Entry deleted from smq1 in R3

HI,
in case we have deleted entries from smq1 for 2LIS_02_ITM data source in R3 without running jobs that pass these entries to delta queue. i know its not advisbl todelete directly
so how we can recover data lost in BW due to this?
pls advice with steps in details

hello.
now we identified missing POs and filed set up tables with ranges wherever possible ..
Now my data flow in BW is as folows
data from R3 comes to DSO 1 ->DSO2->CUBE
in this DSO1 we did full repair without any selections so all data which was miisng mst have come including delivery date information for all POs as well..here actually we have addded DELIVERY date field to 2lis_02_itm data source.
now when we ran delta from DSO1 to DSO2 many records came ...till ods active table data is ok.
but on running delta from DSO2 to CUBE again many records came and here we see that data is coming from change log table of dso2 and here there are many rec for a single PO like- before iamge /after image/NEW IMAGE
i am confused what data doest it takes fwd to cube and in cube we see that 2 duplicate records coming...( 2 original data and 2 duplicate from change log..also when i did FULL REPAIR for the same PO this time no duplicate records and it was fine
can anyone advice please wht went wrong...

Similar Messages

Change Run - 'M' entries deleted from /BI0/M* table

Hello together,
I came across the following problem with master data activation...
After master data loading there appear new entries in all tables M,P, X, Q, Y with OBJVERS='M'. Next step is to execute Change Run, what should result in entries with OBJVERS='A' . Instead, in tables: M,P,X these entries are deleted and in time dependent tables - Q, Y these entries remain in Modified 'M' version. Do you have any idea why Change Run is working that way?
The problem concerns 0UCINSTALLA object in BW 3.5.
Thank you in advance,
Aleksandra

Hello again,
1) Activation - impossible, master data already active.
2) RSRV - 2 tests failed:
Time intervals in Q table for a characteristic with time-dep. master data:
- Characteristic 0UCINSTALLA: Checking consistency of time intervals in Q table
- Characteristic 0UCINSTALLA: Chain of active intervals: 8 737 gaps (show max. 50):
- Char. 0UCINSTALLA: Chain of changed intervals: 12 overlapping (show max.25):
Compare characteristic values in SID/P/and Q tables for characteristic 0UCINSTALLA
- Characteristic 0UCINSTALLA : Check for all values existing in P, Q and SID tables
- Characteristic 0UCINSTALLA: Errors found during this test
- Characteristic 0UCINSTALLA: 8 730 values from table /BI0/SUCINSTALLA do not exist in table /BI0/QUCINSTALLA
- Characteristic 0UCINSTALLA : Following versions are incorrect: (Display max. 50)
- Characteristic 0UCINSTALLA: 8 730 values from table /BI0/PUCINSTALLA do not exist in table /BI0/QUCINSTALLA
- Characteristic 0UCINSTALLA : Following versions are incorrect: (Display max. 50)

Duplicate entry is not deleted from the TCA tables

Hi
We are using Oracle Customer Online to find the duplicate data and Oracle Data Librarian to remove the duplicacy. The request to remove the duplicates is taken up by ODL and the task is performed. When checked from OCO it shows that the duplicate entry has been erased but when checked in the TCA table HZ_PARITES, the entry is still there. Can anyone please help regarding this as why this is so... after removing the duplicate entry why is it still there in the table or if the entry is still there then why cant you access it through OCO
Regards
Sourav Biswas

Hi,
Did you check the value for "STATUS" column in HZ_PARTIES table for the deleted records? It must be "D" which reperesents "Deleted". See the "REGISTRY_STATUS" AR lookup which validates the Party Statuses.
When duplicates are eliminated using Data Librarian/Party Merge, the records are not actually deleted from the database, instead the party status will be changed to "D". This must be the reason for not being able to see the records from Customers Online.
I guess, the same case might have occurred to your entries.
Wishes,
RK Goud

While deleting project from CJ20N entries are not deleted from table PRPS

Hi,
I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
Any deletion Flag should also be checked?
Thanks in advance!
Regards,
Jyoti

Hello,
Thanks for reply !
My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
Why they are appearing in PRPS table and how it can be deleted?
Thanks !

I want to search Time Machine for an appointment that has been deleted from my current view of iCal. Can I "restore" a previous version of iCal without losing all the entries I've made to the calendar since that prior date?

I want to search Time Machine for an appointment that has been deleted from my current view of iCal. Can I "restore" a previous version of iCal without losing all the entries I've made to the calendar since that prior date?

No. I tried it on my Time Machine (I had just made one change today, so I knew I would not be left in the lurch if I failed) and when I clicked on restore I got this message:
It seems you have several options. I chose 'Keep Both'. I suggest that you proceed with your search.
Ciao.

All Values Deleted from Target System when transporting new values added

Hi,
Wasn't really sure where to put this question.
I created a maintenance view between two Z tables. A main key table and a text table.
I added the new values to the maintenance view and transported successfully.
I then had a request to create 3 more values.
I added these three and transported these to the target QA system.
However when the transport completed, all entries bar one had been deleted from the Z table but the Z text table had all existing entries plus the three new ones.
I've tried manually creating a transport and adding all 10 entries but this has the same problems.
If I SCC1 the entry from one dev client to another it works fine.
Has anyone come across this problem befor and know how to resolve it?
Many Thanks
David

Yes, I managed to sort it.
This is what I did:
I created a new blank transport.
For the task created under the transport I then opened the task object list.
I then added two entries in this list. i.e. one for each table that was in the view.
My entries where:
Entry 1:
Program ID: R3TR
Object Type: TABU
Object Name: ZNR_REASON
Then click on the key icon and add:
Table Name: ZNR_REASON
Table Keys: 200* (NOTE 200 is our development client). The '*' is needed to that ALL entries are included in the transport.
Entry 2:
Program ID: R3TR
Object Type: TABU
Object Name: ZNR_REASONT
Then click on the key icon and add:
Table Name: ZNR_REASONT
Table Keys: 200* (As above 200 is our development client). Again the '*' is needed to that ALL entries are included in the transport.
I hope this helps.
Regards
David

How to delete account from thunderbird without deleting from server

I am lending a PC with Ubuntu and Thursderbird to a friend for a trial period. I want to delete two email accounts in Thunderbird without deleting same from the email server. The information in help seems to indicate that if I delete my accounts, those accounts will also be deleted from the server. This is not desireable - is there a way around this this? Thanks!

'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select the account}'''
At the bottom of the pane listing your accounts, look for '''Account Actions''', and when you click that, look for and click on '''Remove Account'''.
Doing this removes the account from Thunderbird. It actually retains the data files associated with the account but removes the account entry and its settings. What's on the server remains untouched - well, at least that is my understanding. Can you provide a link to the help that suggested otherwise?
In theory, unless you encrypt your home folder, a savvy user could find the mail store in your profile and read it. You might want to go a step further and remove the entire profile.

Invoice blocked for qty reason, but condition type deleted from the PO

Hi Gurus,
I have an LIV with R block in the header level. The invoice contains a line item for planned delivery cost condition type FRB1 which was entered manually during PO creation.(no condition record exists for FRB1). But the condition type FRB1 is missing from the PO line item now and when trying to release the invoice block via MRBR, it gives the message that the 'list is incomplete'.
The PO is not having any release strategy and the invoice number is available in the index table RBKP_BLOCKED.
The condition type FRB1 got deleted from the PO on re-triggering the pricing. The business needs the pricing to be carried out on the shipment date from the vendors site. So when the vendor issues the goods, the same is updated in the pricing date field in PO line item and the pricing is re-triggered. So in this case the happenings were in the below sequence.
1. Buyer created PO with manually entered FRB1 condition type.
2. Invoice posted against the PO.
3. When vendor has shipped the goods, the ASN updates the pricing date in the PO and carries out re-pricing. The FRB1 got deleted from the PO on re-pricing as no condition record existed.
4. Goods receipt posted
5. Trying to release the invoice in MRBR, but the system gives the message that the list is incomplete.
Please suggest how to go ahead with the resolution of the issue.
Regards,
Greg

Gregory Mathews wrote:
Hi Gurus,
>
> I have an LIV with R block in the header level. The invoice contains a line item for planned delivery cost condition type FRB1 which was entered manually during PO creation.(no condition record exists for FRB1). But the condition type FRB1 is missing from the PO line item now and when trying to release the invoice block via MRBR, it gives the message that the 'list is incomplete'.
> The PO is not having any release strategy and the invoice number is available in the index table RBKP_BLOCKED.
>
> The condition type FRB1 got deleted from the PO on re-triggering the pricing. The business needs the pricing to be carried out on the shipment date from the vendors site. So when the vendor issues the goods, the same is updated in the pricing date field in PO line item and the pricing is re-triggered. So in this case the happenings were in the below sequence.
>
> 1. Buyer created PO with manually entered FRB1 condition type.
> 2. Invoice posted against the PO.
> 3. When vendor has shipped the goods, the ASN updates the pricing date in the PO and carries out re-pricing. The FRB1 got deleted from the PO on re-pricing as no condition record existed.
> 4. Goods receipt posted
> 5. Trying to release the invoice in MRBR, but the system gives the message that the list is incomplete.
>
> Please suggest how to go ahead with the resolution of the issue.
>
> Regards,
> Greg
Hi Greg,
Are there any a/c entries showing in GR a/c doc for this cond type? I think it could be a bug when you run the ASN Idoc. Try to un-check Delete indicator for FRB1 which would stop it getting deleted.
Regards
Shiva

Inbound delivery item deleted is not deleted from BI DSO?

Hi All
An Inbound deliver created and pushed to BI..
Source PSA is FULL UPDATE and DTP is DELTA UPDATE
Ex: 800000 10   10000
                    20 10000
This is what pushed to ODS..Later next day,
they deleted the to 800000 10 10000
So PSA is refreshed with one item .
800000 10 10000
whereas DSO still shows as follows:
800000 10 10000
              20 10000
I have following options:
1. convert DTP to FULL update, so the data gets refreshed..
2. ELse delete the only one record..
But user sometimes need to delete the inbound delivery....based on item required..
we cannot go and delete everytime for this issue..
What are the best solutions that you experts can suggest.??

HI...
This is a known problem in ECC-BI.   Deliveries can only be deleted from ECC system but can not be cancelled. So the extractor is not able to provide a deleted image for the record.
Two solution can be there,
1. Full Load of all BI target every day ---this solution is practical only when your data volume is less and full load does not take much time. But if your data volume is huge and flow is complex one then this is not the solution.
2. Second solution is to identify which Delivery Doc - Item combination got deleted from ECC system and then you can just put a flag against those documents.
You can easily find which doc- item got deleted from CDPOS and CDHDR entry. In our project we created one DataSource based on InfoSet Query ( SQ02) on CDPOS ( item level) and CDHDR ( header level) and pulling all the documents which got deleted in ECC system. For all those Delivery-Item we put a deletion flag and restrict the query accordingly.
in CDPOS following fields are important.
a) CHNGIND: Change Type (U, I, S, D) u2013 This field shows whether the entry is deleted, updated or inserted. We are here interested in the value: D (Deleted).
b) OBJECTCLAS: Object class u2013 This field is used to get the data related to Deliveries, Sales etc. For deliveries, value is LIEFERUNG; For Sales, value is VERKBELEG
c)TABNAME: Table Name u2013 This field contains the table name from which the value is deleted. The tables for Deliveries are LIKP and LIPS. To get the item level data, keep the value as LIPS.
d) TABKEY is 18 characters long field, in which first 3 numbers is the client number, next 10 shows the document number and next 5 shows the item number. E.g.: 750001099999900010, where 750 is client, 0010999999 is document number and 00010 is item number
Also have a look at How to Guide below
Link [CDPOS-CDHDR|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50dd3fb9-0dad-2d10-0ea7-cbb0bb8b391b?QuickLink=index&overridelayout=true]
how to view deleted delivery
Regards
Anindya

DELETE FROM Subquery Question

When having to delete form a subquery (based on two unique identifiers) I concantenate the two columns to make them unique to an entry. Are there issues w/ this method and can any suggest something different (if any).
delete from ACCT_TEMP a where upper(a.id_name) || a.system_id in (
select upper(a.id_name) || a.system_id from ACCT_TEMP a, ACCT b
where upper(trim(both ' ' from a.id_name)) = upper(trim(both ' ' from b.account_name)) and a.system_id = b.system_id)

Topher34 wrote:
I had this problem before. Because, say I have an ID ABC123 on System 12345. And, the ABC123 also existed on system 98765. That is the reason I concant.
But, when I did the delete from table where (col1, col2) in (select blahblahblahblah) it would delete the entire table. I played w/ it forever and forever!You need to be careful when using uncorrelated subqueries like the ones used with the IN operator. If you're accidentally referring to columns from the outer query, they will get used without warning which can lead to such side effects, since you effectively say e.g. "from table_1 where (col1, col2) in (select col1, col2 from table_2)", but in table_2 there is no "col1" or "col2", see the following small example:
SQL> create table test_1 as
2 select 1 as col1, 2 as col2
3 from dual;
Table created.
SQL> create table test_2 as
2 select 3 as col3, 4 as col4
3 from dual;
Table created.
SQL> desc test_1
Name                                      Null?    Type
COL1                                               NUMBER
COL2                                               NUMBER
SQL> desc test_2
Name                                      Null?    Type
COL3                                               NUMBER
COL4                                               NUMBER
SQL> delete from test_1
2 where (col1, col2) in (
3    select col1, col2
4    from test_2
5 );
1 row deleted.
SQL> rollback;Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Deletion from internal table

Hi,
My requirement is that I have to delete the duplicate values before doing any manupilation of data.. so for this I have written the code...
*Deleting all the duplicate entries comparing group code, GL *& GL Suffix
IT_INPUT_TEMP[] = IT_INPUT[].
SORT IT_INPUT_TEMP BY GRCODE GL GLSUF.
DELETE ADJACENT DUPLICATES
         FROM IT_INPUT_TEMP COMPARING GRCODE GL GLSUF.
Now with the remaining values in the internal table I have to check the 3rd field i.e. GLSUF & if it = '00000' (5 zeros)... i have to delete those entries...
For this I have written...
Deleting enteries where the GL Suffix is zero.
IF IT_INPUT_TEMP-GLSUF = 00000.
    DELETE IT_INPUT_TEMP.
ENDIF.
It gives me a dump saying "Invalid_Table_Index"...
Prior to this I have also checked up by using Index function.
Deleting enteries where the GL Suffix is zero.
IF IT_INPUT_TEMP-GLSUF = 00000.
    DELETE IT_INPUT_TEMP index l_tabix.
ENDIF.
Can anyone tell me where I am wrong??..
Thank You & Regards,
-S.

Hi S,
Your code extract
* Deleting enteries where the GL Suffix is zero.
IF IT_INPUT_TEMP-GLSUF = 00000.
DELETE IT_INPUT_TEMP.
ENDIF.
Either this should be in a loop(which is unnecessary if all you are trying to achieve is deleting records), or you can try the option with 'WHERE' clause as mentioned in the above post.
DELETE FROM IT_INPUT_TEMP WHERE GLSUF = '00000'.
Regards,
Srinivas

Photos are not deleted from "recently deleted" folder after 30 days

Hello-
I tried to sync my iPhone 6 today, and iTunes read that there were 2500 pictures stored on my device (nearly double what I actually have). I did some searching online and I found that if I change the date of my phone back 1 month (to Feb. 15), all of the photos that were supposed to have been deleted from the "recently deleted" photos folder had reappeared. I manually went back through and deleted the photos that had reappeared in my recently deleted folder from every month since I got my phone (Oct. '14), and then iTunes said I was back down to 1400 pictures.
Why hadn't the pictures deleted after 30 days like they were supposed to? How can I rectify this?
Thanks,
Carson

Thanks for your quick answers!
I realized that I didn't select the option 'enable adaptive junk mail controls for this account', but, even selecting it, the junk mails are not automatically cleaned. I tried restarting Thunderbird, restarting the computer, and even manually changing the date and restarting Thunderbird, but nothing worked.
I checked the entries in the advanced configuration, and they are all correct.
My aim, as it was with the other problem I posted, is just to help to improve the development of Thunderbird by pointing the bugs. But they are actually really minor issues and not a real problem for me. So don't worry if the problem is not finally solved.
And thanks again!

Table entries deleted in Customized table.

Respected Guru's
table entries in a customized table were deleted in production system, no transports pertaining it was found.
Table entries were updated using bapi.
Please help me to know how the table entries were deleted.
Daya.
Edited by: Dayananadan Anandan on Nov 12, 2009 11:35 AM

Hi Johnson,
you might have to restore the DB Backup for the table to gt back the data....
Furthermore, if you want to track how the entried were deleted then there are 2 ways to go about it:
If the Deletion of the records was through an application (FM,Program call) then there should be Chande Documents available for them and you can search them by hitting tables CDHDR and CDPOS...
If the Deletion of the records was done physically the you can try looking into the tables UASE16N_CD_KEY and UASE16N_CD_DATA (deletion from transaction UASE16N) or tables SE16N_CD_KEY and SE16N_CD_DATA(Deletion from SE16). This will give change pointer documents if the records were deleted using these transactions...
Another option might be that somebody has used the Database utility and selected the option Delete Data. In this case you can have a look at the object log....
Hope this helps....
Regards,
Sitakant.

Credit Card Error file accidently deleted from system.

Hi Experts,
I have a situation were all the error credit card will be stored in PRCCE transaction code. Once we have rectified the error in PRCCE, we need to run PRCCF to generate the file.
Once this file is generated from PRCCF, error entries in PRCCE will be removed. Now Accidently this file, which was generated from the PRCCF has been deleted from the system. We could not trace this file in the system at all.
How can we over come all the correct trip ? Is there any other way to generate the file again?
Please advice.
Regards,
Raziq Fareed.

Apple is not being sneaky. You are just uninformed about how things work in the iTunes and Mac App Stores. Nowhere did you read anything to lead you to believe that your bank card information would be discarded after the first use. That is something that you made up in your head.
The tax situation in the USA is different than most other countries. Here in Mexico, as well as many other countries, there is a federally mandated tax of a given percent of the purchase. That tax is nationwide, so wherever I may live in Mexico the tax is the same. That is not true in the USA. Every state and even every city can levy its own tax on the sale, so the price of an item plus the tax will be a slightly different total everywhere you buy the item. For that reason the prices in the MAS do not have the tax included. The tax is added at check out when it is established where you are located and the tax for your location is applied.
The reason that Apple expects that you will repurchase the app with the gift card is because Apple is expecting you to be honest. You were ignorant of how to correctly redeem a gift card and the system charged your bank card on file. Apple has credited the charge to your bank card because you have complained about your own ignorance of how the system actually works. Apple expects that as an honest person you will delete the app for which you have been reimbursed. Apple expects that if you still wish to have the app that you will properly redeem the gift card and purchase the app.
So at this point, the real question is - Are you an honest person?

Deadlock when deleting from rsstatmanpsa during DSO activation

We are experiencing intermittent Oracle deadlocks during DSO activation in our BI system. The deadlocks occur when the following SQL statement is executed:
      delete from rsstatmanpsa where
             partnr >= l_s_status-rnr_sid and
             psa     = l_s_status-dta.
This is at line 83 of the SET STATUS method of class CL_RSSM_STATMAN. (See below for runtime error details.)
When these errors occur the background job for the DSO activation is cancelled with the message ABAP/4 processor: DBIF_RSQL_SQL_ERROR. Strangely, when this occurs as part of a process chain, the status of the process variant does not get updated until/unless someone displays the process chain log, at which point the status changes and follow-on events are triggered. In other words, the process chain does not seem to be receiving word that the DSO activation process has abended, so we do not receive alerts that a problem has occurred.
Has anyone else experienced this issue?
Thanks,
Bob
P.S. We are running BI 7.0, Patch Level 15 on Oracle 10.2.0.4.0
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SET_STATUS" "(METHOD)", nor was it propagated by a RAISING clause.
How to correct the error
Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/DELE/RSSTATMANPSA ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_RSSM_STATMAN===============CP" or "CL_RSSM_STATMAN===============CM008"
"SET_STATUS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SET_STATUS" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Information on where terminated
Termination occurred in the ABAP program "CL_RSSM_STATMAN===============CP" -
in "SET_STATUS".
The main program was "RSPROCESS ".
In the source code you have the termination point in line 83
of the (Include) program "CL_RSSM_STATMAN===============CM008".
The program "CL_RSSM_STATMAN===============CP" was started as a background job.
Job Name....... "BI_PROCESS_ODSACTIVAT"
Job Initiator.. "ALEREMOTE"
Job Number..... 05302800
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "SET_STATUS" "(METHOD)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "CL_RSSM_STATMAN===============CP "; its source
code begins in line
1 of the (Include program "CL_RSSM_STATMAN===============CM008 ".
Source Code Extract
Line
SourceCde
53
if i_with_internal_check is initial.
54
l_s_status = i_s_status.
55
call function 'RSSM_GET_TIME'
56
importing
57
e_timestamps = l_s_status-ts_last_changed.
58
if l_s_status-ts_proc_started <= '10000101000000'.
59
l_s_status-ts_proc_started = l_s_status-ts_last_changed.
60
endif.
61
if l_s_status_exist is initial.
62
insert rsstatmanstatus from l_s_status.
63
if sy-subrc <> 0.
64
message x000.
65
endif.
66
else.
67
modify rsstatmanstatus from l_s_status.
68
if sy-subrc <> 0.
69
message x000.
70
endif.
71
endif.
72
delete from rsstatmanpart where
73
rnr      = l_s_status-rnr and
74
dta      = l_s_status-dta and
75
dta_type = l_s_status-dta_type.
76
select single * from rsstatmanpsa into l_s_psa where
77
rnr      = l_s_status-rnr and
78
psa      = l_s_status-dta.
79
if sy-subrc = 0.
80
delete from rsmdatastate_psa where
81
psa = l_s_status-dta and
82
type = l_s_status-dta_type.
>>>>>
delete from rsstatmanpsa where
84
partnr >= l_s_status-rnr_sid and
85
psa     = l_s_status-dta.
86
else.
87
select single * from rsmdatastate_psa into l_ds_psa where
88
psa = l_s_status-dta and
89
type = l_s_status-dta_type.
90
if sy-subrc = 0 and l_ds_psa-sid_checked > l_s_status-rnr_sid.
91
delete from rsmdatastate_psa where
92
psa = l_s_status-dta and
93
type = l_s_status-dta_type.
94
delete from rsstatmanpsa where
95
partnr >= l_s_status-rnr_sid and
96
psa     = l_s_status-dta.
97
endif.
98
endif.
99
if i_with_commit = 'X'.
100
call function 'DB_COMMIT'.
101
endif.
102
endif.

Walter,
Thanks for the suggestion. This is the same recommendation I just received from SAP.
We are currently in the midst of regression testing for a major release, so cannot implement these corrections immediately. I'll post again after we implement the corrections and let you know if they solve our problem.
Thanks again.
Bob

Entry deleted from smq1 in R3

Similar Messages

Maybe you are looking for