
How can we do this?
Regards,
Vidyasagar

Dear
If you want to do Material Availablity Check only at the time of order creation , please choose Availability Check Business Function 1 with your order type /plant combination .Keep No Check in Capacity and do not assing the Overall Capacity Profile Here .
Where as keep the Capacity Overall Profile for Production Order Type with Availablity Check -2 and Mark No Check to material availablity option in the same .
In OPKP -make sure that you have Capacity Profile assinged and do not mark Confirm Partial Available Qty .
How ever , in capacity requirement , material availablity is the intregrated part and while dispathcing production order with in the available capacity of any operation in work centre , system tries to make sure the materials are available for processing just before actual operation starts .
Check in CM21-Setting-Strategy -Dispatch Control -Check if you have option to un-check the Material Availability .
Regards
JH

Material availability check not consider the MMBE stock correctly

Similar Messages

Maybe you are looking for