ENUM 'digital display' showing up instead of 'item' when specifying module

When there is an ENUM with a string in 'item' that string gets selected
and displayed when specifying a module. This makes sense. But if the
ENUM 'items' are numeric, you can select one of the ENUM items from the
pull-down list (when specifying the module), but when you press the
'ok' button and then try to specify the module again it reverts to the
'digital display' integer reference index. If you do not have a 1:1
correspondence between 'item' and 'digital display' (e.g. 0 to 0, 1 to
1, 2 to 2, etc.) it appears to be very odd behavior, like it isn't
taking the value you selected. Actually it is, but if you don't know
what the 'digital display' numbers refer to you can't tell if it is
right.
Is there a way to get it to stop doing this? Just display the item that was selected, not the 'digital display' reference?
John

Either I'm not understanding the problem, or I'm not seeing what you're seeing.
If I drop an enum and use numbers for the "Item Strings", the numbers I
entered for the items are all that I see in the enum selection list.
It sounds like what you are saying is you are seeing the enum index being displayed in the selection list. Is this correct?
Also, what version of LabVIEW are you using.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

Log display showing XML instead of table

Had a customer re-install xMII 11.5 SR3 and copy transactions, config XML files, ref docs, etc. We don't know exactly the extent of what was/was not copied.
Now the logs (general, user, etc.) are being displayed as xMII XML instead of being transformed into the standard HTML table. BLE is working, applets work, portal navigation works, IIS is running, and the .../wwwroot/Illuminator/StyleSheets directory appears ok.
Any ideas or things to check?
Thanks,
-tim

Tim,
Check to make sure that for both the IIS root directory and Lighthammer directories so that the SYSTEM and IUSR_<MachineName> users have Full Control and Inheritable permissions are set. Sometimes these are lost by Windows and the application can't access various resources properly.
Hope this helps.
Sam

Display Field Filled With 'New Item' when Blank

Hi all,
I am facing a Strange Problem.
When i try to create a Record Via DM, When a DF is Blank and once the record is saved it is being filled with a text called 'New Item'..This is Occuering siometimes when i create and sometimes not.
There is a validation which will not allow to leave it blank, but the validation is not executing properly as the Field is filled with text 'New Item' Some times (Which inturn says it is not NULL)
How to get rid of this issue.
I need this Feild to be DF Because i need to include this field in Email notification.
In production the records will be created via Portal.
I am worried if this will be replicated via Portal!!
Can anyone suggest me..
KR
John

Hi John,
Yes you are correct. When your field is a display field & if you dont enter data in it while creating record, MDM will add default value "New Item" in it. (even if you create record from Portal same thing will happen)
If you want to write Not Null validation on this field below is the work around:
Enable the Required property for your field in console.
But Required property in console works only when u write validation in Data manager.
The default REQUIRED_FIELDS validation does not work if your required field is also a Display field
You need to write addition condition along with REQUIRED_FIELDS.
When you try to create record without entering data in display field, MDM will add default value "New Item" if field lengh is equal to or more than 8 ( or "New It" if legth is 6 for example)
So copy the value which you will get in ur display field and use it as shown below:-
REQUIRED_FIELDS AND Name < >"New Item" (Here Name is considered as display field) (REQUIRED_FIELDS you need to type in expression window)
Or if you dont want to enable required property Then just add Name <> "New Item" validation in your existing expression (Here Name is considered as display field)
Thanks,
Mahi

Macbook display shows black and white lines when fullscreen

If i leave my Macbook on for a while without shutting down and then I view a photo or movie (in player or safari) fullscreen the screen shows just black and white lines. Sort of like bad tv reception. It has happened a few times and a reboot has fixed it but it comes back. Any ideas anyone?
Thanks

I have a similar problem. Not sure you're on here (since the post is really old) but did you manage to work it out? How?
My thread:
https://discussions.apple.com/message/19007548#19007548
My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
Now when I try to start it these weird lines appear on my start up screen (see link)...
http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
as you can see the apple and the wheel appears as normal...
... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
I've tried the cmd + alt + p + r several times but it won't help.
If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
Can I try starting it up in safe mode or something?

Visual Studio Tabs - Show Title instead of Work Item Number?

When opening individual work items in Visual Studio, the tab in the document well just says "Task 100485" or "Bug 38374". Is there a way to instead have it show the Title of the work item? Just showing the number isn't really
helpful when quite a few are kept open.

Hi Brian,
Thanks for your post.
We show view the work item Title in each opened work item form in VS. As the work item’s tab has fixed width in VS, so if show the work item Title in each work item’s tab in VS, it will costs the wide width, if work item’s title is long, maybe two or three
work item tabs can show in VS at the same time.
As far as I know there’s no default way to change work item’s tab show work item Title in VS. For this scenario, please
submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

Help! my System Preference Display shows Color LCD instead of MacBook Pro! Y is is saying this?

Hello people, my MBP's systempref>Display shows "Color LCD" when ity should have been MacBook Pro! YTF is it like that?

It's supposed to read "Color LCD" - there's no "MacBook Pro" color profile (unless you've created one and saved it with that name).
Clinton

How do I change the number of significant digits in a slide's digital display?

I suspect I'm missing something really obvious. I want the slide's digital display to show 1.23 instead of 1.23456. Here's what I tried:
1. Drop a Horizontal Pointer Slide
2. Make its Digital Display visible
3. Type 1.23456 into that display
4. Pop up on the Digital Display and select "Display Format..."
5. Change the number of significant digits to 3 and hit "OK"
The digital display still shows 1.23456. What am I missing?
Solved!
Go to Solution.

LOL - I had the same problem. Hidden in plain sight! All I saw was Numeric, and thought "Duh! Of course it's numeric - it's a slider!"
I do think NI could do a much better job on this, perhaps with more informative labelling. Slider Scaling or Scale Format might be better. Also, since one can select the Digital Display by itself on the front panel, one should be taken directly to the digital display formatting when Properties is selected, instead of still having to change the dropdown. By selecting the digital display instaead of the slider, you're implying that you want to change its format only.

How to configure CSWP on Category page to show the Published Catalog-item page on Publishing site in a Cross Site Publishing scenario?

I have created a Cross Site Publishing Environment in SharePoint Online. After connected
to my catalog. 2 pages automatically created. But in "Category" page, if i click on an item it will bring me to the original path/item located in Authoring site. How to configure Content Search Web Part on Category page to show the Published Catalog-item
page on Publishing site?
Can we do this by changing the property mappings?

Hi,
According to my understanding, you want users to be redirected to pages in the current site instead of the source page of the search results in a Content Search Web
Part.
By default, the hyperlinks of the search results in a Content Search Web Part will point to the source page where the data comes from, when the hyperlink of each result
is clicked, user will be redirected to the corresponding source page.
If the data comes from other sites, what page do you want to display when user clicks a search result in the Content Search Web Part?
Property Mappings can help to control the content of each part of a display template, however, there seems no such property in the search result can help to redirect
to the pages of the current site, thus, it might not be able to meet your requirement.
More information about customizing the Content Search Web Part:
https://www.martinhatch.com/2013/02/customising-cbswp-part1.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

5D Mark II viewfinder digital display issues

Hello everyone,
I have a 5D M2 and have started noticing my viewfinder digital display displaying funky when certain amount of light comes in or adjusting the ISO. For example, the numbers for shutter, apature, and ISO are hard to read. My exposure meter shows three bars instead of one. Again this is when over exposing the images slightly. If I under expose it by bit, viewfinder display works good.
I have attached a couple of images.
Has anyone experience this? I'm trying to find out how much i'll be looking at to repair it before i send it to Canon.

We really need to ask a current 5D Mk II owner as I sold mine a long while ago. Maybe it didn't have that feature? Another thing to check, make sure you have the correct focusing screen selected in the menu. The wrong one can darken the viewfinder.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Digital Display format bug?

I have an enum (happens to be a typedef) with the Display Format set to %.1d_0x%x so I can see decimal and hex representation. When I turn on the digital display on the control it works fine. If I turn the control into a constant the display format only shows the decimal part.
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect

This was reported to R&D (# 318263) for further investigation.
Although it was submitted 10/10/2011, I am following NI discussion forum protocol by posting here properly. I have no updates to share at this point. However, I will take this time to again personally thank you for taking the time to point out the bug.
Ben D.
Applications Engineer
National Instruments

Button displayed among this region's items clears fields

I've created a Button displayed among this region's items clears fields that's in the middle of my form, set to Submit Before...
When click the button, it submits and the field items above the button clear off the form.
I don't need it to submit, I just need it to make three fields appear on the form if needed, hence the use of the button.
Thanks in advance!

Hi,
userRRRYB wrote:
The user is cataloging documents. On the form she enters document number, title, owner, and document type (Work Instruction, Verification Sheet, Pallet Layout, etc.) If the document type is a Product Label, there are three more fields that need to be populated. Because the Product Label is one of over ten types and it's the only type that requires these extra fields, I got the bright idea to create a button that, when clicked, displays the fields.
The problem is that the button is 'among the region's items' and submits when clicked (Request = Go) so it submits and clears the fields that have been populated prior to the fields in question.Assuming you are on Apex 4.0+ Instead of using buttons to display 3 extra fields when document type is product label use dynamic action to hide and show items, Here is how you create it
1) Create standard dynamic action
2) Selection type (item) -> item(s) -> :PXX_DOCUMENT_TYPE -> Value (20) Assuming you have created select list for document type field
3) Specify true action -> show -> item(s) (select the three items you want to display) -> create false action (checked)
By using DA your field values will not clear out.If you are on 3.0 you can do this with javaScript.
It would be easier to help you out if you provide APEX version or recreate your problem on apex.oracle.com
Regards,
-Senthil

Goods receipt subtotal is showing zero instead sum of quantity..!

Hi Guys,
1. Goods movement subtotal showing 0 instead of the total of the quantity.
The check throwing the following error message.
Update control of movement type is incorrect (entry 122 X X)
Message no. M7226
2. Purchase order data tab not showing item details for variance items but showing the message
"This item has not been ordered." But the PO items are ordered and present in the PO.
Please find the screen shots.
Thanks
Sam

Hi Sam,
Kindly Check table T156SC entries there is a entry missing in the table.
And if required so kindly Maintain the missing entries in table.
If entries of movement type 101 are prefect then
Goto Transaction -- SE37 ,
Function module -- MB_CONTROL_MOVETYPE_GET_SINGLE
Kindly do Set a break point to select statement which is failing at the table above at both the systems.You should be able to crack the error.
Hope this will help you to solve the issue.
And if not Kindly let us know.
Thanks & Regards
Ritesh Kumar

How can I display an icon, instead of text string, as a validation prompt?

My validate method inside my custom validator is like this:
public void validate(FacesContext context, UIComponent component, Object value) {
Pattern datePattern = Pattern.compile("(\\d{2})/(\\d{2})/(\\d{4})");
Matcher dateMatcher = datePattern.matcher((String)value);
if(!dateMatcher.find()){
    ((UIInput)component).setValid(false);
    FacesMessage message = new FacesMessage();
    String msg = "[" + value + "] invalid date";
    message.setDetail(msg);
    context.addMessage(component.getClientId(context), message);
    FacesMessage facesMsg = new FacesMessage(FacesMessage.SEVERITY_FATAL, "xx", "msg");
    throw new ValidatorException(facesMsg);
}My JSP has this:
<h:inputText id="test" value="#{projecthandler.test}">
<f:validator validatorId="DateValidator" />
</h:inputText>
<h:message id="testErrorMessage" for="test"/>The <h:message> tag will kick in if the user has invalid data in the <h:inputText> field and clicks submit.
When the page is regenerated, the user will see a text string reflecting what the issue is.
However, instead of this, I would like to display an icon consisting of a red circle with an exclamation point.
The user is supposed to click on the icon if they want more information. By clicking on the icon,
the user will see a message box, with a description of the error.
This is our standard for applications. I'm trying to put together a demo showing how an existing application
would work in JSF, so I won't be able to talk others into using JSF, unless I can get the validation to display an
icon instead of text.
Edited by: Kazan on Mar 18, 2009 9:31 AM
Edited by: Kazan on Mar 18, 2009 9:33 AM
Edited by: Kazan on Mar 18, 2009 9:36 AM

OK, I noticed a bug in my validate method. This is updated to fix the bug, and to include the recomendation about background-image:
public void validate(FacesContext context, UIComponent component, Object value) {
    System.out.println("DateValidator.test.1");
    Pattern datePattern = Pattern.compile("(\\d{2})/(\\d{2})/(\\d{4})");
    Matcher dateMatcher = datePattern.matcher((String)value);
    System.out.println("DateValidator.test.1");
    if(!dateMatcher.find()){
      ((UIInput)component).setValid(false);
      FacesMessage message = new FacesMessage();
      String msg = "<span style='background-image: url(/error.gif)'/>";
      message.setDetail(msg);
      message.setSeverity(FacesMessage.SEVERITY_FATAL);
      context.addMessage(component.getClientId(context), message);
      throw new ValidatorException(message);
}When I run this, the litteral string of "<span style='background-image: url(/error.gif)'/>" is printed as the message. It does not interpret this as a span tag with an image url.
Can someone tell me what's going on?

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

ENUM 'digital display' showing up instead of 'item' when specifying module

Similar Messages

Maybe you are looking for