Entire Payload in Alert

Hi Experts,
I have a requirement where i want the entire message payload in the alert when the message fails due to structural incompatibilities, I have got dynamic fields based on Michal blog, but i was keen to find out if its possible to send the entire payload .
Regards,
RK
Edited by: Rupash Krishna on Mar 23, 2009 12:26 PM

hi please go throug the below link..
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
here he is using the UDF to send the alert..
here u need to create ur won container variable and map the payload to this container veriable ..
and in alert category use this container variable in long text.....
alert from payload is very much possible....
regards, navneet

Similar Messages

Accessing entire payload to map to a target field

Hi,
     We are working on a scenario where in we need to map the entire payload (along with the xml tags) to a field in the target message structure.
     We explored few options like java mapping wherein we get the entire payload as an input stream , also tried to change the approach with sending the payload as attachment and then making it available for mapping using custom module.
     Request all to please come up with suggestions as to whether this can be done using graphical mapping or xslt mapping.
Thanks,
Pravesh Puria.

Use of mapping would depend upon the way u provide the input.
For graphical mapping, access the payload in UDF.
For xslt mapping, only when ur sender structure is a made with a single element, u can achieve this.
If u r sending an xml file with many tags, then to use it as a single field, go for Java mapping
Regards,
Prateek

Payload in Alert Message

Dear Friends / Experts,
I have a requirement wherein we need to send the alert via email.
Subject / Message Body of the email need to contain the Payload - SalesOrder Number.
Is it possible to achieve this without the use of BPM?
Thanks in Advance
Raghu

I need o ensure if the variables in containe of the alert catgory can refer to payload of the message?
no you cannot refer to the payload using the existeing alert container variables....to know what each variable does check this section:
http://help.sap.com/saphelp_nw70/helpdata/EN/d0/d4b54020c6792ae10000000a155106/frameset.htm
Did you forgot to mark this thread as Question??
Regards,
Abhishek.

IDOC Number from payload in Alerts with out BPM

Hi Everybody,
I need to send the IDOC Number as Alert for the user.
Is it possible to do with out BPM either by Alert Frame Work or CCMS?
Is there any alternative way to capture the Idoc number and display for the erroneous messages?
Helpful Answers will be rewarded points.
Thanks,
Zabi

Yes,
You can also do it via alerts.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly. or from UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
Br,
Madan Agrawal

Xi Alerts - Can a field in the payload be a part of the alert message?

Hi All,
I have a requirement in my alert configuration wherein a specific field in the message payload needs to appear in the Alert message. In the std configuration I see field containers for std things like message ID, services etc... but how do i pass payload fields in the alert
I am on Xi 3.0 Sp20... this a rfc to jdbc sync scenario... and we are not using BPM...
Regards,
Arvind

Hi,
you can send the fields of the payload in alert using the RFC call SALERT_CREATE...where you can the payload value...
you can call the RFC at the mapping level only like lookup or using some udf based on the field validaation.
but for standard cases you cannot....
HTH
Rajesh

### in XI Payload

Hi Experts,
We are facing a critical issue in our productive environment.
The output after mapping in XI has the character '#' filled up completely meaning the entire payload is filled with '#'
We have a multicluster server environment and this might be happening in few server nodes.
Any inputs on this would be highly appreciated.
Regards,
Varun.
The issues are below.
1. All receivers with enhanced receiver determination could not be determined and XI is processing #### values to all subscribing systems.
2.. #### are being filled just after mapping.
3. We are not sure if this is the case on one server node or with all server nodes.
4. On recommendation, we recently upgraded JVM of our system to resolve this particular issue but the issue stil persists.
Edited by: Varun on Mar 4, 2010 5:07 PM

Hi Varun,
Can you plesae let me know that # you are getting in the Receiver payload ? if it so then you can use java mapping for this.
use this java code only any edit ur logic for ur req
package com.agr.test.replacechar;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import java.util.HashMap;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformationException;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
public class ReplaceAmpersnd implements StreamTransformation {
     private Map           param = null;
                    private AbstractTrace trace = null;
                    public void setParameter (Map param)
                         this.param = param;
                         if (param == null)
                              this.param = new HashMap();
                         else
                              trace =(AbstractTrace) param.get(StreamTransformationConstants.MAPPING_TRACE);
     public void execute(InputStream in, OutputStream out) {
     try {
     int read_data;
     while ((read_data = in.read())!=-1)
     if (read_data != '&')
          out.write(read_data);
     else
     out.write("".getBytes());
     out.flush();
     catch (Exception e)
          trace.addWarning("Error " + e.getMessage());
Regards
Abhay
Edited by: Abahy Aggarwal on Mar 5, 2010 1:48 PM

Want to send the Sales Order No in Alert message

Hi,
my scenario is IDoc to File. suppose due to sme validations my message got failed in any where. immediatley I'm sending an Alert to End User . But as per the prsent devolopment End user is not understaning that which Sale order got failed. End user is not capable to open the Hyperlinks of the message monitoring . So, user is asking to send the Sales order no inside the Alert message (Mail) .
is it possible to send the message content also inside the Alert Message (Mail)
Regards
Jain

is it possible to send the message content also inside the Alert Message (Mail)
Since the salesorder number comes from the payload....you need to introduce a BPM here....there is no other option than this to get a value from payload into alert message..
There is a blog by Michal explaining the same....please check...if i get it will update the same:)
this is the blog i am talking about....check if it helps you..
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Regards,
Abhishek.
Edited by: abhishek salvi on May 7, 2009 8:09 PM

Java code to add message to existing payload

Hi,
See the below links may be useful...
Sender mail adapter - PayloadSwapBean - Step by step -/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
SAPconnect - The Interface in the R/3 System for E-Mail/Fax Systems -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b4fa090-0201-0010-d3b7-b233296d95ff
Also you can use the alert management and configure the scot and use the sender spicific , mail address in user by su01, and finally raise an alert from payload .
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Regards
Chilla

Dude,
an attachment is like another payload in the same message (which has a main payload). It is not like your scenario.
You don't need a custom module at all for that. Just go for message mapping.
And if you do want to implement a full XML Digital Signature compliant signature field (as described in http://www.w3.org/TR/xmldsig-core/), refer to the Digital Signatures and Document Encryption API:
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/65c3b32107964996a56e4165077e24/frameset.htm
In this case you'll need a java mapping or a custom module (java mapping is way easier, tho) to perform the signature, as described in the example:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm
Regards,
Henrique.

Alert Framework : Adapter Engine

Hi Everybody,
I am working on an Idoc to SOAP Scenario.
The requirement is to raise alerts whenever there is a failure at the SOAP receiver adapter.
In the Alert message (adapter engine failure) I need to pass the Idoc Number from the payload.
Is it possible to pass the fields from payload as Alerts (I mean only adapter engine).
I have already reffered Blog from Micheal.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
I don't think the above procedure in the blog can capture payloads and alerts at adapter engine.
Is it possible to achieve this?
Can somebody help me out if there is any solution?
Request only relevant replies.
Helpful Answers/solution will be rewarded points.
Thanks,
Zabiulla

Hi Zabiulla,
>Is it possible to raise for the Adapter level Exceptions
Yes, choose
conditions Connected to message: Not Relevant and
any conditions on Receiver
Select at area "Where did the error occur" Adapter Engine
You cant store dynamic values in the alert, this is only from BPM possible, so you wont have a IDoc number, but if you check on "Dynamic text" in the alert category, you will have automaticly a link in the alert to the right message of RTW monitoring.
Regards,
Udo

Close a Group of Alerts at Once?

I have the Mail app in Notification Center set to provide alerts for new mail. In the morning I frequently have an entire set of alerts piled up on the right side of my screen. This is helpful, as I can scan them and choose some to reply to. However, it's a drag to sit there and click "close" over and over and over again to remove these alerts. In Mavericks the pause between the closing of an alert and the next one coming up is even slower than ML.
So I am wondering if there is a way for me to close all alerts with one click. I have tried an Option-Click on a close button, and other combinations of keys. All the alerts are Mail alerts, so it has seemed to me that such a combination should exist which would close all alerts of a certain kind.
Does anyone know of a way to do this?

You are probably overwhelming that little laptop.
Why not break things up into multiple batches.
Create batch. Import 30 clips. Apply preset. Submit.
Create new batch. Import 30 clips. Apply preset. Submit
rinse and repeat.
After one batch is complete, compressor will start in on the next.
It will still finish in the same period of time and you won't have the crashing from the thumbnail problem (my quess).
x

Junk Charecters in alert mails

Hi,
We are facing a weird problem. We have created a alert category, and have defined long text as below :
Dear Reader,
Please find the below details of the error occured in SAP PI system:
SENDER SYSTEM: &SENDER&
RECEIVER: &RECEIVER&
MESSAGEID: &MESSAGEID&
Please go to the transaction SXMB_MONI_BPM to see the error message details.
This message was automatically generated. Sent by SAP PI system.
PLEASE DO NOT REPLY TO THIS EMAIL.
Regards,
SUPPORT TEAM
But in the alert mail we are getting junk characters as below :
Content-Type: TEXT/PLAIN; Charset="ISO-8859-1"
Content-Transfer-Encoding: QUOTED-PRINTABLE
Dear Reader,
Please find the below details of the error occured in SAP PI system:
SENDER SYSTEM: TestSender
RECEIVER: ErrorNotify
MES SAGEID: 9EFB9093-F36A-11E3-CA75-0000006D18B6
Please go to the transactio=
n SXMB_MONI_BPM to see the error message details.
This messa ge was automatically generated. Sent by SAP PI system.
PLEASE DO NOT REPLY TO THIS EMAIL.
Regards,
SUPPORT TEAM
we are really confused where we have gone wrong
Thanks in advance,
Arun

Hi,
You can achive it by using simple UDF...check the blog..
/people/samuel.chandrasekaran2/blog/2008/10/06/xi-mail-adapter-dynamically-building-attachment-and-message-body-content-using-a-simple-udf
Also go through this thread...
Re: ..Payload in Alert message
Regds,
Pinangshuk.

Creating a cfhttp multi part form post for google docs upload

Hey all,
If you saw my last thread, you know I am working with google docs and uploading documents to it. Well I got basic document uploading working, but now I am trying to include meta data. Google requires you to include the metadata with the actual file data and seperate them by using a multi part form upload. I don't know exactly the process for doing so, but they have a handy code snippet of the desired results at
http://code.google.com/apis/documents/docs/3.0/developers_guide_protocol.html#UploadingDoc s
So I am basically trying to mimic that payload, however I am continually getting an error stating that there are no parts in a multi part form upload.
<errors xmlns='http://schemas.google.com/g/2005'><error><domain>GData</domain><code>InvalidEntryException</code><internalReason>No parts detected in multipart message</internalReason></error></errors>
to be exact. I am not really sure what I am doing wrong here. I figure it is one of two things, either I am not including the actual data in the payload properly (I am currently using a body type param for the payload, but I have also tried a formfield named content to deliver it. Neither worked). So maybe I need to do something else tricky there? The other thing which I am not reallly sure about is the content-length attribute. I don't know exactly how to calculate that, and I read in another forum that a content length attribute was messing that guy up. Right now I am just taking the lenght of the payload string and multiplying by 8 (to get the number of bytes for the entire payload) but hell if I know if that is right. It could be I just don't know how to set up the parts for the message, it seems pretty straight forward though. Just define a boundary in the content-type, then put two dashes before it wherever you define a new part, and two dashes trailing the last part.
Anyway, here is my code, any help is much appreciate. I'm a bit beyond my expertise here (not really used to trying to have to roll my own http requests, nevermind multipart post form data) so I'm kinda flailing around. Thanks again.
<cffunction name="upload" access="public" returnType="any" hint="I upload the document." output="false">
    <cfargument name="filePath" type="string" required="false" hint="file to upload.">
    <cfargument name="docType" type="string" required="yes" hint="The document type to identify this document see google list api supported documents">
    <cfargument name="parentCollectionId" type="string" required="no" hint="the name of the collection/collection to create (include collection%3A)">
    <cfargument name="metaData" type="struct" required="no" hint="structure containing meta data. Keyname is attribute name, value is the value">
    <cfset var result = structnew()>
    <cfset result.success = true>
    <cftry>
        <cfif structkeyexists(arguments,"parentCollectionId")>
                  <cfset arguments.parentCollectionId = urlencodedformat(parentCollectionId)>
                  <cfset result.theUrl = "https://docs.google.com/feeds/default/private/full/#arguments.parentCollectionId#/contents">
            <cfelse>
                    <cfset result.theUrl = "https://docs.google.com/feeds/default/private/full/">
        </cfif>
         <cfoutput>
              <cffile action="read" file="#arguments.filePath#" variable="theFile">
            <cfsavecontent variable="atomXML">
                 Content-Type: application/atom+xml
                <?xml version='1.0' encoding='UTF-8'?>
                <entry xmlns="http://www.w3.org/2005/Atom" xmlns:docs="http://schemas.google.com/docs/2007">
                  <category scheme="http://schemas.google.com/g/2005##kind"
                      term="http://schemas.google.com/docs/2007###arguments.docType#"/>
                    <cfloop collection="#arguments.metaData#" item="key">
                        <#key#>#arguments.metadata[key]#</#key#>
                    </cfloop>
                </entry>
                --END_OF_PART
                Content-Type: text/plain
                #theFile#
                --END_OF_PART--
            </cfsavecontent>
        </cfoutput>
        <cfset result.postData = atomXML>
        <cfhttp url="#result.theUrl#" method="post" result="httpRequest" charset="utf-8" multipart="yes">
            <cfhttpparam type="header" name="Authorization" value="GoogleLogin auth=#getAuth()#">
            <cfhttpparam type="header" name="GData-Version" value="3">
            <cfhttpparam type="header" name="Content-Length" value="#len(trim(atomXML))*8#">
            <cfhttpparam type="header" name="Content-Type" value="multipart/related; boundary=END_OF_PART">
            <cfhttpparam type="header" name="Slug" value="test file --END_OF_PART">
            <cfhttpparam type="body" name="content" value="#trim(atomXML)#">
        </cfhttp>
        <cftry>
               <cfset packet = xmlParse(httpRequest.fileContent)>
            <cfif httpRequest.statusCode neq "201 created">
                <cfthrow message="HTTP Error" detail="#httpRequest.fileContent#" type="HTTP CODE #httpRequest.statusCode#">
            </cfif>
            <cfset result.data.resourceId = packet.entry['gd:resourceId'].xmlText>
            <cfset result.data.feedLink = packet.entry['gd:feedLink'].xmlText>
            <cfset result.data.title = packet.entry.title.xmlText>
            <cfset result.data.link = packet.entry.title.xmlText>
            <cfcatch>
                 <cfset result.data = httpRequest>
            </cfcatch>
        </cftry>
        <cfcatch type="any">
             <cfset result.error = cfcatch>
            <cfset result.success = false>
        </cfcatch>
    </cftry>
    <cfreturn result>
</cffunction>
Also, this is what my atomXML data ended up looking like when it got sent to google. This isn't the WHOLE request (it doesn't include the headers, just the body).
Content-Type: application/atom+xml
<?xml version='1.0' encoding='UTF-8'?>
<entry xmlns="http://www.w3.org/2005/Atom" xmlns:docs="http://schemas.google.com/docs/2007">
<category scheme="http://schemas.google.com/g/2005#kind" term="http://schemas.google.com/docs/2007#document"/>
<TITLE>Woot Test</TITLE> </entry>
--END_OF_PART
Content-Type: text/plain
I'm a test document lol!
--END_OF_PART--

Woot, I got it. I had to send the gData version number, and change the URL.
Here is the working function.
<cffunction name="upload" access="public" returnType="any" hint="I upload the document." output="false">
    <cfargument name="myFile" type="string" required="false" hint="file to upload.">
    <cfset var result = "">
    <cfset theUrl = "https://docs.google.com/feeds/default/private/full">
    <cffile action="read" file="C:\website\xerointeractive\testing\test.txt" variable="theFile">
    <cfset fileSize = createObject("java","java.io.File").init("C:\website\xerointeractive\testing\test.txt").length()>
    <cfhttp url="#theURL#" method="post" result="result" charset="utf-8" >
        <cfhttpparam type="header" name="Authorization" value="GoogleLogin auth=#getAuth()#">
        <cfhttpparam type="header" name="Content-Type" value="text/plain">
        <cfhttpparam type="header" name="Slug" value="test file">
        <cfhttpparam type="header" name="GData-Version" value="3">
        <cfhttpparam type="header" name="Content-Length" value="#fileSize#">
        <cfhttpparam type="body" value="#theFile#">
    </cfhttp>
    <cfreturn result>
</cffunction>

HTTP to File with source XML validation

Hey guys
i have a HTTP to File scenario wherein i m getting XML over HTTP from an external system.i need to perform a validation check on this payload and if the check fails then i need to send this payload as a mail attachment to a certain address,if check is successful then i need to post this XML to the File server.
i have done simple scenario without any validation but now i need to upgrade and perform validations,do i need to do that in Message mappin?
some links will be really helpful
thanx
ahmad

Hi,
I hope the following two ways are possible.
1)
Maintain one message as source and two messages as target.One is actual message and second one message structure should containt the structure with error details with source details.
Validate the message in MM with UDF.
If the source is valid then assign the msg to correct target messages.and ResultList.SUPPRESS to suppress the second message
Else then assign the error details with source details to second message.and ResultList.SUPPRESS to suppress the first message
Be sure that the target messages occurrences are 0..unbound or 0..1
then use the IM in interface determination.
and maitain two CCs one for actual receiver, second for MAIL receiver with HTTP attatchment.
2) You can raise an alert from payload. in alert you should maitain the mail, su01 mail id , designated reciept.
See the below links
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
Regards
Chilla

Error while inserting data in SQL Server.

Hi',
I am using SOA 11.1.1.5
I am inserting data using DB adapter in MS SQL Server. Some times I get below error.
Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID rrr/xxx!1.1*soa_313bd437-7bb9-41c6-a719-d1775b9afc4b/xx/4115908-BpInv0-BpSeq1.6-4
Fault Time Dec 24, 2012 8:02:09 AM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertIntoStagingxx.Stagingxx]. Caused by java.sql.BatchUpdateException: String or binary data would be truncated.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-8152" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>String or binary data would be truncated.</detail></part><part name="code"><code>8152</code></part></bindingFault></bpelFault>
Please advice.
Thanks
Yatan

Hi Yatan,
This should be due to data issues. And the error message is due to data truncation issues.
Please check your payload that you are trying to insert into the SQL server table.
One or more fields might have a data that is exceeding its defined length with respect to the table definitions.
Problem with using SQL server is that while inserting, you will not be pointed towards which field or column is causing the error.
You have to take the pain of searching through the entire payload to find the problem causing ones.
Thanks,
Deepak.

PL SQL Web Service with XML output - Remove the declaration from the proces

Using JDeveloper to create PL/SQL web services it inserts the generic declaration
<?xml version="1.0" encoding="UTF-8" ?>. I want to remove this line from the payload.
Here is the entire payload. Why is this inserted and how do I get rid of it.
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <SOAP-ENV:Body>
- <SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Server.Exception:</faultcode>
<faultstring>java.sql.SQLException: java.sql.SQLException: ORA-04068: existing state of packages has been discarded ORA-04063: package body "FDC_API.PVR_IPS_TICKET" has errors ORA-06508: PL/SQL: could not find program unit being called ORA-06512: at line 1</faultstring>
<faultactor>/pvr_ora-pvr_tickets-context-root/Pvr2ips</faultactor>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>rvice, my payload has the

We can generate jaxws from 11.1.2.0 onwards using This is now provided by the TopLink web service provider builder, which can be via the TopLink DBWS provider wizard from JDeveloper since the 11.1.2.0.0 release
1.4.4 Database Web Services (DBWS)
http://docs.oracle.com/cd/E23943_01/doc.1111/e26045/general.htm#CHDIEEHG
Hope that heps
Regards,
Sunil P

Entire Payload in Alert

Similar Messages

Maybe you are looking for