When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?

What you say about Send Later timestamp is correct.
When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
Please voice your vote at this link:
https://bugzilla.mozilla.org/show_bug.cgi?id=560901
You will need to logon/register.

Similar Messages

I accidentally delete all my photo in the "all my files". How could I back up all the photo? (time machine is turn off)

I accidentally delete all my photo in the "all my files".
actually I delete every thing in ALL MY FILES.
How could I back up all the photo?
and other data, such as movies and so on?
Do I need to go to Apple store to back up?
(time machine is turn off)

If you don't have a back up then you'll need to use a file recovery app like File Salvage
To back up iPhoto you make a copy of the Library on another disk.
Regards
TD

TS2755 I have just updated my phone to iso 7 on my wifes i tunes on her computer, now when i send a message to people they get my email address come up and when i need to update it askes for her apple id.. any help please

I have just updated my iphone to iso 7.0.2 on my wifes i tunes on her computer,now when i send a message to people they get my email address come up and when i need to update apps it asks for her apple id... any help please????

ChrisJ4203,
Thank you for the help. Every app on my phone was downloaded using my old I-tunes ID. I just hope that they will re-download under my new ID because I still can't change it on my phone. In order to change to the new ID it says I have to sign out from the old ID and change to the new one. My problem is that I don't remember my password to be able to sign out from my old ID. Then the phone says it can change my password through e-mail and I agree but I never get an e-mail at my old address or the new one.
BHuyett

My daughter does not have an iPhone. I just got the IPhone4. When she receives messages from me they must be downloaded for her to read them. How do Imsend plain SMS messages to a non iPhone recipient?

My daughter does not have an iPhone. I just got the IPhone4S. When she receives messages from me they must be downloaded for her to read them. How do I send her plain SMS messages to a non iPhone recipient?

Well, it could have to do with her phone, however does she have any difficulty in receiving SMS from others? You may want to check how you have iMessage set up. Go to Settings>Messages>Receive at>Make sure your telephone number is listed there, then go to Caller ID, and make sure your phone number is the one with the checkmark by it. You may be sending messages with your email address as the header and if that is so, it may be requiring her to download it as data. See if that helps.

Why is my MacBook Pro slowe when I open it off line to view photo images?

I had recently activated iCloud. I have it set not to copy my photos or data, but only settings and a few other categories. I opened it offline in Preview to quickly view photos on memory cards. I found it slow, with a drop down box periodically flashing open from the top of the screen. It appears to be attempting to copy or save my images. I presume this is to iCloud, though I have it specifically unchecked and do not want it saved to iCloud. I have Dropbox, which I quit, so it is not a factor. I never save my photo images there either. In the past, it was never problem to open and view images with Preview. Now it is extremely slow to open and load images for contact sheet view. All this is recent with the addition of Mavericks and iCloud. Also, I attempted to get out of this by quitting, but had to resort to a forced quit, as it continued to do what it was doing.
Is there a way to be sure iCloud is not copying things and slowing down my computer? Is this a glitch caused by Mavericks?
I have done scans with Sophos Antivirus and it does not appear I have any virus. I have lost all the speed of having a Mac. It is now slower than my old dual core Acer PC. I recently added a Caldigit Thunderbolt dock which has worked great to add USB 3.0 to my early 2011 MacBook Pro which had not 3.0 ability, but this
was bypassed, as my card reader is only 2.0. Any help would be appreciated. Thanks.
<Edited by Host>

I think I have found the source of my problem detailed above. Apparently, there have been problems with Preview running on OS Mavericks, dating back to October 2013, which Apple has yet to acknowledge or address. Many have had similar problems with photo images loading very slowly to the point of making Preview unuseable.
It may also explain problems I have had with flash drives and hard drives that ran on my Mac Book Pro under Lion no longer working since upgrading to Mavericks. I found other postings on these issues.
It is a shame that I have to resort to Google as the best source to identify problems with my Mac and possible solutions. In many cases, it directs me to the source on Apple Support, which is difficult to find when one attempts a search via Apple Support. This could use some improvement.
I am new to using community support sites and Apple does not seem to provide simple, clear directions on how to get started. Jumping in with both feet, not only did I get wet, but I apparently "splashed" someone, as I got a hostile response from another community member on the first issue ever posted. I never did get an answer to the problem, though. I hope some find these comments helpful.
Oh, and wake up, Apple. We all would hope you monitor and glean information from these postings and act promptly to remedy problems with OS Mavericks.
Message was edited by: MikeMacBP2011

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

I use message and all other messages are non-sms. When I try to message these two accounts, they automatically use sms, everything I do is the same. The non-sms messages go through just fine (including pictures). The sms messages (no pictures) are always rejected; they have never gone through. They have never been able to send messages to me either (although they can send to others). I have a Verizon cellular data plan.

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have iPhoto 11, 9.4.1 installed. When my library was upgraded, I got a message the photos couldn't be imported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no longer drag them to the photo stream.

I have iPhoto 11, version 9.4.1 installed. When my library upgraded, I got a message that the photos couldn't be inported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no oonger drag them to the photo stream.

Disable Photo Stream in iPhoto's preferences and then go back and reenable it. See if that will jump start the process. If that doesn't help try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto check its preferences to meka sure all is as you expect and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

HOW TO SEND PERSONALIZED EMAILS (WITH SAME MESSAGE) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR NAME BUT NOT WHO ELSE IS GETTING IT

HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?

In the csv file, the column headers must match the the special references in curly brackets.
So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
To change the column header:
In the example shown below, I wanted to use the first two columns
'First Name', 'Last Name' note the exact spelling.
I also wanted the email address which was in a column called 'Primary Email'.
To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
At this point check that all the contacts do have a valid email address.
then save the file.
If you do not want to edit the .csv file, then you need to edit the template email.
eg: {{First Name}} {{Last Name}} <{{Email}}>
change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
If still having an issue, please post two images.
One image needs to show the row of column headers used in .csv file.
The other image needs to show the Template email, so I can see how you have used the curly brackets.

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see:
How to reset forgotten Restrictions...: Apple Support Communities

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
-----

I can not receive messages and i can't send messages also if someone rings me it, it rings at their end and then goes to voice mail but nothing at my end

i can not receive messages and i can't send messages also if someone rings me it, it rings at their end and then goes to voice mail but my phone doesn't ring

Talk to your carrier. Sounds like something is not provisioned right on your account.

When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

What can I do when I try to access a URL and get the message "MAC OSX doesn't recognize internet addresses starting with "c:"?

I recently tried to download a pdf file from a website in the UK. Up popped a message saying the website could not be accessed, followed by this message: "MAC OSX doesn't recognize internet addresses starting with "c:". I was able to access the website easily (its domain was "www") and the page listing the pdfs, but could not download a pdf. Of course," c:" appears not to be a valid domain name, but why would anyone use "c:" in place of a domain name in their URL? And what can I do about the problem? I'm using Snow Leopard 10.6.8 and Safari 5.1.10, but also have Firefox and Chrome loaded. Thanks.

An address starting with c: wouldn't be any kind of domain name. C: is the drive lettering system DOS and and later uses. By default, A: and B: are reserved for your first and second floppy disk drive. All hard drives are then named C: through Z:, if you have that many. C: is normally your startup disk.
Anyway, their PDF file is incorrectly linked to a file directly on the C: drive of someone's computer. It's not going to work no matter what you do.

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

Similar Messages

Maybe you are looking for