"enters in the incoming data"
Hi, I'm new in Abap and I'm implementing SAP, I have a front office where I bring a table called Entities but the field name came with "enters" from an oracle database, through the interfase I have to put the data in SAP but people told me that sap cant eliminated the enters it is true?
If this is not true, how you can eliminated the "enters"?
Thank u very much
Hi
but which enter? which table?
Can u give us more details?
Max
Similar Messages
-
How to Maintain Cube without Aggregating the incoming data
Hi All,
I have a process which loads a cube and then aggregates the incoming data. The PL/SQL procedure is as below.
CREATE OR REPLACE PROCEDURE load_actual AS
xml_clob clob;
xml_str varchar2(4000);
isAW number;
begin
DBMS_LOB.CREATETEMPORARY(xml_clob,TRUE);
dbms_lob.open(xml_clob, DBMS_LOB.LOB_READWRITE);
dbms_lob.writeappend(xml_clob, 183, ' <BuildDatabase Id="Action4" AWName="FIN_AW.FINAW" BuildType="EXECUTE" RunSolve="true" CleanMeasures="false" CleanAttrs="false" CleanDim="false" TrackStatus="true" MaxJobQueues="0">');
dbms_lob.writeappend(xml_clob, 42, ' <BuildList XMLIDref="ORG_ACTUAL.CUBE" />');
dbms_lob.writeappend(xml_clob, 18, ' </BuildDatabase>');
dbms_lob.close(xml_clob);
xml_str := sys.interactionExecute(xml_clob);
dbms_output.put_line(xml_str);
end;
As per my requirement I have to flip sign for some leaf level dimensions after the cube load and then re run the aggregate. If I go with this script I will end up aggregating my data twice.
My question is how do I modify this script so that the records are loaded in the cube but the aggregate does not run.
I tried by changing RunSolve="true" parameter as below but still it is solving the data.
dbms_lob.writeappend(xml_clob, 184, ' <BuildDatabase Id="Action4" AWName="FIN_AW.FINAW" BuildType="EXECUTE" RunSolve="false" CleanMeasures="false" CleanAttrs="false" CleanDim="false" TrackStatus="true" MaxJobQueues="0">');
My cubes are compressed, partitioned and I am using Oracle 10.2.x.
Please provide your suggestions if I missing something here ?
Thanks,
Vishal10g Cubes have a property called 'AutoSolve'. As far as I understand, if this is set to YES, then the aggregation will happen automatically whenever you build the cube. I may be missing something, but the RunSolve property of the BuildDatabase command does not seem to be used.
In AWM the "AutoSolve" property appears to correspond to the check box
"Use Default Aggregation Plan for Aggregation"
in the "General" tab for the cube. In order to uncheck this you also need to uncheck "Use Compression" on the "Implementation Details" tab.
As an example, I created a cube named C1 with the box checked and then exported the XML.
<Cube Name="C1" LongName="AMERICAN::C1" ShortName="AMERICAN::C1" PluralName="AMERICAN::C1" Id="C1.CUBE" Schema="GLOBAL" UseGlobalIndex="false" SparseType="COMPRESSED" DefaultDataType="NUMBER" AutoSolve="YES">
I then created cube C2 with it unchecked.
<Cube Name="C2" LongName="AMERICAN::C2" ShortName="AMERICAN::C2" PluralName="AMERICAN::C2" Id="C2.CUBE" Schema="GLOBAL" UseGlobalIndex="false" SparseType="STANDARD" DefaultDataType="NUMBER" AutoSolve="NO">
The compression check is enforced by AWM. I hand modified the XML for cube C1 to switch AutoSolve to NO and used it to recreate the cube without errors (as a compressed cube). I don't know if there will be any issues downstream. -
data comes at the rate of 50 ms. So this data has to be stored in a temprorary location say array or circular buffer.After 60 minutes, the new data should append at the last value and the first value should be deleted. Please help.
First thing I would do is search the examples, there are a couple seamless acquisition examples that ship with LV that should do the trick for you. Working in your favor is the fact that you aren't needing to sample incredibly fast, or collect a huge amount of data.
However, typically managing arrays in LV isn't very hard. What specific troubles are you having?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Split the incoming data into multiple grouped output records
I have three fields in the source, Student ID, Student name and Student Marks. I need to map the details in the destination, by grouping the data on the basis of marks obtained. Each time there's a new mark , the corresponding details of names and student
ID is saved under the a new mark group that is created. how do i come about it when there are n number of new marks?for your scenario i used below xml as input,
<ns0:Students xmlns:ns0="http://BTSTempProj.StudentDetailsIn">
<Student>
<StudentID>StudentID_0</StudentID>
<StudnetName>StudnetName_0</StudnetName>
<StudentMarks>10</StudentMarks>
</Student>
<Student>
<StudentID>StudentID_0</StudentID>
<StudnetName>StudnetName_0</StudnetName>
<StudentMarks>20</StudentMarks>
</Student>
<Student>
<StudentID>StudentID_0</StudentID>
<StudnetName>StudnetName_0</StudnetName>
<StudentMarks>10</StudentMarks>
</Student>
<Student>
<StudentID>StudentID_0</StudentID>
<StudnetName>StudnetName_0</StudnetName>
<StudentMarks>10</StudentMarks>
</Student>
<Student>
<StudentID>StudentID_0</StudentID>
<StudnetName>StudnetName_0</StudnetName>
<StudentMarks>20</StudentMarks>
</Student>
<Student>
<StudentID>StudentID_0</StudentID>
<StudnetName>StudnetName_0</StudnetName>
<StudentMarks>30</StudentMarks>
</Student>
</ns0:Students>
and here is the output, hope this is what you are looking for.
<ns0:Students xmlns:ns0="http://BTSTempProj.StudentDetailsOut">
<StudentMarks>10</StudentMarks>
<Student>
<StudentName>StudnetName_0</StudentName>
<StudentID>StudentID_0</StudentID>
<StudentName>StudnetName_0</StudentName>
<StudentID>StudentID_0</StudentID>
<StudentName>StudnetName_0</StudentName>
<StudentID>StudentID_0</StudentID>
</Student>
<StudentMarks>20</StudentMarks>
<Student>
<StudentName>StudnetName_0</StudentName>
<StudentID>StudentID_0</StudentID>
<StudentName>StudnetName_0</StudentName>
<StudentID>StudentID_0</StudentID>
</Student>
<StudentMarks>30</StudentMarks>
<Student>
<StudentName>StudnetName_0</StudentName>
<StudentID>StudentID_0</StudentID>
</Student>
</ns0:Students>
Please find the below xslt which you can use, it is basically based on the Muenchian grouping suggested by Ashwin
<?xml version="1.0" encoding="UTF-16"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:var="http://schemas.microsoft.com/BizTalk/2003/var" exclude-result-prefixes="msxsl var s0" version="1.0"
xmlns:ns0="http://BTSTempProj.StudentDetailsOut" xmlns:s0="http://BTSTempProj.StudentDetailsIn">
<xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />
<xsl:template match="/">
<xsl:apply-templates select="/s0:Students" />
</xsl:template>
<xsl:key name="groups" match="Student" use="StudentMarks"/>
<xsl:template match="/s0:Students">
<ns0:Students>
<xsl:for-each select="Student[generate-id(.)=generate-id(key('groups',StudentMarks))]">
<xsl:sort select="StudentMarks" order="ascending"/>
<StudentMarks>
<xsl:value-of select="StudentMarks/text()"/>
</StudentMarks>
<Student>
<xsl:for-each select="key('groups',StudentMarks)">
<StudentName>
<xsl:value-of select="StudnetName/text()"/>
</StudentName>
<StudentID>
<xsl:value-of select="StudentID/text()"/>
</StudentID>
</xsl:for-each>
</Student>
</xsl:for-each>
</ns0:Students>
</xsl:template>
</xsl:stylesheet>
Regards, Amit More -
E50 as modem - answering incoming data call?
I'm trying to use an E50 as a modem to answer incoming data calls to a properly configured Windows Server 2003 RRAS setup (I know RRAS is set up correctly because I can make incoming calls via a landline modem).
The phone answers the incoming data call, and bleeps for a couple of minutes, then drops the call. There's nothing in the event log saying that anything got from the modem driver into the RRAS system.
Where do I start looking?You have incoming data activated from your mobile operator?
-
If Records of different list items are entered, then the data is not getting inserted in the table.
Hi Everyone,
A Very Very Happy, Fun-filled, Awesome New Year to You All.
Now coming to the discussion of my problem in Oracle Forms 6i:
I have created a form in which the data is entered & saved in the database.
CREATE TABLE MATURED_FD_DTL
ACCT_FD_NO VARCHAR2(17 BYTE) NOT NULL,
CUST_CODE NUMBER(9),
FD_AMT NUMBER(15),
FD_INT_BAL NUMBER(15),
TDS NUMBER(15),
CHQ_NO NUMBER(10),
CREATED_DATE DATE,
CREATED_BY VARCHAR2(15 BYTE),
PREV_YR_TDS NUMBER(15),
ADD_FD_AMT NUMBER(15),
DESCRIPTION VARCHAR2(100 BYTE),
P_SAP_CODE NUMBER(10),
P_TYPE VARCHAR2(1 BYTE)
The form looks like below:
ENTER_QUERY EXECUTE_QUERY SAVE CLEAR EXIT
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
R
W
P
List Item
There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
The user will enter the data & save it.
So all this will get updated in the table MATURED_FD_DTL .
I am updating one column in another table named as KEC_FDACCT_MSTR.
and
I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
CREATE TABLE KEC_FDACCT_DTL
FD_SR_NO NUMBER(8) NOT NULL,
FD_DTL_SL_NO NUMBER(5),
ACCT_FD_NO VARCHAR2(17 BYTE) NOT NULL,
FD_AMT NUMBER(15,2),
INT_RATE NUMBER(15,2),
SAP_GLCODE NUMBER(10),
CATOGY_NAME VARCHAR2(30 BYTE),
PROCESS_YR_MON NUMBER(6),
INT_AMT NUMBER(16,2),
QUTERLY_FD_AMT NUMBER(16,2),
ITAX NUMBER(9,2),
MATURITY_DT DATE,
FDR_STAUS VARCHAR2(2 BYTE),
PAY_ACC_CODE VARCHAR2(85 BYTE),
BANK_CODE VARCHAR2(150 BYTE),
NET_AMOUNT_PAYABLE NUMBER,
QUATERLY_PAY_DT DATE,
CHEQUE_ON VARCHAR2(150 BYTE),
CHEQUE_NUMBER VARCHAR2(10 BYTE),
CHEQUE_DATE DATE,
MICR_NUMBER VARCHAR2(10 BYTE),
PAY_TYPE VARCHAR2(3 BYTE),
ADD_INT_AMT NUMBER(16,2),
ADD_QUTERLY_FD_AMT NUMBER(16,2),
ADD_ITAX NUMBER(16,2),
ECS_ADD_INT_AMT NUMBER(16),
ECS_ADD_QUTERLY_FD_AMT NUMBER(16),
ECS_ADD_ITAX NUMBER(16)
So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
BEGIN
Commit_form;
UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
IF :P_TYPE='P' THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
COMMIT;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
END;
If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
The problem what is happening is,
If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
Even the records with 'P' is not getting updated.
I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
So, can you please help me with this.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms Builder 6i.Its not working properly.
At Form_level_Trigger: POST_INSERT, I have put in the following code.
IF :P_TYPE='P'THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
It worked properly when i executed first time, but second time , in database duplicate values were stored.
Example: First I entered the following in the form & saved it.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
250398
52
50000
6000
0
600
0
45415
P
5678
int1
320107
56
100000
22478
3456
2247
0
45215
R
456
320108
87
50000
6500
0
650
0
21545
W
0
In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
ACCT_FD_NO
P_TYPE
250398
P
But second time, when i entered the following in the form & saved.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
260189
82
50000
6000
0
600
0
45415
P
5678
interest567
120011
46
200000
44478
0
4447
0
45215
R
456
30191
86
50000
6500
0
650
0
21545
W
56
In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
ACCT_FD_NO
P_TYPE
250398
P
250398
P
260189
P
320107
R
320108
W
There was duplicate of 250398 which i dint enter in the form second time,
All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
How do i do this??? -
I enter dates and appointments on my iPhone Calendar but they do not sync with my iCal or iCloud Calendar on my Mac Pro. BUT dates entered on the Mac Pro do sync and appear on my iPhone Calendar. What am I doing wrong please? How do I resolve it?
Everything synched fine before under Mobileme!Me too me too! Please answer!
-
I had my bank card accidently cancelled by my bank. I have entered the new card number into payment section and it is asking for a date. Is that date the time the card began or finishes - the section does not make is clear. Thanks
I know of no banking or credit company on the planet that would ever ask or need to ask about the "beginning" date on a crdedit or debit card.
I'd have no way of replying to such an absurd question if I were ever asked. -
Validate Date if it falls within 30, 120 and 365 days of the audit date I enter on any given day
PDF Forms in Acrobat 9 Pro
When auditing a file, I enter the date I am auditing it.
Example: 02/18/2015
I then enter dates of when information was last verified. Some of these dates need to fall within 30 days of the audit date I enter on any give day and others need to fall within 120 days and another within 365 days. If they don't fall within the specified number of days for that field, I would like it to give an error message in that filled.
Examples:
College Grad Date 01/15/2015
Certification Date 12/23/2015
License Date 02/13/2014 - This is over 365 days so I do not want the date, I want it to display "Need to re-verify"
I do not have any inkling of an idea of how to write this. Your help would be most appreciated.
Thank you.Solved the problem- I contacted apple on their support line found on this page... http://www.apple.com/uk/support/mac/ and they were really helpful and talked me through what to do on the phone, I now have all three productivity apps. Hope this helps
-
Pre-populating a date/time column with the value entered in the last added item
I have a list with a column called "expected finish date". Whenever the user adds the very first item in a list, he/she should have to enter a value for this column.
I want to make all new item entries to pre-poplate this field with the value entered in the previously added item. This way, he/she wont have to re-enter the date every time (which rarely changes). How can this be done?could create a second list ("state") with column ("default finish date")...
create a workflow on main list... if column is blank/empty, pull from second list... otherwise, update second list with the value that was entered.
Or, customize the form (InfoPath or JavaScript)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
Screen refresh problem where data is entered and the screen doesn't refresh
Many people in the company are experiencing the odd screen refresh problem where data is entered and the screen doesn't refresh to show the updated result in corresponding cell formulas.
Microsoft have issued a hotfix to fix the issue for Excel 2003 as shown. Microsoft released a hotfix for this problem (<a href="advisory?ID=978908">KB978908</a>). Display memory tends to pick up data from hidden sheets and pastes it
into the active screen. No impact on the file. This occurs when protecting and unprotecting worksheets in VBA. I also suspect that enabling and disabling screen refresh contributes to this problem. In any case there is a fix, albeit with the following disclaimer:
As of yet I have not been able to find a fix for this for office 2010 and 2013, Any suggestions would be great.Hi,
Based on your description, Excel does not show the text strings when you typing. It may be caused by the cell format, if we set the cell format as ";;;" in custom format, it will not display the text that you typed.
And the issue may be caused by the third-party input method, there are some compatibility issue between them.
If the issue still exits, please try the following methods
Verify/install the latest updates
Repair your Office program
Regards,
George Zhao
TechNet Community Support -
When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?
What you say about Send Later timestamp is correct.
When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
Please voice your vote at this link:
https://bugzilla.mozilla.org/show_bug.cgi?id=560901
You will need to logon/register. -
Data entered in the custom field in the SRM portal not getting saved..
Hi Experts,
I have added a custom field in Contract Screen of the SRM portal by adding the field as an append structutre in structure INCL_EEW_PD_HEADER_CSF_CTR.
The custom field now appears in the header (basic data ) of the 'Process contract' screen.
NOw It allows me to enter data in the custom field .
The problem is ..
When I 'CHECK' or "RELEASE' the contract, the value entered in the custom field disappears..
How do i capture the data entered in the custom field ...please HElp!!!
Thanks in Advance.
VidyaHi Pradeep,
Thanks for the reply!!
We have upgraded our SRM system from 3.0 to 5.5
I have added the custom field in structures INCL_EEW_PD_HEADER_CSF_CTR and
INCL_EEW_PD_HEADER_CSF as the field has to appear in the basic data tab of 'Process Contract'.
Regarding debugging:
1. I tried to debug in BBP_DOC_CHECK_BADI by calling the FM BBP_PD_CTR_GETDETAIL. inside the badi and the parameter e_header of the function module contained the custom field but had no value...!!
2. I tried to debug the badi BBP_CUF_BADI_2 method MODIFY_INPUT..
The import variable iv_fieldname contains the field name amd the variable iv_value has the value entered in the custom field .........but another import structure ls_header also contains the custom field but no value....
Method MODIFY_INPUT has only one export parameter ev_value,,,,,,,,,,,,,,,,!!!!!!!!!!!!
Edited by: vidya vidya on Apr 24, 2009 6:06 PM -
How does data enter/leave the ni4351(pci) buffer?
I have recently begun using an ni4351(pci) for data acquisition. I'm using VC++ on a Win95 system. I've been digging through the documentation for the ni435x instrument driver, but I can't locate an anwer to the following question: How does the buffer for the analog input scans work?
It's stated in the instrument driver help that if the function to set the number of scans is not called, then acquisition will be continuous. My questions all revolve round the concept of continuous acquisition. I believe that I understand what's going on until i look at the fcns that read/check the acquisition.
What is the purpose of the timeout variable? I undertand its general purpose, but it seems (to me) that we must pass a ti
meout variable to functions that should never time out (e.g. check and read which only returns data that has already been collected).
How is data written into the buffer? is it sequentially added? (e.g. the first data point is buffer[0] and the last would be buffer[999] in a 1k element buffer?) or maybe the most recent acquisition is stored in buffer[0] and older data gets bumped back?
What happens to the data after a read (or check and read) has been performed? is the buffer cleared? does the data keep getting entered sequentially as if nothing has happened?
I apologize if this is in a document somewhere on your site. Thanks in advance for your help.Data is written into the buffer sequentially. The buffer that the data is written to is a circular buffer. When the values are read into your program as an array, the first point that was acquired will be first in your array. The following tutorial explains what going on in hardware during a continuous acquisition:
http://zone.ni.com/devzone/conceptd.nsf/webmain/F2DDCBAD754C687C86256802007B8514?opendocument
I hope this answers your questions, feel free to post again if it doesn�t.
Best Regards,
Doug K
Application Engineering
National Instruments -
Please enter the expiry date in dd.mm.yyyy format
Dear All,
I have configured SAP AA in Dev. Now I want to craete asset master. But it is showing the following error, when I am going to save:
Please enter the expiry date in dd.mm.yyyy format
Can anyone tell me the solution?
Thanks
AzimulThanks Jigar for your reply.
My company is using SAP last 2.5 years. During SAP Implementation, Consultants configured SAP AA, but during testing it showed error in Asset Accounting. That is why, we donu2019t use SAP AA.
Now we want to use Asset Accounting in SAP. I have configured SAP AA in Development. Then I try to Create Asset Master, But it is showing Error:
Please enter the expiry date in dd.mm.yyyy format
I cannot get Error message no also. If I double click on error, it is not opening.
I donu2019t know about Validations. Can u please guide me?
Thanks,
Azimul
Edited by: Azimul on Oct 1, 2011 7:58 AM
Maybe you are looking for
-
Hello, I am currently working on a photo gallery which reads an XML file and load all picture from it. I am doing all by AS3 by adding bitmapdata to the container by loader object. What I want to do is when I add these images they behave like a butto
-
Unable to delete characters in JPasswordField in Custom LnF (PLAF)
I have created a Custom renderer and editor for single Cell *(Not for Single column)* which will show Password, i am able to set the Editor but it is behaving wierdly ? Issue: I am u*nable to delete by using Del / Backspace* , i am only allowed to ap
-
Reflecting the value of the logged in user in an af:inputText Column
Hi I have a Af:table with multiple Rows. In one of my Af:columns I want to reflect the logged in user and store this value when I commit the page. I am using JAZN security. Please Help.
-
I need help i forgot my password
i need help i forgot the password on my ipod what do i do??
-
How to Print Bytes[] from a resultset in a text file? Thanks a Lot!!
Hi all I'm having a prb in printing the Byte[] from a Resultset in a textfile . Every time I exceute this program different values is printing in the text file and in binary format like: [B@29c3,[B@347a,[B@3f2f,[B@49e6,[B@549d and I'm supposed to get