Entourage error message 4362 - damaged data base - cannot back up , compact

I've been using 10.5.8 on my G5 for 2 yrs NO problems - THEN - error message 4362 starts to appear as Entourage (2004 Office) gets close to 1.5G bytes. Disk utility can run and verify YES there is a damage in data base.
BUT the rebuild option will NOT last more than 30secs before I/O error.
I have tried to open Entourage with option key down and I have thrown out any email older than 1yr.
Next move is to re-install Entourage - and import folders - unless some one has a better idea/solution. Please -- Ray

Hi Ray,
http://www.entourage.mvps.org/error/number.html#error4362
See if the above helps before you remove and then re-install MS Office.
Da Vinci

Similar Messages

  • When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

    0x8004010F: The operation failed. An object could not be found.
    1. reviewed Profile instructions
    2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst 
    3. Back to Profile Instructions.
    4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
    and  gmail address PST.  Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
    5. Set up another new profile with my email address and a named pst.  Run Outlook under that Profile -
    comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile.  Tried different approaches and still ended up always with the gmail address pst.  Deleted
    all profiles but email address and comes   up.
    6. Should I just go ahead and use the gmail address pst  I need to import data or download data from gmail
    to get last years correspondence.e
    7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
    Help?
    8. One option is to merge psts but might make worse mess.
    Thanks.  Beautiful Beach weather here!

    To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
    Step 1- Locate the default Outlook data file
    Click Start, and then click Control Panel.
    In Control Panel, click Mail.
    In the Mail Setup - Outlook dialog box, click Show Profiles.
    Select your current Outlook profile, and then click Properties.
    In the Mail Setup - Outlook dialog box, click Data Files.
    Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
    Click Close.
    Step 2 - Create a new Outlook profile
    Step 3 - Configure your new Outlook profile as the default profile
    More detailed steps you can refer to this KB article:
    http://support.microsoft.com/kb/2659085

  • Evert ime i close a pdf i get the following message - rthe orgnizer data base is damaged and will be reset the next time acrobat is launched but after relaunching i still get the same message

    every time i close a pdf i get the following message - the orgnizer data base is damaged and will be reset the next time acrobat is launched but after launching
    i still get the same message

    You must be using an old version of Acrobat as Organizer hasn't been in the last two versions of Acrobat.  Here is the KB that covers that old error:  Error "The Organizer Database is damaged and will be reset..." | Acrobat 9

  • Error message the file "itunes.itl" cannot be read because it was created by a newer version of iTunes.

    I had to do a system recovery with a prior date.  now I get an error message: the file "iTunes.itl" cannot be read because it was created by a newer version of iTunes.  Anyone have a solution?

    I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
    So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
    PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

  • Received error message Microsoft Word starter 2010 cannot be opened. Try again or repair the product

    I received an error message today in the click-to-run application manager box that read: Microsoft Word Starter 2010 cannot be opened. Try again, or repair in control panel. At this point nothing seems to work. HELP.

    if you bare receiving error message Microsoft Word starter 2010 cannot be opened. For this you need to make use of MS Word Repair Tool.  Word File Repair Tool which is especially designed to repair and recover corrupt or inaccessible (.doc) and (.docx) files back. It extracts the content from the file and rebuilds a new healthy word file that you can access easily. It effectively recovers document texts along with its other important stuffs like indentation, formatting, charts, hyperlinks, images, tables etc. This powerful tool even repairs the severely damaged DOC files in seconds and save you from great disaster in work. So just download DOC Repair Tool straight away and repair & restore your Word files in seconds. 

  • .itl error message: The iTunes Library file cannot be saved...

    Does anyone know what causes this error message: "The iTunes Library file cannot be saved. A folder was specified instead of a file."
    Long story short, I am tranferring my library to a new computer. On the old computer (XP, iTunes 10) it referenced the library from an external hard drive. On the new computer (Windows 7, iTunes 10) it references the C drive (my choosing). I put the iTunes Library folder onto C/Libraries/Music/iTunes/I manually put the .itl file in C/Libraries/Music/iTunes, and it worked (all of the playlists and file data were retrieved successfully). But then iTunes starts giving me that error message, and the .itl dissapears from C/Libraries/Music/iTunes. Then when I try to reopen iTunes I get this message: "The iTunes library .itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder.
    Why is iTunes having trobule saving the file? Or do I need to somehow mondify the .itl so that it is functional in this new location (on the old computer it was in a differen folder. THanks for any insight.

    Hi,
    I got to messing around in the iTunes folder and now NOTHing is visible in my iTunes Library. I had made a backup of the ~\My Music\iTunes folder before I messed with anything and so deleted the entire iTunes folder. Then I restored it from the backup. There is still NOTHing in my library.
    I can import one item at a time but it's impractical to do it that way due to the volume of music. How can I import All of my music into the library? Is there a way to import an entire directory, consisting of sub-directories and their music - into the library?
    Thanks very much.
    Mike

  • I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019).

    I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019). I am trying to put albums on to my ipod by dragging and dropping. I have it set to manually manage music and videos. The albums appear in the music section under Devices, but they don't appear on my actual ipod.
    I have never had any problems doing this before, only in the last few days.

    I am having the exact same issue as you are with my iPod nano. This started happening the same day after I updated the iPod software, so I wonder if it is a bug within the software that Apple needs to resolve. I dragged 3 playlists of new music from my iTunes over to my iPod and sometime while it was trying to add those songs, the error 13019 popped up. Another note, which may not be related at all, was that iTunes told me at some point during this process (I believe before the error notification, but I'm not sure and that may be helpful to know) that I did not have enough room on the iPod to copy all of the songs, but it would copy as many as it could. What is curious, like in your situation, is now all the songs it supposedly copied appear to be on the iPod under the Device->iPod->Music label in iTunes when it is plugged into my computer, the playlists in question are also showing up there, and it does indeed say my memory is full under the iPod's general tab in iTunes. However, when going through my actual iPod when it is not plugged in, none of those songs or playlists are anywhere to be found.
    Anyways, all the established solutions to the 13019 error do not apply to this situation, as my iPod has always been set to manually managed so "unchecking" the Sync Music option under the Music tab of the iPod and rechecking it will not work because it was never checked in the first place.  And voice memos are obviously not applicable since we are not talking about an iPhone failing to sync music.
    Unless anyone can provide a new solution here, I may just have to take my computer and iPod up to the genius bar. Any suggestions would be appreciated.

  • I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

  • Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Hello FranBNYC
    It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes &amp; related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

  • When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • My iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this,  I want to restore my phone to factory settings and reinstall my data but cannot back up first.

    my iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this,  I want to restore my phone to factory settings and reinstall my data but cannot back up first. Original problem is that I cannot connect to any wifi system anymore - have tried resetting network settings but did not work.

    Try 1 step at a time and do a backup, if no joy then do the next step:
    1. Switching off your anti-virus and firewall.
    2. Computer iTunes menu > Edit > Preferences... > Devices > delete your backup

  • When I try to sync my iPhone, I get an error message that says "This iPhone cannot be used because the Apple Mobile Device Service is not started.  There's no explanation of what to do to fix it.

    When I try to sync my iPhone, I get an error message that says "This iPhone cannot be used because the Apple Mobile Device Service is not started.  There's no explanation of what to do to fix it.

    Follow  this article:
    How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

    I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

    I used "Migration Assistant" to send everything from my old mac to my new which included my copy of Adobe Acrobat 8 Professional. I tried downloading an update but when it asked me to find the version of acrobat to replace it was grayed out and I was unable to select it. My OS is 10.9.4

Maybe you are looking for