EnvironmentException: -600: Could not retrieve a datasource connection

Hi,
I am getting below errors in my logs has anybody have any idea about below errors.
0.4 IJFWK-302 itseelm-lx4065.xxx.com 2013-02-12 05:55:40 EBCCOP01 971 NA BsGetDeliveryMethods irwuser irwuser EBCCOM01 28442421A3EF52E9C8692AA9F19FFC42 37 <?xml version="1.0" encoding="UTF-8"?> <SystemError><Message>-302: Error caught while executing the business task. Marked transaction for rollback; nested exception is: com.xxx.xxxx1.util.exception.EnvironmentException: -600: Could not retrieve a datasource connection for user 'null'.; nested exception is: com.ibm.websphere.ce.cm.StaleConnectionException: The Network Adapter could not establish the connectionDSRA0010E: SQL State = 61000, Error Code = 20</Messa
Thanks
Edited by: Ramstimo on 15 Feb, 2013 9:34 AM
Edited by: Ramstimo on 15 Feb, 2013 9:36 AM

Hi,
Can you paste the jdbc connection that you have used in your application code here?
Regards,
Kishore

Similar Messages

Could not retrieve connection info from torque connection pool

Hi,
I am using Apache Torque for making connection with my Oracle 9i server.
My Torque.properties file configuration is as follows:-
torque.dsfactory.cpm.factory=org.apache.torque.dsfactory.SharedPoolDataSourceFactory
torque.dsfactory.cpm.pool.maxActive=10
torque.dsfactory.cpm.pool.maxWait=60
torque.dsfactory.cpm.pool.testOnBorrow=true
torque.dsfactory.cpm.pool.validationQuery=SELECT 1 from dual
torque.dsfactory.cpm.connection.driver = oracle.jdbc.driver.OracleDriver
I am getting the following error:-
Caused by: org.apache.commons.dbcp.SQLNestedException: Could not retrieve connection info from pool
at org.apache.commons.dbcp.datasources.SharedPoolDataSource.getPooledConnectionAndInfo(SharedPoolDataSource.java:169)
According to me the cause of error is because of the database connection was not available in the connection pool. Or it might be due to The connection was not closed properly becuase of the some issue in the persistent layer.
My Research till now:-
Checked all the connection object properly closed in my classes as well as Torque Classes.
Do anyone have any idea regarding this error. If yes, please suggest some solution for it.
----Anurag----

Hi,
I have my complete Torque.properties file, just for the reference, I have pasted few lines from my torque.properties file. Secondly, I am using the JDBC Driver for my oracle connection & its working fine. The problem is when my application tries to access connection from connection pool, & if it finds no connection in the pool it gives error. After increasing the size of the connection in the pool, still I am getting the same error. Do you have some idea regarding this.

De.avetana.bluetooth.connection.BadURLFormat: The URL could not retrieved:

Hi All,
Please help me to fix this error. Do I have to initialize the BlueZ stack. Well, I've tried to initialize the BlueZ stack but failed to do so... Err, is it probably I didn't initialize it in a proper way ?? ... please please please help me. I'm so sick of this error.
Now Searching for Services ..........
Service search completed .....
SERVICE_SEARCH_COMPLETED
Service URL: null
java.io.IOException: de.avetana.bluetooth.connection.BadURLFormat: The URL could not retrieved: Protocol not supported!
java.lang.NullPointerException
at JBluetoothBrowser$BToothInquirer.serviceSearchCompleted(_J_BluetoothBrowser.java:242)
at de.avetana.bluetooth.stack.BlueZ$1.serviceSearchCompleted(BlueZ.java:613)
at de.avetana.bluetooth.stack.BlueZ.serviceSearchComplete(BlueZ.java:770)
at de.avetana.bluetooth.stack.BlueZ.listService(Native Method)
at de.avetana.bluetooth.stack.BlueZ$2.run(BlueZ.java:628)
at java.lang.Thread.run(Unknown Source)
regards
Zalfarienty

Please send me your file and we could debug to you.
Or
Post to Bluetooth Forums, so everybody could fix for you!
http://forum.vietcovo.com - http://vietcovo.com

ODI-26029: Could not deploy the datasource automatically

Hello All,
I have deployed a Java EE agent as "ODIJavaAgent" on Managed server "odi_server1" on port 8001. Generated the server template from ODI studio and also agent test was successful. However when I try to deploy the data sources for e.g. work repository or data server, after dragging them on Data source tab of the agent, I am getting below error.
Please help on this.
Note: Weblogic was up and running during the process.
java.lang.RuntimeException: java.lang.RuntimeException: ODI-26029: Could not deploy the datasource automatically.
at oracle.odi.ui.framework.adapter.DefaultAdapter.executeBackgroundTask(DefaultAdapter.java:611)
at oracle.odi.ui.framework.UIFramework.executeBackgroundTask(UIFramework.java:347)
at com.sunopsis.graphical.dialog.SnpsDialogDeployDatasource.dialogOkActionHook(SnpsDialogDeployDatasource.java:73)
at com.sunopsis.graphical.definition.DialogDefinitionNode$1.vetoableChange(DialogDefinitionNode.java:407)
at java.beans.VetoableChangeSupport.fireVetoableChange(VetoableChangeSupport.java:335)
at java.beans.VetoableChangeSupport.fireVetoableChange(VetoableChangeSupport.java:253)
at oracle.bali.ewt.dialog.JEWTDialog.fireVetoableChange(JEWTDialog.java:1472)
at oracle.bali.ewt.dialog.JEWTDialog.dismissDialog(JEWTDialog.java:1502)
at oracle.bali.ewt.dialog.JEWTDialog$UIListener.actionPerformed(JEWTDialog.java:1894)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2319)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6288)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
at java.awt.Component.processEvent(Component.java:6053)
at java.awt.Container.processEvent(Container.java:2042)
at java.awt.Component.dispatchEventImpl(Component.java:4651)
at java.awt.Container.dispatchEventImpl(Container.java:2101)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2479)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:614)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:179)
at java.awt.Dialog$1.run(Dialog.java:1051)
at java.awt.Dialog$3.run(Dialog.java:1099)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1584)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:843)
at java.awt.Dialog.setVisible(Dialog.java:987)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:397)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
at oracle.odi.ui.framework.adapter.DefaultAdapter.displayDialog(DefaultAdapter.java:242)
at oracle.odi.ui.framework.UIFramework.displayDialog(UIFramework.java:88)
at com.sunopsis.graphical.frame.edit.EditFrameSnpAgent$DatasourcePane$2.actionPerformed(EditFrameSnpAgent.java:1353)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2319)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:358)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:810)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6288)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
at java.awt.Component.processEvent(Component.java:6053)
at java.awt.Container.processEvent(Container.java:2042)
at java.awt.Component.dispatchEventImpl(Component.java:4651)
at java.awt.Container.dispatchEventImpl(Container.java:2101)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2479)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:614)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:175)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:162)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.lang.RuntimeException: ODI-26029: Could not deploy the datasource automatically.
at com.sunopsis.graphical.dialog.SnpsDialogDeployDatasource$1.doInBackground(SnpsDialogDeployDatasource.java:97)
at oracle.odi.ui.framework.AbsUIRunnableTask.run(AbsUIRunnableTask.java:258)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:656)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.edit'. Resolved 'weblogic.management.mbeanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at oracle.odi.wls.datasource.creator.WLJMXConnectorCreator.createJMXConnector(WLJMXConnectorCreator.java:34)
at oracle.odi.wls.datasource.creator.WLDataSourceDeployer.deployDataSources(WLDataSourceDeployer.java:33)
at com.sunopsis.graphical.dialog.SnpsDialogDeployDatasource.doGenerateWLDataSources(SnpsDialogDeployDatasource.java:374)
at com.sunopsis.graphical.dialog.SnpsDialogDeployDatasource.access$1(SnpsDialogDeployDatasource.java:363)
at com.sunopsis.graphical.dialog.SnpsDialogDeployDatasource$1.doInBackground(SnpsDialogDeployDatasource.java:88)
at oracle.odi.ui.framework.AbsUIRunnableTask.run(AbsUIRunnableTask.java:258)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
... 1 more
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.edit'. Resolved 'weblogic.management.mbeanservers' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.edit'. Resolved 'weblogic.management.mbeanservers']; remaining name 'edit'
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1035_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:423)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:179)
... 11 more
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.edit'. Resolved 'weblogic.management.mbeanservers'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Cheers,
Andy.

What do you mean by deploying the data source? You did this DS addition to agent before generating the template right?

Could not retrieve the in-memory service URL after starting the in-memory.

A local jvm process is discovered but mission control will not connect.
Both jvm process and mission control are on the same host.
Any suggestion?
Thanks.
This is the mission control help version:
Oracle® JRockit Mission Control 3.1.0 (R27.6.3-40_o, 112101)
I'm running mission control and a jboss web server on jrockit:
$ java -version
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
BEA JRockit(R) (build R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64, compiled mode)
On linux:
$ uname -a
Linux isidore 2.6.27-11-generic #1 SMP Wed Apr 1 20:53:41 UTC 2009 x86_64 GNU/Linux
This is the message that appears in the controlling tty window:
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
SEVERE: Could not retrieve the in-memory service URL after starting the in-memory agent!
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
Here is the exception in the dialog details:
Could not open Management Console for [1.6] JBoss (5,474).
java.lang.NullPointerException: null
java.lang.NullPointerException
     at com.jrockit.mc.rjmx.ConnectionDescriptorToolkit.getHostName(ConnectionDescriptorToolkit.java:152)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:521)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:144)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.establishConnection(RJMXConnectorModel.java:111)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.connect(RJMXConnectorModel.java:154)
     at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:95)
     at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:61)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:38)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:74)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

After I posed the above, I saw that the url on the exception is munged.
I didn't stumble over how to manually override that url.
Instead, I added remote jmx capability to the process and added a connector. That is my work around.
Thanks,
John

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Could not retrieve Enterprise Global Template - Load balancer issue

Hi,
We have 4 Project Server 2010 servers. The 4 web servers are load balanced by networking team with sticky session configured.
When we try to connect to the Project Server using MPP 2007 SP2, it fails saying 'Could not retrieve Enterprise Global template'. It works perfect when we point to a specific server by specifying the IP address for server name in the 'hosts'
file.
Earlier we observed some errors in the event viewer related to the SharePoint's internal load balancer for which restarted the 'Project Server Application' on each web server and it got fixed.
Now, the only entries that we see related to load balancer are as mentioned below as Information (not errors).
SharePoint Web Services Round Robin Service Load Balancer Event: Initialization
Process Name: w3wp
Process ID: 15080
AppDomain Name: /LM/W3SVC/539065287/ROOT-1-130462463500778047
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:ae7c7ee5c09b4e8198bdbb1ecb8c1c1b#authority=urn:uuid:9f626d347784423eb14bde4a1f4d13fc&authority=https://lonms12546:32844/Topology/topology.svc
Active Endpoints: 4
Failed Endpoints:0
Endpoint List:
http://lonxxx2532:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2545:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2546:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2566:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
Could the issue be due to network load balancer?
Could the issue be due to Sticky session configuration on the load balancer.?
How can we get to the root cause of the issue?
Which logging category should we set to 'Verbose' that can give us some hint.
Update: We tried to capture the requests through fiddler and observed that when fiddler is running on the client computer then the connection works perfectly fine even through the load balancer. Probably fiddler is reformatting the SOAP
envelop of the web service requests the way it should before sending the request to the server.
If we do not run fiddler and run some other similar tool (like Charles) then it again gives the issue and the request stucks at /PWA/_vti_bin/psi/winproj.asmx
We ran Wireshark on the servers and found the following for that web service call:
[TCP Previous segment not captured] Continuation or non-HTTP traffic.
Please let me know if someone could provide any hint what can be done next.
Regards, Amit Gupta

There are several ways to configure your load balancer. I would suggest that you work with the network engineer, the load balancer vendor and your project administrator to resolve this issue.
Basically you need URL to be resolved correctly. Also, I don't believe PS2007 did a good job handling load balancing, so you may need to bring someone in good with IIS and see they can tweek IIS to manage the cache better.
As I go back and look at your analysis, I think you should probably look at upgrading to Project Server 2013. They made some improvement in load balancing and the management of distributive cache.
I assume you have 4 WFE because you have thousands of project users. Roughly how many you have? Over 1000, over 5000
Have you tried to see if using two load balancing work? How about just one front end. I often see companies scaling SharePoint and Project server to extremes.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Seeburger AS2 - DECRYPTION_ERROR - Could not retrieve certificate

Hi
Can anyone suggest a reason why I am getting this error regarding failed Decryption:
Error while parsing AS2 message: DECRYPTION_ERROR # Error while loading decryption certificate: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve certificate TRUSTED\STEVEB\XX.com.seeburger.ediint.edi.EDIMessageException: cannot decrypt message (certificate or private key missing)
I am pretty sure that the configuration is correct...
Configuration:
[View Creator Role|http://i1111.photobucket.com/albums/h469/SBentley2011/ViewCreatorRole.png]
[JCA Connection Factory |http://i1111.photobucket.com/albums/h469/SBentley2011/connectionFactory.png]
[Keystore View|http://i1111.photobucket.com/albums/h469/SBentley2011/keystore.png]
[PI7.1 Config|http://i1111.photobucket.com/albums/h469/SBentley2011/config.png]
BTW I am using PI7.1 ENH 1 and Seeburger 2.5.1
Thanks for looking.
Edited by: Andy Cliff on May 25, 2011 12:40 AM

Hi
Really strange, but no joy at all. Even going for the alternative 'Code Based Access' option described below, I continually get Error:
java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve certificate
_Code Based Access to the SAP Keystore_
Creating/Inserting a New Certificate
1. Create a personalized key store view. Certificates and private key entries should be stored in this
view.
2. Using the Security tab of the key storage service web interface, assign the following list of
permissions to the codebase of the adapter in use:
4. Note that permissions that are view based only need to be set once per view and
codebase/domain combination, but entry based permissions need to be set for each entry in the
view to the codebase/domain!
5. Open the NetWeaver Administrator - Application Resources and select the JCA Connection
Factory for the respective adapter. In the lower pane, select the Configuration Properties and
adjust the adapterUser to an empty String (delete the previously entered name). This disables the
user based access and enables code based access. Do not forget to Save your changes.
The following table lists the adapters and the corresponding codebases/domains:
SEEBURGER Adapter Configuration for SAP NW Process Integration 19
In case you experience errors which read as "Reauthentication failed" or "Error
construction implementation" you might need to restart the J2EE server
u2022 VIEW_ALIASES
u2022 GET_VIEW
u2022 LIST_VIEW
u2022 IS_VIEW_EXISTS
u2022 FIND_ALIAS
u2022 LIST_ENTRY
u2022 READ_ENTRY
u2022 IS_ENTRY_A_KEY
u2022 IS_ENTRY_EXISTS
u2022 CREATE_ENTRY_AT_VIEW (for pending keystores)
4. Note that permissions that are view based only need to be set once per view and
codebase/domain combination, but entry based permissions need to be set for each entry in the
view to the codebase/domain!
5. Open the NetWeaver Administrator - Application Resources and select the JCA Connection
Factory for the respective adapter. In the lower pane, select the Configuration Properties and
adjust the adapterUser to an empty String (delete the previously entered name). This disables the
user based access and enables code based access. Do not forget to Save your changes.

Problem with CDN - Could not retrieve the cdn enpoints in subscription with id...

I tried to set-up a CDN endpoint over a storage account last night and kept getting 404. suspecting that this is just time to propagate I called it a day.
This morning when I went to look again - my CDN endpoint was not visible in the portal and instead I get the warning.
I tried to set-up a new endpoint and that fails too, now I have two warnings -
Could not retrieve the CDN endpoints in subscription with ID '34280cfc-814c-4d35-8836-0ec2b7ce68e7'.
Could not retrieve the CDN endpoints in subscription with ID '440d3de7-23fd-424f-8961-a57f6f6384ed'.
Any thoughts?
Yossi Dahan - http://yossidahan.wordpress.com - [To help others please mark replies as answers if you found them helpful]

Hi,
This issue is reported at Azure Status:
https://azure.microsoft.com/en-us/status/#history below is the detailed information, the incident has now been mitigated.
7/30
CDN - Multi-Region - Partial Service Interruption
This incident has now been mitigated. From 30 July, 2014, at 06:00 to 18:28 UTC, engineers received reports of an issue in which CDN customers might experience issues while creating new CDN connections and accessing their existing content. Error messages
indicated "Warnings occurred while loading the management data for this resource type" and "Could not retrieve the CDN endpoints in subscription with ID". Preliminary investigations indicate that this incident was caused by a misconfiguration of Network endpoint
connecting to the service, and engineers implemented a configuration change to mitigate impact.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error ADS: com.adobe.ProcessingException:Could not retrieve(200101)getting

Hi,
In our development system CD2(ECC backend system) when I am acessing t-code PHAP_CATALOG_PA->Category Group/Category/Template>Zero Harm>DRA JKSW2>Preview --->Print Layout giving below error.Here PD7( Dev portal ) is acting as frontend.
Error :
ADS: com.adobe.ProcessingException: Could not retrieve(200101)
Message no. FPRUNX001
Diagnosis
An error occurred when Adobe Document Services (ADS) was launched.
System Response
Error message
Procedure
When troubleshooting, follow the steps described in SAP Note 944221.
First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
Please help in this case.
Regards
Nilesh

Hi,
Perform the ADS configuration check as specified in : http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f0638873b56bede10000000a11466f/frameset.htm
You need to check all the configuration steps to makesure everything is setup right. Also, try after restarting your Java engine where ADS is installed. Check your ADS RFC connection using SM59 tcode, and check whether ADSUSER and ADS_AGENT are not locked.
Try and let know.
Regards,
Shahid.

ADS com.adobe.ProcessingException : Could not retrieve credential for alias

Hi,
I have configured ADS in NW730 EP system which is connected to ECC 6.0 system.
When i perform the configuration tests in SA38 as per note 944221 ,
i get the following error when executing FP_TEST_IA_01
ADS com.adobe.ProcessingException : Could not retrieve credential for alias : ReadersRights(200.101)
I have installed the credentials in the \usr\sap\<SID>\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials
Please help me with the situation

Hi Florian,
In my case the NW is 731. In NWA / Configuration / Infrastructure / Adobe Document Services / Documento Security, I put the pfx file through Manage P12 files... After this I added ReaderRights Alias and password that SAP sent me with pfx file.
But after configured this alert message appear:
"Could not retrieve the expiry date of the selected credential. This means that either the entered password is incorrect, or no JCE (unrestricted version) installation is available. See SAP note 1294782 for further details"
I think that this is my problem. I think that because this message that FP_TEST_IA_01 report doesn't run. I've already updated JCE files and password is correct because SAP sent me.
Regards,
Alexandre

Weblogic 10.3 deployException: Could not encrypt password for connection

Well, I guess this is my first time posting in a forum.
My problem is that, when trying to run my servlet, using a jdbc:odbc connection
to an Access-database, I get the following error in the server log:
Running dependency analysis...
2009-03-27 16:59:40.106: Writing WAR file to C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\TableViewApplication\TableViewApplication-tableviewproj-webapp
2009-03-27 16:59:40.12: Wrote WAR file to C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\TableViewApplication\TableViewApplication-tableviewproj-webapp
ERROR: Could not encrypt password for Connection TBLViewConnect.
The connection I'm using works fine when testing it with the JDeveloper's SQL editor.
It's properties are:
Connection Name: TBLViewConnect
Connection Type: JDBC-ODBC Bridge
as well as username, password and a local datasource
I'm running JDeveloper 11.1.1 on Vista 32bit
Besides, it's my first time using a database-connection with a servlet
thanks for your help

guess I could have found that earlier ;)
I just had to uncheck the "save password" option in the connection menu and write it in the getConnection() method instead.

Problems with PPTP VPN server authentication - Could not retrieve key agent account information

Errr so far switching to a mac based server has been a mess. I have had it with permission issues!!
Here is my latest problem. After rebuilding the server several times my VPN clients can't connect. Every other time it has been fine but for some reason its just not working. I did recreate the vpn from a back up. I am not sure if that has anything to do with it. Anyway below is the error I am getting. Anyone have any idea what is causing it? You have all already been so helpful. Thank you very much!
DSAuth plugin: Could not retrieve key agent account information.
DSAuth plugin: MPPE key required, but its retrieval failed.
CHAP peer authentication failed for joel

Thank you for your help John. Before I could even employ your suggestion the server crashed. I don't understand why I am constantly dealing with these issues. I cloned the install to a new HDD and then did a reinstall. That fixed VPN, so far so good. But talk to me next week, something else will happen I'm sure.

Could not retrieve Entreprise global template

I just installed Project 2010 Pro & Server, both seems to be working ok by their own, but when i try to connect Pro to Server I keep getting the message "Could not retrieve Enterprise global template. There seems to be a problem with the database,
please contact your server administrator.", so it just work with no connection. I have tried it with two different PCs (desktop & laptop) and the result is the same.
My config:
Windows Server 2008 R2
SQL Server 2008 R2
SharePoint Server 2010 Enterprise (14.0.4763.1000)
Project Server 2010 (14.0.4763.1000)
Project Professional 2010 (14.0.4760.1000 32-bit)-(Windows 7)
Since the error comes from Project Professional I posted this here, even when it might be cosidered also a Server issue. Anyways, I really need to fix this so any help will be very welcome.
Thanks.

Good news!
Working around with your last question, I logged on to my laptop with two different users, the Administrator and a Portfolio Manager creating their correspondent Project Server accounts, and both worked fine! So I came back to my user and completely deleted
the definition of the Project Server account, created it again from 0 and it worked perfectly.
I had previously the server with the beta version of Project Server 2010, when I installed the final version (different server name) I just changed the URL on my local Project Server account, it seems that it doesn't work like that, either you create a new
account or delete and recreate the current if you want to use the same name, that worked for me.
Thanks for your advice, hopefully this might help someone else.

ERROR: Could not retrieve a valid windows identity

When I try to create PowerView reports from BISM connection file, I get error:
<MoreInformation>
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message>
<MoreInformation>
<Source>Microsoft.AnalysisServices.AdomdClient</Source>
<Message/>
<MoreInformation>
<Source>Microsoft.SharePoint</Source>
<Message>Could not retrieve a valid Windows identity.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>WTS0003: The caller is not authorized to access the service.</Message>
</MoreInformation>
</MoreInformation>
</MoreInformation>
</MoreInformation>
From SharePoint logs: I get following exception details:
01/02/2013 11:00:34.17            w3wp.exe (0x0828)        0x2AEC SharePoint Foundation Claims Authentication
bz7l        Medium
SPSecurityContext: Could not retrieve a valid windows identity for username 'DOMAIN\user' with UPN 'user@domain'. UPN is required when Kerberos
constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException: The message could not be dispatched because the service at the endpoint address 'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' is unavailable for the
protocol of the address.    Server stack trace:      at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder, IConnection connection, Uri via, String contentType, TimeoutHelper&
timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection
connection, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan
timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan
timeout)     at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)     at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String
upn, Int32 pid)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)     at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().
a1bef09b-025a-208e-cd5e-4ef6678b6d0d
Any help on how to get this resolved would be greatly appreciated.

Hi GuYuming
I have already read the mentioned blog. Code mentioned there gives me the following output.
I have already verified that the c2WTS service is running and it's dependency 'Cryptographic services' is also running.
Where is the root cause? How can I resolve this?
Output of the code on the mentioned blog:
Testing Service c2WTS
+- Service c2WTS found
+- Service c2WTS is running
+- Path of service: C:\Program Files\Windows Identity Foundation\v3.5\c2wtshost.exe
+- Config File: C:\Program Files\Windows Identity Foundation\v3.5\c2wtshost.exe.config
+- Service Logon: SYSTEM\NT AUTHORITY
----- start of config file ----
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="windowsTokenService" type="Microsoft.IdentityModel.WindowsTokenService.Configuration.WindowsTokenServiceSection, Microsoft.IdentityModel.WindowsTokenService, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
/>
</configSections>
<startup>
<supportedRuntime version="v4.0" />
<supportedRuntime version="v2.0.50727" />
</startup>
<windowsTokenService>

<allowedCallers>
<clear />
<add value="WSS_WPG" />
</allowedCallers>
</windowsTokenService>
</configuration>
----- end of config file ----
Retrieving security groups/users allowed to use the service from config file
+- WSS_WPG
Trying to login .........
Using current Windows Credentials
***** c2WTS could not provide a valid Windows Token. Reason: WTS0003: The caller is not authorized to access the service.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at c2WTSTest.Form1.button2_Click(Object sender, EventArgs e)
Now Verifying if user DOMAIN/monish has rights on c2WTS
+- User DOMAIN/monish has no access to the service
*** Analysis Complete ***
Monish Gupta

EnvironmentException: -600: Could not retrieve a datasource connection

Similar Messages

Maybe you are looking for