How to config the levels of backup for partioned cache?

hi all,
As coherence's document says, "Partitioned caches can be configured with as many levels of backup as desired, or zero if desired. Most installations use one backup copy (two copies total). ", could you pls. tell how? Great thanks!
thanks,
michael

Hi Michael,
there are several reasons on why it is usually recommended to have at least 3 nodes:
1. When a single node fails, Coherence after a short time (after the rebalance of the cluster completes) gets itself into a state which again is capable of surviving a single error (data is still backed up at least once). If there is only two nodes, and only one of them remains, this is obviously not possible.
2. Some of Coherence's protocols for determining what should happen after a cluster node becomes inaccessible behave differently when there are at least 3 nodes (majority wins), whereas when 2 nodes can't communicate with each other, none of them can determine which is faulty.
As for backup count:
Total memory consumption without overhead in the cluster is roughly (1+backupcount)*dataset-size + 1 * index-size.
I believe backup count larger than the number of nodes does not have any additional effect, each node will store only a single copy of the data.
BR,
Robert

Similar Messages

How to config the user and role in the runtime for executing in the GP?....

Hi Experts,
I am learning GP(Guided processor)according the document
http://help.sap.com/saphelp_nw70/helpdata/en/44/0d5b8f250d5cfae10000000a155369/frameset.htmneed.
I meet two question when I learn the GP.
The first:
This document don't tell me how to config the member framework of the company. After I design the GP, I have to config the user and role in the runtime for executing. I hope I can use the WDA(webdynpro for java or webdynpro for java) to implement to config the user for executing in the runtime. Thus, the customer don't config the user when runing the GP. But I don't know how to do this.
I need a document guide step by step to tell me how to do this.
The second:
If I use the workflow in the GP, I have to install and config the NWDI(Netweaver Development Infrastructure). Now I have installed the NWDI, but I don't know config it so that I can download it to my machine for develop the workfolw in the GP.
Do you give me some hints? Thanks a lot.
Thank a lot.
Best regards,
tao

Hi, Mithu,
Thanks a lot for your help in advance.
I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP. I don't know how to do this.
Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
Do you give me some hints? Thanks a lot. My email: [email protected]
Thanks again.
Thanks & Regards,
Tao

How to config the CLASSPATH in Win2000 server for JDBC(oracle.jdbc.driver,*)

I am using the OS: Win2000 Server.I need to connect to some remote DataBase,but I
don't know how to config the driver in the CLASSPATH environment variable, my Problem is: when I import the oracle.jdbc.driver.OracleDriver ,and run the program, it warns to me that it cannot find the class,and i know i didnot config the CLASSPATH in environment variables, so I want someone to tell me how to config it ,and where should the file "class12.zip" be placed !
Thank you! maybe the problem is a piece of cake for you ,but now i do not know how to deal with it!

Hi ,
try this,
http://myjdbc.tripod.com/basic/jdbcurl.html
Regards
Elango.

Sharepoint 2010 permission The following factors also affect the level of access for

hello,
In my development server ,suddently from no where all users ,even full control group users
cannot able to add or edit any list or any content.
The following factors also affect the level of access for user1(domain\user1)
Deny
Manage Permissions
Create and change permission levels on the Web site and assign permissions to users and groups.
Deny
Create Subsites
Create subsites such as team sites, Meeting Workspace sites, and Document Workspace sites.
Deny
Manage Web Site
Grants the ability to perform all administration tasks for the Web site as well as manage content.
Deny
Add and Customize Pages
Add, change, or delete HTML pages or Web Part Pages, and edit the Web site using a Microsoft SharePoint Foundation-compatible editor.
Deny
Manage Lists
Create and delete lists, add or remove columns in a list, and add or remove public views of a list.
Deny
Apply Themes and Borders
Apply a theme or borders to the entire Web site.
Deny
Apply Style Sheets
Apply a style sheet (.CSS file) to the Web site.
Deny
Override Check Out
Discard or check in a document which is checked out to another user.
Deny
Manage Personal Views
Create, change, and delete personal views of lists.
Deny
Add/Remove Personal Web Parts
Add or remove personal Web Parts on a Web Part Page.
Deny
Update Personal Web Parts
Update Web Parts to display personalized information.
Deny
Add Items
Add items to lists and add documents to document libraries.
Deny
Edit Items
Edit items in lists, edit documents in document libraries, and customize Web Part Pages in document libraries.
Deny
Delete Items
Delete items from a list and documents from a document library.
Deny
Create Groups
Create a group of users that can be used anywhere within the site collection.
Deny
Use Self-Service Site Creation
Create a Web site using Self-Service Site Creation.
Deny
Approve Items
Approve a minor version of a list item or document.
Deny
Delete Versions
Delete past versions of a list item or document.
Deny
Create Alerts
Create alerts.
Deny
Manage Alerts
Manage alerts for all users of the Web site.
Deny
Edit Personal User Information
Allows a user to change his or her own user information, such as adding a picture.
For all the users this happened ,How i need to fix this issue
please help.
thanks

Take a look at the user policy settings for the web application. I suspect someone has added a User Policy that covers the user which denies all these permissions. The User Policy at the web app level is the only place where you can deny permissions.
But that setting applies to every site collection in the web application and takes precedence over every other setting.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

How to reduce the level of free text / direct purchasing

A common problem at all sites is how to reduce the level of free text / direct / non catalogue based purchasing. This is where users enter an account assignment and free text instead of using an existing material number.
This is often the case because it is too "dificult" for the user to search and find the correct material number.
How have other sites handled this?
has anyone found a solution that if a user enters lets say "paper" into the free text box, a pop up appears with a match on possible materials with the word "paper" in the short description? This sounds like a pretty easy function to implement? Does anyone have the code?
Cheerio

>
Ravi.or.raj wrote:
> The search function you ask for is pretty much a standard functionality.
> In ME21N , click on "Personal Settings" , and select the check box "int search help on" .
Yes this works, but you have to tell that the user has to enter the text in the material number field, then SAP will search thru the database.

How to determine the level Of FRBs

Hi All
Can anybody tell me how to determine the level of profit center ( FRBs)
in SAP. I mean for example that how will i find out the level the level of
FRBs in the table BSIS.

Below query will help
select Serverproperty('productlevel'),
Serverproperty('productversion'),
Serverproperty('edition')
The last column will show you edition which will confirm whether it is enterprise ,standard,evaluation or express
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to config the Default Values in IT 2006

Dear Gurus,
                  My Client requirement is if i create Absence quota they want default quotas values
eg PL= 40
     CL=7
     SL=5
Then how to config the Default Values in IT 2006
Other wise where i have to assign in Quotas limit
Please advised
Regards
MHPO

Configure ur Absence Quotas with Selection group and assign the value of that selection group in Quomo
and run RPTQTA00
Time Data Personnel Time Management IMG   Managing Time Accounts Using Attendance/AbsenceRecording and Administration   Define Absence Quota Types. Time Quota Types Quotas
PersonnelIMG   Managing Time Time Data Recording and Administration Time Management  Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas   Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation  Personnel Time Management IMG   Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
PersIMG  Time Data Recording and Administration onnel Time Management   Calculating AbsenceManaging Time Accounts Using Attendance/Absence Quotas  Set Base Entitlements  Rules for Generating Absence Quotas Entitlements Base Entitlement for Absence Quota Generation.
Personnel TimeIMG   Managing Time Accounts Time Data Recording and Administration Management   Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas   Determine Validity and Deduction Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration  Personnel Time Management  Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas   Define Set Base Entitlements  Rules for Generating Absence Quotas  Generation Rules for Quota Selection.
Define Public Holiday Work Schedules  Personnel Time Management IMG Classes
Personnel Work Schedules  Personnel Time Management IMG   Group Personnel Subareas for the Work ScheduleSubarea Groupings
IMG   Group Personnel Subarea Groupings  Work Schedules Personnel Time Management Personnel Subareas for theDaily Work Schedule
 Daily Work Schedules  Work Schedules  Personnel Time Management IMG Define Daily Work Schedules
Work Personnel Time Management IMG   Define Period Work Schedules. Period Work Schedules Schedules
IMG   Define Day Day Types  Work Schedules Personnel Time Management Types.
 Day Types  Work Schedules  Personnel Time Management IMG Define Day Types.
Day Work Schedules  Personnel Time Management IMG   Define Special Days.Types
Work Personnel Time Management IMG   Define Employee Subgroup Work Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules  Personnel Time Management IMG   Define Groupings for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules  Personnel Time Management IMG   Set Work Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules  Personnel Time Management IMG   Generate Work Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time  Work Schedules  Personnel Time Management  Default Value for the Work Schedule.
 Personnel Time Management IMG   Set Default Value for Time Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG   Define Personnel Subareas for Substitution Substitutions Administration Types.
Time Data Recording and Personnel Time Management IMG   Set Defaults for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration  Personnel Time Management  Group Personnel Subareas for Attendances and Absence Catalog  Absences.
Time Data Recording and Personnel Time Management IMG   Define Absence Types. Absence Catalog  Absences Administration
IMG  Absences  Time Data Recording and Administration Personnel Time Management   Define Counting Classes for the Period Work Absence Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG   Rules for Absence Counting  Absence Catalog  Absences Administration   Group Employee Subgroups for Time Quotas.Absence Counting (New)
IMG  Absences  Time Data Recording and Administration Personnel Time Management   Group Rules for Absence Counting (New)  Absence Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG   Absence Absence Catalog  Absences Data Recording and Administration   Define Rules for Rounding Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG   Rules for Absence Counting  Absence Catalog  Absences Administration   Define Counting RulesAbsence Counting (New)
Personnel TimeIMG   Absence Catalog Absences  Time Data Recording and Administration Management  Define Counting Rules  Rules for Absence Counting (New)  Absence Counting  Deduction rules for Absence quotas
Time Personnel Time Management IMG   Absence Absence Catalog  Absences Data Recording and Administration   Assign Counting Rules to Absence Types.Counting
Personnel TimeIMG   Attendances/Actual Working Time Data Recording and Administration Management   Define Attendance Types.Times
Time Personnel Time Management IMG  Attendances/Actual Working Times Data Recording and Administration   Assign Counting Rules for Attendance counting (New) Attendance counting Rules to Attendance Types.
Time Data Personnel Time Management IMG   Managing Time Accounts Using Attendance/AbsenceRecording and Administration   Define Absence Quota Types. Time Quota Types Quotas
PersonnelIMG   Managing Time Time Data Recording and Administration Time Management  Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas   Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation  Personnel Time Management IMG   Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
 Time Data Recording and Administration  Personnel Time Management IMG Managing Calculating AbsenceTime Accounts Using Attendance/Absence Quotas  Set Base Entitlements  Rules for Generating Absence Quotas Entitlements Base Entitlement for Absence Quota Generation.
Personnel TimeIMG   Managing Time Accounts Time Data Recording and Administration Management   Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas   Determine Validity and Deduction Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration  Personnel Time Management  Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas   Define Set Base Entitlements  Rules for Generating Absence Quotas  Generation Rules for Quota Selection.

How to config the ws-security?

how may i config the ws-security options for a http-soap
adapter?
the webservice needs w-security authentication, as a result i got this error message as reply to my request
( soap fault: WSS4JInHandler: security processing failed )
to config ws-security i tried to enabled the checkbox
"choose securityprofile"
in the options of the soap adapter.
as second step i had to config the
receiveragreement options.
in the key-options i can choose "service_ssl" and "ticketkeystore"
i think i need a extra key for this service.
how can i create this keys?
where can i find good documentation for the soap-adapter and the security options
thx Ronald

Documentation SOAP adapter - http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/content.htm
Security settings for SOAP adapter - http://help.sap.com/saphelp_nw04/helpdata/en/56/992d4142badb2be10000000a1550b0/content.htm

How to config the oracle database connection pool in IAS

Hi,
Does anyone who hows to config the oracle database connection pool in IAS?
Thanks so much!!!
[email protected]
Jacky

Jacky,
You need do the following for oracle type4 driver:
1) register the driver:
$IAS_HOME/bin/jdbcsetup
Driver Identifier: Oracle_Type4_816 (whatever name you like)
Driver Classname: oracle.jdbc.driver.OracleDriver
Driver Classpath: .../classes12.zip (install this this zip file somewhere
and add this zip into the Classpath later).
2) DataSource Setup:
start iAS Administration Tool (iASAT)
Choose Database, unfold iAS1 (your app server instance),
choose External JDBC Datasource -> add: DataSource Registration
JNDI Name: yourPoolName
Driver Type: Oracle_Type4_816 (select what you just register)
DataSource Url: jdbc:oracle:thin:@hostName:portName:dbName
Username: your_user_name
Password: your_passwd
(Datasource Pool: using defaults for now): you can also customrize the
parameters for the pool.
3. Add classes12.zip into CLASSPATH.
In your application, you can use JNDI lookup to get the DataSource from
which you get the connection from the pool.
Hope this helps.
Good luck.
Xuran
"Jacky Yan" <[email protected]> wrote in message
news:9m0tmp$[email protected]..
Hi,
Does anyone who hows to config the oracle database connection pool in IAS?
Thanks so much!!!
[email protected]
Jacky

How to config History Log Changes Document for Mkt Plan/CPG/TP?

Working in SAP 4.0...
Dear Expert,
I want to save the document changes for Marketing Plan, Campaign and Trade Promotion.
How to config the document changes, since the information that recorded not complete.
Please help....
BR,
Robin

Hello Robin,
In CRM 4.0 follow the below path:
SPRO --> Customer Relationship Management --> Marketing --> Marketing Planning and Campaign Management --> General Settings --> Edit Categories for Change Documents
Then maintain the entry for application as MKT for each entry, then under object type: CPG, CPT, MPL, MPT, TPM, TPT and then Check box the entry under change document for all the entries.
If you want to display the change log history use report : CRM_MKTPL_CD_DISPLAY in CRM 4.0
Thanks & Regards
Raja Pamireddy
CRM Marketing Forum Moderator

How do i clear a huge backup for my printer waiting in my computer?

How do I clear a huge backup for my printer waiting in my computer?

Hey luddite58!
You can either open the print queue and remove them by clicking 'Printer' and then 'Cancel all documents' but some people find an easier way is to use our print diagnostic utility which you can download here.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to config the proxy of Bpel process manager(with password)

HI, i met the quetion as below
The The Oracle BPEL Process Designer & Manager server is installed on my computer in domin of my company, so if One of the BPEL processes deployed on the BPEL server needs to access a synchronous Web service hosted outside the firewall .i need to config the proxy, but the proxy of my company needs my ID and password to access outside . after I congfig the proxy
option of designer and build the Process, there will be pop-up a dialog box and ask for my ID & password .But how i config the proxy of Bpel process manager?? I read the tecnote about HTTP Proxy Configuration and config the proxy in the obsetenv.bat ,but it seems has no information about my ID&password in obsetenv.bat.
The question is How can i let the Bpel process manager know my proxy and ID&password ?? pls help me ,thx!

I have set these value in obsetenv.bat as follows, and I restart the Bpel manager server and designer.
but the same issue still occur:
set OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=pxysha" "-Dhttp.proxyPort=8080" "-Dhttp.proxyUser=oocldm\hanfi" "-Dhttp.proxyPassword=123456" "-Dhttp.nonProxyHosts=localhost".
At the same time, I have set proxy server in bpel designer of eclipse, after I build the process,it can works well(which display BUILD SUCCESSFUL), but the bpel server display error message as below :
Exception Name:
Failed to read wsdl
Exception Description:
Error happened when reading wsdl at "C:\orabpel\domains\default\tmp\.bpel_TerraFlow_1.0.jar\TerraServiceRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: Server returned HTTP response code: 407 for URL: http://terraserver.microsoft.com/TerraService.asmx?WSDL".
what happen ?

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to get the "last changed by" for a set of function modules?

How to get the "last changed by" for a set of function modules?
is there any table to get it??

See [this|Re: Date of creation of function module] I posted earlier.
>TFDIR will give you the name of the function group program and the include number.
>E.g. SAPLZFUNCGROUP Include 01.
>From this you can construct the include name: LZFUNCGROUPU01.
>You can look this up in TRDIR to find the creation date (CDAT) of the function module.
In your case, you need unam and udat.
matt

How to config the levels of backup for partioned cache?

Similar Messages

Maybe you are looking for