No Domain available after configuring SSO
Hi Guys,
We configured Oracle SSO with SOA Suite (BPEL, ESB..)
When I try to access BPELConsole after sso authentication , I get message that No Domain Available to this User.
I have checked that Domain default is available and Up but for some reason its not populated once user logs in
Any Pointer ?
Atul
http://onLineAppsDBA.com
jcourcoul wrote:
Was happily plugging away at my three-day-old N97 and decided to purchase the upgrade for the QuickOffice suite of apps that came preinstalled. Installed the new version, at the end of which the Installer requested a phone restart.
When it was starting up, a message stating "system error" popped up. Ever since, I cannot get into the Menu screen, since the same message appears, with an "Ok" item to press. The phone apperas to be working just fine and I can even get into apps by configuring one of the shortcuts in the Standby screen. After backing it up, tried uninstalling all the apps I had recently added, to no avail. In desperation, even reinstalled the firmware via the firmware updater module of the PC Suite, no avail!
What should I try to get it back to 100%?
Try a hard reset. If it doesn't work, take your phone to a Nokia Care Point.
Hard reset. Turn off the phone. Press and hold three keys together, the green key, the * key and the number '3'.Then, turn on the phone and don't let the three keys before you see the Nokia hands logo.
For 5800 XM hard reset need different keys. The green key, the red key and the camera button.The process is the same.
And, for N97 go to /discussions/board/message?board.id=smartphones&message.id=158831&query.id=591236#M158831
WARNING!Hard reset deletes all your phone's data!
If you want to thank someone, just click on the blue star at the bottom of their post
Similar Messages
-
Login problem after configuring SSO
Hi All,
After configuring SSO I am not able to login in PORTAL as J2EE_ADMIN User.After entering the password its again redirecting the same screen with any error.
Please help.
Thanks,
Prashant.
Edited by: Prashant Shukla on Mar 12, 2008 8:27 AMHi All,
After restarting the server In SAPMMC Java process sserver0 is not getting up its throwing an error with exit code -11113.
Details of developer trace-:
trc file: "D:\usr\sap\EC6\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
node name : ID13670550
pid : 5840
system name : EC6
system nr. : 01
started at : Mon Mar 17 11:33:25 2008
arguments :
arg[00] : D:\usr\sap\EC6\DVEBMGS01\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[02] : -DSAPINFO=EC6_01_server
arg[03] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=3479
arg[06] : -DSAPSYSTEM=01
arg[07] : -DSAPSYSTEMNAME=EC6
arg[08] : -DSAPMYNAME=sapserver1_EC6_01
arg[09] : -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 7132] Mon Mar 17 11:33:25 2008
[Thr 7132] *** WARNING => INFO: Unknown property [instance.box.number=EC6DVEBMGS01sapserver1] [jstartxx.c 841]
[Thr 7132] *** WARNING => INFO: Unknown property [instance.en.host=sapserver1] [jstartxx.c 841]
[Thr 7132] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 7132] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties]
-> ms host : sapserver1
-> ms port : 3900
-> OS libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Instance properties
-> ms host : sapserver1
-> ms port : 3900
-> os libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
[Thr 7132] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 7132] JLaunchRequestQueueInit: create pipe listener thread
[Thr 3180] JLaunchRequestFunc: Thread 3180 started as listener thread for np messages.
[Thr 2140] WaitSyncSemThread: Thread 2140 started as semaphore monitor thread.
[Thr 7132] NiInit3: NI already initialized; param 'maxHandles' ignored (1;402)
[Thr 7132] CPIC (version=700.2005.12.02)
[Thr 7132] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_16
[Thr 7132] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
JStartupIReadSection: read node properties [ID13670550]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_16
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> java vm version : 1.4.2_16-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50121
-> shutdown timeout : 120000
[Thr 7132] JLaunchISetDebugMode: set debug mode [no]
[Thr 7520] JLaunchIStartFunc: Thread 7520 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -XX:MaxPermSize=256M
-> arg[ 10]: -XX:PermSize=256M
-> arg[ 11]: -XX:NewSize=171M
-> arg[ 12]: -XX:MaxNewSize=171M
-> arg[ 13]: -XX:+DisableExplicitGC
-> arg[ 14]: -verbose:gc
-> arg[ 15]: -Xloggc:GC.log
-> arg[ 16]: -XX:+PrintGCDetails
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Dsun.io.useCanonCaches=false
-> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 21]: -XX:SurvivorRatio=2
-> arg[ 22]: -XX:TargetSurvivorRatio=90
-> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\EC6\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\EC6\DVEBMGS01\exe
-> arg[ 26]: -Djava.class.path=D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_16\jre\bin\server;C:\j2sdk1.4.2_16\jre\bin;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;D:\OraHome_1\bin;D:\OraHome_1\jre\1.4.2\bin\client;D:\OraHome_1\jre\1.4.2\bin;D:\oracle\product\10.1.0\Db_1\bin;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\SYS\exe\uc\NTI386
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -DLoadBalanceRestricted=no
-> arg[ 32]: -Djstartup.mode=JCONTROL
-> arg[ 33]: -Djstartup.ownProcessId=5840
-> arg[ 34]: -Djstartup.ownHardwareId=B0245063248
-> arg[ 35]: -Djstartup.whoami=server
-> arg[ 36]: -Djstartup.debuggable=no
-> arg[ 37]: -DSAPINFO=EC6_01_server
-> arg[ 38]: -DSAPSTART=1
-> arg[ 39]: -DCONNECT_PORT=3479
-> arg[ 40]: -DSAPSYSTEM=01
-> arg[ 41]: -DSAPSYSTEMNAME=EC6
-> arg[ 42]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 43]: -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
-> arg[ 44]: -DFRFC_FALLBACK=ON
-> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 46]: -DSAPSTARTUP=1
-> arg[ 47]: -DSAPSYSTEM=01
-> arg[ 48]: -DSAPSYSTEMNAME=EC6
-> arg[ 49]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 50]: -DSAPDBHOST=sapserver1
-> arg[ 51]: -Dj2ee.dbhost=sapserver1
Mon Mar 17 11:33:26 2008
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
[Thr 7520] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 4220] Mon Mar 17 11:33:28 2008
[Thr 4220] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 4220] Mon Mar 17 11:33:29 2008
[Thr 4220] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4220] JLaunchISetClusterId: set cluster id 13670550
[Thr 4220] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4220] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4696] Mon Mar 17 11:34:07 2008
[Thr 4696] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4696] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 4292] Mon Mar 17 11:34:08 2008
[Thr 4292] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4292] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "D:\usr\sap\EC6\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
node name : ID13670550
pid : 7852
system name : EC6
system nr. : 01
started at : Mon Mar 17 11:34:11 2008
arguments :
arg[00] : D:\usr\sap\EC6\DVEBMGS01\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[02] : -DSAPINFO=EC6_01_server
arg[03] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=3479
arg[06] : -DSAPSYSTEM=01
arg[07] : -DSAPSYSTEMNAME=EC6
arg[08] : -DSAPMYNAME=sapserver1_EC6_01
arg[09] : -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4868] Mon Mar 17 11:34:11 2008
[Thr 4868] *** WARNING => INFO: Unknown property [instance.box.number=EC6DVEBMGS01sapserver1] [jstartxx.c 841]
[Thr 4868] *** WARNING => INFO: Unknown property [instance.en.host=sapserver1] [jstartxx.c 841]
[Thr 4868] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 4868] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties]
-> ms host : sapserver1
-> ms port : 3900
-> OS libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Instance properties
-> ms host : sapserver1
-> ms port : 3900
-> os libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
[Thr 4868] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4868] JLaunchRequestQueueInit: create pipe listener thread
[Thr 6192] WaitSyncSemThread: Thread 6192 started as semaphore monitor thread.
[Thr 6632] JLaunchRequestFunc: Thread 6632 started as listener thread for np messages.
[Thr 4868] NiInit3: NI already initialized; param 'maxHandles' ignored (1;402)
[Thr 4868] CPIC (version=700.2005.12.02)
[Thr 4868] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_16
[Thr 4868] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
JStartupIReadSection: read node properties [ID13670550]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_16
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> java vm version : 1.4.2_16-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50121
-> shutdown timeout : 120000
[Thr 4868] JLaunchISetDebugMode: set debug mode [no]
[Thr 5632] JLaunchIStartFunc: Thread 5632 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -XX:MaxPermSize=256M
-> arg[ 10]: -XX:PermSize=256M
-> arg[ 11]: -XX:NewSize=171M
-> arg[ 12]: -XX:MaxNewSize=171M
-> arg[ 13]: -XX:+DisableExplicitGC
-> arg[ 14]: -verbose:gc
-> arg[ 15]: -Xloggc:GC.log
-> arg[ 16]: -XX:+PrintGCDetails
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Dsun.io.useCanonCaches=false
-> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 21]: -XX:SurvivorRatio=2
-> arg[ 22]: -XX:TargetSurvivorRatio=90
-> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\EC6\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\EC6\DVEBMGS01\exe
-> arg[ 26]: -Djava.class.path=D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_16\jre\bin\server;C:\j2sdk1.4.2_16\jre\bin;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;D:\OraHome_1\bin;D:\OraHome_1\jre\1.4.2\bin\client;D:\OraHome_1\jre\1.4.2\bin;D:\oracle\product\10.1.0\Db_1\bin;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\SYS\exe\uc\NTI386
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -DLoadBalanceRestricted=no
-> arg[ 32]: -Djstartup.mode=JCONTROL
-> arg[ 33]: -Djstartup.ownProcessId=7852
-> arg[ 34]: -Djstartup.ownHardwareId=B0245063248
-> arg[ 35]: -Djstartup.whoami=server
-> arg[ 36]: -Djstartup.debuggable=no
-> arg[ 37]: -DSAPINFO=EC6_01_server
-> arg[ 38]: -DSAPSTART=1
-> arg[ 39]: -DCONNECT_PORT=3479
-> arg[ 40]: -DSAPSYSTEM=01
-> arg[ 41]: -DSAPSYSTEMNAME=EC6
-> arg[ 42]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 43]: -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
-> arg[ 44]: -DFRFC_FALLBACK=ON
-> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 46]: -DSAPSTARTUP=1
-> arg[ 47]: -DSAPSYSTEM=01
-> arg[ 48]: -DSAPSYSTEMNAME=EC6
-> arg[ 49]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 50]: -DSAPDBHOST=sapserver1
-> arg[ 51]: -Dj2ee.dbhost=sapserver1
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
[Thr 5632] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 6052] Mon Mar 17 11:34:13 2008
[Thr 6052] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 6052] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 6052] JLaunchISetClusterId: set cluster id 13670550
[Thr 6052] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 6052] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 6040] Mon Mar 17 11:34:40 2008
[Thr 6040] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 6040] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 5440] Mon Mar 17 11:34:41 2008
[Thr 5440] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5440] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "D:\usr\sap\EC6\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
node name : ID13670550
pid : 6036
system name : EC6
system nr. : 01
started at : Mon Mar 17 11:34:41 2008
arguments :
arg[00] : D:\usr\sap\EC6\DVEBMGS01\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[02] : -DSAPINFO=EC6_01_server
arg[03] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=3479
arg[06] : -DSAPSYSTEM=01
arg[07] : -DSAPSYSTEMNAME=EC6
arg[08] : -DSAPMYNAME=sapserver1_EC6_01
arg[09] : -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 5572] Mon Mar 17 11:34:41 2008
[Thr 5572] *** WARNING => INFO: Unknown property [instance.box.number=EC6DVEBMGS01sapserver1] [jstartxx.c 841]
[Thr 5572] *** WARNING => INFO: Unknown property [instance.en.host=sapserver1] [jstartxx.c 841]
[Thr 5572] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 5572] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties]
-> ms host : sapserver1
-> ms port : 3900
-> OS libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Instance properties
-> ms host : sapserver1
-> ms port : 3900
-> os libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
[Thr 5572] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5572] JLaunchRequestQueueInit: create pipe listener thread
[Thr 6780] WaitSyncSemThread: Thread 6780 started as semaphore monitor thread.
[Thr 5824] JLaunchRequestFunc: Thread 5824 started as listener thread for np messages.
[Thr 5572] NiInit3: NI already initialized; param 'maxHandles' ignored (1;402)
[Thr 5572] CPIC (version=700.2005.12.02)
[Thr 5572] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_16
[Thr 5572] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
JStartupIReadSection: read node properties [ID13670550]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_16
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> java vm version : 1.4.2_16-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50121
-> shutdown timeout : 120000
[Thr 5572] JLaunchISetDebugMode: set debug mode [no]
[Thr 6056] JLaunchIStartFunc: Thread 6056 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -XX:MaxPermSize=256M
-> arg[ 10]: -XX:PermSize=256M
-> arg[ 11]: -XX:NewSize=171M
-> arg[ 12]: -XX:MaxNewSize=171M
-> arg[ 13]: -XX:+DisableExplicitGC
-> arg[ 14]: -verbose:gc
-> arg[ 15]: -Xloggc:GC.log
-> arg[ 16]: -XX:+PrintGCDetails
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Dsun.io.useCanonCaches=false
-> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 21]: -XX:SurvivorRatio=2
-> arg[ 22]: -XX:TargetSurvivorRatio=90
-> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\EC6\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\EC6\DVEBMGS01\exe
-> arg[ 26]: -Djava.class.path=D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_16\jre\bin\server;C:\j2sdk1.4.2_16\jre\bin;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;D:\OraHome_1\bin;D:\OraHome_1\jre\1.4.2\bin\client;D:\OraHome_1\jre\1.4.2\bin;D:\oracle\product\10.1.0\Db_1\bin;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\SYS\exe\uc\NTI386
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -DLoadBalanceRestricted=no
-> arg[ 32]: -Djstartup.mode=JCONTROL
-> arg[ 33]: -Djstartup.ownProcessId=6036
-> arg[ 34]: -Djstartup.ownHardwareId=B0245063248
-> arg[ 35]: -Djstartup.whoami=server
-> arg[ 36]: -Djstartup.debuggable=no
-> arg[ 37]: -DSAPINFO=EC6_01_server
-> arg[ 38]: -DSAPSTART=1
-> arg[ 39]: -DCONNECT_PORT=3479
-> arg[ 40]: -DSAPSYSTEM=01
-> arg[ 41]: -DSAPSYSTEMNAME=EC6
-> arg[ 42]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 43]: -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
-> arg[ 44]: -DFRFC_FALLBACK=ON
-> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 46]: -DSAPSTARTUP=1
-> arg[ 47]: -DSAPSYSTEM=01
-> arg[ 48]: -DSAPSYSTEMNAME=EC6
-> arg[ 49]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 50]: -DSAPDBHOST=sapserver1
-> arg[ 51]: -Dj2ee.dbhost=sapserver1
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
[Thr 6056] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 5680] Mon Mar 17 11:34:43 2008
[Thr 5680] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 5680] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 5680] JLaunchISetClusterId: set cluster id 13670550
[Thr 5680] Mon Mar 17 11:34:44 2008
[Thr 5680] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 5680] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3952] Mon Mar 17 11:35:11 2008
[Thr 3952] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 3952] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 352] Mon Mar 17 11:35:12 2008
[Thr 352] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 352] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "D:\usr\sap\EC6\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
node name : ID13670550
pid : 5564
system name : EC6
system nr. : 01
started at : Mon Mar 17 11:35:13 2008
arguments :
arg[00] : D:\usr\sap\EC6\DVEBMGS01\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[02] : -DSAPINFO=EC6_01_server
arg[03] : pf=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=3479
arg[06] : -DSAPSYSTEM=01
arg[07] : -DSAPSYSTEMNAME=EC6
arg[08] : -DSAPMYNAME=sapserver1_EC6_01
arg[09] : -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 7448] Mon Mar 17 11:35:13 2008
[Thr 7448] *** WARNING => INFO: Unknown property [instance.box.number=EC6DVEBMGS01sapserver1] [jstartxx.c 841]
[Thr 7448] *** WARNING => INFO: Unknown property [instance.en.host=sapserver1] [jstartxx.c 841]
[Thr 7448] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 7448] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties]
-> ms host : sapserver1
-> ms port : 3900
-> OS libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Instance properties
-> ms host : sapserver1
-> ms port : 3900
-> os libs : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID13670500 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID13670550 : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\instance.properties
[Thr 7448] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 7448] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4468] JLaunchRequestFunc: Thread 4468 started as listener thread for np messages.
[Thr 1984] WaitSyncSemThread: Thread 1984 started as semaphore monitor thread.
[Thr 7448] NiInit3: NI already initialized; param 'maxHandles' ignored (1;402)
[Thr 7448] CPIC (version=700.2005.12.02)
[Thr 7448] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_16
[Thr 7448] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
JStartupIReadSection: read node properties [ID13670550]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_16
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> java vm version : 1.4.2_16-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\EC6\DVEBMGS01\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50121
-> shutdown timeout : 120000
[Thr 7448] JLaunchISetDebugMode: set debug mode [no]
[Thr 4420] JLaunchIStartFunc: Thread 4420 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -XX:MaxPermSize=256M
-> arg[ 10]: -XX:PermSize=256M
-> arg[ 11]: -XX:NewSize=171M
-> arg[ 12]: -XX:MaxNewSize=171M
-> arg[ 13]: -XX:+DisableExplicitGC
-> arg[ 14]: -verbose:gc
-> arg[ 15]: -Xloggc:GC.log
-> arg[ 16]: -XX:+PrintGCDetails
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Dsun.io.useCanonCaches=false
-> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 21]: -XX:SurvivorRatio=2
-> arg[ 22]: -XX:TargetSurvivorRatio=90
-> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\EC6\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\EC6\DVEBMGS01\exe
-> arg[ 26]: -Djava.class.path=D:\usr\sap\EC6\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\EC6\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_16\jre\bin\server;C:\j2sdk1.4.2_16\jre\bin;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\DVEBMGS01\j2ee\os_libs;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;D:\OraHome_1\bin;D:\OraHome_1\jre\1.4.2\bin\client;D:\OraHome_1\jre\1.4.2\bin;D:\oracle\product\10.1.0\Db_1\bin;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;D:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_16\bin;D:\usr\sap\EC6\SYS\exe\uc\NTI386
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -DLoadBalanceRestricted=no
-> arg[ 32]: -Djstartup.mode=JCONTROL
-> arg[ 33]: -Djstartup.ownProcessId=5564
-> arg[ 34]: -Djstartup.ownHardwareId=B0245063248
-> arg[ 35]: -Djstartup.whoami=server
-> arg[ 36]: -Djstartup.debuggable=no
-> arg[ 37]: -DSAPINFO=EC6_01_server
-> arg[ 38]: -DSAPSTART=1
-> arg[ 39]: -DCONNECT_PORT=3479
-> arg[ 40]: -DSAPSYSTEM=01
-> arg[ 41]: -DSAPSYSTEMNAME=EC6
-> arg[ 42]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 43]: -DSAPPROFILE=D:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS01_sapserver1
-> arg[ 44]: -DFRFC_FALLBACK=ON
-> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 46]: -DSAPSTARTUP=1
-> arg[ 47]: -DSAPSYSTEM=01
-> arg[ 48]: -DSAPSYSTEMNAME=EC6
-> arg[ 49]: -DSAPMYNAME=sapserver1_EC6_01
-> arg[ 50]: -DSAPDBHOST=sapserver1
-> arg[ 51]: -Dj2ee.dbhost=sapserver1
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
[Thr 4420] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 7152] Mon Mar 17 11:35:15 2008
[Thr 7152] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 7152] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 7152] Mon Mar 17 11:35:16 2008
[Thr 7152] JLaunchISetClusterId: set cluster id 13670550
[Thr 7152] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 7152] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 6032] Mon Mar 17 11:35:42 2008
[Thr 6032] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 6032] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 6136] Mon Mar 17 11:35:43 2008
[Thr 6136] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 6136] JLaunchCloseProgram: good bye (exitcode = -11113)
Thanks
Prashant -
Access denied errors in domain logs after configuring Ldap and restricting access to users
Hi Experts,
I'm getting access denied errors in my domain logs , this log is written continiously ..Has any one encountered the same issue and fixed this?
####<Sep 2, 2014 2:30:07 PM EDT> <Error> <Default> <ftizsldmwapp001.ftdc.cummins.com> <AdminServer> <[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <096a131bdb6c126e:6cecae89:14834848020:-8000-0000000000009bc8> <1409682607304> <J2EE JMX-46335> <MBean attribute access denied.
MBean: EMDomain:EMTargetType=j2ee_application,name=em,type=EMIntegration,Application=em
Getter for attribute HostName
Detail: Access denied. Required roles: Admin, Operator, Monitor, executing subject: principals=[]
TIA,
-KarthikHi Experts,
I'm getting access denied errors in my domain logs , this log is written continiously ..Has any one encountered the same issue and fixed this?
####<Sep 2, 2014 2:30:07 PM EDT> <Error> <Default> <ftizsldmwapp001.ftdc.cummins.com> <AdminServer> <[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <096a131bdb6c126e:6cecae89:14834848020:-8000-0000000000009bc8> <1409682607304> <J2EE JMX-46335> <MBean attribute access denied.
MBean: EMDomain:EMTargetType=j2ee_application,name=em,type=EMIntegration,Application=em
Getter for attribute HostName
Detail: Access denied. Required roles: Admin, Operator, Monitor, executing subject: principals=[]
TIA,
-Karthik -
DIP can't contact OID after OIM domain extension and configuration
Hello,
After extending our domain for OIM, configuring and propagating the domain, we are having issues with DIP contacting OID.
When starting the managed server, wls_ods1, the following error is reported in the .out file:
<Error> <oracle.dip> <DIP-10013> <Exception
javax.naming.CommunicationException: simple bind failed: oid.company.com:3131 [Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target.
In Enterprise Manager the components Quartz Scheduler and MBeans as down, and under the DIP server properties, when testing the connection, we receive the following error: The connection test could not be performed.The test aborted with the message : Unable to locate the DIP Sync profile mbean - :oracle.idm.integration.sync.config:*:Unable to locate the DIP Sync profile mbean - :oracle.idm.integration.sync.config:*:
OID is running before attempting to start the managed server. The certs have not changed during this process.
Please help.
Thank you.Check the compatibility matrix. I don't believe you are supposed to run OIM and OID in the same domain.
Kerry -
How to configure sso with SSL step by step
Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1. How to configure OHS support SSL
2. How to Register SSO with SSL
3. Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1. Oracle AS 10g infrastructure installed (10.1.2)
2. OCA installed
Note:
1. “When you install Oracle infrastructure, please make sure you have select OCA.
2. How Certificate-Enabled Authentication Works:
a. The user tries to access a partner application.
b. The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c. The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l You must configure SSL on the computer where the single sign-on middle tier is running.
l You are configuring one-way SSL.
l You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1. Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2. In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3. Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4. Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5. Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6. Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7. Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8. Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9. Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1. Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
· HTTPMachine—the server host name
· HTTPPort—the server port number
· HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6. Reload the OracleAS console:
ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1. This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
-oracle_home_path $ORACLE_HOME
-config_mod_osso TRUE
-mod_osso_url https://myhost.mydomain.com:4443
2. Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1. Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2. Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance -
Multi-Domain LDAP UME configuration
Hello
We have EP 7.0 installed and want to connect the UME to our Corporate
LDAP (MSADS) as data source.
Our ADS is as follows:
domain.pt u2013 This is our top level domain. Here we have our main users.
Gs.domain.pt u2013 This is a child domain of ren.pt. Here are some special
users that cannot be moved to domain.pt level (because of this we have to
use multi-domain configuration)
According to some documents Step 2 of Note 762419 - Multi-Domain Logon
Using Microsoft Active Directory this configuration as to be done
according to a Multiple-Domain UME LDAP Configuration.
Following is is my configuration of LDAP access:
I have set the u201CUME LDAP Datau201D in Config Tool to point to
the u201CdataSourceConfiguration_ads_readonly_db_with_krb5_multipledomain.xmlu201D configuration file that has been previously change by me following previous documents. The xml is is the end of the message
Also in the u201CUME LDAP Datau201D (Directory Server) I have defined the following settings:
Server Name: dc01.domain.pt (This is the DC of domain.pt)
Server port: 389
User: j2ee-pp3 @domain.pt
Pass: ******* (ok on all configuration tests and authentication)
SSL: NO.
User Path: DC=domain,DC=pt
Group Path: DC=domain,DC=pt
Checked the u201CFlat User Group Hierarchyu201D.
Checked the u201CUse UME Unique id with unique LDAP Attributeu201D.
At u201CAdditional LDAP Propertiesu201D I have set the properties of
ume.ldap.unique_user_attribute(global) and
ume.ldap.unique_uacc_attribute(global) to userprincipalname. This was
done according to the Multi-Domain configuration.
Also ume.ldap.access.multidomain.enabled=true was set the property
sheet of the UME service. After this all checks are ok including in
User Administration in Portal.
Conclusion: We have no problem with SSO and search capabilities
at u201Cdomain.ptu201D level. All users of this domain are able to access the
portal with SSO.
Nevertheless no user from u201Cgs.domain.ptu201D is able to logon. Additionally,
using User Admninistration in Portal with option u201CAll Data Sourcesu201D
returns no results when searching for users from this child domain. It
seems the the configuration file does not recognize gs.domain.pt.
Is it possible that our xml file is incorrectly adapted? Is there any
missing or wrong configuration for multi-domain LDAP access? Please
advice.
Thanks in advance
dataSourceConfiguration_ads_readonly_db_with_krb5_multipledomain.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- $Id: //shared_tc/com.sapall.security/630_SP_COR/src/_deploy/dist/configuration/shared/dataSourceConfiguration_ads_readonly_db_with_krb5_multipledomain.xml#6 $ from $DateTime: 2004/08/20 09:55:24 $ ($Change: 17140 $) -->
<!DOCTYPE dataSources SYSTEM "dataSourceConfiguration.dtd">
<dataSources>
<dataSource id="PRIVATE_DATASOURCE"
className="com.sap.security.core.persistence.datasource.imp.DataBasePersistence"
isReadonly="false"
isPrimary="true">
<homeFor>
<principals>
<principal type="group"/>
<principal type="user"/>
<principal type="account"/>
<principal type="team"/>
<principal type="ROOT" />
<principal type="OOOO" />
</principals>
</homeFor>
<notHomeFor/>
<responsibleFor>
<principals>
<principal type="group"/>
<principal type="user"/>
<principal type="account"/>
<principal type="team"/>
<principal type="ROOT" />
<principal type="OOOO" />
</principals>
</responsibleFor>
<privateSection>
</privateSection>
</dataSource>
<dataSource id="CORP_LDAP"
className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
isReadonly="true"
isPrimary="true">
<homeFor/>
<responsibleFor>
<principal type="account">
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="j_user"/>
<attribute name="j_password"/>
<attribute name="userid"/>
<attribute name="logonalias"/>
</attributes>
</nameSpace>
</principal>
<principal type="user">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname" populateInitially="true"/>
<attribute name="displayname" populateInitially="true"/>
<attribute name="lastname" populateInitially="true"/>
<attribute name="fax"/>
<attribute name="email" populateInitially="true"/>
<attribute name="email"/>
<attribute name="title"/>
<attribute name="department"/>
<attribute name="description"/>
<attribute name="mobile"/>
<attribute name="telephone"/>
<attribute name="streetaddress"/>
<attribute name="uniquename" populateInitially="true"/>
<attribute name="krb5principalname"/>
<attribute name="kpnprefix"/>
<attribute name="dn"/>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
</attributes>
</nameSpace>
<nameSpace name="$usermapping$">
<attributes>
<attribute name="REFERENCE_SYSTEM_USER"/>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="group">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="displayname" populateInitially="true"/>
<attribute name="description" populateInitially="true"/>
<attribute name="uniquename"/>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE"/>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.bridge">
<attributes>
<attribute name="dn"/>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
</responsibleFor>
<attributeMapping>
<principals>
<principal type="account">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="domain_j_user">
<physicalAttribute name="samaccountname"/>
</attribute>
<attribute name="j_user">
<physicalAttribute name="userprincipalname"/>
<attribute name="logonalias">
<physicalAttribute name="userprincipalname"/>
</attribute>
<attribute name="j_password">
<physicalAttribute name="unicodepwd"/>
</attribute>
<attribute name="userid">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="user">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname">
<physicalAttribute name="givenname"/>
</attribute>
<attribute name="displayname">
<physicalAttribute name="displayname"/>
</attribute>
<attribute name="lastname">
<physicalAttribute name="sn"/>
</attribute>
<attribute name="fax">
<physicalAttribute name="facsimiletelephonenumber"/>
</attribute>
<attribute name="uniquename">
<physicalAttribute name="userprincipalname"/>
</attribute>
<attribute name="loginid">
<physicalAttribute name="null"/>
</attribute>
<attribute name="email">
<physicalAttribute name="mail"/>
</attribute>
<attribute name="mobile">
<physicalAttribute name="mobile"/>
</attribute>
<attribute name="telephone">
<physicalAttribute name="telephonenumber"/>
</attribute>
<attribute name="department">
<physicalAttribute name="ou"/>
</attribute>
<attribute name="description">
<physicalAttribute name="description"/>
</attribute>
<attribute name="streetaddress">
<physicalAttribute name="postaladdress"/>
</attribute>
<attribute name="pobox">
<physicalAttribute name="postofficebox"/>
</attribute>
<attribute name="krb5principalname">
<physicalAttribute name="userprincipalname"/>
</attribute>
<attribute name="kpnprefix">
<physicalAttribute name="samaccountname"/>
</attribute>
<attribute name="dn">
<physicalAttribute name="distinguishedname"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="$usermapping$">
<attributes>
<attribute name="REFERENCE_SYSTEM_USER">
<physicalAttribute name="sapusername"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="group">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="displayname">
<physicalAttribute name="displayname"/>
</attribute>
<attribute name="description">
<physicalAttribute name="description"/>
</attribute>
<attribute name="uniquename" populateInitially="true">
<physicalAttribute name="ou"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.usermanagement.relation">
<attributes>
<attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE">
<physicalAttribute name="null"/>
</attribute>
<attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
<nameSpace name="com.sap.security.core.bridge">
<attributes>
<attribute name="dn">
<physicalAttribute name="null"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
</principals>
</attributeMapping>
<privateSection>
<ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
<ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
<ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
<ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
<ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
<ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
<ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
<ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
<ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
<ume.ldap.access.objectclass.grup>organizationalUnit</ume.ldap.access.objectclass.grup>
<ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
<ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
<ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
<ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
<ume.ldap.access.naming_attribute.grup>ou</ume.ldap.access.naming_attribute.grup>
<ume.ldap.access.pwd.via.usercontext>true</ume.ldap.access.pwd.via.usercontext>
<ume.ldap.access.set_pwd>true</ume.ldap.access.set_pwd>
<ume.ldap.access.multidomain.enabled>true</ume.ldap.access.multidomain.enabled>
<ume.ldap.access.extended_search_size>200</ume.ldap.access.extended_search_size>
<ume.ldap.access.domain_mapping>
[DOMAIN_PT;DC=domain,DC=pt]
[GS_DOMAIN_PT;DC=gs,DC=domain,DC=pt]
[gs;DC=DC=gs,DC=domain,DC=pt]
[domain;DC=pt]
</ume.ldap.access.domain_mapping>
</privateSection>
</dataSource>
</dataSources>
Edited by: Joaquim Pereira on Feb 7, 2009 1:34 PMHi Gaetano
I tried to set back the "uniqueid" in the XML to samaccountname.
Also, i changed the spnego to go only to domain.pt (gs.domain.pt is a child domain).
In the 1st tests this worked perfectly, but we still to do some testings with this config.
When i get confirmation, ill reply here.
Thank you.
PS:. we thought on defining the abap user for each user, but there are a lot of users...
we'll try this config, and if it doesn't work, probably, thats what we'll do.
Edited by: Joaquim Pereira on Feb 12, 2009 5:45 PM
Everything seams to be working now. setting back the uniqueid to samaccountname and configuring spnego to go to only 1 domain solved the issue.
I just need to test which change did the trick.
Edited by: Joaquim Pereira on Feb 13, 2009 1:02 PM -
Not able to login after configuring SSH.Please reply
i have configured AAA on Cisco aeronet 1400 series wireless bridge (AIR-BR1410A-A-K9).After configuring i am not able to login to the device via telnet and via putty.Soon after enabling SSH i am not able to login even through SSH.The below are the commands i have configured on the device.I used to configure the same commands on my Cisco Switches also.
Layer -2
ip domain-name NETS
crypto key generate rsa general-keys modulus 1024
ip ssh version 2
aaa new-model
aaa authentication login Login-LAN group tacacs+ line
aaa authentication enable default group tacacs+ enable
aaa accounting exec EXEC-LAN-L2 start-stop group tacacs+
aaa accounting commands 1 Level-1-LAN-L2 start-stop group tacacs+
aaa accounting commands 15 Level-15-LAN-L2 start-stop group tacacs+
tacacs-server host 10.254.0.140 key !n01#zh3r3@|2
line vty 0 4
accounting commands 1 Level-1-LAN-L2
accounting commands 15 Level-15-LAN-L2
accounting exec EXEC-LAN-L2
login authentication Login-LAN
transport input sshHi,
Check out the connectivity between cisco aeronet and TACAS server and what is the failed logs says in tacas server.
If possible try to change the configuration to aaa authentication login Login-LAN(default) group tacacs+ line and then try what exactly happens.
Hope that helps
Regards
Ganesh.H -
Error while configuring SSO between Portal 7.0 and Operating System.
Dear all,
I am having an issue,i need to configure SSO between the Portal 7.0 and operating System.I have followed both the Kerberos as well as spNego wizard methods,but i am not able to configure UME settings as we are using datasourceConfiguration_abap.xml. I tried to edit the datasource confuiguration file but after editing the server is not starting.
Please let me know the steps i have to do to edit the datasourceConfiguration_abap.xml
We are not able to Map the Service USer to the UME CONFIGURATION XML File.
Thanks
Ravi.SRavi,
If you have successfully configured the SSO, please pass on the document if any you have.
Regards,
Mohammad. -
Wireless connectivity no longer available after TWC adds digital phone service
Hi All,
My problem is that my wireless Internet connectivity is no longer available after Time Warner Cable added digital phone service to my existing TV and broadband Internet service.
Prior to having the digital phone service added, my set up was a Motorola Surfboard cable modem connected to my Linksys WRT54G wireless router, with three computers (two Win XP desktops and one Win 7 laptop) wired to the Linksys router. I had wired Internet connectivity on all three computers. Importantly, I could also access the Internet wirelessly from the laptop instead of using a wire.
AFTER having the digital phone service added, my set up is the same except that now an Arris Touchstone Telephony Gateway (TG862G) has replaced the Motorola Surfboard cable modem. I still have wired Internet connectivity on all three computers. However, now I cannot access the Internet wirelessly from the laptop. This is a real problem in that often others in the house need access to the wireless network as well.
I should also mention that (from a wired connection) I cannot access the Linksys router any longer via 192.168.1.1. Now, the Linksys router seems to be "invisible," almost as though it were a pass-through device. I can access the Arris gateway at 192.168.0.1 (for what it's worth), but not the Linksys router.
Also, not sure this is important, but some time ago (when my wireless was working) I had configured the Linksys router so that it wouldn't broadcast the SSID. Through the Win 7 "Network and Sharing Center" I have tried to "manually connect" to my (hidden) wireless network. The message indicates that my hidden network already exists, but I still can't connect to it.
I've seen a few potential remedies involving power cycling the gateway and modem in certain sequences, setting the gateway's NAT mode to Bridged, etc., but nothing has worked so far. Time Warner Cable's only advice is for me to purchase (yet) another service so that the gateway can provide the wireless access, but I since my Linksys router worked before I'd rather stick with that method (and avoid yet another charge).
I would be very grateful for any help you could provide for this problem.
Thanks in advance.1. Don't hide your SSIDs
http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssid-really-more-secure...
2. I assume the Arris is also a wireless router. Use inSSIDer to find the best non-overlapping, non-interfering wireless channels. Change the wireless channels on both the WRT54G and Arris if necessary.
http://www.metageek.net/products/inssider/ -
Configure SSO for ITS to R/3 using SNC/Kerberos
Our R/3 systems had been configured for SSO using SNC and Kerberos for awhile now. We now have a requirement to configure SSO between ITS and R/3. Since our R/3 env. has been using kerberos library, we won't be able to use SAP Cryptographic library. I had modified the registry, environment and services in itsadmin to point to the kerberos library and principal names for agate and r/3 servers as described in SNC User Guide; also, I updated table SNCSYSACL with the Agate SNC name. That seems to work fine. From the trace file, it recognized GSS-API library for Kerberos and the SNC name for Agate. However, when I tried to logon to R/3 from ITS, I still am being prompted with the logon screen to enter my SAP account/password.
I found several whitepapers and documentations stating that ITS does support Kerberos for SSO but I couldn't find any procedure on how to implement it. Following is the error I'm getting from the sapbasis.trc file but I can't find any document on this error:
=====================================================
[Thr 5284] SncInit(): Initializing Secure Network Communication (SNC)
[Thr 5284] PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
[Thr 5284] SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "C:\WINNT\system32\gsskrb5.dll".
[Thr 5284] File "C:\WINNT\system32\gsskrb5.dll" dynamically loaded as GSS-API v2 library.
[Thr 5284] The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
[Thr 2888] Sun Jan 15 22:44:59 2006
[Thr 2888] <<- ERROR: SncSetParam()==SNCERR_PARAM_DENIED
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
[Thr 2888] Sun Jan 15 22:45:29 2006
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
=====================================================
Does anyone know what am I missing? Any help is greatly appreciated.
Thank you!
DiemHi Markus,
I also just installed/configured PAS for LDAP authentication using the "PAS for External Authentication Mechanisms" documentation. I think the domain problem probably due to not having the external authentication mechanism install (in this case - PAS). Does that sound right to you?
I tried both options for ~extid_type parameter = "LD" and "UN". I added the DN information to table USREXTID when ~extid_type="LD" but both options gave me error of "LDAP authentication failed". I increased the trace level for sapextaut.trc but I don't see enough detail information. Following are the errors/data from the trace file. Can you please let me know how I can tell what string is being passed for authentication?
I'm quite sure the LDAP host and port data is correct since we've been using the same information for the SAP LDAP connector and we've been using our LDAP connector between MS AD and R/3 for a long time without any problem.
To logon to R/3 through ITS, I entered the AD account (CN attribute in AD) when I got the errors.
Thank you very much for all your help.
Diem Tran
Trace:
=====================================================
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 437]: W sapextauth: PAS session begins...
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 456]: sapextauth: SncNameR3 is: "p:na1adm/[email protected]"
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 462]: sapextauth: SncNameAGate is: "p:[email protected]"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 468]: sapextauth: SNC_LIB is: "C:\WINNT\system32\gsskrb5.dll"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 568]: sapextauth: XGatConnectSession leaving....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 616]: sapextauth: XGatHandleLogin called....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 976]: sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 993]: W Either ~login or ~password missing, returning XGDKRCloginrequired.
2006-01-18T01:39:50.281 p001688 t4992 s00000000 [sapextauth, 398]: sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 616]: sapextauth: XGatHandleLogin called....
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 976]: sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1059]: sapextauth: LDAP port ist 389
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
2006-01-18T01:39:59.140 p001688 t4992 s00000000 [sapextauth, 398]: sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 616]: sapextauth: XGatHandleLogin called....
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 976]: sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1059]: sapextauth: LDAP port ist 389
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
======================================================= -
Problem in configuring SSO using SAML for applications hosted on diff m/c
Hi Techies,
I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
I am summarizing the problem below -
Steps followed for Configuring SSO using SAML
1. Created 2 domains on 2 seperate machines namely domainA and domainB
2. Source appliction is deployed on domainA and the target application is deployed on domaninB
The steps mentioned in the following tutorial has been followed-
http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
to WEBLOGIC_HOME/server/lib of destination machine.
4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
is thrown -
" SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
in the FederationServicesMBean, key alias: testalias "
The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
problem only occurs when domains are created on seperate machines.
Alterative to the problem: when the certificate is generated seperately for domainB and copied to
WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
Note: I am using Weblogic portal 9.2.1
Any quick replies will be much appreciated. Thanks.
Edited by saurabh.agrawal at 02/06/2008 2:01 PMHi François,
You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
-Vinod -
WebLogic Server doesn't start after configuring a Custom Realm
Hi,
We are having problems getting WebLogic server to startup after configuring a
Custom Realm. It outputs the error message "User System not authorized to boot
WebLogic Server. Security Excpetion".
For debugging purposed we had our Custom Realm classes output some debug statements
to the console. From the output it was apparent that all the users were getting
authenticated properly including System, Administrator, wliSystem etc. But after
the initial authentications we get this error message. I am attaching the log
file for your reference. Do we have to implement Authorization also (by implementing
ACLImpl) in the Custom Realm. Our Custom Realm was planned to be used only for
authentication.
Appreciate any feedback on the cause of the problem.
Thanks
Vikram
[test.log]Thanks Deyan. I will give it a try and let you know.
"Deyan D. Bektchiev" <[email protected]> wrote:
Vikram,
You should make your user that you use to startup the server a member
of
the Administrators group.
In other words there should be a Principal "Administrators" in the
Subject that your LoginModule returns.
I'm not sure if you can configure this afterwards but this is how it's
done out of the box.
Dejan
Vikram wrote:
Mike,
We are working with a Platform domain on Weblogic 7.0. When you implementa custom
realm it can be implemented just for authentication and not for authorization.
In our case we used the Custom Realm only for authentication. ACLs storeall the
authorization information. We assumed that the standard Weblogic useraccounts
like system, administrator are already part of the ACLs with the appropriateprivileges.
Please let me know if you have any suggestions.
Thanks
Vikram
"mike" <[email protected]> wrote:
You mix up authentication and authorization. The fact that a user is
a valid user
(authentication) does not guarantee that he/she can perform a certain
action (authorization).
The second is defined by ACLs or something, which is probably (most
likely)
not
set in your case. To go on ranting I need to know which version youare
on (looks
like 7, grey area for me).
"Vikram" <[email protected]> wrote:
Hi,
We are having problems getting WebLogic server to startup after configuring
a
Custom Realm. It outputs the error message "User System not authorized
to boot
WebLogic Server. Security Excpetion".
For debugging purposed we had our Custom Realm classes output some
debug
statements
to the console. From the output it was apparent that all the userswere
getting
authenticated properly including System, Administrator, wliSystemetc.
But after
the initial authentications we get this error message. I am attaching
the log
file for your reference. Do we have to implement Authorization also
(by
implementing
ACLImpl) in the Custom Realm. Our Custom Realm was planned to be used
only for
authentication.
Appreciate any feedback on the cause of the problem.
Thanks
Vikram -
DNS Server does not resolve new generic Top Level Domain names- CNR configuration issue?
Hi all,
I am not sure if this is the correct community to post this question, but I will give it a try. I noticed that the users of my network cannot resolve web sites using new top level domain names, like ".education", ".international", etc. I have an internal DNS server made by Infoblox and a Cisco CNR v6.3.3.1 as an external DNS server. Infoblox uses CNR as its forwarder and CNR uses the root DNS servers for queries.
I would think that CNR was the problem because it is an obsolete product but after speaking with a fellow engineer at another organization where they still use an older version of CNR than mine, they have no problems at all. So now I am thinking it is a setting either on Infoblox, or on CNR I need to change. I can see Infoblox is forwarding the requests to CNR but that's about it. I am not sure if CNR is discarding the request. When I do an nslookup from a PC in my network it does not matter if I set my DNS server to be the Infoblox or the CNR. Neither resolves the URL.
Then again, no matter what I lookup using the CNR as my DNS, I only get a response with the root DNS names and IPs!
Any help is appreciated!Hi Constantinos,
Have you taken a look at the infoblox community site? We've just reposted your question there and alerted some internal SMEs that should provide a solution soon.
https://community.infoblox.com/forum/ddi/dns-server-does-not-resolve-new-generic-top-level-domain-names-cnr-configuration-issue
Best,
Eric -
Hello everyone,
I have recently installed EP 7.0 and Solman 4.0 and i am trying to connect through SSO. so i followed the following steps.
1) logged into visual admin and created a new certificate in keystore.
2) exported the certificate into local desktop.
3) I then installed the certificate by right clicking on the certificate.
4) I then went to STRUSTSSO2 in solman and imported the certificate and added it to certificate list and in the ACL list i added the portal system (ADP) and the client 001.
5) I also set the login/create_sso2_ticket=2 and login/accept_sso2_ticket=1 in the solman system.
6) I restarted the solman instance after parameter change.
7) I logged into the portal system and now i am not able to see the solman system in there.
can you please tell me if the steps i followed are correct and what additional steps i need to configure.
Thanking you all
SrikanthBelow threads will gove complte information about sso These links will help you..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7b5ba90-0201-0010-4dbc-8f999dcd2798
http://help.sap.com/saphelp_nw70/helpdata/en/26/91b8fc431931449f04a1f1ec228021/frameset.htm
Very Good Pdf expalining the same.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0c78148-12de-2a10-27bf-960acc753aab
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/sso%2bchecklist
Connecting SAP systems to Enterprise portal with SSO.
Quick Guide for setting up SSO between EP and R/3
SAP Logon Ticket-based Single Sign-On
I think by configuring sso itself , solution manager wont appear in portal.You have to create system alias to access information from backend( solution manager) .
Create an iview and use system alias to get the required information from backend to portal.
Koti Reddy -
Changing domain name after 12i installation
Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1
Maybe you are looking for
-
File upload cannot store file on server?
I have an application .ear that i have built using j2sdkee1.3.1 (windows). I have also deployed this application on a remote unix jboss server. I have found that all parts of the application work in both environments accept for the file upload functi
-
More bad wifi... with a myspace twist! any ideas?
i'm one of the gazillions of people with touchy wifi on my new macbook. i have pretty good luck on public/open wifi networks, but when using my home network, i experience lots of the same problems that other users have been reporting here... side not
-
I am trying to back up my blackberry onto my PC as I am receiving a new blackberry tomorrow, once I click back up it says back up successful, however once I disconnect my blackberry from the laptop and click on the back up that's has been saved, it
-
What is my restriction code?
What is my restriction code?
-
Aperture update refusing to install
Although i have Aperture 3.3 installed the update to 3.3.2 refuses to install with message "Aperture 3.0 or later is required to install this update." This is the reason what App Store ist not listing Aperture when an update is available. What coul