Envelopes and addresses merge.how to do using office 2013

I have just purchaed Laptop and office 2013, and with my old computer I was able to tick and print all my envelopes from my data base. I would like to know how I can do this on my new computer.My data base has been transfered to my new laptop, however the info was on windws vista, uncompatable with 2013 office edition. Will I be able to accomplish this without additional soft wear. Thank you for any assistance you may give.
Many thanks
Don

Prouty wrote:
.. .My data base has been transfered to my new laptop, however the info was on windws vista, uncompatable with 2013 office edition. ....
Hi,
What is the old database name ? We can't help unless we know the old database package.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Word and Excel Documents Won't Open Using Office 2013

We recently upgraded to Office 2013 (running Windows 7 Pro), and now when I try to open a word document by double-clicking (either from windows explorer or an attachment in outlook), it frequently opens a blank box but not the file. I have to close
the box and retry by right-clicking and then open, but often have to try several times. Any help would be greatly appreciated!

Hi Rosa,
Please try to repair your Office as a quick fix.
If that doesn't help, try the following methods:
Excel:
Delete or rename the "ddeexec" key under:
HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\
And delete or rename the "command" string under:
HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\command\
Word:
Delete or rename the "ddeexec" key under:
HKEY_CLASSES_ROOT\Word.Document.12\shell\Open
And delete or rename the "command" string under:
HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\command
Max Meng
TechNet Community Support

I Have and iPhone and iPad. How can i use Finder my iPhone for both devices.

I Have and iPhone and iPad. How can i use Finder my iPhone for both devices?

http://itunes.apple.com/us/app/find-my-iphone/id376101648?mt=8
That app is also compatible with the iPad and requires iOS 3.1.3 or later.

How can I use Office Update without the Office CD?

How can I use Office Update without the Office CD? On the microsoft website I've clicked the options which mean I shouldn't need the CD (which wasn't supplied with the laptop), but poartway through updating the service pack I get a request for the Office 2000 Professional CD.
Any suggestions?

Hi
Did you mean a Office or One Note?
As far as I know the One Note is a part of the Recovering Image and the CD is not delivered with the unit. Furthermore the Toshiba units are not delivered with the Office 2000 software.
Nevertheless, did you check the update function in the Help i.e. in Word?
There you will find a options called Check for Updates
http://office.microsoft.com/en-us/officeupdate/default.aspx
Bye

Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work

User Configuration/Policies/Administrative Templates
- Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work
Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations
- Allow Trusted Locations on the network:
Enabled
- Trusted Location #1:
Enabled
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
Date: June 10, 2013
Description: Trusted Location
Allow sub folders: Enabled
The policy appears to apply to the client correctly by adding the following registry key and values:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\word\security\trusted locations\location1
allowsubfolders: 1
date: June 10, 2013
Description: Trusted Location
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
However, when you open Word Options/Trust Centre/Trust Centre Settings…/Trusted Locations
There are no trusted locations listed under ‘Policy Locations’
I have tried setting similar settings for setting the Shared Templates folder location and just like the trusted locations policy, the registry keys are created properly in HKEY_CURRENT_USER\Software\Policies however word doesn’t
seem to recognize these either.
This used to work flawlessly using the administrative templates for Word 2007 and 2010. Has anyone been able to get these policies to apply successfully, or know why office doesn’t recognize these settings from the Policies registry
Key?

This would have been an easy solution to the issue. Unfortunately it isn't the problem. This question was originally posted on another Microsoft site and
was transferred here and when it was transferred the path's changed from the original post:
\\server\sharedfodlername to //server/sharedfoldername. (I will edit the question to show up as it did in the original post) Not sure how that happened. This
is still an issue that I haven't been able to get working correctly.
As it turns out the 'New from Template' interface Word 2013 has developed is very bulky with large thumbnails and is not very customizable nor practical for an office
that has a large number of templates. Because I am unsatisfied with the display and performance of the 'New' template chooser I sought after a solution to change the way word creates a document from a template in another thread:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/how-can-you-change-the-display-of-templates-in/d49194b9-a6b4-4768-8502-7d7b50e9dd65 working through this issue with Jay we were able to develop
some VB script with handles a very large number of templates in a list view and it works much faster than the built-in Word interface. The above thread is how I've worked around trying to define a shared template location and I am quite happy with it.

The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
Thanks

Nicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
    <Product ID="ProPlusVolume">
      <Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
    </Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks

Cannot OpenDatabase (MSAccess mdb file) using VB6 code on windows8 64 bit machine using office 2013.

I have a "mdb" file which is created long back in MSAccess 97 or 2000. I am using Office 2013.
When I tried to open the mdb file from my application using below code written in VB6, It works fine in Windows 7 64 bit machine but It is not working in Windows 8 64 bit machine.
If I use office 2010 again same code works fine in both Windows 7 and 8 64 bit machines.
Set gWork = DBEngine.CreateWorkspace("", "admin", "", dbUseJet)
Set gCache = gWork.OpenDatabase(DataPath & fFilePath & "\connec00.mdb")
I have a referenced "Microsoft DAO 3.51 Object Library" for the code.
I tried changing it to "Microsoft DAO 3.6 Object Library" also but still the problem is not resolved.
Can anyone please help me in figuring this out ??

Dear Bruce,
Thanks for your reply.
Code was written in VB6. My VB6 application will try to open a "connec00.mdb" file and will read the data in it for displaying in the application.
For opening the database by the application the code was written like below
On Error GoTo Herr
Set gWork = DBEngine.CreateWorkspace("", "admin", "", dbUseJet)
FLog.Addlog "File exists: Connecting to database..."
Set gCache = gWork.OpenDatabase(DataPath & fFilePath & "\connec00.mdb")
Herr:
FLog.Addlog "Error(Class_Initialize - DataConnector): " + Err.Description + " in " + Err.Source + Chr(10) + Chr(13) + "Init: Going on execution..."
If I manually open the "mdb" file both in windows 7 64 bit and windows 8 64 bit using MSAccess 2013, I will get the error
"cannot open a database created with previous version of your application".
On Windows 7 64 bit
Through my VB6 code the mdb file is opened (does not launch MSAccess) by my application and reading is done perfectly which inturns helps the application to display the data in the mdb file. (even though manually if I cannot open)
On Windows 8 64 bit
Through my VB6 code the mdb file is not able to open the database by my application.
It is going to Herr: part when it tries comes to that "OpenDatabase" step and it prints nothing in the log (Err.Description )also.
(This is seen only for Windows 8 64 bit) . In Windows 7 64 bit Herr part does not even hit.
Configuration wise I have checked both are same. Please let me know in case of furthur clarification or anything if I miss..
Thanks for your co-operation.

New Pages and Address Merge

What happened to Address Merge Fields in the new pages? I was use to drag and drop from address book.
Richard

Pages 4.3 should still be in an iWorks folder within your Applications folder. Use that unitl Apple gets Pages 5 in order.
Help them do so:
http://www.apple.com/feedback/pages.html
And rate on the App Store!

How to sync calendar and contact with Galaxy S2 and iCal and Address Book, how to sync calendar and contact with Galaxy S2 and iCal and Address Book

I have a Galaxy S2, gmail account, hotmail account and want to know the best way to be able to sync calendar and contacts from the Galaxy S2 with iCal and Address Book. I want to be able to make changes on any device and be able to sync the changes. Hotmail is my main email account and would prefer to use tha account but I know that the Galaxy prefers Google. Any ideas?

You have several ways to sync your phone to a mac.
You can use Samsung Kies for mac. You can download it here.
You can also use Google for it. Open Adress Book, click Adress Book on the left top of the screen, click Prefferences and open the Accounts tab. You'll see a "Synchronize with Google" checkbox, click it, enter you mail and password and you are good to go.
On iCal go to Preferences (top left, click iCal to see it), open the Accounts Tab, you'll see a blank list on the left, at the bottom of it there is a "+" sign, click on it and select Google on the Account Type dropdown list, enter your account details and you are done.
Third way to do it is by using third party software such as SyncMate.
Hope any of these alternatives solve your problem!
(The iCal and Address Book instructions are for Snow Leopard, but it should be almost the same on Lion)

HT1688 My daughter and I both have and iPhone. How do I use my iPhone or the cloud to locate her?

My daugher and I both have an iPhone. How can I use my iPhone or the cloud to locate her in case of an emergency. Is there a way to do that without paying for an upgrade or additional services through a separate vendor??
Thanks!

find my friend http://itunes.apple.com/us/app/find-my-friends/id466122094?mt=8

How do I activate Office 2013 that I have deployed using ODT and App-V onto a Remote Desktop Server?

I am setting up a demo Server 2012 R2 environment (1 DC server, 2 RDSH servers, 1 App-V server).
I have created an Office 2013 volume license App-V package using the latest Office Deployment Toolkit. I have deployed the App-V package to an RDS server and it all works fine. However, I am unable to activate Office 2013 using the MSDN Office 2013 retail
key because it tells me the product key is invalid for this version of Office. I've looked at the alternative of using the App-V Sequencer to create the Office 2013 package, but from what I've read this is not a Microsoft supported method.
Is there any way that I can activate Office 2013 (volume license on RDS) using the method I've outlined above, or is there any way of using the Office2013 download from MSDN such that it can be packaged by the ODT (or App-V Sequencer) for successful deployment
using App-V and activation using the retail Office 2013 product key on MSDN?

True, VL channel media can't be activated with MSDN Retail pkeys (that's what I was trying to get you to understand, I figured you would be attempting that, as so many people do :(
I've not attempted your scenario myself.
It sounds like you aren't following the supported scenarios as (poorly) described by MS;
The way I read their guide, for an RDS scenario, you must use a VL key [either MAK or KMS] (since a subscription product+key can't be used on RDS):
i.e.: <Product ID="ProPlusVolume">
http://support.microsoft.com/kb/2772509
http://support.microsoft.com/kb/2915745
http://technet.microsoft.com/library/dn481351.aspxhttp://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
So, that all means that for RDS, you can't use anything other than VL "product" (in
the form of an ODT-generated output) with a VL pkey. So, for your RDS demo setup, you need to use real product and real pkeys.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I purchased iWork apps for iPad (pages, numbers and keynote). How do I use MobileMe to upload docs from my PC to iPad? Janet Frustrated

I purchased iWork apps for iPad (pages, numbers and keynote). How do I transfer files from my Laptop PC to the cloud for my iPad? Thanks! Frustrated Janet

Greetings Janet,
Read here: http://www.apple.com/mobileme/news/2010/09/iwork-for-ipad-apps-now-support-mobil eme-idisk.html
Login to your iDisk on the windows machine and then click on the Home on the left.
Upload whatever documents you want access to on your iPad to your iDisk.
Once you have the desired files on your iDisk you go to the app on your iPad you wish to work with tap the sharing button (little arrow going down into a box) which will give you an "iDisk" option and you'll see the files there.
Hope that helps.

How do I use infopath 2013 with visual studio 2013 to modify forms with code?

Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
Timothy

Hi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards

Unable to edit document from SharePoint 2007 using Office 2013 and IE 11

I am getting the following error when I try to edit a document from SharePoint 2007: "Edit document
requires a Windows Sharepoint services-compatible application and Microsoft Internet Explorer 6.0 or greater". I am using Windows 7 with Office 2013 and Internet Explorer 11. Troubleshooting steps that I've tried so far (that haven't worked) are as follows:
1) repaired Office; 2) switched from 64 bit version of IE to 32 bit version; 3) moved the owssupp.dll from C:\Program Files (x86)\Microsoft Office\Office14\ to C:\Program Files (x86)\Microsoft Office\Office15; 4) tried removing old versions of Office (but
I still need to use Office Communicator 2007 r2 and couldn't figure out how to get rid of the Office14 files from Program Files); and 5) running SharePoint in IE compatibility mode. Please advise...thanks!

Hi,
It seems you installed mixed version Office2007/2010/2013 on your client machine?
I would suggest you remove all Office 2007 and 2010 version, and reinstall Office 2013(include Office Tools->Microsoft SharePoint Foundation Support component) on your machine, and make sure "Open SharePointDocuments class" add-on is enabled
from IE11, then check if it could fix the issue.
If above works, please test again after installing the Office Communicator 2007 r2 on your machine.
http://social.microsoft.com/Forums/en-US/3e8c0976-2794-49a2-92fe-6a254b3cc4ca/a-microsoft-sharepoint-foundation-compatible-application-could-not-be-found?forum=projserv2010setup
http://blogs.technet.com/b/emeaoffice/archive/2013/04/29/you-get-an-error-message-when-you-open-an-office-file-from-sharepoint-on-a-computer-on-which-you-installed-more-than-one-version-of-office.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

How can i use office work in iMac?

I want have microsoft work in Imac and relate to my Ipad, which one is the better one should I choise? because it have a lot difference choice in app store

Microsoft Works doesn't run under Mavericks.
Microsoft Office (v 2008 and 2011) run in Mavericks. I think they have just released some iPad versions, but they must be purchased as a subscription service with Office 2013 in order to actually use the programs.
Pages, Numbers, and Keynote can all open, edit Office documents, but they are completely different user experiences from Office. I prefer them due to their clean, simple interfaces, but they won't have all the features you have in Office.
They have iPad versions.
There are also Office alternatives, LibreOffice, NeoOffice, but they don't have iPad versions. They are also not in the App Store (last I checked).

Envelopes and addresses merge.how to do using office 2013

Similar Messages

Maybe you are looking for