Entering Automation Values

The Auotmation features are great, but is there another way to enter in the value changes rather than clicking/drawing/dragging them? or can you enter in more defined values similar to the way you enter values into the Event Lists window? The standard method seems a bit imprecise (not that anyone would hear the diffrence a few ticks here and there would make)... just curious.

That is correct. And you can use this window in conjunction with the Marquee Tool if you wish. Mark the area around the node you want to adjust, open the Automation Editor window, adjust the value of the node and it is updated immediately. Handy feature, but I´d probably just drag the node itself... But anyway, nice trick it is.
/juhani

Similar Messages

Entering mulitple values for a single user parameter

Hello,
Can anyone explain to me how to allow multiple values for a single parameter?
For example, say I want to allow the report to display a list of employees based on their employee id. I want to allow the user to enter mulitple
employee id's into a single field to get their report. SO the user would enter "241, 459, 832" to return the list of those 3 employees. I have the SQL set up below, but obviously I need to set up something different to break it out into 3 separate values. Any help would be greatly appreciated!
SELECT * FROM EMPLOYEE
WHERE EMPLOYEE_ID IN (:P_EMP_ID)

Hi,
Another way to do this is to use the lexical parameter, but then you have to create the parameter form in Forms. Your SQL would look like this for example:
select * from emp where empno is not null &empno
where &empno is a lexical parameter.
Then on your parameter form you would have a text field F_empid, say 200 character long, allowing the user to enter multiple values separated by a ",".
Then in the trigger that calls the report you would create a parameter list, and a variable that holds the values read from the form, this variable is where you define the value to be passed to the report's lexical parameter. For example:
declare
v_empid varchar2(200); (consistent with the length of the lexical parameter in the report).
begin
v_empid:='and empno in ('||F_empid||')';
then you pass v_empid to &empno in the call to the report.
This method works well. Good luck.

How to suppress "enter parameter values" screen in crystal reports for Visu

Hi,
    I am passing parameters to the report through program. But still the "Enter Parameter Values" Dialog is shown every time I run the application. Code used to pass parameters is given below:
                rptCBBookRpt objRptCBBook = new rptCBBookRpt();
                objRptCBBook.SetParameterValue("@Branch", strBranch);
                objRptCBBook.SetParameterValue("@CoName", mdlFinIF.objCommon.CoName);
                objRptCBBook.SetParameterValue("@Heading", strHeading);
                objRptCBBook.SetParameterValue("@UserInfo", mdlFinIF.objCommon.ReportInfo());
How can I suppress the "Enter Parameter Values" dialog. Please help.
Cris Evan

Well, no. But this being a community, not technical support, you may get a response, perhaps even an actual answer, or you may not...
If you are not getting a response or an answer, you may want to consider obtaining a dedicated support here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Look at samples here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Check out the [Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] - it will apply to your version of CR...
And of course, developer help files.
- Ludek

How to enter the values in JTable in runtime

how to enter the values in JTable in runtime

Basically you need a vector of vectors or an array of arrays. Example (off the top of my head):
With Arrays
String[] cols = { "colone", "coltwo", "colthree", "colfour", "colfive" };
String[] numbers = { "one", "two", "three", "four", "five" };
String[] letters = { "A", "B", "C", "D", "E" };
String[][] data = { numbers, letters };
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));
With Vectors
Vector cols = new Vector();
cols.addElement("colone");
cols.addElement("coltwo");
cols.addElement("colthree");
cols.addElement("colfour");
cols.addElement("colfive");
Vector numbers = new Vector();
numbers.addElement("one");
numbers.addElement("two");
numbers.addElement("three");
numbers.addElement("four");
numbers.addElement("five");
Vector letters = new Vector();
numbers.addElement("A");
numbers.addElement("B");
numbers.addElement("C");
numbers.addElement("E");
numbers.addElement("F");
Vector data = new Vector();
data.addElement(numbers);
data.addElement(letters);
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));The array or vector can be easily populated at runtime.
Regards
Riz

How to enter negative value in a currency field

Hi Experts,
Please help me how to allow to enter negative value in a field on report selection.
I created a currency field on a report selection using PARAMETERS.
I can enter positive value in the field. But, I cannot enter negative value.
SAP shows an error message 00 126 "Specify positive values only".
I know I can place check ON at "with sign" option of the field in case I create the screen by myself.
However, I cannot do it on screen 1000 created by report program.
Thanks,
George

Hi ,
I know I can place check ON at "with sign" option of the field in case I create the screen by myself.
Prabhu--> Just Create a new Domain( select "WITH SIGN") and date elemet,And Use Data Element in your report.
regards
Prabhu

How to disable "Enter Parameter Values" for optional paramters?

I'm having issues getting the Crystal Reports .NET Viewer to suppress the "Enter Parameter Values" dialog for optional parameters. I have templates created using Crystal Reports 2008 and am linking against the CR for VS 2010 runtime.
Within the report template the optional paramter has "Optional Prompt" set to "True". This particular parameter also allows multiple values and is used in record selection. Within the record selection it is using HasValue().
It seems the parameter is set up properly as I have other parameters that are set within the code that are not prompted for. If I pass in the optional parameter through the code the "Enter Paramater Values" dialog also does not appear and the report is generated correctly. All of the parameters are set using ParameterFields and they are set before the ReportSource is set.
Looking through the .NET API documentation it seems like the CrystalReportViewer should have an "EnableParameterPrompt" property that would do what I want however it doesn't seem to be a valid parameter as I get compile errors when I try to use it... Not sure if it matters or not but I am using managed C++ and our application is built using Visual Studio 2005. Could that maybe have something to do with it?
Thanks,
-Ben

OK, I'm going to answer my own question as with a little more digging I was able to find out that I needed to set some stuff on the report document to specify that there are no values. Still not sure why "EnableParameterPrompt" is not valid for me though as it seems like that would work as well. At any rate here is what I needed to do:
ReportDocument->ParameterFields[<Optional Parameter Name>]->CurrentValues->Clear();
ReportDocument->ParameterFields[<Optional Parameter Name>]->CurrentValues->IsNoValue = true;
-Ben

How to enter a value into datagrid cell in wpf through manually?

Hi,
Here my datagrid rows are in readonly mode here how can i enter the values in to the datagrid cell.(means how can i edit the cell value).i am adding the value to datagrid through programetically, I think for this reason my datagrid rows
are visible in readonly mode. Then how can i edit. Please guide me.
Regards,
Bhadram

Hi Barry,
Thank you for your reply, Now i sending my sample please check it once and suggest me.
MainWindow.xaml.cs
private void Save_Click(object sender, RoutedEventArgs e)
List<CustomerMainViewModel> customer = new List<CustomerMainViewModel>(); customerviewmodel.NameTextField = tbName.Text;
customerviewmodel.AddressTextField = tbAddress.Text;
customerviewmodel.CountryField = countryddl.Text;
customerviewmodel.StateField = stateddl.Text;
customerviewmodel.Product = customerviewmodel.Product1 + "," + customerviewmodel.Product2;
foreach(string str in customerviewmodel.actionCollection)
customerviewmodel.ActionColl.Add(str);
customerviewmodel.actionCollection.Clear();
customer.Add(customerviewmodel);
dataGrid1.Items.Add(customer);
MessageBox.Show("Data Successfully Saved", " MessageBox", MessageBoxButton.OK, MessageBoxImage.Asterisk);
clearValues();
MainWindow.xaml
<DataGrid
Height="144"
HorizontalAlignment="Left"
Margin="79,447,0,0"
Name="dataGrid1"
VerticalAlignment="Top" CanUserAddRows="True"
Width="399" Grid.RowSpan="2" IsReadOnly="False">
<DataGrid.Columns>
<DataGridTextColumn Header="NAME" Binding="{Binding NameTextField,Mode=TwoWay}" Width="Auto" IsReadOnly="False" />
<DataGridTextColumn Header="ADDRESS" Binding="{Binding AddressTextField,Mode=TwoWay}" Width="Auto" IsReadOnly="False"/>
<DataGridTextColumn Header="GENDER" Binding="{Binding GenderField,Mode=TwoWay}" Width="Auto" IsReadOnly="False"/>
<DataGridTextColumn Header="COUNTRY" Binding="{Binding CountryField,Mode=TwoWay}" Width="Auto" IsReadOnly="False"/>
<DataGridTextColumn Header="STATE" Binding="{Binding StateField,Mode=TwoWay}" Width="Auto" IsReadOnly="False"/>
<DataGridTextColumn Header="PRODUCT" Binding="{Binding Product,Mode=TwoWay}" Width="Auto" IsReadOnly="False"/>
<DataGridTemplateColumn Header="ACTION" MinWidth="140" IsReadOnly="False">
<DataGridTemplateColumn.CellTemplate>
<DataTemplate>
<ComboBox x:Name="actionddl" ItemsSource="{Binding ActionColl}"/>
</DataTemplate>
</DataGridTemplateColumn.CellTemplate>
</DataGridTemplateColumn>
</DataGrid.Columns>
</DataGrid>
In the above "xaml" file i am using the attribute "Readonly="False"" but its not effected on my code still my datagrid is in readonly mode, i don't know why it happens.
And I am adding data to my datagrid through "Wpf controls (TextBox,CheckBox,ComboBox and etc...)" while click on "save" button the data added to grid. adding to grid works properly but the entire row is in readonly mode. How can
i solve my problem.

How to enter a value versus picking one from the pop-up menu?

I am new to numbers and am using version 3.5.2. I understand one can define a Pop-Up for cell value selection, but what if I want to also be able to specify a value that is not in the pull down? I thought "start with blank" would do the trick, but it won't let me enter any values. Thanks in advance for your suggestions!

Hi Sultry,
If your entry is a one time deal you could just delete the cells value and type in your choice. If you want to update your popup you need ot redefine its values. And then of course replace your old popups with your new one.
quinn

Error Enter a value for field BP_GUID

I am using MDG 7.0
When I create a Request for "Create ERP Customer",
I then enter data including the sales Area Data and Company Code data
Then Submit
at the following approval step , Sales Area data and CC data is missing.
I get ERROR message "Enter a value for Field BP_GUID"
Please advise what Table or T-code am I missing values for .
Thanks for your assistance,

hi,
See the attached screen shot.
Regards,
Tushar

In ID object Communication Channel - Enter a value for Service Number?

Hi,
I have completed all the steps of this link upto 4.5 > 11,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
but when i activate my messge interfarence from senario tab list or change object tab list, <b>it is showing error that :
Check Result for Object Communication Channel(GeneratedReceiverChannel_XI ) Enter a value for Service Number</b>
address type: URL Adress
target host: my bi server aibid
Service Number: ?????????
Path: /sap/xi/engine?type=entry
What is the Service NO.
Best Regards,
Dushyant.

Hi,
>>>>The serice number is ur port number. In your XI system URL http://host:port/rep/start/index.jsp
this is the j2ee port and he should put http port
as his path is: /sap/xi/engine?type=entry
on WAS ABAP I guess..
Regards,
michal

Field "Value field texts" is disabled to enter new values

Hi there,
I'm trying to enter new values on the field "Value field texts" from Depreciation Area, in Config Asset Value Display(Financial Accounting (New) > Asset Accounting > Information System > Configure Asset Value Display). The fields are disbled to enter new text values.
I don't know what's happening. I've see the SAP Note 121433, but I don't intend to request the creation of a program to fill these fields. Does anyone know if there's another way to deal with this?
Thanks in advance.

Hi Srinivasa,
Thanks for reply. I've checked the transaction ANSICHT following the steps said and the Master Data fields are with "No authorization" for all Depreciation areas.
Do you know if there's another way of enable these fields? We cannot change the Authorization settings from one Depreciation Area to another.
Thanks a lot.

Entering charct. values at the time of GR

Hi All...
We have a Issue regarding raw material receiptu2026
We r getting Ores (ROH) from different parties, they send test certificate with every lot. We need to enter the % of nickel or Chrome etc at the time of GR for PO. After that stock will move to quality stock where they will check the parameters and record. Purchase dept will compare the results.
I tried this by giving Material class (001) for the material, but itu2019s not asking the characteristic value at the time of GR.
My requirement is at the time of GR, system should ask the characteristic value..we dont want to manage stock in batches..
Please share ur thoughts.
srini

During GR U can only enter Characteristics Value for Batch Class under Classification. For which Material should be Batch managed and use calss type 022 (if batches are at plant level) or 023 (if batches are material or client level). Create a class type of 022 or 023 and assign to Materail master and also activate batch management for the material and then try to create GR, it will allow to enter the values for characteristics.

How to allow user to enter new values in a segmnt which's having a ValueSet

Hi Gurus
I am having a DFF segment where user needs the following validation. I have to check whether the value entered by user is having status number as 5 in a custom table. I can do this by Table type Validation.
But the problem here is, they should also be able to enter new values which not in that table.
How i can achieve this. Appreciate your help on this.
Thanks.
Praveen

Value sets allow only for standar list for validation, not a combobox that is what may help You to achieve what You want. You either have a restricted list or an open field to type whatever matches the format restrictions.
For what You specify, I see no reason on having a table validation is the user can after all enter new values, perhaps it's to have the table values as references and avoid duplicates. Workarounds may be:
Add an "others" value to the table, and enable another segment to enter new values and add custom validation to avoid duplicates and insert the new values to the table for future use.
Have an independent value set and add a customization to avoid duplicates (more difficult considering typos) and insert new values.

On and iPad how to Allow User To Enter Custom Text (Dropdown only) Enables users to enter a value other than the ones in the list.

On an iPad, how do I :
Allow User To Enter Custom Text
(Dropdown only) Enables users to enter a value other than the ones in the list.'?

Are you using the built-in Currency option under the Format tab? If so,
what you're describing should not happen.

How to force the user to enter a value in the prompt

Is there a way to force the user to enter a value in the prompt before they run the report?
We have a customer specific dashbaord. The user has to enter a customer number in Dashbaord prompt on a first page of the dashboard. We store that value in a presentation variable. That presenatation variable value is being referenced in all the other pages of the dashabord. If the user does not enter a values in the first page and directly navigates to the other pages on the dashbaord, the reports on the other pages start to run for all the customers. Is there a way to force the customer to enter a value in the prompt before running any of the reports on the dashboard?
Thanks!

by Answer prompts, do you mean Column prompt?
I can not use Column prompt in this senario as the user should not have to enter the same customer number over and over again when he navigates from one page to another on the same dashboards. If there is a way to default the column prompts then this would be an acceptable solution.
I have already defaulted the prompt to a value as suggested in hte blog, but the issues occurs when the user erases the defaulted value. Is there are way to set the default value within the report?
Can you please explaing mroe about option 3 regarding Java Script. Also please let me know what other options there are so that I can check whether they will fit my needs.
Thank you very much!

Entering Automation Values

Similar Messages

Maybe you are looking for