Alert Framework : Adapter Engine

Hi Everybody,
I am working on an Idoc to SOAP Scenario.
The requirement is to raise alerts whenever there is a failure at the SOAP receiver adapter.
In the Alert message (adapter engine failure) I need to pass the Idoc Number from the payload.
Is it possible to pass the fields from payload as Alerts (I mean only adapter engine).
I have already reffered Blog from Micheal.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
I don't think the above procedure in the blog can capture payloads and alerts at adapter engine.
Is it possible to achieve this?
Can somebody help me out if there is any solution?
Request only relevant replies.
Helpful Answers/solution will be rewarded points.
Thanks,
Zabiulla

Hi Zabiulla,
>Is it possible to raise for the Adapter level Exceptions
Yes, choose
conditions Connected to message: Not Relevant and
any conditions on Receiver
Select at area "Where did the error occur" Adapter Engine
You cant store dynamic values in the alert, this is only from BPM possible, so you wont have a IDoc number, but if you check on "Dynamic text" in the alert category, you will have automaticly a link in the alert to the right message of RTW monitoring.
Regards,
Udo

Similar Messages

PI Email Alert Configuration - Multiple Alert in Adapter Engine

Hi,
My SAP PI alert emails are now working. However, when I get an error in the Adapter Engine (RWB),MULTIPLE OF EMAIL ALERTS are being sent. When an error occurs in Integration Engine, only 1 email alert is sent.
For the Adapter Engine Alert Rule, i have checked the 'Suppress Multiple Alerts of This Rule' and i didn't receive any emails, but when I unchecked it, i receive multiple emails.
im using PI7.1 SP08. is there an effect because my SP is not updated?
thank you.

HI Indrajit,
thanks for the response.
i have checked the 'Suppress Multiple Alerts of This Rule' but i am not receiving an alert message. The error occurred in the RWB Adapter Engine. However, if i uncheck the 'Suppress Multiple Alerts of This Rule', i am receiving multiple alert messages.
Is there an additional configuration?
thank you.

Alert for adapter engine error

Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachi

Moha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish

CCMS Alerts in PI 7.1 for adapter engine

Hi Experts,
Looking for a step by step process to configure CCMS alerts for adapter engine in PI 7.1

Hi Shweta,
>>>Looking for a step by step process to configure CCMS alerts.
Please see the belog blogs, it might be helpful to you.
Part u2013 1:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Part - 2:
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Part - 3:
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Mar 22, 2011 12:58 PM

Adapter Engine Alert

Hi,
I have set up the alert configuration and I am receiving all the alerts for intergeration server but when I raise any alert for adapter engine.. I am not receiving anything. Is there anything special needs to be done for the same.
Please Help ! ! ! !
Regards
Ria

Hi,
When you create the Alert Rules, create a separate Alert Rule for the Adapter Engine errorrs.
In where did the error occur in the alert rule, select Adapter Engine and make the adapter type as ALL.
To forward alerts to an Email Id, this is what you need to do,
1. Assign the Email Id to the recipient of the Alert in SU01.
2. Go the Alert Inbox of the recipient in RWB , Personalization --> Time Independent Delivery -->Email.
3.If SCOT has been configured, for every Alert sent to the Alert Inbox of the user, the Alert Email will now be triggered.
4.Text of the mail will be the Long Text defined in ALRTCATDEF.
The specified item was not found.

Communication channel monitoring (adapter engine) in ccms (rz20) available?

Hi,
we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
There sometimes errors disappear. At the moment these errors accumulate!
Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
So we don't look all the time in the communication channel monitoring!
Have anybody an idea?
Regards,
matthias isenburg

Have u seen the discussion
Re: How do I configure an auto-email alert for Adapter engine errors
Regards,
Prateek

Alerts as adaptor engine level

Hi
I have configured the alerts and they are working fine like "mapping error" . Now i want to configure the alerts at adapter engine level like login prob , communication prob, JDBC adaptor error etc
Any clues!!!!!!!!!!!!!!11
Thanks in advance
Regards
Vijay

Alerts are triggered for adapter level errors also, if you are on SP 14 and above. No spl config required for this.
Regards,
Jai Shankar

Adapter Engine - Alert Framework - Suppress Multiple Alerts

Hello,
I use XI in SP14.
I have configured the alert framework with rules for "Integration Engine" and for "Adapter Engine". I have check for the two cases the option "Suppress Multiple Alerts of This Rule".
For the same error (for example, mapping error) the option "Suppress Multiple Alerts of This Rule" works fine for the rules based on the "Integration Engine", but for the rule based on the "Adapter Engine" the option "Suppress Multiple Alerts of This Rule" doesn't work. For example i have a sender file adapter which reads some files on a nework directory (polling every 5 secondes) and if we have a network failure, i will receive several times the same email from the Alert Framework. Is it normal or a bug ?
Regards,
Vincent

Hi,
Yes they have been faced before.
refer this thread,
Bunch of problems with ALERTING in SP14!
Question6 refers to supress multiple alerts.
Also refer oss note 913858 - XI 3.0 Alerting: Troubleshooting
Hope this helps you, also try sp15 and if that donot work try the note.
All the best,
Anirban.

Alerts in the Adapter engine

Hi all
I´m working in a BPM scenario, I have raised an alert from the BPM and it arrives to my inbox(alert framework). And also i can see it in the CCMS. But now I trying to configure an alert to be raised in case of an error in the Adapter engine (file adapter). I´m on sp15 and i have create a alert categorie and an alert rule setting this with the value Adapter engine and the adapter type File.
I have checked the alert with "RSALERTTEST" and it works fine it arrive to my alert inbox and to the ccms. But i have an error in the file adapter and is not arriving anything. The communication channel is a Sender. There is some thing missing in my configuration?
Any help please?
Regards
Noelia

Here are my hints:
1) http://help.sap.com
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
2) Michal's blog: XI FAQ
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
XI: Alerts - Troubleshooting guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
3) Notes:
750287 XI 3.0 Runtime Workbench: Alert configuration does not start
768456 Troubleshooting Runtime Workbench XI 3.0
813703 XI RWB alert configuration is incompletely displayed
840849 XI 3.0 Runtime Workbench: SSO2 is not active in this system
824039 XI30 Runtime Workbench: Display of XI alerts in CCMS
0000906044 XI30 Alerting: Wrong hostanme in the URL of the XI Alert
0000905896 XI30 Alerting: Message without recipient creates no alert
0000904825 Synchronous message processing: Error in CCMS connection
0000902022 XI30 Alertrule insensitive to Receiver Interface
0000882215 XI 3.0 Runtime Wkbnch: Java Adaptr does not generate alerts
0000876546 XI 3.0 Runtime Workbench: Missing alerts
0000870232 XI 3.0 Runtime Workbench: New Alerting functionality
But start with this one:
913858 XI3.0 Alerting: Troubleshooting
4) User roles
SAP_ALM_CUSTOMIZER -- Alert Management: Role for Customizing
SAP_ALM_ADMINISTRATOR -- Alert Management Administrator
SAP_BC_ALM_ALERT_USER -- ALM: Role for the alert user
SAP_BC_ALM_ADMIN
SAP_BC_ALM_CUST
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Regards,
Sandro

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

Alerts in Adapter Framework not sending emails - PI 7.1 SP 7

Hi All,
I am on PI 7.1 SP 7. I have created Alert Category for Adapter Errors, but they are not delivering any emails. I have checked the logs in SXMSALERT_LOGREADER. It says the following
Alert Category <ALRT_NAME> in rule Adapter Exception not yet confirmed. Skip creation of new Alert.
Rule Active - Yes
Suppress Multiple Alerts - Not Checked
Connected to Message - No
So all other parameters are '*'
Adapter Engine is checked.
Can anybody please help?
Thanks,
Geetha

Heyy,
Check the same Discussion here
Alert Category in rule not yet confirmed.
Re: Alert is not triggered
Regards

Adapter Engine alerts: Error in Adapter Engine

Hi All,
I have configured Alerts for <b>Adapter Engine</b>.
I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
This error comes just <b>momentarily</b> and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
I am not able to figure out the reason for this exception.
Expecting your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi,
This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
reward if helpful.
Thanks,
sarath.

Adapter Engine Alert Error

hi team
I have developed Adapter Engine Alerts and i have received an Error. when i checked ion the message monitor and also in the communication chhannel monitoring the following error is being displayed
" Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: No transition found from state: ERROR, on event: process_commence for DFA: Receiver communication chhannel:5601afa75060350a8aae48e821307ba3"
the Receiver communication chhannel is in red colour
please help me out
thanx in advance

Check
How to deploy 3rd party drivers in PI 7.1
SAP Note: 1138877
/people/michal.krawczyk2/blog/2010/03/17/pixi-deploy-a-jmsjdbc-driver-without-jspm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60237e74-ef19-2b10-5a9b-b35cc6a28e83?quicklink=index&overridelayout=true
Which version of PI r u using?
chirag.
Edited by: Chirag Gohil on Jul 27, 2010 1:28 PM

Adapter engine Error not caught in alert rule &alert category

Hi All,
I have cretaed my alert rule as follow.
Conditions
      Connected To Message ; Not Relavant
       Sender Service   : *
       Sender Interface : Test_OB
       Sender NameSpace   :urn:abc.com
       Receiver party : *
       Reciver Service:*
       Receiver Interface : *
       Receiver Namespace:*
Where did the error occur
    No restriction.
When i tested this alert rule, mails are getting triggered for Integration engine alerts. But when messages fails in adapter engine, i am not getting any alerts/mails at all. Why this happens?
How should i debug this?

Check this for troubleshooting: /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Also the alert should be raised in Adapter Engine for Test_OB as source interface.
Uncheck Suppress Multiple Alerts of This Rule checkbox.
Regards,
Abhishek.

Alert Framework : Adapter Engine

Similar Messages

Maybe you are looking for